From patchwork Tue Oct 18 12:17:23 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Quentin Schulz X-Patchwork-Id: 1691493 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@legolas.ozlabs.org Authentication-Results: legolas.ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=2620:137:e000::1:20; helo=out1.vger.email; envelope-from=linux-gpio-owner@vger.kernel.org; receiver=) Received: from out1.vger.email (out1.vger.email [IPv6:2620:137:e000::1:20]) by legolas.ozlabs.org (Postfix) with ESMTP id 4MsCYV1l30z23kT for ; Tue, 18 Oct 2022 23:17:50 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229744AbiJRMRs (ORCPT ); Tue, 18 Oct 2022 08:17:48 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:53622 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229453AbiJRMRr (ORCPT ); Tue, 18 Oct 2022 08:17:47 -0400 Received: from relay2-d.mail.gandi.net (relay2-d.mail.gandi.net [IPv6:2001:4b98:dc4:8::222]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4F61DA3463; Tue, 18 Oct 2022 05:17:46 -0700 (PDT) Received: (Authenticated sender: foss@0leil.net) by mail.gandi.net (Postfix) with ESMTPSA id 6BA7740003; Tue, 18 Oct 2022 12:17:42 +0000 (UTC) From: Quentin Schulz To: linus.walleij@linaro.org, heiko@sntech.de, david.wu@rock-chips.com Cc: linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org, foss+kernel@0leil.net, Quentin Schulz Subject: [PATCH] pinctrl: rockchip: list all pins in a possible mux route for PX30 Date: Tue, 18 Oct 2022 14:17:23 +0200 Message-Id: <20221017-upstream-px30-cif-clkoutm1-v1-0-4ea1389237f7@theobroma-systems.com> X-Mailer: git-send-email 2.37.3 MIME-Version: 1.0 X-Spam-Status: No, score=-2.6 required=5.0 tests=BAYES_00,RCVD_IN_DNSWL_LOW, SPF_HELO_NONE,SPF_NONE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org From: Quentin Schulz The mux routes are incomplete for the PX30. This was discovered because we had a HW design using cif-clkoutm1 with the correct pinmux in the Device Tree but the clock would still not work. There are actually two muxing required: the pin muxing (performed by the usual Device Tree pinctrl nodes) and the "function" muxing (m0 vs m1; performed by the mux routing inside the driver). The pin muxing was correct but the function muxing was not. This adds the missing pins and their configuration for the mux routes that are already specified in the driver. Note that there are some "conflicts": it is possible *in Device Tree* to (attempt to) mux the pins for e.g. clkoutm1 and clkinm0 at the same time but this is actually not possible in hardware (because both share the same bit for the function muxing). Since it is an impossible hardware design, it is not deemed necessary to prevent the user from attempting to "misconfigure" the pins/functions. Fixes: 87065ca9b8e5 ("pinctrl: rockchip: Add pinctrl support for PX30") Signed-off-by: Quentin Schulz --- rockchip: px30: fix missing m0/m1 function muxes m0/m1 The mux routes are incomplete for the PX30. This was discovered because we had a HW design using cif-clkoutm1 with the correct pinmux in the Device Tree but the clock would still not work. There are actually two muxing required: the pin muxing (performed by the usual Device Tree pinctrl nodes) and the "function" muxing (m0 vs m1; performed by the mux routing inside the driver). The pin muxing was correct but the function muxing was not. This adds the missing pins and their configuration for the mux routes that are already specified in the driver. Note that there are some "conflicts": it is possible *in Device Tree* to (attempt to) mux the pins for e.g. clkoutm1 and clkinm0 at the same time but this is actually not possible in hardware (because both share the same bit for the function muxing). Since it is an impossible hardware design, it is not deemed necessary to prevent the user from attempting to "misconfigure" the pins/functions. Note that only cif-clkoutm1 feature was tested out of the dozens of added pins. Cheers, Quentin To: Linus Walleij To: Heiko Stuebner To: David Wu Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- drivers/pinctrl/pinctrl-rockchip.c | 40 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) --- base-commit: 9abf2313adc1ca1b6180c508c25f22f9395cc780 change-id: 