diff mbox series

[v4,6/7] configs: j722s_evm_a53_defconfig: enable USB DFU support

Message ID 20250210112239.2639009-7-s-vadapalli@ti.com
State Accepted
Commit 646f23e5a648da00b99ddb24df00aec0727d063e
Delegated to: Tom Rini
Headers show
Series AM62,AM62-LP,AM62A,AM62P,J722S: USB DFU and UMS | expand

Commit Message

Siddharth Vadapalli Feb. 10, 2025, 11:22 a.m. UTC 
The USB0 instance of USB on J722S SoC is a Designware USB Controller with
the same glue layer (wrapper) as AM62 SoC. In order to support USB DFU boot
and USB DFU flash with USB0, enable the corresponding glue layer driver.

While at it, sync with savedefconfig.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---

This patch has been newly introduced in this series.

Regards,
Siddharth.

 configs/j722s_evm_a53_defconfig | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/configs/j722s_evm_a53_defconfig b/configs/j722s_evm_a53_defconfig
index 81eb934ed6..b53dc3054f 100644
--- a/configs/j722s_evm_a53_defconfig
+++ b/configs/j722s_evm_a53_defconfig
@@ -1,6 +1,7 @@ 
 CONFIG_ARM=y
 CONFIG_ARCH_K3=y
 CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_TI_COMMON_CMD_OPTIONS=y
 CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
@@ -54,7 +55,6 @@  CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
 CONFIG_SPL_THERMAL=y
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
 CONFIG_CMD_MTD=y
 CONFIG_CMD_REMOTEPROC=y
 CONFIG_CMD_USB_MASS_STORAGE=y
@@ -155,6 +155,8 @@  CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_DWC3_GENERIC=y
 CONFIG_SPL_USB_DWC3_GENERIC=y
+CONFIG_SPL_USB_DWC3_AM62=y
+CONFIG_USB_DWC3_AM62=y
 CONFIG_SPL_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_SPL_USB_GADGET=y
@@ -163,4 +165,3 @@  CONFIG_USB_GADGET_VENDOR_NUM=0x0451
 CONFIG_USB_GADGET_PRODUCT_NUM=0x6165
 CONFIG_SPL_DFU=y
 CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
-CONFIG_TI_COMMON_CMD_OPTIONS=y