diff mbox series

target/riscv: update checks on writing pmpcfg for ePMP to version 1.0

Message ID 20230904161959.1766-1-alvinga@andestech.com
State New
Headers show
Series target/riscv: update checks on writing pmpcfg for ePMP to version 1.0 | expand

Commit Message

Alvin Chang Sept. 4, 2023, 4:19 p.m. UTC
Current checks on writing pmpcfg for ePMP follows ePMP version 0.9.1.
However, ePMP specification has already been ratified, and there are
some differences between version 0.9.1 and 1.0. In this commit we update
the checks of writing pmpcfg to follow ePMP version 1.0.

When mseccfg.MML is set, the constraints to modify PMP rules are:
1. Locked rules cannot be removed or modified until a PMP reset, unless
   mseccfg.RLB is set.
2. From Smepmp specification version 1.0, chapter 2 section 4b:
   Adding a rule with executable privileges that either is M-mode-only
   or a locked Shared-Region is not possible and such pmpcfg writes are
   ignored, leaving pmpcfg unchanged.

The commit transfers the value of pmpcfg into the index of the ePMP
truth table, and checks the rules by aforementioned specification
changes.

Signed-off-by: Alvin Chang <alvinga@andestech.com>
---
 target/riscv/pmp.c | 51 ++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 42 insertions(+), 9 deletions(-)

Comments

Alistair Francis Sept. 7, 2023, 3:11 a.m. UTC | #1
On Tue, Sep 5, 2023 at 2:30 AM Alvin Chang <vivahavey@gmail.com> wrote:
>
> Current checks on writing pmpcfg for ePMP follows ePMP version 0.9.1.
> However, ePMP specification has already been ratified, and there are
> some differences between version 0.9.1 and 1.0. In this commit we update
> the checks of writing pmpcfg to follow ePMP version 1.0.
>
> When mseccfg.MML is set, the constraints to modify PMP rules are:
> 1. Locked rules cannot be removed or modified until a PMP reset, unless
>    mseccfg.RLB is set.
> 2. From Smepmp specification version 1.0, chapter 2 section 4b:
>    Adding a rule with executable privileges that either is M-mode-only
>    or a locked Shared-Region is not possible and such pmpcfg writes are
>    ignored, leaving pmpcfg unchanged.
>
> The commit transfers the value of pmpcfg into the index of the ePMP
> truth table, and checks the rules by aforementioned specification
> changes.
>
> Signed-off-by: Alvin Chang <alvinga@andestech.com>

Thanks for the patch!

As part of this change we should convert ePMP over to Smepmp and drop
the experimental status

