Message ID | 20240314185957.36940-3-hchauhan@ventanamicro.com |
---|---|
State | New |
Headers | show |
Series | Introduce sdtrig ISA extension | expand |
On Fri, Mar 15, 2024 at 12:29:55AM +0530, Himanshu Chauhan wrote: > The mcontrol6 triggers are not defined in debug specification v0.13 > These triggers are defined in sdtrig ISA extension. > > This patch: > * Adds ext_sdtrig capability which is used to select mcontrol6 triggers > * Keeps the debug property. All triggers that are defined in v0.13 are > exposed. > > Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com> > --- > target/riscv/cpu.c | 5 +++++ > target/riscv/cpu_cfg.h | 1 + > target/riscv/debug.c | 30 +++++++++++++++++++++++++----- > 3 files changed, 31 insertions(+), 5 deletions(-) > > diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c > index c160b9216b..ab631500ac 100644 > --- a/target/riscv/cpu.c > +++ b/target/riscv/cpu.c > @@ -1008,6 +1008,11 @@ static void riscv_cpu_reset_hold(Object *obj) > set_default_nan_mode(1, &env->fp_status); > > #ifndef CONFIG_USER_ONLY > + if (!cpu->cfg.debug && cpu->cfg.ext_sdtrig) { > + warn_report("Enabling 'debug' since 'sdtrig' is enabled."); > + cpu->cfg.debug = true; > + } > + > if (cpu->cfg.debug) { > riscv_trigger_reset_hold(env); > } > diff --git a/target/riscv/cpu_cfg.h b/target/riscv/cpu_cfg.h > index 2040b90da0..0c57e1acd4 100644 > --- a/target/riscv/cpu_cfg.h > +++ b/target/riscv/cpu_cfg.h > @@ -114,6 +114,7 @@ struct RISCVCPUConfig { > bool ext_zvfbfwma; > bool ext_zvfh; > bool ext_zvfhmin; > + bool ext_sdtrig; > bool ext_smaia; > bool ext_ssaia; > bool ext_sscofpmf; > diff --git a/target/riscv/debug.c b/target/riscv/debug.c > index 5f14b39b06..c40e727e12 100644 > --- a/target/riscv/debug.c > +++ b/target/riscv/debug.c > @@ -100,13 +100,16 @@ static trigger_action_t get_trigger_action(CPURISCVState *env, > target_ulong tdata1 = env->tdata1[trigger_index]; > int trigger_type = get_trigger_type(env, trigger_index); > trigger_action_t action = DBG_ACTION_NONE; > + const RISCVCPUConfig *cfg = riscv_cpu_cfg(env); > > switch (trigger_type) { > case TRIGGER_TYPE_AD_MATCH: > action = (tdata1 & TYPE2_ACTION) >> 12; > break; > case TRIGGER_TYPE_AD_MATCH6: > - action = (tdata1 & TYPE6_ACTION) >> 12; > + if (cfg->ext_sdtrig) { > + action = (tdata1 & TYPE6_ACTION) >> 12; > + } > break; > case TRIGGER_TYPE_INST_CNT: > case TRIGGER_TYPE_INT: > @@ -727,7 +730,12 @@ void tdata_csr_write(CPURISCVState *env, int tdata_index, target_ulong val) > type2_reg_write(env, env->trigger_cur, tdata_index, val); > break; > case TRIGGER_TYPE_AD_MATCH6: > - type6_reg_write(env, env->trigger_cur, tdata_index, val); > + if (riscv_cpu_cfg(env)->ext_sdtrig) { > + type6_reg_write(env, env->trigger_cur, tdata_index, val); > + } else { > + qemu_log_mask(LOG_UNIMP, "trigger type: %d is not supported\n", > + trigger_type); > + } > break; > case TRIGGER_TYPE_INST_CNT: > itrigger_reg_write(env, env->trigger_cur, tdata_index, val); > @@ -750,9 +758,13 @@ void tdata_csr_write(CPURISCVState *env, int tdata_index, target_ulong val) > > target_ulong tinfo_csr_read(CPURISCVState *env) > { > - /* assume all triggers support the same types of triggers */ > - return BIT(TRIGGER_TYPE_AD_MATCH) | > - BIT(TRIGGER_TYPE_AD_MATCH6); > + target_ulong ts = BIT(TRIGGER_TYPE_AD_MATCH); > + > + if (riscv_cpu_cfg(env)->ext_sdtrig) { > + ts |= BIT(TRIGGER_TYPE_AD_MATCH6); > + } > + > + return ts; > } > > void riscv_cpu_debug_excp_handler(CPUState *cs) > @@ -803,6 +815,10 @@ bool riscv_cpu_debug_check_breakpoint(CPUState *cs) > } > break; > case TRIGGER_TYPE_AD_MATCH6: > + if (!cpu->cfg.ext_sdtrig) { > + break; > + } > + > ctrl = env->tdata1[i]; > pc = env->tdata2[i]; > > @@ -869,6 +885,10 @@ bool riscv_cpu_debug_check_watchpoint(CPUState *cs, CPUWatchpoint *wp) > } > break; > case TRIGGER_TYPE_AD_MATCH6: > + if (!cpu->cfg.ext_sdtrig) { > + break; > + } > + > ctrl = env->tdata1[i]; > addr = env->tdata2[i]; > flags = 0; > -- > 2.34.1 > Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
