diff mbox series

[v7,07/11] target/riscv: Save counter values during countinhibit update

Message ID 20240626-smcntrpmf_v7-v7-7-bb0f10af7fa9@rivosinc.com
State New
Headers show
Series Add RISC-V ISA extension smcntrpmf support | expand

Commit Message

Atish Kumar Patra June 26, 2024, 11:57 p.m. UTC
Currently, if a counter monitoring cycle/instret is stopped via
mcountinhibit we just update the state while the value is saved
during the next read. This is not accurate as the read may happen
many cycles after the counter is stopped. Ideally, the read should
return the value saved when the counter is stopped.

Thus, save the value of the counter during the inhibit update
operation and return that value during the read if corresponding bit
in mcountihibit is set.

Signed-off-by: Atish Patra <atishp@rivosinc.com>
---
 target/riscv/cpu.h     |  1 -
 target/riscv/csr.c     | 34 ++++++++++++++++++++++------------
 target/riscv/machine.c |  5 ++---
 3 files changed, 24 insertions(+), 16 deletions(-)

Comments

Daniel Henrique Barboza July 1, 2024, 7:34 p.m. UTC | #1
On 6/26/24 8:57 PM, Atish Patra wrote:
> Currently, if a counter monitoring cycle/instret is stopped via
> mcountinhibit we just update the state while the value is saved
> during the next read. This is not accurate as the read may happen
> many cycles after the counter is stopped. Ideally, the read should
> return the value saved when the counter is stopped.
> 
> Thus, save the value of the counter during the inhibit update
> operation and return that value during the read if corresponding bit
> in mcountihibit is set.
> 
> Signed-off-by: Atish Patra <atishp@rivosinc.com>
> ---

Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>


>   target/riscv/cpu.h     |  1 -
>   target/riscv/csr.c     | 34 ++++++++++++++++++++++------------
>   target/riscv/machine.c |  5 ++---
>   3 files changed, 24 insertions(+), 16 deletions(-)
> 
> diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
> index d56d640b06be..91fe2a46ba35 100644
> --- a/target/riscv/cpu.h
> +++ b/target/riscv/cpu.h
> @@ -153,7 +153,6 @@ typedef struct PMUCTRState {
>       target_ulong mhpmcounter_prev;
>       /* Snapshort value of a counter in RV32 */
>       target_ulong mhpmcounterh_prev;
> -    bool started;
>       /* Value beyond UINT32_MAX/UINT64_MAX before overflow interrupt trigger */
>       target_ulong irq_overflow_left;
>   } PMUCTRState;
> diff --git a/target/riscv/csr.c b/target/riscv/csr.c
> index c292d036bcb2..e4adfa324efe 100644
> --- a/target/riscv/csr.c
> +++ b/target/riscv/csr.c
> @@ -1062,17 +1062,11 @@ static RISCVException riscv_pmu_read_ctr(CPURISCVState *env, target_ulong *val,
>   
>       if (get_field(env->mcountinhibit, BIT(ctr_idx))) {
>           /*
> -         * Counter should not increment if inhibit bit is set. We can't really
> -         * stop the icount counting. Just return the counter value written by
> -         * the supervisor to indicate that counter was not incremented.
> +         * Counter should not increment if inhibit bit is set. Just return the
> +         * current counter value.
>            */
> -        if (!counter->started) {
> -            *val = ctr_val;
> -            return RISCV_EXCP_NONE;
> -        } else {
> -            /* Mark that the counter has been stopped */
> -            counter->started = false;
> -        }
> +         *val = ctr_val;
> +         return RISCV_EXCP_NONE;
>       }
>   
>       /*
> @@ -2114,9 +2108,25 @@ static RISCVException write_mcountinhibit(CPURISCVState *env, int csrno,
>   
>       /* Check if any other counter is also monitoring cycles/instructions */
>       for (cidx = 0; cidx < RV_MAX_MHPMCOUNTERS; cidx++) {
> -        if (!get_field(env->mcountinhibit, BIT(cidx))) {
>               counter = &env->pmu_ctrs[cidx];
> -            counter->started = true;
> +        if (get_field(env->mcountinhibit, BIT(cidx)) && (val & BIT(cidx))) {
> +            /*
> +             * Update the counter value for cycle/instret as we can't stop the
> +             * host ticks. But we should show the current value at this moment.
> +             */
> +            if (riscv_pmu_ctr_monitor_cycles(env, cidx) ||
> +                riscv_pmu_ctr_monitor_instructions(env, cidx)) {
> +                counter->mhpmcounter_val =
> +                    riscv_pmu_ctr_get_fixed_counters_val(env, cidx, false) -
> +                                           counter->mhpmcounter_prev +
> +                                           counter->mhpmcounter_val;
> +                if (riscv_cpu_mxl(env) == MXL_RV32) {
> +                    counter->mhpmcounterh_val =
> +                        riscv_pmu_ctr_get_fixed_counters_val(env, cidx, true) -
> +                                                counter->mhpmcounterh_prev +
> +                                                counter->mhpmcounterh_val;
> +                }
> +            }
>           }
>       }
>   
> diff --git a/target/riscv/machine.c b/target/riscv/machine.c
> index 76f2150f78b5..492c2c6d9d79 100644
> --- a/target/riscv/machine.c
> +++ b/target/riscv/machine.c
> @@ -320,15 +320,14 @@ static bool pmu_needed(void *opaque)
>   
>   static const VMStateDescription vmstate_pmu_ctr_state = {
>       .name = "cpu/pmu",
> -    .version_id = 1,
> -    .minimum_version_id = 1,
> +    .version_id = 2,
> +    .minimum_version_id = 2,
>       .needed = pmu_needed,
>       .fields = (const VMStateField[]) {
>           VMSTATE_UINTTL(mhpmcounter_val, PMUCTRState),
>           VMSTATE_UINTTL(mhpmcounterh_val, PMUCTRState),
>           VMSTATE_UINTTL(mhpmcounter_prev, PMUCTRState),
>           VMSTATE_UINTTL(mhpmcounterh_prev, PMUCTRState),
> -        VMSTATE_BOOL(started, PMUCTRState),
>           VMSTATE_END_OF_LIST()
>       }
>   };
>
Alistair Francis July 3, 2024, 2:03 a.m. UTC | #2
On Thu, Jun 27, 2024 at 9:58 AM Atish Patra <atishp@rivosinc.com> wrote:
>
> Currently, if a counter monitoring cycle/instret is stopped via
> mcountinhibit we just update the state while the value is saved
> during the next read. This is not accurate as the read may happen
> many cycles after the counter is stopped. Ideally, the read should
> return the value saved when the counter is stopped.
>
> Thus, save the value of the counter during the inhibit update
> operation and return that value during the read if corresponding bit
> in mcountihibit is set.
>
> Signed-off-by: Atish Patra <atishp@rivosinc.com>