Alistair

> ---
>  target/riscv/pmp.c | 51 ++++++++++++++++++++++++++++++++++++++--------
>  1 file changed, 42 insertions(+), 9 deletions(-)
>
> diff --git a/target/riscv/pmp.c b/target/riscv/pmp.c
> index a08cd95658..c036ca3e70 100644
> --- a/target/riscv/pmp.c
> +++ b/target/riscv/pmp.c
> @@ -99,16 +99,49 @@ static void pmp_write_cfg(CPURISCVState *env, uint32_t pmp_index, uint8_t val)
>                  locked = false;
>              }
>
> -            /* mseccfg.MML is set */
> -            if (MSECCFG_MML_ISSET(env)) {
> -                /* not adding execute bit */
> -                if ((val & PMP_LOCK) != 0 && (val & PMP_EXEC) != PMP_EXEC) {
> -                    locked = false;
> -                }
> -                /* shared region and not adding X bit */
> -                if ((val & PMP_LOCK) != PMP_LOCK &&
> -                    (val & 0x7) != (PMP_WRITE | PMP_EXEC)) {
> +            /*
> +             * mseccfg.MML is set. Locked rules cannot be removed or modified
> +             * until a PMP reset. Besides, from Smepmp specification version 1.0
> +             * , chapter 2 section 4b says:
> +             * Adding a rule with executable privileges that either is
> +             * M-mode-only or a locked Shared-Region is not possible and such
> +             * pmpcfg writes are ignored, leaving pmpcfg unchanged.
> +             */
> +            if (MSECCFG_MML_ISSET(env) && !pmp_is_locked(env, pmp_index)) {
> +                /*
> +                 * Convert the PMP permissions to match the truth table in the
> +                 * ePMP spec.
> +                 */
> +                const uint8_t epmp_operation =
> +                    ((val & PMP_LOCK) >> 4) | ((val & PMP_READ) << 2) |
> +                    (val & PMP_WRITE) | ((val & PMP_EXEC) >> 2);
> +
> +                switch (epmp_operation) {
> +                /* pmpcfg.L = 0. Neither M-mode-only nor locked Shared-Region */
> +                case 0:
> +                case 1:
> +                case 2:
> +                case 3:
> +                case 4:
> +                case 5:
> +                case 6:
> +                case 7:
> +                /* pmpcfg.L = 1 and pmpcfg.X = 0 (but case 10 is not allowed) */
> +                case 8:
> +                case 12:
> +                case 14:
> +                /* pmpcfg.LRWX = 1111 */
> +                case 15:  /* Read-only locked Shared-Region on all modes */
>                      locked = false;
> +                    break;
> +                /* Other rules which add new code regions are not allowed */
> +                case 9:
> +                case 10:  /* Execute-only locked Shared-Region on all modes */
> +                case 11:
> +                case 13:
> +                    break;
> +                default:
> +                    g_assert_not_reached();
>                  }
>              }
>          } else {
> --
> 2.34.1
>
>
diff mbox series

Patch

diff --git a/target/riscv/pmp.c b/target/riscv/pmp.c
index a08cd95658..c036ca3e70 100644
--- a/target/riscv/pmp.c
+++ b/target/riscv/pmp.c
@@ -99,16 +99,49 @@  static void pmp_write_cfg(CPURISCVState *env, uint32_t pmp_index, uint8_t val)
                 locked = false;
             }
 
-            /* mseccfg.MML is set */
-            if (MSECCFG_MML_ISSET(env)) {
-                /* not adding execute bit */
-                if ((val & PMP_LOCK) != 0 && (val & PMP_EXEC) != PMP_EXEC) {
-                    locked = false;
-                }
-                /* shared region and not adding X bit */
-                if ((val & PMP_LOCK) != PMP_LOCK &&
-                    (val & 0x7) != (PMP_WRITE | PMP_EXEC)) {
+            /*
+             * mseccfg.MML is set. Locked rules cannot be removed or modified
+             * until a PMP reset. Besides, from Smepmp specification version 1.0
+             * , chapter 2 section 4b says:
+             * Adding a rule with executable privileges that either is
+             * M-mode-only or a locked Shared-Region is not possible and such
+             * pmpcfg writes are ignored, leaving pmpcfg unchanged.
+             */
+            if (MSECCFG_MML_ISSET(env) && !pmp_is_locked(env, pmp_index)) {
+                /*
+                 * Convert the PMP permissions to match the truth table in the
+                 * ePMP spec.
+                 */
+                const uint8_t epmp_operation =
+                    ((val & PMP_LOCK) >> 4) | ((val & PMP_READ) << 2) |
+                    (val & PMP_WRITE) | ((val & PMP_EXEC) >> 2);
+
+                switch (epmp_operation) {
+                /* pmpcfg.L = 0. Neither M-mode-only nor locked Shared-Region */
+                case 0:
+                case 1:
+                case 2:
+                case 3:
+                case 4:
+                case 5:
+                case 6:
+                case 7:
+                /* pmpcfg.L = 1 and pmpcfg.X = 0 (but case 10 is not allowed) */
+                case 8:
+                case 12:
+                case 14:
+                /* pmpcfg.LRWX = 1111 */
+                case 15:  /* Read-only locked Shared-Region on all modes */
                     locked = false;
+                    break;
+                /* Other rules which add new code regions are not allowed */
+                case 9:
+                case 10:  /* Execute-only locked Shared-Region on all modes */
+                case 11:
+                case 13:
+                    break;
+                default:
+                    g_assert_not_reached();
                 }
             }
         } else {