On Fri, Mar 15, 2024 at 5:01 AM Himanshu Chauhan <hchauhan@ventanamicro.com> wrote: > > The mcontrol6 triggers are not defined in debug specification v0.13 > These triggers are defined in sdtrig ISA extension. > > This patch: > * Adds ext_sdtrig capability which is used to select mcontrol6 triggers > * Keeps the debug property. All triggers that are defined in v0.13 are > exposed. Thanks for this! > > Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com> > --- > target/riscv/cpu.c | 5 +++++ > target/riscv/cpu_cfg.h | 1 + > target/riscv/debug.c | 30 +++++++++++++++++++++++++----- > 3 files changed, 31 insertions(+), 5 deletions(-) > > diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c > index c160b9216b..ab631500ac 100644 > --- a/target/riscv/cpu.c > +++ b/target/riscv/cpu.c > @@ -1008,6 +1008,11 @@ static void riscv_cpu_reset_hold(Object *obj) > set_default_nan_mode(1, &env->fp_status); > > #ifndef CONFIG_USER_ONLY > + if (!cpu->cfg.debug && cpu->cfg.ext_sdtrig) { > + warn_report("Enabling 'debug' since 'sdtrig' is enabled."); I don't think we need the warning. It isn't a problem for the user Otherwise Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Alistair > + cpu->cfg.debug = true; > + } > + > if (cpu->cfg.debug) { > riscv_trigger_reset_hold(env); > } > diff --git a/target/riscv/cpu_cfg.h b/target/riscv/cpu_cfg.h > index 2040b90da0..0c57e1acd4 100644 > --- a/target/riscv/cpu_cfg.h > +++ b/target/riscv/cpu_cfg.h > @@ -114,6 +114,7 @@ struct RISCVCPUConfig { > bool ext_zvfbfwma; > bool ext_zvfh; > bool ext_zvfhmin; > + bool ext_sdtrig; > bool ext_smaia; > bool ext_ssaia; > bool ext_sscofpmf; > diff --git a/target/riscv/debug.c b/target/riscv/debug.c > index 5f14b39b06..c40e727e12 100644 > --- a/target/riscv/debug.c > +++ b/target/riscv/debug.c > @@ -100,13 +100,16 @@ static trigger_action_t get_trigger_action(CPURISCVState *env, > target_ulong tdata1 = env->tdata1[trigger_index]; > int trigger_type = get_trigger_type(env, trigger_index); > trigger_action_t action = DBG_ACTION_NONE; > + const RISCVCPUConfig *cfg = riscv_cpu_cfg(env); > > switch (trigger_type) { > case TRIGGER_TYPE_AD_MATCH: > action = (tdata1 & TYPE2_ACTION) >> 12; > break; > case TRIGGER_TYPE_AD_MATCH6: > - action = (tdata1 & TYPE6_ACTION) >> 12; > + if (cfg->ext_sdtrig) { > + action = (tdata1 & TYPE6_ACTION) >> 12; > + } > break; > case TRIGGER_TYPE_INST_CNT: > case TRIGGER_TYPE_INT: > @@ -727,7 +730,12 @@ void tdata_csr_write(CPURISCVState *env, int tdata_index, target_ulong val) > type2_reg_write(env, env->trigger_cur, tdata_index, val); > break; > case TRIGGER_TYPE_AD_MATCH6: > - type6_reg_write(env, env->trigger_cur, tdata_index, val); > + if (riscv_cpu_cfg(env)->ext_sdtrig) { > + type6_reg_write(env, env->trigger_cur, tdata_index, val); > + } else { > + qemu_log_mask(LOG_UNIMP, "trigger type: %d is not supported\n", > + trigger_type); > + } > break; > case TRIGGER_TYPE_INST_CNT: > itrigger_reg_write(env, env->trigger_cur, tdata_index, val); > @@ -750,9 +758,13 @@ void tdata_csr_write(CPURISCVState *env, int tdata_index, target_ulong val) > > target_ulong tinfo_csr_read(CPURISCVState *env) > { > - /* assume all triggers support the same types of triggers */ > - return BIT(TRIGGER_TYPE_AD_MATCH) | > - BIT(TRIGGER_TYPE_AD_MATCH6); > + target_ulong ts = BIT(TRIGGER_TYPE_AD_MATCH); > + > + if (riscv_cpu_cfg(env)->ext_sdtrig) { > + ts |= BIT(TRIGGER_TYPE_AD_MATCH6); > + } > + > + return ts; > } > > void riscv_cpu_debug_excp_handler(CPUState *cs) > @@ -803,6 +815,10 @@ bool riscv_cpu_debug_check_breakpoint(CPUState *cs) > } > break; > case TRIGGER_TYPE_AD_MATCH6: > + if (!cpu->cfg.ext_sdtrig) { > + break; > + } > + > ctrl = env->tdata1[i]; > pc = env->tdata2[i]; > > @@ -869,6 +885,10 @@ bool riscv_cpu_debug_check_watchpoint(CPUState *cs, CPUWatchpoint *wp) > } > break; > case TRIGGER_TYPE_AD_MATCH6: > + if (!cpu->cfg.ext_sdtrig) { > + break; > + } > + > ctrl = env->tdata1[i]; > addr = env->tdata2[i]; > flags = 0; > -- > 2.34.1 > >