20221017-upstream-px30-cif-clkoutm1-a74d42654367 Best regards, diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c index 53bdfc40f0558..da974ff2d75d0 100644 --- a/drivers/pinctrl/pinctrl-rockchip.c +++ b/drivers/pinctrl/pinctrl-rockchip.c @@ -679,14 +679,54 @@ static void rockchip_get_recalced_mux(struct rockchip_pin_bank *bank, int pin, } static struct rockchip_mux_route_data px30_mux_route_data[] = { + RK_MUXROUTE_SAME(2, RK_PB4, 1, 0x184, BIT(16 + 7)), /* cif-d0m0 */ + RK_MUXROUTE_SAME(3, RK_PA1, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d0m1 */ + RK_MUXROUTE_SAME(2, RK_PB6, 1, 0x184, BIT(16 + 7)), /* cif-d1m0 */ + RK_MUXROUTE_SAME(3, RK_PA2, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d1m1 */ RK_MUXROUTE_SAME(2, RK_PA0, 1, 0x184, BIT(16 + 7)), /* cif-d2m0 */ RK_MUXROUTE_SAME(3, RK_PA3, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d2m1 */ + RK_MUXROUTE_SAME(2, RK_PA1, 1, 0x184, BIT(16 + 7)), /* cif-d3m0 */ + RK_MUXROUTE_SAME(3, RK_PA5, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d3m1 */ + RK_MUXROUTE_SAME(2, RK_PA2, 1, 0x184, BIT(16 + 7)), /* cif-d4m0 */ + RK_MUXROUTE_SAME(3, RK_PA7, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d4m1 */ + RK_MUXROUTE_SAME(2, RK_PA3, 1, 0x184, BIT(16 + 7)), /* cif-d5m0 */ + RK_MUXROUTE_SAME(3, RK_PB0, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d5m1 */ + RK_MUXROUTE_SAME(2, RK_PA4, 1, 0x184, BIT(16 + 7)), /* cif-d6m0 */ + RK_MUXROUTE_SAME(3, RK_PB1, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d6m1 */ + RK_MUXROUTE_SAME(2, RK_PA5, 1, 0x184, BIT(16 + 7)), /* cif-d7m0 */ + RK_MUXROUTE_SAME(3, RK_PB4, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d7m1 */ + RK_MUXROUTE_SAME(2, RK_PA6, 1, 0x184, BIT(16 + 7)), /* cif-d8m0 */ + RK_MUXROUTE_SAME(3, RK_PB6, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d8m1 */ + RK_MUXROUTE_SAME(2, RK_PA7, 1, 0x184, BIT(16 + 7)), /* cif-d9m0 */ + RK_MUXROUTE_SAME(3, RK_PB7, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d9m1 */ + RK_MUXROUTE_SAME(2, RK_PB7, 1, 0x184, BIT(16 + 7)), /* cif-d10m0 */ + RK_MUXROUTE_SAME(3, RK_PC6, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d10m1 */ + RK_MUXROUTE_SAME(2, RK_PC0, 1, 0x184, BIT(16 + 7)), /* cif-d11m0 */ + RK_MUXROUTE_SAME(3, RK_PC7, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-d11m1 */ + RK_MUXROUTE_SAME(2, RK_PB0, 1, 0x184, BIT(16 + 7)), /* cif-vsyncm0 */ + RK_MUXROUTE_SAME(3, RK_PD1, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-vsyncm1 */ + RK_MUXROUTE_SAME(2, RK_PB1, 1, 0x184, BIT(16 + 7)), /* cif-hrefm0 */ + RK_MUXROUTE_SAME(3, RK_PD2, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-hrefm1 */ + RK_MUXROUTE_SAME(2, RK_PB2, 1, 0x184, BIT(16 + 7)), /* cif-clkinm0 */ + RK_MUXROUTE_SAME(3, RK_PD3, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-clkinm1 */ + RK_MUXROUTE_SAME(2, RK_PB3, 1, 0x184, BIT(16 + 7)), /* cif-clkoutm0 */ + RK_MUXROUTE_SAME(3, RK_PD0, 3, 0x184, BIT(16 + 7) | BIT(7)), /* cif-clkoutm1 */ RK_MUXROUTE_SAME(3, RK_PC6, 2, 0x184, BIT(16 + 8)), /* pdm-m0 */ RK_MUXROUTE_SAME(2, RK_PC6, 1, 0x184, BIT(16 + 8) | BIT(8)), /* pdm-m1 */ + RK_MUXROUTE_SAME(3, RK_PD3, 2, 0x184, BIT(16 + 8)), /* pdm-sdi0m0 */ + RK_MUXROUTE_SAME(2, RK_PC5, 2, 0x184, BIT(16 + 8) | BIT(8)), /* pdm-sdi0m1 */ RK_MUXROUTE_SAME(1, RK_PD3, 2, 0x184, BIT(16 + 10)), /* uart2-rxm0 */ RK_MUXROUTE_SAME(2, RK_PB6, 2, 0x184, BIT(16 + 10) | BIT(10)), /* uart2-rxm1 */ + RK_MUXROUTE_SAME(1, RK_PD2, 2, 0x184, BIT(16 + 10)), /* uart2-txm0 */ + RK_MUXROUTE_SAME(2, RK_PB4, 2, 0x184, BIT(16 + 10) | BIT(10)), /* uart2-txm1 */ RK_MUXROUTE_SAME(0, RK_PC1, 2, 0x184, BIT(16 + 9)), /* uart3-rxm0 */ RK_MUXROUTE_SAME(1, RK_PB7, 2, 0x184, BIT(16 + 9) | BIT(9)), /* uart3-rxm1 */ + RK_MUXROUTE_SAME(0, RK_PC0, 2, 0x184, BIT(16 + 9)), /* uart3-txm0 */ + RK_MUXROUTE_SAME(1, RK_PB6, 2, 0x184, BIT(16 + 9) | BIT(9)), /* uart3-txm1 */ + RK_MUXROUTE_SAME(0, RK_PC2, 2, 0x184, BIT(16 + 9)), /* uart3-ctsm0 */ + RK_MUXROUTE_SAME(1, RK_PB4, 2, 0x184, BIT(16 + 9) | BIT(9)), /* uart3-ctsm1 */ + RK_MUXROUTE_SAME(0, RK_PC3, 2, 0x184, BIT(16 + 9)), /* uart3-rtsm0 */ + RK_MUXROUTE_SAME(1, RK_PB5, 2, 0x184, BIT(16 + 9) | BIT(9)), /* uart3-rtsm1 */ }; static struct rockchip_mux_route_data rv1126_mux_route_data[] = {