diff mbox series

[v11,7/7] arm64: zynqmp: Update the usb5744 hub node as per binding

Message ID 20241112050740.15343-8-venkatesh.abbarapu@amd.com
State Superseded
Delegated to: Marek Vasut
Headers show
Series Add the USB5744 hub driver as per new DT binding | expand

Commit Message

Abbarapu, Venkatesh Nov. 12, 2024, 5:07 a.m. UTC
Updating the usb5744 hub node as per the latest upstream DT binding
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
tree/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml?h=v6.8.8

Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
---
 arch/arm/dts/zynqmp-sck-kr-g-revA.dtso | 48 ++++++++++++++++++++++++++
 arch/arm/dts/zynqmp-sck-kr-g-revB.dtso | 48 ++++++++++++++++++++++++++
 arch/arm/dts/zynqmp-sck-kv-g-revA.dtso | 18 ++++++++++
 arch/arm/dts/zynqmp-sck-kv-g-revB.dtso | 25 +++++++++++++-
 4 files changed, 138 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso
index 6349a0e108..e40840acb8 100644
--- a/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso
+++ b/arch/arm/dts/zynqmp-sck-kr-g-revA.dtso
@@ -105,11 +105,19 @@ 
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+			hub_1: usb-hub@2d {
+				compatible = "microchip,usb5744";
+				reg = <0x2d>;
+			};
 		};
 		usbhub_i2c1: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
+			hub_2: usb-hub@2d {
+				compatible = "microchip,usb5744";
+				reg = <0x2d>;
+			};
 		};
 		/* Bus 2/3 are not connected */
 	};
@@ -164,6 +172,26 @@ 
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		i2c-bus = <&hub_1>;
+		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		i2c-bus = <&hub_1>;
+		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &usb1 { /* mio64 - mio75 */
@@ -188,6 +216,26 @@ 
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub1_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub1_3_0>;
+		i2c-bus = <&hub_2>;
+		reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub1_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub1_2_0>;
+		i2c-bus = <&hub_2>;
+		reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &gem0 { /* mdio mio50/51 */
diff --git a/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso b/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
index b0d737d3ca..ce1ad2b765 100644
--- a/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
+++ b/arch/arm/dts/zynqmp-sck-kr-g-revB.dtso
@@ -117,11 +117,19 @@ 
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+			hub_1: usb-hub@2d {
+				compatible = "microchip,usb5744";
+				reg = <0x2d>;
+			};
 		};
 		usbhub_i2c1: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
+			hub_2: usb-hub@2d {
+				compatible = "microchip,usb5744";
+				reg = <0x2d>;
+			};
 		};
 		/* Bus 2/3 are not connected */
 	};
@@ -184,6 +192,26 @@ 
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		i2c-bus = <&hub_1>;
+		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		i2c-bus = <&hub_1>;
+		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &usb1 { /* mio64 - mio75 */
@@ -209,6 +237,26 @@ 
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub1_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub1_3_0>;
+		i2c-bus = <&hub_2>;
+		reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub1_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub1_2_0>;
+		i2c-bus = <&hub_2>;
+		reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &gem0 { /* mdio mio50/51 */
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso
index 561b546e37..0ef0357bd2 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso
@@ -142,6 +142,24 @@ 
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &sdhci1 { /* on CC with tuned parameters */
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso b/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
index 64683e0ccb..92d8851eb8 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
@@ -92,7 +92,10 @@ 
 		label = "ina260-u14";
 		reg = <0x40>;
 	};
-	/* u43 - 0x2d - USB hub */
+	hub: usb-hub@2d {
+		compatible = "microchip,usb5744";
+		reg = <0x2d>;
+	};
 	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
 };
 
@@ -146,6 +149,26 @@ 
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		i2c-bus = <&hub>;
+		reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		i2c-bus = <&hub>;
+		reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &sdhci1 { /* on CC with tuned parameters */