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index c160b9216b..ab631500ac 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -1008,6 +1008,11 @@ static void riscv_cpu_reset_hold(Object *obj) set_default_nan_mode(1, &env->fp_status); #ifndef CONFIG_USER_ONLY + if (!cpu->cfg.debug && cpu->cfg.ext_sdtrig) { + warn_report("Enabling 'debug' since 'sdtrig' is enabled."); + cpu->cfg.debug = true; + } + if (cpu->cfg.debug) { riscv_trigger_reset_hold(env); } diff --git a/target/riscv/cpu_cfg.h b/target/riscv/cpu_cfg.h index 2040b90da0..0c57e1acd4 100644 --- a/target/riscv/cpu_cfg.h +++ b/target/riscv/cpu_cfg.h @@ -114,6 +114,7 @@ struct RISCVCPUConfig { bool ext_zvfbfwma; bool ext_zvfh; bool ext_zvfhmin; + bool ext_sdtrig; bool ext_smaia; bool ext_ssaia; bool ext_sscofpmf; diff --git a/target/riscv/debug.c b/target/riscv/debug.c index 5f14b39b06..c40e727e12 100644 --- a/target/riscv/debug.c +++ b/target/riscv/debug.c @@ -100,13 +100,16 @@ static trigger_action_t get_trigger_action(CPURISCVState *env, target_ulong tdata1 = env->tdata1[trigger_index]; int trigger_type = get_trigger_type(env, trigger_index); trigger_action_t action = DBG_ACTION_NONE; + const RISCVCPUConfig *cfg = riscv_cpu_cfg(env); switch (trigger_type) { case TRIGGER_TYPE_AD_MATCH: action = (tdata1 & TYPE2_ACTION) >> 12; break; case TRIGGER_TYPE_AD_MATCH6: - action = (tdata1 & TYPE6_ACTION) >> 12; + if (cfg->ext_sdtrig) { + action = (tdata1 & TYPE6_ACTION) >> 12; + } break; case TRIGGER_TYPE_INST_CNT: case TRIGGER_TYPE_INT: @@ -727,7 +730,12 @@ void tdata_csr_write(CPURISCVState *env, int tdata_index, target_ulong val) type2_reg_write(env, env->trigger_cur, tdata_index, val); break; case TRIGGER_TYPE_AD_MATCH6: - type6_reg_write(env, env->trigger_cur, tdata_index, val); + if (riscv_cpu_cfg(env)->ext_sdtrig) { + type6_reg_write(env, env->trigger_cur, tdata_index, val); + } else { + qemu_log_mask(LOG_UNIMP, "trigger type: %d is not supported\n", + trigger_type); + } break; case TRIGGER_TYPE_INST_CNT: itrigger_reg_write(env, env->trigger_cur, tdata_index, val); @@ -750,9 +758,13 @@ void tdata_csr_write(CPURISCVState *env, int tdata_index, target_ulong val) target_ulong tinfo_csr_read(CPURISCVState *env) { - /* assume all triggers support the same types of triggers */ - return BIT(TRIGGER_TYPE_AD_MATCH) | - BIT(TRIGGER_TYPE_AD_MATCH6); + target_ulong ts = BIT(TRIGGER_TYPE_AD_MATCH); + + if (riscv_cpu_cfg(env)->ext_sdtrig) { + ts |= BIT(TRIGGER_TYPE_AD_MATCH6); + } + + return ts; } void riscv_cpu_debug_excp_handler(CPUState *cs) @@ -803,6 +815,10 @@ bool riscv_cpu_debug_check_breakpoint(CPUState *cs) } break; case TRIGGER_TYPE_AD_MATCH6: + if (!cpu->cfg.ext_sdtrig) { + break; + } + ctrl = env->tdata1[i]; pc = env->tdata2[i]; @@ -869,6 +885,10 @@ bool riscv_cpu_debug_check_watchpoint(CPUState *cs, CPUWatchpoint *wp) } break; case TRIGGER_TYPE_AD_MATCH6: + if (!cpu->cfg.ext_sdtrig) { + break; + } + ctrl = env->tdata1[i]; addr = env->tdata2[i]; flags = 0;
The mcontrol6 triggers are not defined in debug specification v0.13 These triggers are defined in sdtrig ISA extension. This patch: * Adds ext_sdtrig capability which is used to select mcontrol6 triggers * Keeps the debug property. All triggers that are defined in v0.13 are exposed. Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com> --- target/riscv/cpu.c | 5 +++++ target/riscv/cpu_cfg.h | 1 + target/riscv/debug.c | 30 +++++++++++++++++++++++++----- 3 files changed, 31 insertions(+), 5 deletions(-)