diff mbox series

[SRU,F,v2,2/3] iopoll: Introduce read_poll_timeout_atomic macro

Message ID 20241114234505.156463-3-yuxuan.luo@canonical.com
State New
Headers show
Series CVE-2024-40967 | expand

Commit Message

Yuxuan Luo Nov. 14, 2024, 11:45 p.m. UTC 
From: Kai-Heng Feng <kai.heng.feng@canonical.com>

Like read_poll_timeout, an atomic variant for multiple parameter read
function can be useful.

Will be used by a later patch.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200424184918.30360-1-kai.heng.feng@canonical.com
(cherry picked from commit 57a29df341466b5cca43ba3d2d7064426727d7c3)
CVE-2024-40967
Signed-off-by: Yuxuan Luo <yuxuan.luo@canonical.com>
---
 include/linux/iopoll.h | 62 +++++++++++++++++++++++++++++-------------
 1 file changed, 43 insertions(+), 19 deletions(-)
diff mbox series

Patch

diff --git a/include/linux/iopoll.h b/include/linux/iopoll.h
index 70f89b389648a..31ff5cb9dd28f 100644
--- a/include/linux/iopoll.h
+++ b/include/linux/iopoll.h
@@ -57,6 +57,48 @@ 
 	(cond) ? 0 : -ETIMEDOUT; \
 })
 
+/**
+ * read_poll_timeout_atomic - Periodically poll an address until a condition is
+ * 				met or a timeout occurs
+ * @op: accessor function (takes @addr as its only argument)
+ * @addr: Address to poll
+ * @val: Variable to read the value into
+ * @cond: Break condition (usually involving @val)
+ * @delay_us: Time to udelay between reads in us (0 tight-loops).  Should
+ *            be less than ~10us since udelay is used (see
+ *            Documentation/timers/timers-howto.rst).
+ * @timeout_us: Timeout in us, 0 means never timeout
+ * @delay_before_read: if it is true, delay @delay_us before read.
+ *
+ * Returns 0 on success and -ETIMEDOUT upon a timeout. In either
+ * case, the last read value at @args is stored in @val.
+ *
+ * When available, you'll probably want to use one of the specialized
+ * macros defined below rather than this macro directly.
+ */
+#define read_poll_timeout_atomic(op, val, cond, delay_us, timeout_us, \
+					delay_before_read, args...) \
+({ \
+	u64 __timeout_us = (timeout_us); \
+	unsigned long __delay_us = (delay_us); \
+	ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \
+	if (delay_before_read && __delay_us) \
+		udelay(__delay_us); \
+	for (;;) { \
+		(val) = op(args); \
+		if (cond) \
+			break; \
+		if (__timeout_us && \
+		    ktime_compare(ktime_get(), __timeout) > 0) { \
+			(val) = op(args); \
+			break; \
+		} \
+		if (__delay_us) \
+			udelay(__delay_us); \
+	} \
+	(cond) ? 0 : -ETIMEDOUT; \
+})
+
 /**
  * readx_poll_timeout - Periodically poll an address until a condition is met or a timeout occurs
  * @op: accessor function (takes @addr as its only argument)
@@ -114,25 +156,7 @@ 
  * macros defined below rather than this macro directly.
  */
 #define readx_poll_timeout_atomic(op, addr, val, cond, delay_us, timeout_us) \
-({ \
-	u64 __timeout_us = (timeout_us); \
-	unsigned long __delay_us = (delay_us); \
-	ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \
-	for (;;) { \
-		(val) = op(addr); \
-		if (cond) \
-			break; \
-		if (__timeout_us && \
-		    ktime_compare(ktime_get(), __timeout) > 0) { \
-			(val) = op(addr); \
-			break; \
-		} \
-		if (__delay_us) \
-			udelay(__delay_us);	\
-	} \
-	(cond) ? 0 : -ETIMEDOUT; \
-})
-
+	read_poll_timeout_atomic(op, val, cond, delay_us, timeout_us, false, addr)
 
 #define readb_poll_timeout(addr, val, cond, delay_us, timeout_us) \
 	readx_poll_timeout(readb, addr, val, cond, delay_us, timeout_us)