Acked-by: Alistair Francis <alistair.francis@wdc.com>

Alistair

> ---
>  target/riscv/cpu.h     |  1 -
>  target/riscv/csr.c     | 34 ++++++++++++++++++++++------------
>  target/riscv/machine.c |  5 ++---
>  3 files changed, 24 insertions(+), 16 deletions(-)
>
> diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
> index d56d640b06be..91fe2a46ba35 100644
> --- a/target/riscv/cpu.h
> +++ b/target/riscv/cpu.h
> @@ -153,7 +153,6 @@ typedef struct PMUCTRState {
>      target_ulong mhpmcounter_prev;
>      /* Snapshort value of a counter in RV32 */
>      target_ulong mhpmcounterh_prev;
> -    bool started;
>      /* Value beyond UINT32_MAX/UINT64_MAX before overflow interrupt trigger */
>      target_ulong irq_overflow_left;
>  } PMUCTRState;
> diff --git a/target/riscv/csr.c b/target/riscv/csr.c
> index c292d036bcb2..e4adfa324efe 100644
> --- a/target/riscv/csr.c
> +++ b/target/riscv/csr.c
> @@ -1062,17 +1062,11 @@ static RISCVException riscv_pmu_read_ctr(CPURISCVState *env, target_ulong *val,
>
>      if (get_field(env->mcountinhibit, BIT(ctr_idx))) {
>          /*
> -         * Counter should not increment if inhibit bit is set. We can't really
> -         * stop the icount counting. Just return the counter value written by
> -         * the supervisor to indicate that counter was not incremented.
> +         * Counter should not increment if inhibit bit is set. Just return the
> +         * current counter value.
>           */
> -        if (!counter->started) {
> -            *val = ctr_val;
> -            return RISCV_EXCP_NONE;
> -        } else {
> -            /* Mark that the counter has been stopped */
> -            counter->started = false;
> -        }
> +         *val = ctr_val;
> +         return RISCV_EXCP_NONE;
>      }
>
>      /*
> @@ -2114,9 +2108,25 @@ static RISCVException write_mcountinhibit(CPURISCVState *env, int csrno,
>
>      /* Check if any other counter is also monitoring cycles/instructions */
>      for (cidx = 0; cidx < RV_MAX_MHPMCOUNTERS; cidx++) {
> -        if (!get_field(env->mcountinhibit, BIT(cidx))) {
>              counter = &env->pmu_ctrs[cidx];
> -            counter->started = true;
> +        if (get_field(env->mcountinhibit, BIT(cidx)) && (val & BIT(cidx))) {
> +            /*
> +             * Update the counter value for cycle/instret as we can't stop the
> +             * host ticks. But we should show the current value at this moment.
> +             */
> +            if (riscv_pmu_ctr_monitor_cycles(env, cidx) ||
> +                riscv_pmu_ctr_monitor_instructions(env, cidx)) {
> +                counter->mhpmcounter_val =
> +                    riscv_pmu_ctr_get_fixed_counters_val(env, cidx, false) -
> +                                           counter->mhpmcounter_prev +
> +                                           counter->mhpmcounter_val;
> +                if (riscv_cpu_mxl(env) == MXL_RV32) {
> +                    counter->mhpmcounterh_val =
> +                        riscv_pmu_ctr_get_fixed_counters_val(env, cidx, true) -
> +                                                counter->mhpmcounterh_prev +
> +                                                counter->mhpmcounterh_val;
> +                }
> +            }
>          }
>      }
>
> diff --git a/target/riscv/machine.c b/target/riscv/machine.c
> index 76f2150f78b5..492c2c6d9d79 100644
> --- a/target/riscv/machine.c
> +++ b/target/riscv/machine.c
> @@ -320,15 +320,14 @@ static bool pmu_needed(void *opaque)
>
>  static const VMStateDescription vmstate_pmu_ctr_state = {
>      .name = "cpu/pmu",
> -    .version_id = 1,
> -    .minimum_version_id = 1,
> +    .version_id = 2,
> +    .minimum_version_id = 2,
>      .needed = pmu_needed,
>      .fields = (const VMStateField[]) {
>          VMSTATE_UINTTL(mhpmcounter_val, PMUCTRState),
>          VMSTATE_UINTTL(mhpmcounterh_val, PMUCTRState),
>          VMSTATE_UINTTL(mhpmcounter_prev, PMUCTRState),
>          VMSTATE_UINTTL(mhpmcounterh_prev, PMUCTRState),
> -        VMSTATE_BOOL(started, PMUCTRState),
>          VMSTATE_END_OF_LIST()
>      }
>  };
>
> --
> 2.34.1
>
>
diff mbox series

Patch

diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
index d56d640b06be..91fe2a46ba35 100644
--- a/target/riscv/cpu.h
+++ b/target/riscv/cpu.h
@@ -153,7 +153,6 @@  typedef struct PMUCTRState {
     target_ulong mhpmcounter_prev;
     /* Snapshort value of a counter in RV32 */
     target_ulong mhpmcounterh_prev;
-    bool started;
     /* Value beyond UINT32_MAX/UINT64_MAX before overflow interrupt trigger */
     target_ulong irq_overflow_left;
 } PMUCTRState;
diff --git a/target/riscv/csr.c b/target/riscv/csr.c
index c292d036bcb2..e4adfa324efe 100644
--- a/target/riscv/csr.c
+++ b/target/riscv/csr.c
@@ -1062,17 +1062,11 @@  static RISCVException riscv_pmu_read_ctr(CPURISCVState *env, target_ulong *val,
 
     if (get_field(env->mcountinhibit, BIT(ctr_idx))) {
         /*
-         * Counter should not increment if inhibit bit is set. We can't really
-         * stop the icount counting. Just return the counter value written by
-         * the supervisor to indicate that counter was not incremented.
+         * Counter should not increment if inhibit bit is set. Just return the
+         * current counter value.
          */
-        if (!counter->started) {
-            *val = ctr_val;
-            return RISCV_EXCP_NONE;
-        } else {
-            /* Mark that the counter has been stopped */
-            counter->started = false;
-        }
+         *val = ctr_val;
+         return RISCV_EXCP_NONE;
     }
 
     /*
@@ -2114,9 +2108,25 @@  static RISCVException write_mcountinhibit(CPURISCVState *env, int csrno,
 
     /* Check if any other counter is also monitoring cycles/instructions */
     for (cidx = 0; cidx < RV_MAX_MHPMCOUNTERS; cidx++) {
-        if (!get_field(env->mcountinhibit, BIT(cidx))) {
             counter = &env->pmu_ctrs[cidx];
-            counter->started = true;
+        if (get_field(env->mcountinhibit, BIT(cidx)) && (val & BIT(cidx))) {
+            /*
+             * Update the counter value for cycle/instret as we can't stop the
+             * host ticks. But we should show the current value at this moment.
+             */
+            if (riscv_pmu_ctr_monitor_cycles(env, cidx) ||
+                riscv_pmu_ctr_monitor_instructions(env, cidx)) {
+                counter->mhpmcounter_val =
+                    riscv_pmu_ctr_get_fixed_counters_val(env, cidx, false) -
+                                           counter->mhpmcounter_prev +
+                                           counter->mhpmcounter_val;
+                if (riscv_cpu_mxl(env) == MXL_RV32) {
+                    counter->mhpmcounterh_val =
+                        riscv_pmu_ctr_get_fixed_counters_val(env, cidx, true) -
+                                                counter->mhpmcounterh_prev +
+                                                counter->mhpmcounterh_val;
+                }
+            }
         }
     }
 
diff --git a/target/riscv/machine.c b/target/riscv/machine.c
index 76f2150f78b5..492c2c6d9d79 100644
--- a/target/riscv/machine.c
+++ b/target/riscv/machine.c
@@ -320,15 +320,14 @@  static bool pmu_needed(void *opaque)
 
 static const VMStateDescription vmstate_pmu_ctr_state = {
     .name = "cpu/pmu",
-    .version_id = 1,
-    .minimum_version_id = 1,
+    .version_id = 2,
+    .minimum_version_id = 2,
     .needed = pmu_needed,
     .fields = (const VMStateField[]) {
         VMSTATE_UINTTL(mhpmcounter_val, PMUCTRState),
         VMSTATE_UINTTL(mhpmcounterh_val, PMUCTRState),
         VMSTATE_UINTTL(mhpmcounter_prev, PMUCTRState),
         VMSTATE_UINTTL(mhpmcounterh_prev, PMUCTRState),
-        VMSTATE_BOOL(started, PMUCTRState),
         VMSTATE_END_OF_LIST()
     }
 };