| Message ID | 20241111020808.38974-3-hal.feng@starfivetech.com |
|---|---|
| State | Changes Requested |
| Delegated to: | Andes |
| Headers | show |
| Series | Support OF_UPSTREAM for StarFive JH7110 | expand |
On 11/11/24 03:07, Hal Feng wrote: > JH7110 boards switch to using upstream DT, so drop > redundant DT files from arch/riscv/dts/. > > Signed-off-by: Hal Feng <hal.feng@starfivetech.com> I added paches 1/13 and 2/13 to origin/master. make starfive_visionfive2_defconfig make yielded the following error: DTC dts/upstream/src/riscv/starfive/jh7110-starfive-visionfive-2-v1.3b.dtb Error: dts/upstream/src/riscv/starfive/jh7110.dtsi:518.15-16 syntax error FATAL ERROR: Unable to parse input tree Check /home/zfsdt/workspace/u-boot-build/denx/dts/upstream/src/riscv/starfive/.jh7110-starfive-visionfive-2-v1.3b.dtb.pre.tmp for errors make[2]: *** [scripts/Makefile.lib:423: dts/upstream/src/riscv/starfive/jh7110-starfive-visionfive-2-v1.3b.dtb] Error 1 make[1]: *** [dts/Makefile:60: arch-dtbs] Error 2 make: *** [Makefile:1175: dts/dt.dtb] Error 2 make: *** Waiting for unfinished jobs.... include/dt-bindings/clock/starfive,jh7110-crg.h which does *not* include the symbol JH7110_SYSCLK_TDM_TDM is evaluated instead of dts/upstream/include/dt-bindings/clock/starfive,jh7110-crg.h which contains the symbol JH7110_SYSCLK_TDM_TDM. We want git bisect to work. Hence we must ensure that after each individual patch building works. Before merging the series we need a patch ensuring that upstream includes are used. Best regards Heinrich > --- > arch/riscv/dts/Makefile | 1 - > .../dts/jh7110-starfive-visionfive-2.dts | 11 - > .../dts/jh7110-starfive-visionfive-2.dtsi | 380 --------- > arch/riscv/dts/jh7110.dtsi | 761 ------------------ > 4 files changed, 1153 deletions(-) > delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2.dts > delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi > delete mode 100644 arch/riscv/dts/jh7110.dtsi > > diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile > index de356584bf..07ebe530bd 100644 > --- a/arch/riscv/dts/Makefile > +++ b/arch/riscv/dts/Makefile > @@ -7,7 +7,6 @@ dtb-$(CONFIG_TARGET_OPENPITON_RISCV64) += openpiton-riscv64.dtb > dtb-$(CONFIG_TARGET_SIFIVE_UNLEASHED) += hifive-unleashed-a00.dtb > dtb-$(CONFIG_TARGET_SIFIVE_UNMATCHED) += hifive-unmatched-a00.dtb > dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb > -dtb-$(CONFIG_TARGET_STARFIVE_VISIONFIVE2) += jh7110-starfive-visionfive-2.dtb > dtb-$(CONFIG_TARGET_TH1520_LPI4A) += th1520-lichee-pi-4a.dtb > dtb-$(CONFIG_TARGET_XILINX_MBV) += xilinx-mbv32.dtb > dtb-$(CONFIG_TARGET_XILINX_MBV) += xilinx-mbv64.dtb > diff --git a/arch/riscv/dts/jh7110-starfive-visionfive-2.dts b/arch/riscv/dts/jh7110-starfive-visionfive-2.dts > deleted file mode 100644 > index 288ea39493..0000000000 > --- a/arch/riscv/dts/jh7110-starfive-visionfive-2.dts > +++ /dev/null > @@ -1,11 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0 OR MIT > -/* > - * Copyright (C) 2023 StarFive Technology Co., Ltd. > - */ > - > -/dts-v1/; > -#include "jh7110-starfive-visionfive-2.dtsi" > - > -/ { > - compatible = "starfive,visionfive-2-v1.3b", "starfive,jh7110"; > -}; > diff --git a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi > deleted file mode 100644 > index e11babc1cd..0000000000 > --- a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi > +++ /dev/null > @@ -1,380 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0 OR MIT > -/* > - * Copyright (C) 2022 StarFive Technology Co., Ltd. > - */ > - > -/dts-v1/; > - > -#include "jh7110.dtsi" > -#include <dt-bindings/pinctrl/pinctrl-starfive-jh7110.h> > -#include <dt-bindings/gpio/gpio.h> > -/ { > - aliases { > - serial0 = &uart0; > - spi0 = &qspi; > - mmc0 = &mmc0; > - mmc1 = &mmc1; > - i2c0 = &i2c0; > - i2c2 = &i2c2; > - i2c5 = &i2c5; > - i2c6 = &i2c6; > - ethernet0 = &gmac0; > - ethernet1 = &gmac1; > - }; > - > - chosen { > - stdout-path = "serial0:115200n8"; > - }; > - > - cpus { > - timebase-frequency = <4000000>; > - }; > - > - memory@40000000 { > - device_type = "memory"; > - reg = <0x0 0x40000000 0x2 0x0>; > - }; > - > - gpio-restart { > - compatible = "gpio-restart"; > - gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>; > - }; > -}; > - > -&osc { > - clock-frequency = <24000000>; > -}; > - > -&rtc_osc { > - clock-frequency = <32768>; > -}; > - > -&gmac0_rmii_refin { > - clock-frequency = <50000000>; > -}; > - > -&gmac0_rgmii_rxin { > - clock-frequency = <125000000>; > -}; > - > -&gmac1_rmii_refin { > - clock-frequency = <50000000>; > -}; > - > -&gmac1_rgmii_rxin { > - clock-frequency = <125000000>; > -}; > - > -&i2stx_bclk_ext { > - clock-frequency = <12288000>; > -}; > - > -&i2stx_lrck_ext { > - clock-frequency = <192000>; > -}; > - > -&i2srx_bclk_ext { > - clock-frequency = <12288000>; > -}; > - > -&i2srx_lrck_ext { > - clock-frequency = <192000>; > -}; > - > -&tdm_ext { > - clock-frequency = <49152000>; > -}; > - > -&mclk_ext { > - clock-frequency = <12288000>; > -}; > - > -&uart0 { > - reg-offset = <0>; > - current-speed = <115200>; > - clock-frequency = <24000000>; > - pinctrl-names = "default"; > - pinctrl-0 = <&uart0_pins>; > - status = "okay"; > -}; > - > -&i2c0 { > - clock-frequency = <100000>; > - i2c-sda-hold-time-ns = <300>; > - i2c-sda-falling-time-ns = <510>; > - i2c-scl-falling-time-ns = <510>; > - pinctrl-names = "default"; > - pinctrl-0 = <&i2c0_pins>; > - status = "okay"; > -}; > - > -&i2c2 { > - clock-frequency = <100000>; > - i2c-sda-hold-time-ns = <300>; > - i2c-sda-falling-time-ns = <510>; > - i2c-scl-falling-time-ns = <510>; > - pinctrl-names = "default"; > - pinctrl-0 = <&i2c2_pins>; > - status = "okay"; > -}; > - > -&i2c5 { > - clock-frequency = <100000>; > - i2c-sda-hold-time-ns = <300>; > - i2c-sda-falling-time-ns = <510>; > - i2c-scl-falling-time-ns = <510>; > - pinctrl-names = "default"; > - pinctrl-0 = <&i2c5_pins>; > - status = "okay"; > - > - pmic@36 { > - compatible = "x-powers,axp15060"; > - reg = <0x36>; > - }; > - > - eeprom@50 { > - compatible = "atmel,24c04"; > - reg = <0x50>; > - pagesize = <16>; > - }; > -}; > - > -&i2c6 { > - clock-frequency = <100000>; > - i2c-sda-hold-time-ns = <300>; > - i2c-sda-falling-time-ns = <510>; > - i2c-scl-falling-time-ns = <510>; > - pinctrl-names = "default"; > - pinctrl-0 = <&i2c6_pins>; > - status = "okay"; > -}; > - > -&sysgpio { > - status = "okay"; > - uart0_pins: uart0-0 { > - tx-pins { > - pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX, > - GPOEN_ENABLE, > - GPI_NONE)>; > - bias-disable; > - drive-strength = <12>; > - input-disable; > - input-schmitt-disable; > - slew-rate = <0>; > - }; > - > - rx-pins { > - pinmux = <GPIOMUX(6, GPOUT_LOW, > - GPOEN_DISABLE, > - GPI_SYS_UART0_RX)>; > - bias-disable; /* external pull-up */ > - drive-strength = <2>; > - input-enable; > - input-schmitt-enable; > - slew-rate = <0>; > - }; > - }; > - > - i2c0_pins: i2c0-0 { > - i2c-pins { > - pinmux = <GPIOMUX(57, GPOUT_LOW, > - GPOEN_SYS_I2C0_CLK, > - GPI_SYS_I2C0_CLK)>, > - <GPIOMUX(58, GPOUT_LOW, > - GPOEN_SYS_I2C0_DATA, > - GPI_SYS_I2C0_DATA)>; > - bias-disable; /* external pull-up */ > - input-enable; > - input-schmitt-enable; > - }; > - }; > - > - i2c2_pins: i2c2-0 { > - i2c-pins { > - pinmux = <GPIOMUX(3, GPOUT_LOW, > - GPOEN_SYS_I2C2_CLK, > - GPI_SYS_I2C2_CLK)>, > - <GPIOMUX(2, GPOUT_LOW, > - GPOEN_SYS_I2C2_DATA, > - GPI_SYS_I2C2_DATA)>; > - bias-disable; /* external pull-up */ > - input-enable; > - input-schmitt-enable; > - }; > - }; > - > - i2c5_pins: i2c5-0 { > - i2c-pins { > - pinmux = <GPIOMUX(19, GPOUT_LOW, > - GPOEN_SYS_I2C5_CLK, > - GPI_SYS_I2C5_CLK)>, > - <GPIOMUX(20, GPOUT_LOW, > - GPOEN_SYS_I2C5_DATA, > - GPI_SYS_I2C5_DATA)>; > - bias-disable; /* external pull-up */ > - input-enable; > - input-schmitt-enable; > - }; > - }; > - > - i2c6_pins: i2c6-0 { > - i2c-pins { > - pinmux = <GPIOMUX(16, GPOUT_LOW, > - GPOEN_SYS_I2C6_CLK, > - GPI_SYS_I2C6_CLK)>, > - <GPIOMUX(17, GPOUT_LOW, > - GPOEN_SYS_I2C6_DATA, > - GPI_SYS_I2C6_DATA)>; > - bias-disable; /* external pull-up */ > - input-enable; > - input-schmitt-enable; > - }; > - }; > - > - mmc0_pins: mmc0-pins { > - mmc0-pins-rest { > - pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST, > - GPOEN_ENABLE, GPI_NONE)>; > - bias-pull-up; > - drive-strength = <12>; > - input-disable; > - input-schmitt-disable; > - slew-rate = <0>; > - }; > - }; > - > - mmc1_pins: mmc1-pins { > - mmc1-pins0 { > - pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK, > - GPOEN_ENABLE, GPI_NONE)>; > - bias-pull-up; > - drive-strength = <12>; > - input-disable; > - input-schmitt-disable; > - slew-rate = <0>; > - }; > - > - mmc1-pins1 { > - pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD, > - GPOEN_SYS_SDIO1_CMD, GPI_SYS_SDIO1_CMD)>, > - <GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0, > - GPOEN_SYS_SDIO1_DATA0, GPI_SYS_SDIO1_DATA0)>, > - <GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1, > - GPOEN_SYS_SDIO1_DATA1, GPI_SYS_SDIO1_DATA1)>, > - <GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2, > - GPOEN_SYS_SDIO1_DATA2, GPI_SYS_SDIO1_DATA2)>, > - <GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3, > - GPOEN_SYS_SDIO1_DATA3, GPI_SYS_SDIO1_DATA3)>; > - bias-pull-up; > - drive-strength = <12>; > - input-enable; > - input-schmitt-enable; > - slew-rate = <0>; > - }; > - }; > -}; > - > -&mmc0 { > - compatible = "snps,dw-mshc"; > - max-frequency = <100000000>; > - bus-width = <8>; > - pinctrl-names = "default"; > - pinctrl-0 = <&mmc0_pins>; > - cap-mmc-highspeed; > - mmc-ddr-1_8v; > - mmc-hs200-1_8v; > - non-removable; > - cap-mmc-hw-reset; > - post-power-on-delay-ms = <200>; > - status = "okay"; > - > -}; > - > -&mmc1 { > - compatible = "snps,dw-mshc"; > - max-frequency = <100000000>; > - bus-width = <4>; > - pinctrl-names = "default"; > - pinctrl-0 = <&mmc1_pins>; > - no-sdio; > - no-mmc; > - cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>; > - cap-sd-highspeed; > - post-power-on-delay-ms = <200>; > - status = "okay"; > -}; > - > -&qspi { > - spi-max-frequency = <250000000>; > - status = "okay"; > - > - nor-flash@0 { > - compatible = "jedec,spi-nor"; > - reg=<0>; > - spi-max-frequency = <100000000>; > - cdns,tshsl-ns = <1>; > - cdns,tsd2d-ns = <1>; > - cdns,tchsh-ns = <1>; > - cdns,tslch-ns = <1>; > - }; > -}; > - > -&pcie0 { > - reset-gpios = <&sysgpio 26 GPIO_ACTIVE_LOW>; > - status = "okay"; > -}; > - > -&pcie1 { > - reset-gpios = <&sysgpio 28 GPIO_ACTIVE_LOW>; > - status = "okay"; > -}; > - > -&syscrg { > - assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_ROOT>, > - <&syscrg JH7110_SYSCLK_BUS_ROOT>, > - <&syscrg JH7110_SYSCLK_PERH_ROOT>, > - <&syscrg JH7110_SYSCLK_QSPI_REF>; > - assigned-clock-parents = <&pllclk JH7110_SYSCLK_PLL0_OUT>, > - <&pllclk JH7110_SYSCLK_PLL2_OUT>, > - <&pllclk JH7110_SYSCLK_PLL2_OUT>, > - <&syscrg JH7110_SYSCLK_QSPI_REF_SRC>; > - assigned-clock-rates = <0>, <0>, <0>, <0>; > -}; > - > -&aoncrg { > - assigned-clocks = <&aoncrg JH7110_AONCLK_APB_FUNC>; > - assigned-clock-parents = <&osc>; > - assigned-clock-rates = <0>; > -}; > - > -&gmac0 { > - phy-handle = <&phy0>; > - phy-mode = "rgmii-id"; > - status = "okay"; > - > - mdio { > - #address-cells = <1>; > - #size-cells = <0>; > - compatible = "snps,dwmac-mdio"; > - > - phy0: ethernet-phy@0 { > - reg = <0>; > - }; > - }; > -}; > - > -&gmac1 { > - phy-handle = <&phy1>; > - phy-mode = "rgmii-id"; > - status = "okay"; > - > - mdio { > - #address-cells = <1>; > - #size-cells = <0>; > - compatible = "snps,dwmac-mdio"; > - > - phy1: ethernet-phy@1 { > - reg = <0>; > - }; > - }; > -}; > diff --git a/arch/riscv/dts/jh7110.dtsi b/arch/riscv/dts/jh7110.dtsi > deleted file mode 100644 > index 2cdc683d49..0000000000 > --- a/arch/riscv/dts/jh7110.dtsi > +++ /dev/null > @@ -1,761 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0 OR MIT > -/* > - * Copyright (C) 2022 StarFive Technology Co., Ltd. > - */ > - > -/dts-v1/; > -#include <dt-bindings/clock/starfive,jh7110-crg.h> > -#include <dt-bindings/reset/starfive,jh7110-crg.h> > - > -/ { > - compatible = "starfive,jh7110"; > - #address-cells = <2>; > - #size-cells = <2>; > - > - cpus { > - #address-cells = <1>; > - #size-cells = <0>; > - > - S7_0: cpu@0 { > - compatible = "sifive,s7", "riscv"; > - reg = <0>; > - device_type = "cpu"; > - i-cache-block-size = <64>; > - i-cache-sets = <64>; > - i-cache-size = <16384>; > - next-level-cache = <&ccache>; > - riscv,isa = "rv64imac_zba_zbb"; > - status = "disabled"; > - > - cpu0_intc: interrupt-controller { > - compatible = "riscv,cpu-intc"; > - interrupt-controller; > - #interrupt-cells = <1>; > - }; > - }; > - > - U74_1: cpu@1 { > - compatible = "sifive,u74-mc", "riscv"; > - reg = <1>; > - d-cache-block-size = <64>; > - d-cache-sets = <64>; > - d-cache-size = <32768>; > - d-tlb-sets = <1>; > - d-tlb-size = <40>; > - device_type = "cpu"; > - i-cache-block-size = <64>; > - i-cache-sets = <64>; > - i-cache-size = <32768>; > - i-tlb-sets = <1>; > - i-tlb-size = <40>; > - mmu-type = "riscv,sv39"; > - next-level-cache = <&ccache>; > - riscv,isa = "rv64imafdc_zba_zbb"; > - tlb-split; > - > - cpu1_intc: interrupt-controller { > - compatible = "riscv,cpu-intc"; > - interrupt-controller; > - #interrupt-cells = <1>; > - }; > - }; > - > - U74_2: cpu@2 { > - compatible = "sifive,u74-mc", "riscv"; > - reg = <2>; > - d-cache-block-size = <64>; > - d-cache-sets = <64>; > - d-cache-size = <32768>; > - d-tlb-sets = <1>; > - d-tlb-size = <40>; > - device_type = "cpu"; > - i-cache-block-size = <64>; > - i-cache-sets = <64>; > - i-cache-size = <32768>; > - i-tlb-sets = <1>; > - i-tlb-size = <40>; > - mmu-type = "riscv,sv39"; > - next-level-cache = <&ccache>; > - riscv,isa = "rv64imafdc_zba_zbb"; > - tlb-split; > - > - cpu2_intc: interrupt-controller { > - compatible = "riscv,cpu-intc"; > - interrupt-controller; > - #interrupt-cells = <1>; > - }; > - }; > - > - U74_3: cpu@3 { > - compatible = "sifive,u74-mc", "riscv"; > - reg = <3>; > - d-cache-block-size = <64>; > - d-cache-sets = <64>; > - d-cache-size = <32768>; > - d-tlb-sets = <1>; > - d-tlb-size = <40>; > - device_type = "cpu"; > - i-cache-block-size = <64>; > - i-cache-sets = <64>; > - i-cache-size = <32768>; > - i-tlb-sets = <1>; > - i-tlb-size = <40>; > - mmu-type = "riscv,sv39"; > - next-level-cache = <&ccache>; > - riscv,isa = "rv64imafdc_zba_zbb"; > - tlb-split; > - > - cpu3_intc: interrupt-controller { > - compatible = "riscv,cpu-intc"; > - interrupt-controller; > - #interrupt-cells = <1>; > - }; > - }; > - > - U74_4: cpu@4 { > - compatible = "sifive,u74-mc", "riscv"; > - reg = <4>; > - d-cache-block-size = <64>; > - d-cache-sets = <64>; > - d-cache-size = <32768>; > - d-tlb-sets = <1>; > - d-tlb-size = <40>; > - device_type = "cpu"; > - i-cache-block-size = <64>; > - i-cache-sets = <64>; > - i-cache-size = <32768>; > - i-tlb-sets = <1>; > - i-tlb-size = <40>; > - mmu-type = "riscv,sv39"; > - next-level-cache = <&ccache>; > - riscv,isa = "rv64imafdc_zba_zbb"; > - tlb-split; > - > - cpu4_intc: interrupt-controller { > - compatible = "riscv,cpu-intc"; > - interrupt-controller; > - #interrupt-cells = <1>; > - }; > - }; > - > - cpu-map { > - cluster0 { > - core0 { > - cpu = <&S7_0>; > - }; > - > - core1 { > - cpu = <&U74_1>; > - }; > - > - core2 { > - cpu = <&U74_2>; > - }; > - > - core3 { > - cpu = <&U74_3>; > - }; > - > - core4 { > - cpu = <&U74_4>; > - }; > - }; > - }; > - }; > - > - timer { > - compatible = "riscv,timer"; > - interrupts-extended = <&cpu0_intc 5>, > - <&cpu1_intc 5>, > - <&cpu2_intc 5>, > - <&cpu3_intc 5>, > - <&cpu4_intc 5>; > - }; > - > - osc: oscillator { > - compatible = "fixed-clock"; > - clock-output-names = "osc"; > - #clock-cells = <0>; > - }; > - > - rtc_osc: rtc-oscillator { > - compatible = "fixed-clock"; > - clock-output-names = "rtc_osc"; > - #clock-cells = <0>; > - }; > - > - gmac0_rmii_refin: gmac0-rmii-refin-clock { > - compatible = "fixed-clock"; > - clock-output-names = "gmac0_rmii_refin"; > - #clock-cells = <0>; > - }; > - > - gmac0_rgmii_rxin: gmac0-rgmii-rxin-clock { > - compatible = "fixed-clock"; > - clock-output-names = "gmac0_rgmii_rxin"; > - #clock-cells = <0>; > - }; > - > - gmac1_rmii_refin: gmac1-rmii-refin-clock { > - compatible = "fixed-clock"; > - clock-output-names = "gmac1_rmii_refin"; > - #clock-cells = <0>; > - }; > - > - gmac1_rgmii_rxin: gmac1-rgmii-rxin-clock { > - compatible = "fixed-clock"; > - clock-output-names = "gmac1_rgmii_rxin"; > - #clock-cells = <0>; > - }; > - > - i2stx_bclk_ext: i2stx-bclk-ext-clock { > - compatible = "fixed-clock"; > - clock-output-names = "i2stx_bclk_ext"; > - #clock-cells = <0>; > - }; > - > - i2stx_lrck_ext: i2stx-lrck-ext-clock { > - compatible = "fixed-clock"; > - clock-output-names = "i2stx_lrck_ext"; > - #clock-cells = <0>; > - }; > - > - i2srx_bclk_ext: i2srx-bclk-ext-clock { > - compatible = "fixed-clock"; > - clock-output-names = "i2srx_bclk_ext"; > - #clock-cells = <0>; > - }; > - > - i2srx_lrck_ext: i2srx-lrck-ext-clock { > - compatible = "fixed-clock"; > - clock-output-names = "i2srx_lrck_ext"; > - #clock-cells = <0>; > - }; > - > - tdm_ext: tdm-ext-clock { > - compatible = "fixed-clock"; > - clock-output-names = "tdm_ext"; > - #clock-cells = <0>; > - }; > - > - mclk_ext: mclk-ext-clock { > - compatible = "fixed-clock"; > - clock-output-names = "mclk_ext"; > - #clock-cells = <0>; > - }; > - > - stmmac_axi_setup: stmmac-axi-config { > - snps,lpi_en; > - snps,wr_osr_lmt = <4>; > - snps,rd_osr_lmt = <4>; > - snps,blen = <256 128 64 32 0 0 0>; > - }; > - > - soc { > - compatible = "simple-bus"; > - interrupt-parent = <&plic>; > - #address-cells = <2>; > - #size-cells = <2>; > - ranges; > - > - clint: timer@2000000 { > - compatible = "starfive,jh7110-clint", "sifive,clint0"; > - reg = <0x0 0x2000000 0x0 0x10000>; > - interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, > - <&cpu1_intc 3>, <&cpu1_intc 7>, > - <&cpu2_intc 3>, <&cpu2_intc 7>, > - <&cpu3_intc 3>, <&cpu3_intc 7>, > - <&cpu4_intc 3>, <&cpu4_intc 7>; > - }; > - > - plic: interrupt-controller@c000000 { > - compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0"; > - reg = <0x0 0xc000000 0x0 0x4000000>; > - interrupts-extended = <&cpu0_intc 11>, > - <&cpu1_intc 11>, <&cpu1_intc 9>, > - <&cpu2_intc 11>, <&cpu2_intc 9>, > - <&cpu3_intc 11>, <&cpu3_intc 9>, > - <&cpu4_intc 11>, <&cpu4_intc 9>; > - interrupt-controller; > - #interrupt-cells = <1>; > - #address-cells = <0>; > - riscv,ndev = <136>; > - }; > - > - ccache: cache-controller@2010000 { > - compatible = "starfive,jh7110-ccache", "sifive,ccache0", "cache"; > - reg = <0x0 0x2010000 0x0 0x4000>; > - interrupts = <1>, <3>, <4>, <2>; > - cache-block-size = <64>; > - cache-level = <2>; > - cache-sets = <2048>; > - cache-size = <2097152>; > - cache-unified; > - }; > - > - uart0: serial@10000000 { > - compatible = "snps,dw-apb-uart"; > - reg = <0x0 0x10000000 0x0 0x10000>; > - clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>, > - <&syscrg JH7110_SYSCLK_UART0_APB>; > - clock-names = "baudclk", "apb_pclk"; > - resets = <&syscrg JH7110_SYSRST_UART0_APB>, > - <&syscrg JH7110_SYSRST_UART0_CORE>; > - interrupts = <32>; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - uart1: serial@10010000 { > - compatible = "snps,dw-apb-uart"; > - reg = <0x0 0x10010000 0x0 0x10000>; > - clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>, > - <&syscrg JH7110_SYSCLK_UART1_APB>; > - clock-names = "baudclk", "apb_pclk"; > - resets = <&syscrg JH7110_SYSRST_UART1_APB>, > - <&syscrg JH7110_SYSRST_UART1_CORE>; > - interrupts = <33>; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - uart2: serial@10020000 { > - compatible = "snps,dw-apb-uart"; > - reg = <0x0 0x10020000 0x0 0x10000>; > - clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>, > - <&syscrg JH7110_SYSCLK_UART2_APB>; > - clock-names = "baudclk", "apb_pclk"; > - resets = <&syscrg JH7110_SYSRST_UART2_APB>, > - <&syscrg JH7110_SYSRST_UART2_CORE>; > - interrupts = <34>; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - i2c0: i2c@10030000 { > - compatible = "snps,designware-i2c"; > - reg = <0x0 0x10030000 0x0 0x10000>; > - clocks = <&syscrg JH7110_SYSCLK_I2C0_APB>; > - clock-names = "ref"; > - resets = <&syscrg JH7110_SYSRST_I2C0_APB>; > - interrupts = <35>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - i2c1: i2c@10040000 { > - compatible = "snps,designware-i2c"; > - reg = <0x0 0x10040000 0x0 0x10000>; > - clocks = <&syscrg JH7110_SYSCLK_I2C1_APB>; > - clock-names = "ref"; > - resets = <&syscrg JH7110_SYSRST_I2C1_APB>; > - interrupts = <36>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - i2c2: i2c@10050000 { > - compatible = "snps,designware-i2c"; > - reg = <0x0 0x10050000 0x0 0x10000>; > - clocks = <&syscrg JH7110_SYSCLK_I2C2_APB>; > - clock-names = "ref"; > - resets = <&syscrg JH7110_SYSRST_I2C2_APB>; > - interrupts = <37>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - stgcrg: clock-controller@10230000 { > - compatible = "starfive,jh7110-stgcrg"; > - reg = <0x0 0x10230000 0x0 0x10000>; > - #clock-cells = <1>; > - #reset-cells = <1>; > - }; > - > - stg_syscon: stg_syscon@10240000 { > - compatible = "starfive,jh7110-stg-syscon","syscon"; > - reg = <0x0 0x10240000 0x0 0x1000>; > - }; > - > - uart3: serial@12000000 { > - compatible = "snps,dw-apb-uart"; > - reg = <0x0 0x12000000 0x0 0x10000>; > - clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>, > - <&syscrg JH7110_SYSCLK_UART3_APB>; > - clock-names = "baudclk", "apb_pclk"; > - resets = <&syscrg JH7110_SYSRST_UART3_APB>, > - <&syscrg JH7110_SYSRST_UART3_CORE>; > - interrupts = <45>; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - uart4: serial@12010000 { > - compatible = "snps,dw-apb-uart"; > - reg = <0x0 0x12010000 0x0 0x10000>; > - clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>, > - <&syscrg JH7110_SYSCLK_UART4_APB>; > - clock-names = "baudclk", "apb_pclk"; > - resets = <&syscrg JH7110_SYSRST_UART4_APB>, > - <&syscrg JH7110_SYSRST_UART4_CORE>; > - interrupts = <46>; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - uart5: serial@12020000 { > - compatible = "snps,dw-apb-uart"; > - reg = <0x0 0x12020000 0x0 0x10000>; > - clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>, > - <&syscrg JH7110_SYSCLK_UART5_APB>; > - clock-names = "baudclk", "apb_pclk"; > - resets = <&syscrg JH7110_SYSRST_UART5_APB>, > - <&syscrg JH7110_SYSRST_UART5_CORE>; > - interrupts = <47>; > - reg-io-width = <4>; > - reg-shift = <2>; > - status = "disabled"; > - }; > - > - i2c3: i2c@12030000 { > - compatible = "snps,designware-i2c"; > - reg = <0x0 0x12030000 0x0 0x10000>; > - clocks = <&syscrg JH7110_SYSCLK_I2C3_APB>; > - clock-names = "ref"; > - resets = <&syscrg JH7110_SYSRST_I2C3_APB>; > - interrupts = <48>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - i2c4: i2c@12040000 { > - compatible = "snps,designware-i2c"; > - reg = <0x0 0x12040000 0x0 0x10000>; > - clocks = <&syscrg JH7110_SYSCLK_I2C4_APB>; > - clock-names = "ref"; > - resets = <&syscrg JH7110_SYSRST_I2C4_APB>; > - interrupts = <49>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - i2c5: i2c@12050000 { > - compatible = "snps,designware-i2c"; > - reg = <0x0 0x12050000 0x0 0x10000>; > - clocks = <&syscrg JH7110_SYSCLK_I2C5_APB>; > - clock-names = "ref"; > - resets = <&syscrg JH7110_SYSRST_I2C5_APB>; > - interrupts = <50>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - i2c6: i2c@12060000 { > - compatible = "snps,designware-i2c"; > - reg = <0x0 0x12060000 0x0 0x10000>; > - clocks = <&syscrg JH7110_SYSCLK_I2C6_APB>; > - clock-names = "ref"; > - resets = <&syscrg JH7110_SYSRST_I2C6_APB>; > - interrupts = <51>; > - #address-cells = <1>; > - #size-cells = <0>; > - status = "disabled"; > - }; > - > - power-controller@17030000 { > - compatible = "starfive,jh7110-pmu"; > - reg = <0x0 0x17030000 0x0 0x10000>; > - interrupts = <111>; > - }; > - > - qspi: spi@13010000 { > - compatible = "cdns,qspi-nor"; > - reg = <0x0 0x13010000 0x0 0x10000 > - 0x0 0x21000000 0x0 0x400000>; > - clocks = <&syscrg JH7110_SYSCLK_QSPI_REF>; > - clock-names = "clk_ref"; > - resets = <&syscrg JH7110_SYSRST_QSPI_APB>, > - <&syscrg JH7110_SYSRST_QSPI_AHB>, > - <&syscrg JH7110_SYSRST_QSPI_REF>; > - reset-names = "rst_apb", "rst_ahb", "rst_ref"; > - cdns,fifo-depth = <256>; > - cdns,fifo-width = <4>; > - #address-cells = <1>; > - #size-cells = <0>; > - }; > - > - syscrg: clock-controller@13020000 { > - compatible = "starfive,jh7110-syscrg"; > - reg = <0x0 0x13020000 0x0 0x10000>; > - clocks = <&osc>, <&gmac1_rmii_refin>, > - <&gmac1_rgmii_rxin>, > - <&i2stx_bclk_ext>, <&i2stx_lrck_ext>, > - <&i2srx_bclk_ext>, <&i2srx_lrck_ext>, > - <&tdm_ext>, <&mclk_ext>, > - <&pllclk JH7110_SYSCLK_PLL0_OUT>, > - <&pllclk JH7110_SYSCLK_PLL1_OUT>, > - <&pllclk JH7110_SYSCLK_PLL2_OUT>; > - clock-names = "osc", "gmac1_rmii_refin", > - "gmac1_rgmii_rxin", > - "i2stx_bclk_ext", "i2stx_lrck_ext", > - "i2srx_bclk_ext", "i2srx_lrck_ext", > - "tdm_ext", "mclk_ext", > - "pll0_out", "pll1_out", "pll2_out"; > - #clock-cells = <1>; > - #reset-cells = <1>; > - }; > - > - sys_syscon: sys_syscon@13030000 { > - compatible = "starfive,jh7110-sys-syscon","syscon", "simple-mfd"; > - reg = <0x0 0x13030000 0x0 0x1000>; > - > - pllclk: clock-controller { > - compatible = "starfive,jh7110-pll"; > - clocks = <&osc>; > - #clock-cells = <1>; > - }; > - }; > - > - sysgpio: pinctrl@13040000 { > - compatible = "starfive,jh7110-sys-pinctrl"; > - reg = <0x0 0x13040000 0x0 0x10000>; > - clocks = <&syscrg JH7110_SYSCLK_IOMUX_APB>; > - resets = <&syscrg JH7110_SYSRST_IOMUX_APB>; > - interrupts = <86>; > - interrupt-controller; > - #interrupt-cells = <2>; > - gpio-controller; > - #gpio-cells = <2>; > - }; > - > - watchdog@13070000 { > - compatible = "starfive,jh7110-wdt"; > - reg = <0x0 0x13070000 0x0 0x10000>; > - clocks = <&syscrg JH7110_SYSCLK_WDT_APB>, > - <&syscrg JH7110_SYSCLK_WDT_CORE>; > - clock-names = "apb", "core"; > - resets = <&syscrg JH7110_SYSRST_WDT_APB>, > - <&syscrg JH7110_SYSRST_WDT_CORE>; > - }; > - > - mmc0: mmc@16010000 { > - compatible = "starfive,jh7110-mmc"; > - reg = <0x0 0x16010000 0x0 0x10000>; > - clocks = <&syscrg JH7110_SYSCLK_SDIO0_AHB>, > - <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>; > - clock-names = "biu", "ciu"; > - resets = <&syscrg JH7110_SYSRST_SDIO0_AHB>; > - reset-names = "reset"; > - interrupts = <74>; > - fifo-depth = <32>; > - fifo-watermark-aligned; > - data-addr = <0>; > - starfive,sysreg = <&sys_syscon 0x14 0x1a 0x7c000000>; > - status = "disabled"; > - }; > - > - mmc1: mmc@16020000 { > - compatible = "starfive,jh7110-mmc"; > - reg = <0x0 0x16020000 0x0 0x10000>; > - clocks = <&syscrg JH7110_SYSCLK_SDIO1_AHB>, > - <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>; > - clock-names = "biu", "ciu"; > - resets = <&syscrg JH7110_SYSRST_SDIO1_AHB>; > - reset-names = "reset"; > - interrupts = <75>; > - fifo-depth = <32>; > - fifo-watermark-aligned; > - data-addr = <0>; > - starfive,sysreg = <&sys_syscon 0x9c 0x1 0x3e>; > - status = "disabled"; > - }; > - > - gmac0: ethernet@16030000 { > - compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20"; > - reg = <0x0 0x16030000 0x0 0x10000>; > - clocks = <&aoncrg JH7110_AONCLK_GMAC0_AXI>, > - <&aoncrg JH7110_AONCLK_GMAC0_AHB>, > - <&syscrg JH7110_SYSCLK_GMAC0_PTP>, > - <&aoncrg JH7110_AONCLK_GMAC0_TX_INV>, > - <&syscrg JH7110_SYSCLK_GMAC0_GTXC>; > - clock-names = "stmmaceth", "pclk", "ptp_ref", > - "tx", "gtx"; > - resets = <&aoncrg JH7110_AONRST_GMAC0_AXI>, > - <&aoncrg JH7110_AONRST_GMAC0_AHB>; > - reset-names = "stmmaceth", "ahb"; > - interrupts = <7>, <6>, <5>; > - interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; > - snps,multicast-filter-bins = <64>; > - snps,perfect-filter-entries = <8>; > - rx-fifo-depth = <2048>; > - tx-fifo-depth = <2048>; > - snps,fixed-burst; > - snps,no-pbl-x8; > - snps,force_thresh_dma_mode; > - snps,axi-config = <&stmmac_axi_setup>; > - snps,tso; > - snps,en-tx-lpi-clockgating; > - snps,txpbl = <16>; > - snps,rxpbl = <16>; > - starfive,syscon = <&aon_syscon 0xc 0x12>; > - status = "disabled"; > - }; > - > - gmac1: ethernet@16040000 { > - compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20"; > - reg = <0x0 0x16040000 0x0 0x10000>; > - clocks = <&syscrg JH7110_SYSCLK_GMAC1_AXI>, > - <&syscrg JH7110_SYSCLK_GMAC1_AHB>, > - <&syscrg JH7110_SYSCLK_GMAC1_PTP>, > - <&syscrg JH7110_SYSCLK_GMAC1_TX_INV>, > - <&syscrg JH7110_SYSCLK_GMAC1_GTXC>; > - clock-names = "stmmaceth", "pclk", "ptp_ref", > - "tx", "gtx"; > - resets = <&syscrg JH7110_SYSRST_GMAC1_AXI>, > - <&syscrg JH7110_SYSRST_GMAC1_AHB>; > - reset-names = "stmmaceth", "ahb"; > - interrupts = <78>, <77>, <76>; > - interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; > - snps,multicast-filter-bins = <64>; > - snps,perfect-filter-entries = <8>; > - rx-fifo-depth = <2048>; > - tx-fifo-depth = <2048>; > - snps,fixed-burst; > - snps,no-pbl-x8; > - snps,force_thresh_dma_mode; > - snps,axi-config = <&stmmac_axi_setup>; > - snps,tso; > - snps,en-tx-lpi-clockgating; > - snps,txpbl = <16>; > - snps,rxpbl = <16>; > - starfive,syscon = <&sys_syscon 0x90 0x2>; > - status = "disabled"; > - }; > - > - rng: rng@1600c000 { > - compatible = "starfive,jh7110-trng"; > - reg = <0x0 0x1600C000 0x0 0x4000>; > - clocks = <&stgcrg JH7110_STGCLK_SEC_HCLK>, > - <&stgcrg JH7110_STGCLK_SEC_MISCAHB>; > - clock-names = "hclk", "ahb"; > - resets = <&stgcrg JH7110_STGRST_SEC_TOP_HRESETN>; > - interrupts = <30>; > - }; > - > - aoncrg: clock-controller@17000000 { > - compatible = "starfive,jh7110-aoncrg"; > - reg = <0x0 0x17000000 0x0 0x10000>; > - clocks = <&osc>, <&rtc_osc>, > - <&gmac0_rmii_refin>, <&gmac0_rgmii_rxin>, > - <&syscrg JH7110_SYSCLK_STG_AXIAHB>, > - <&syscrg JH7110_SYSCLK_APB_BUS>, > - <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>; > - clock-names = "osc", "rtc_osc", "gmac0_rmii_refin", > - "gmac0_rgmii_rxin", "stg_axiahb", > - "apb_bus", "gmac0_gtxclk"; > - #clock-cells = <1>; > - #reset-cells = <1>; > - }; > - > - aon_syscon: aon_syscon@17010000 { > - compatible = "starfive,jh7110-aon-syscon","syscon"; > - reg = <0x0 0x17010000 0x0 0x1000>; > - }; > - > - aongpio: pinctrl@17020000 { > - compatible = "starfive,jh7110-aon-pinctrl"; > - reg = <0x0 0x17020000 0x0 0x10000>; > - resets = <&aoncrg JH7110_AONRST_IOMUX>; > - interrupts = <85>; > - interrupt-controller; > - #interrupt-cells = <2>; > - gpio-controller; > - #gpio-cells = <2>; > - }; > - > - pcie0: pcie@2b000000 { > - compatible = "starfive,jh7110-pcie"; > - reg = <0x0 0x2b000000 0x0 0x1000000 > - 0x9 0x40000000 0x0 0x10000000>; > - reg-names = "reg", "config"; > - #address-cells = <3>; > - #size-cells = <2>; > - #interrupt-cells = <1>; > - ranges = <0x82000000 0x0 0x30000000 0x0 0x30000000 0x0 0x08000000>, > - <0xc3000000 0x9 0x00000000 0x9 0x00000000 0x0 0x40000000>; > - interrupts = <56>; > - interrupt-parent = <&plic>; > - interrupt-map-mask = <0x0 0x0 0x0 0x7>; > - interrupt-map = <0x0 0x0 0x0 0x1 &plic 0x1>, > - <0x0 0x0 0x0 0x2 &plic 0x2>, > - <0x0 0x0 0x0 0x3 &plic 0x3>, > - <0x0 0x0 0x0 0x4 &plic 0x4>; > - msi-parent = <&plic>; > - device_type = "pci"; > - starfive,stg-syscon = <&stg_syscon 0xc0 0xc4 0x130 0x1b8>; > - bus-range = <0x0 0xff>; > - clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>, > - <&stgcrg JH7110_STGCLK_PCIE0_TL>, > - <&stgcrg JH7110_STGCLK_PCIE0_AXI>, > - <&stgcrg JH7110_STGCLK_PCIE0_APB>; > - clock-names = "noc", "tl", "axi", "apb"; > - resets = <&stgcrg JH7110_STGRST_PCIE0_MST0>, > - <&stgcrg JH7110_STGRST_PCIE0_SLV0>, > - <&stgcrg JH7110_STGRST_PCIE0_SLV>, > - <&stgcrg JH7110_STGRST_PCIE0_BRG>, > - <&stgcrg JH7110_STGRST_PCIE0_CORE>, > - <&stgcrg JH7110_STGRST_PCIE0_APB>; > - reset-names = "mst0", "slv0", "slv", "brg", > - "core", "apb"; > - status = "disabled"; > - }; > - > - pcie1: pcie@2c000000 { > - compatible = "starfive,jh7110-pcie"; > - reg = <0x0 0x2c000000 0x0 0x1000000 > - 0x9 0xc0000000 0x0 0x10000000>; > - reg-names = "reg", "config"; > - #address-cells = <3>; > - #size-cells = <2>; > - #interrupt-cells = <1>; > - ranges = <0x82000000 0x0 0x38000000 0x0 0x38000000 0x0 0x08000000>, > - <0xc3000000 0x9 0x80000000 0x9 0x80000000 0x0 0x40000000>; > - interrupts = <57>; > - interrupt-parent = <&plic>; > - interrupt-map-mask = <0x0 0x0 0x0 0x7>; > - interrupt-map = <0x0 0x0 0x0 0x1 &plic 0x1>, > - <0x0 0x0 0x0 0x2 &plic 0x2>, > - <0x0 0x0 0x0 0x3 &plic 0x3>, > - <0x0 0x0 0x0 0x4 &plic 0x4>; > - msi-parent = <&plic>; > - device_type = "pci"; > - starfive,stg-syscon = <&stg_syscon 0x270 0x274 0x2e0 0x368>; > - bus-range = <0x0 0xff>; > - clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>, > - <&stgcrg JH7110_STGCLK_PCIE1_TL>, > - <&stgcrg JH7110_STGCLK_PCIE1_AXI>, > - <&stgcrg JH7110_STGCLK_PCIE1_APB>; > - clock-names = "noc", "tl", "axi", "apb"; > - resets = <&stgcrg JH7110_STGRST_PCIE1_MST0>, > - <&stgcrg JH7110_STGRST_PCIE1_SLV0>, > - <&stgcrg JH7110_STGRST_PCIE1_SLV>, > - <&stgcrg JH7110_STGRST_PCIE1_BRG>, > - <&stgcrg JH7110_STGRST_PCIE1_CORE>, > - <&stgcrg JH7110_STGRST_PCIE1_APB>; > - reset-names = "mst0", "slv0", "slv", "brg", > - "core", "apb"; > - status = "disabled"; > - }; > - }; > -};
On 11/11/2024 6:26 PM, Heinrich Schuchardt wrote: > On 11/11/24 03:07, Hal Feng wrote: >> JH7110 boards switch to using upstream DT, so drop >> redundant DT files from arch/riscv/dts/. >> >> Signed-off-by: Hal Feng <hal.feng@starfivetech.com> > > I added paches 1/13 and 2/13 to origin/master. > > make starfive_visionfive2_defconfig > make > > yielded the following error: > > Â DTC > dts/upstream/src/riscv/starfive/jh7110-starfive-visionfive-2-v1.3b.dtb > Error: dts/upstream/src/riscv/starfive/jh7110.dtsi:518.15-16 syntax error > FATAL ERROR: Unable to parse input tree > Check > /home/zfsdt/workspace/u-boot-build/denx/dts/upstream/src/riscv/starfive/.jh7110-starfive-visionfive-2-v1.3b.dtb.pre.tmp > for errors > make[2]: *** [scripts/Makefile.lib:423: > dts/upstream/src/riscv/starfive/jh7110-starfive-visionfive-2-v1.3b.dtb] > Error 1 > make[1]: *** [dts/Makefile:60: arch-dtbs] Error 2 > make: *** [Makefile:1175: dts/dt.dtb] Error 2 > make: *** Waiting for unfinished jobs.... > > include/dt-bindings/clock/starfive,jh7110-crg.h > which does *not* include the symbol JH7110_SYSCLK_TDM_TDM is evaluated > instead of > dts/upstream/include/dt-bindings/clock/starfive,jh7110-crg.h > which contains the symbol JH7110_SYSCLK_TDM_TDM. > > We want git bisect to work. Hence we must ensure that after each > individual patch building works. > > Before merging the series we need a patch ensuring that upstream > includes are used. > The include/ dir is included before dts/upstream/include/. To make git bisect work, one choice here is merging patch 1~5 together. Best regards, Hal
diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile index de356584bf..07ebe530bd 100644 --- a/arch/riscv/dts/Makefile +++ b/arch/riscv/dts/Makefile @@ -7,7 +7,6 @@ dtb-$(CONFIG_TARGET_OPENPITON_RISCV64) += openpiton-riscv64.dtb dtb-$(CONFIG_TARGET_SIFIVE_UNLEASHED) += hifive-unleashed-a00.dtb dtb-$(CONFIG_TARGET_SIFIVE_UNMATCHED) += hifive-unmatched-a00.dtb dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb -dtb-$(CONFIG_TARGET_STARFIVE_VISIONFIVE2) += jh7110-starfive-visionfive-2.dtb dtb-$(CONFIG_TARGET_TH1520_LPI4A) += th1520-lichee-pi-4a.dtb dtb-$(CONFIG_TARGET_XILINX_MBV) += xilinx-mbv32.dtb dtb-$(CONFIG_TARGET_XILINX_MBV) += xilinx-mbv64.dtb diff --git a/arch/riscv/dts/jh7110-starfive-visionfive-2.dts b/arch/riscv/dts/jh7110-starfive-visionfive-2.dts deleted file mode 100644 index 288ea39493..0000000000 --- a/arch/riscv/dts/jh7110-starfive-visionfive-2.dts +++ /dev/null @@ -1,11 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT -/* - * Copyright (C) 2023 StarFive Technology Co., Ltd. - */ - -/dts-v1/; -#include "jh7110-starfive-visionfive-2.dtsi" - -/ { - compatible = "starfive,visionfive-2-v1.3b", "starfive,jh7110"; -}; diff --git a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi deleted file mode 100644 index e11babc1cd..0000000000 --- a/arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi +++ /dev/null @@ -1,380 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT -/* - * Copyright (C) 2022 StarFive Technology Co., Ltd. - */ - -/dts-v1/; - -#include "jh7110.dtsi" -#include <dt-bindings/pinctrl/pinctrl-starfive-jh7110.h> -#include <dt-bindings/gpio/gpio.h> -/ { - aliases { - serial0 = &uart0; - spi0 = &qspi; - mmc0 = &mmc0; - mmc1 = &mmc1; - i2c0 = &i2c0; - i2c2 = &i2c2; - i2c5 = &i2c5; - i2c6 = &i2c6; - ethernet0 = &gmac0; - ethernet1 = &gmac1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cpus { - timebase-frequency = <4000000>; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0x0 0x40000000 0x2 0x0>; - }; - - gpio-restart { - compatible = "gpio-restart"; - gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>; - }; -}; - -&osc { - clock-frequency = <24000000>; -}; - -&rtc_osc { - clock-frequency = <32768>; -}; - -&gmac0_rmii_refin { - clock-frequency = <50000000>; -}; - -&gmac0_rgmii_rxin { - clock-frequency = <125000000>; -}; - -&gmac1_rmii_refin { - clock-frequency = <50000000>; -}; - -&gmac1_rgmii_rxin { - clock-frequency = <125000000>; -}; - -&i2stx_bclk_ext { - clock-frequency = <12288000>; -}; - -&i2stx_lrck_ext { - clock-frequency = <192000>; -}; - -&i2srx_bclk_ext { - clock-frequency = <12288000>; -}; - -&i2srx_lrck_ext { - clock-frequency = <192000>; -}; - -&tdm_ext { - clock-frequency = <49152000>; -}; - -&mclk_ext { - clock-frequency = <12288000>; -}; - -&uart0 { - reg-offset = <0>; - current-speed = <115200>; - clock-frequency = <24000000>; - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <100000>; - i2c-sda-hold-time-ns = <300>; - i2c-sda-falling-time-ns = <510>; - i2c-scl-falling-time-ns = <510>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "okay"; -}; - -&i2c2 { - clock-frequency = <100000>; - i2c-sda-hold-time-ns = <300>; - i2c-sda-falling-time-ns = <510>; - i2c-scl-falling-time-ns = <510>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - status = "okay"; -}; - -&i2c5 { - clock-frequency = <100000>; - i2c-sda-hold-time-ns = <300>; - i2c-sda-falling-time-ns = <510>; - i2c-scl-falling-time-ns = <510>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_pins>; - status = "okay"; - - pmic@36 { - compatible = "x-powers,axp15060"; - reg = <0x36>; - }; - - eeprom@50 { - compatible = "atmel,24c04"; - reg = <0x50>; - pagesize = <16>; - }; -}; - -&i2c6 { - clock-frequency = <100000>; - i2c-sda-hold-time-ns = <300>; - i2c-sda-falling-time-ns = <510>; - i2c-scl-falling-time-ns = <510>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_pins>; - status = "okay"; -}; - -&sysgpio { - status = "okay"; - uart0_pins: uart0-0 { - tx-pins { - pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX, - GPOEN_ENABLE, - GPI_NONE)>; - bias-disable; - drive-strength = <12>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - - rx-pins { - pinmux = <GPIOMUX(6, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_UART0_RX)>; - bias-disable; /* external pull-up */ - drive-strength = <2>; - input-enable; - input-schmitt-enable; - slew-rate = <0>; - }; - }; - - i2c0_pins: i2c0-0 { - i2c-pins { - pinmux = <GPIOMUX(57, GPOUT_LOW, - GPOEN_SYS_I2C0_CLK, - GPI_SYS_I2C0_CLK)>, - <GPIOMUX(58, GPOUT_LOW, - GPOEN_SYS_I2C0_DATA, - GPI_SYS_I2C0_DATA)>; - bias-disable; /* external pull-up */ - input-enable; - input-schmitt-enable; - }; - }; - - i2c2_pins: i2c2-0 { - i2c-pins { - pinmux = <GPIOMUX(3, GPOUT_LOW, - GPOEN_SYS_I2C2_CLK, - GPI_SYS_I2C2_CLK)>, - <GPIOMUX(2, GPOUT_LOW, - GPOEN_SYS_I2C2_DATA, - GPI_SYS_I2C2_DATA)>; - bias-disable; /* external pull-up */ - input-enable; - input-schmitt-enable; - }; - }; - - i2c5_pins: i2c5-0 { - i2c-pins { - pinmux = <GPIOMUX(19, GPOUT_LOW, - GPOEN_SYS_I2C5_CLK, - GPI_SYS_I2C5_CLK)>, - <GPIOMUX(20, GPOUT_LOW, - GPOEN_SYS_I2C5_DATA, - GPI_SYS_I2C5_DATA)>; - bias-disable; /* external pull-up */ - input-enable; - input-schmitt-enable; - }; - }; - - i2c6_pins: i2c6-0 { - i2c-pins { - pinmux = <GPIOMUX(16, GPOUT_LOW, - GPOEN_SYS_I2C6_CLK, - GPI_SYS_I2C6_CLK)>, - <GPIOMUX(17, GPOUT_LOW, - GPOEN_SYS_I2C6_DATA, - GPI_SYS_I2C6_DATA)>; - bias-disable; /* external pull-up */ - input-enable; - input-schmitt-enable; - }; - }; - - mmc0_pins: mmc0-pins { - mmc0-pins-rest { - pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST, - GPOEN_ENABLE, GPI_NONE)>; - bias-pull-up; - drive-strength = <12>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - }; - - mmc1_pins: mmc1-pins { - mmc1-pins0 { - pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK, - GPOEN_ENABLE, GPI_NONE)>; - bias-pull-up; - drive-strength = <12>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - - mmc1-pins1 { - pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD, - GPOEN_SYS_SDIO1_CMD, GPI_SYS_SDIO1_CMD)>, - <GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0, - GPOEN_SYS_SDIO1_DATA0, GPI_SYS_SDIO1_DATA0)>, - <GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1, - GPOEN_SYS_SDIO1_DATA1, GPI_SYS_SDIO1_DATA1)>, - <GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2, - GPOEN_SYS_SDIO1_DATA2, GPI_SYS_SDIO1_DATA2)>, - <GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3, - GPOEN_SYS_SDIO1_DATA3, GPI_SYS_SDIO1_DATA3)>; - bias-pull-up; - drive-strength = <12>; - input-enable; - input-schmitt-enable; - slew-rate = <0>; - }; - }; -}; - -&mmc0 { - compatible = "snps,dw-mshc"; - max-frequency = <100000000>; - bus-width = <8>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - non-removable; - cap-mmc-hw-reset; - post-power-on-delay-ms = <200>; - status = "okay"; - -}; - -&mmc1 { - compatible = "snps,dw-mshc"; - max-frequency = <100000000>; - bus-width = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; - no-sdio; - no-mmc; - cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>; - cap-sd-highspeed; - post-power-on-delay-ms = <200>; - status = "okay"; -}; - -&qspi { - spi-max-frequency = <250000000>; - status = "okay"; - - nor-flash@0 { - compatible = "jedec,spi-nor"; - reg=<0>; - spi-max-frequency = <100000000>; - cdns,tshsl-ns = <1>; - cdns,tsd2d-ns = <1>; - cdns,tchsh-ns = <1>; - cdns,tslch-ns = <1>; - }; -}; - -&pcie0 { - reset-gpios = <&sysgpio 26 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&pcie1 { - reset-gpios = <&sysgpio 28 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&syscrg { - assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_ROOT>, - <&syscrg JH7110_SYSCLK_BUS_ROOT>, - <&syscrg JH7110_SYSCLK_PERH_ROOT>, - <&syscrg JH7110_SYSCLK_QSPI_REF>; - assigned-clock-parents = <&pllclk JH7110_SYSCLK_PLL0_OUT>, - <&pllclk JH7110_SYSCLK_PLL2_OUT>, - <&pllclk JH7110_SYSCLK_PLL2_OUT>, - <&syscrg JH7110_SYSCLK_QSPI_REF_SRC>; - assigned-clock-rates = <0>, <0>, <0>, <0>; -}; - -&aoncrg { - assigned-clocks = <&aoncrg JH7110_AONCLK_APB_FUNC>; - assigned-clock-parents = <&osc>; - assigned-clock-rates = <0>; -}; - -&gmac0 { - phy-handle = <&phy0>; - phy-mode = "rgmii-id"; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; -}; - -&gmac1 { - phy-handle = <&phy1>; - phy-mode = "rgmii-id"; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - - phy1: ethernet-phy@1 { - reg = <0>; - }; - }; -}; diff --git a/arch/riscv/dts/jh7110.dtsi b/arch/riscv/dts/jh7110.dtsi deleted file mode 100644 index 2cdc683d49..0000000000 --- a/arch/riscv/dts/jh7110.dtsi +++ /dev/null @@ -1,761 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT -/* - * Copyright (C) 2022 StarFive Technology Co., Ltd. - */ - -/dts-v1/; -#include <dt-bindings/clock/starfive,jh7110-crg.h> -#include <dt-bindings/reset/starfive,jh7110-crg.h> - -/ { - compatible = "starfive,jh7110"; - #address-cells = <2>; - #size-cells = <2>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - S7_0: cpu@0 { - compatible = "sifive,s7", "riscv"; - reg = <0>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <16384>; - next-level-cache = <&ccache>; - riscv,isa = "rv64imac_zba_zbb"; - status = "disabled"; - - cpu0_intc: interrupt-controller { - compatible = "riscv,cpu-intc"; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - - U74_1: cpu@1 { - compatible = "sifive,u74-mc", "riscv"; - reg = <1>; - d-cache-block-size = <64>; - d-cache-sets = <64>; - d-cache-size = <32768>; - d-tlb-sets = <1>; - d-tlb-size = <40>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <32768>; - i-tlb-sets = <1>; - i-tlb-size = <40>; - mmu-type = "riscv,sv39"; - next-level-cache = <&ccache>; - riscv,isa = "rv64imafdc_zba_zbb"; - tlb-split; - - cpu1_intc: interrupt-controller { - compatible = "riscv,cpu-intc"; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - - U74_2: cpu@2 { - compatible = "sifive,u74-mc", "riscv"; - reg = <2>; - d-cache-block-size = <64>; - d-cache-sets = <64>; - d-cache-size = <32768>; - d-tlb-sets = <1>; - d-tlb-size = <40>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <32768>; - i-tlb-sets = <1>; - i-tlb-size = <40>; - mmu-type = "riscv,sv39"; - next-level-cache = <&ccache>; - riscv,isa = "rv64imafdc_zba_zbb"; - tlb-split; - - cpu2_intc: interrupt-controller { - compatible = "riscv,cpu-intc"; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - - U74_3: cpu@3 { - compatible = "sifive,u74-mc", "riscv"; - reg = <3>; - d-cache-block-size = <64>; - d-cache-sets = <64>; - d-cache-size = <32768>; - d-tlb-sets = <1>; - d-tlb-size = <40>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <32768>; - i-tlb-sets = <1>; - i-tlb-size = <40>; - mmu-type = "riscv,sv39"; - next-level-cache = <&ccache>; - riscv,isa = "rv64imafdc_zba_zbb"; - tlb-split; - - cpu3_intc: interrupt-controller { - compatible = "riscv,cpu-intc"; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - - U74_4: cpu@4 { - compatible = "sifive,u74-mc", "riscv"; - reg = <4>; - d-cache-block-size = <64>; - d-cache-sets = <64>; - d-cache-size = <32768>; - d-tlb-sets = <1>; - d-tlb-size = <40>; - device_type = "cpu"; - i-cache-block-size = <64>; - i-cache-sets = <64>; - i-cache-size = <32768>; - i-tlb-sets = <1>; - i-tlb-size = <40>; - mmu-type = "riscv,sv39"; - next-level-cache = <&ccache>; - riscv,isa = "rv64imafdc_zba_zbb"; - tlb-split; - - cpu4_intc: interrupt-controller { - compatible = "riscv,cpu-intc"; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - - cpu-map { - cluster0 { - core0 { - cpu = <&S7_0>; - }; - - core1 { - cpu = <&U74_1>; - }; - - core2 { - cpu = <&U74_2>; - }; - - core3 { - cpu = <&U74_3>; - }; - - core4 { - cpu = <&U74_4>; - }; - }; - }; - }; - - timer { - compatible = "riscv,timer"; - interrupts-extended = <&cpu0_intc 5>, - <&cpu1_intc 5>, - <&cpu2_intc 5>, - <&cpu3_intc 5>, - <&cpu4_intc 5>; - }; - - osc: oscillator { - compatible = "fixed-clock"; - clock-output-names = "osc"; - #clock-cells = <0>; - }; - - rtc_osc: rtc-oscillator { - compatible = "fixed-clock"; - clock-output-names = "rtc_osc"; - #clock-cells = <0>; - }; - - gmac0_rmii_refin: gmac0-rmii-refin-clock { - compatible = "fixed-clock"; - clock-output-names = "gmac0_rmii_refin"; - #clock-cells = <0>; - }; - - gmac0_rgmii_rxin: gmac0-rgmii-rxin-clock { - compatible = "fixed-clock"; - clock-output-names = "gmac0_rgmii_rxin"; - #clock-cells = <0>; - }; - - gmac1_rmii_refin: gmac1-rmii-refin-clock { - compatible = "fixed-clock"; - clock-output-names = "gmac1_rmii_refin"; - #clock-cells = <0>; - }; - - gmac1_rgmii_rxin: gmac1-rgmii-rxin-clock { - compatible = "fixed-clock"; - clock-output-names = "gmac1_rgmii_rxin"; - #clock-cells = <0>; - }; - - i2stx_bclk_ext: i2stx-bclk-ext-clock { - compatible = "fixed-clock"; - clock-output-names = "i2stx_bclk_ext"; - #clock-cells = <0>; - }; - - i2stx_lrck_ext: i2stx-lrck-ext-clock { - compatible = "fixed-clock"; - clock-output-names = "i2stx_lrck_ext"; - #clock-cells = <0>; - }; - - i2srx_bclk_ext: i2srx-bclk-ext-clock { - compatible = "fixed-clock"; - clock-output-names = "i2srx_bclk_ext"; - #clock-cells = <0>; - }; - - i2srx_lrck_ext: i2srx-lrck-ext-clock { - compatible = "fixed-clock"; - clock-output-names = "i2srx_lrck_ext"; - #clock-cells = <0>; - }; - - tdm_ext: tdm-ext-clock { - compatible = "fixed-clock"; - clock-output-names = "tdm_ext"; - #clock-cells = <0>; - }; - - mclk_ext: mclk-ext-clock { - compatible = "fixed-clock"; - clock-output-names = "mclk_ext"; - #clock-cells = <0>; - }; - - stmmac_axi_setup: stmmac-axi-config { - snps,lpi_en; - snps,wr_osr_lmt = <4>; - snps,rd_osr_lmt = <4>; - snps,blen = <256 128 64 32 0 0 0>; - }; - - soc { - compatible = "simple-bus"; - interrupt-parent = <&plic>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clint: timer@2000000 { - compatible = "starfive,jh7110-clint", "sifive,clint0"; - reg = <0x0 0x2000000 0x0 0x10000>; - interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, - <&cpu1_intc 3>, <&cpu1_intc 7>, - <&cpu2_intc 3>, <&cpu2_intc 7>, - <&cpu3_intc 3>, <&cpu3_intc 7>, - <&cpu4_intc 3>, <&cpu4_intc 7>; - }; - - plic: interrupt-controller@c000000 { - compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0"; - reg = <0x0 0xc000000 0x0 0x4000000>; - interrupts-extended = <&cpu0_intc 11>, - <&cpu1_intc 11>, <&cpu1_intc 9>, - <&cpu2_intc 11>, <&cpu2_intc 9>, - <&cpu3_intc 11>, <&cpu3_intc 9>, - <&cpu4_intc 11>, <&cpu4_intc 9>; - interrupt-controller; - #interrupt-cells = <1>; - #address-cells = <0>; - riscv,ndev = <136>; - }; - - ccache: cache-controller@2010000 { - compatible = "starfive,jh7110-ccache", "sifive,ccache0", "cache"; - reg = <0x0 0x2010000 0x0 0x4000>; - interrupts = <1>, <3>, <4>, <2>; - cache-block-size = <64>; - cache-level = <2>; - cache-sets = <2048>; - cache-size = <2097152>; - cache-unified; - }; - - uart0: serial@10000000 { - compatible = "snps,dw-apb-uart"; - reg = <0x0 0x10000000 0x0 0x10000>; - clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>, - <&syscrg JH7110_SYSCLK_UART0_APB>; - clock-names = "baudclk", "apb_pclk"; - resets = <&syscrg JH7110_SYSRST_UART0_APB>, - <&syscrg JH7110_SYSRST_UART0_CORE>; - interrupts = <32>; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart1: serial@10010000 { - compatible = "snps,dw-apb-uart"; - reg = <0x0 0x10010000 0x0 0x10000>; - clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>, - <&syscrg JH7110_SYSCLK_UART1_APB>; - clock-names = "baudclk", "apb_pclk"; - resets = <&syscrg JH7110_SYSRST_UART1_APB>, - <&syscrg JH7110_SYSRST_UART1_CORE>; - interrupts = <33>; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart2: serial@10020000 { - compatible = "snps,dw-apb-uart"; - reg = <0x0 0x10020000 0x0 0x10000>; - clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>, - <&syscrg JH7110_SYSCLK_UART2_APB>; - clock-names = "baudclk", "apb_pclk"; - resets = <&syscrg JH7110_SYSRST_UART2_APB>, - <&syscrg JH7110_SYSRST_UART2_CORE>; - interrupts = <34>; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - i2c0: i2c@10030000 { - compatible = "snps,designware-i2c"; - reg = <0x0 0x10030000 0x0 0x10000>; - clocks = <&syscrg JH7110_SYSCLK_I2C0_APB>; - clock-names = "ref"; - resets = <&syscrg JH7110_SYSRST_I2C0_APB>; - interrupts = <35>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c1: i2c@10040000 { - compatible = "snps,designware-i2c"; - reg = <0x0 0x10040000 0x0 0x10000>; - clocks = <&syscrg JH7110_SYSCLK_I2C1_APB>; - clock-names = "ref"; - resets = <&syscrg JH7110_SYSRST_I2C1_APB>; - interrupts = <36>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c2: i2c@10050000 { - compatible = "snps,designware-i2c"; - reg = <0x0 0x10050000 0x0 0x10000>; - clocks = <&syscrg JH7110_SYSCLK_I2C2_APB>; - clock-names = "ref"; - resets = <&syscrg JH7110_SYSRST_I2C2_APB>; - interrupts = <37>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - stgcrg: clock-controller@10230000 { - compatible = "starfive,jh7110-stgcrg"; - reg = <0x0 0x10230000 0x0 0x10000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - stg_syscon: stg_syscon@10240000 { - compatible = "starfive,jh7110-stg-syscon","syscon"; - reg = <0x0 0x10240000 0x0 0x1000>; - }; - - uart3: serial@12000000 { - compatible = "snps,dw-apb-uart"; - reg = <0x0 0x12000000 0x0 0x10000>; - clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>, - <&syscrg JH7110_SYSCLK_UART3_APB>; - clock-names = "baudclk", "apb_pclk"; - resets = <&syscrg JH7110_SYSRST_UART3_APB>, - <&syscrg JH7110_SYSRST_UART3_CORE>; - interrupts = <45>; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart4: serial@12010000 { - compatible = "snps,dw-apb-uart"; - reg = <0x0 0x12010000 0x0 0x10000>; - clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>, - <&syscrg JH7110_SYSCLK_UART4_APB>; - clock-names = "baudclk", "apb_pclk"; - resets = <&syscrg JH7110_SYSRST_UART4_APB>, - <&syscrg JH7110_SYSRST_UART4_CORE>; - interrupts = <46>; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - uart5: serial@12020000 { - compatible = "snps,dw-apb-uart"; - reg = <0x0 0x12020000 0x0 0x10000>; - clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>, - <&syscrg JH7110_SYSCLK_UART5_APB>; - clock-names = "baudclk", "apb_pclk"; - resets = <&syscrg JH7110_SYSRST_UART5_APB>, - <&syscrg JH7110_SYSRST_UART5_CORE>; - interrupts = <47>; - reg-io-width = <4>; - reg-shift = <2>; - status = "disabled"; - }; - - i2c3: i2c@12030000 { - compatible = "snps,designware-i2c"; - reg = <0x0 0x12030000 0x0 0x10000>; - clocks = <&syscrg JH7110_SYSCLK_I2C3_APB>; - clock-names = "ref"; - resets = <&syscrg JH7110_SYSRST_I2C3_APB>; - interrupts = <48>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c4: i2c@12040000 { - compatible = "snps,designware-i2c"; - reg = <0x0 0x12040000 0x0 0x10000>; - clocks = <&syscrg JH7110_SYSCLK_I2C4_APB>; - clock-names = "ref"; - resets = <&syscrg JH7110_SYSRST_I2C4_APB>; - interrupts = <49>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c5: i2c@12050000 { - compatible = "snps,designware-i2c"; - reg = <0x0 0x12050000 0x0 0x10000>; - clocks = <&syscrg JH7110_SYSCLK_I2C5_APB>; - clock-names = "ref"; - resets = <&syscrg JH7110_SYSRST_I2C5_APB>; - interrupts = <50>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c6: i2c@12060000 { - compatible = "snps,designware-i2c"; - reg = <0x0 0x12060000 0x0 0x10000>; - clocks = <&syscrg JH7110_SYSCLK_I2C6_APB>; - clock-names = "ref"; - resets = <&syscrg JH7110_SYSRST_I2C6_APB>; - interrupts = <51>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - power-controller@17030000 { - compatible = "starfive,jh7110-pmu"; - reg = <0x0 0x17030000 0x0 0x10000>; - interrupts = <111>; - }; - - qspi: spi@13010000 { - compatible = "cdns,qspi-nor"; - reg = <0x0 0x13010000 0x0 0x10000 - 0x0 0x21000000 0x0 0x400000>; - clocks = <&syscrg JH7110_SYSCLK_QSPI_REF>; - clock-names = "clk_ref"; - resets = <&syscrg JH7110_SYSRST_QSPI_APB>, - <&syscrg JH7110_SYSRST_QSPI_AHB>, - <&syscrg JH7110_SYSRST_QSPI_REF>; - reset-names = "rst_apb", "rst_ahb", "rst_ref"; - cdns,fifo-depth = <256>; - cdns,fifo-width = <4>; - #address-cells = <1>; - #size-cells = <0>; - }; - - syscrg: clock-controller@13020000 { - compatible = "starfive,jh7110-syscrg"; - reg = <0x0 0x13020000 0x0 0x10000>; - clocks = <&osc>, <&gmac1_rmii_refin>, - <&gmac1_rgmii_rxin>, - <&i2stx_bclk_ext>, <&i2stx_lrck_ext>, - <&i2srx_bclk_ext>, <&i2srx_lrck_ext>, - <&tdm_ext>, <&mclk_ext>, - <&pllclk JH7110_SYSCLK_PLL0_OUT>, - <&pllclk JH7110_SYSCLK_PLL1_OUT>, - <&pllclk JH7110_SYSCLK_PLL2_OUT>; - clock-names = "osc", "gmac1_rmii_refin", - "gmac1_rgmii_rxin", - "i2stx_bclk_ext", "i2stx_lrck_ext", - "i2srx_bclk_ext", "i2srx_lrck_ext", - "tdm_ext", "mclk_ext", - "pll0_out", "pll1_out", "pll2_out"; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - sys_syscon: sys_syscon@13030000 { - compatible = "starfive,jh7110-sys-syscon","syscon", "simple-mfd"; - reg = <0x0 0x13030000 0x0 0x1000>; - - pllclk: clock-controller { - compatible = "starfive,jh7110-pll"; - clocks = <&osc>; - #clock-cells = <1>; - }; - }; - - sysgpio: pinctrl@13040000 { - compatible = "starfive,jh7110-sys-pinctrl"; - reg = <0x0 0x13040000 0x0 0x10000>; - clocks = <&syscrg JH7110_SYSCLK_IOMUX_APB>; - resets = <&syscrg JH7110_SYSRST_IOMUX_APB>; - interrupts = <86>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - }; - - watchdog@13070000 { - compatible = "starfive,jh7110-wdt"; - reg = <0x0 0x13070000 0x0 0x10000>; - clocks = <&syscrg JH7110_SYSCLK_WDT_APB>, - <&syscrg JH7110_SYSCLK_WDT_CORE>; - clock-names = "apb", "core"; - resets = <&syscrg JH7110_SYSRST_WDT_APB>, - <&syscrg JH7110_SYSRST_WDT_CORE>; - }; - - mmc0: mmc@16010000 { - compatible = "starfive,jh7110-mmc"; - reg = <0x0 0x16010000 0x0 0x10000>; - clocks = <&syscrg JH7110_SYSCLK_SDIO0_AHB>, - <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>; - clock-names = "biu", "ciu"; - resets = <&syscrg JH7110_SYSRST_SDIO0_AHB>; - reset-names = "reset"; - interrupts = <74>; - fifo-depth = <32>; - fifo-watermark-aligned; - data-addr = <0>; - starfive,sysreg = <&sys_syscon 0x14 0x1a 0x7c000000>; - status = "disabled"; - }; - - mmc1: mmc@16020000 { - compatible = "starfive,jh7110-mmc"; - reg = <0x0 0x16020000 0x0 0x10000>; - clocks = <&syscrg JH7110_SYSCLK_SDIO1_AHB>, - <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>; - clock-names = "biu", "ciu"; - resets = <&syscrg JH7110_SYSRST_SDIO1_AHB>; - reset-names = "reset"; - interrupts = <75>; - fifo-depth = <32>; - fifo-watermark-aligned; - data-addr = <0>; - starfive,sysreg = <&sys_syscon 0x9c 0x1 0x3e>; - status = "disabled"; - }; - - gmac0: ethernet@16030000 { - compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20"; - reg = <0x0 0x16030000 0x0 0x10000>; - clocks = <&aoncrg JH7110_AONCLK_GMAC0_AXI>, - <&aoncrg JH7110_AONCLK_GMAC0_AHB>, - <&syscrg JH7110_SYSCLK_GMAC0_PTP>, - <&aoncrg JH7110_AONCLK_GMAC0_TX_INV>, - <&syscrg JH7110_SYSCLK_GMAC0_GTXC>; - clock-names = "stmmaceth", "pclk", "ptp_ref", - "tx", "gtx"; - resets = <&aoncrg JH7110_AONRST_GMAC0_AXI>, - <&aoncrg JH7110_AONRST_GMAC0_AHB>; - reset-names = "stmmaceth", "ahb"; - interrupts = <7>, <6>, <5>; - interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; - snps,multicast-filter-bins = <64>; - snps,perfect-filter-entries = <8>; - rx-fifo-depth = <2048>; - tx-fifo-depth = <2048>; - snps,fixed-burst; - snps,no-pbl-x8; - snps,force_thresh_dma_mode; - snps,axi-config = <&stmmac_axi_setup>; - snps,tso; - snps,en-tx-lpi-clockgating; - snps,txpbl = <16>; - snps,rxpbl = <16>; - starfive,syscon = <&aon_syscon 0xc 0x12>; - status = "disabled"; - }; - - gmac1: ethernet@16040000 { - compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20"; - reg = <0x0 0x16040000 0x0 0x10000>; - clocks = <&syscrg JH7110_SYSCLK_GMAC1_AXI>, - <&syscrg JH7110_SYSCLK_GMAC1_AHB>, - <&syscrg JH7110_SYSCLK_GMAC1_PTP>, - <&syscrg JH7110_SYSCLK_GMAC1_TX_INV>, - <&syscrg JH7110_SYSCLK_GMAC1_GTXC>; - clock-names = "stmmaceth", "pclk", "ptp_ref", - "tx", "gtx"; - resets = <&syscrg JH7110_SYSRST_GMAC1_AXI>, - <&syscrg JH7110_SYSRST_GMAC1_AHB>; - reset-names = "stmmaceth", "ahb"; - interrupts = <78>, <77>, <76>; - interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; - snps,multicast-filter-bins = <64>; - snps,perfect-filter-entries = <8>; - rx-fifo-depth = <2048>; - tx-fifo-depth = <2048>; - snps,fixed-burst; - snps,no-pbl-x8; - snps,force_thresh_dma_mode; - snps,axi-config = <&stmmac_axi_setup>; - snps,tso; - snps,en-tx-lpi-clockgating; - snps,txpbl = <16>; - snps,rxpbl = <16>; - starfive,syscon = <&sys_syscon 0x90 0x2>; - status = "disabled"; - }; - - rng: rng@1600c000 { - compatible = "starfive,jh7110-trng"; - reg = <0x0 0x1600C000 0x0 0x4000>; - clocks = <&stgcrg JH7110_STGCLK_SEC_HCLK>, - <&stgcrg JH7110_STGCLK_SEC_MISCAHB>; - clock-names = "hclk", "ahb"; - resets = <&stgcrg JH7110_STGRST_SEC_TOP_HRESETN>; - interrupts = <30>; - }; - - aoncrg: clock-controller@17000000 { - compatible = "starfive,jh7110-aoncrg"; - reg = <0x0 0x17000000 0x0 0x10000>; - clocks = <&osc>, <&rtc_osc>, - <&gmac0_rmii_refin>, <&gmac0_rgmii_rxin>, - <&syscrg JH7110_SYSCLK_STG_AXIAHB>, - <&syscrg JH7110_SYSCLK_APB_BUS>, - <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>; - clock-names = "osc", "rtc_osc", "gmac0_rmii_refin", - "gmac0_rgmii_rxin", "stg_axiahb", - "apb_bus", "gmac0_gtxclk"; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - aon_syscon: aon_syscon@17010000 { - compatible = "starfive,jh7110-aon-syscon","syscon"; - reg = <0x0 0x17010000 0x0 0x1000>; - }; - - aongpio: pinctrl@17020000 { - compatible = "starfive,jh7110-aon-pinctrl"; - reg = <0x0 0x17020000 0x0 0x10000>; - resets = <&aoncrg JH7110_AONRST_IOMUX>; - interrupts = <85>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - }; - - pcie0: pcie@2b000000 { - compatible = "starfive,jh7110-pcie"; - reg = <0x0 0x2b000000 0x0 0x1000000 - 0x9 0x40000000 0x0 0x10000000>; - reg-names = "reg", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0x0 0x30000000 0x0 0x30000000 0x0 0x08000000>, - <0xc3000000 0x9 0x00000000 0x9 0x00000000 0x0 0x40000000>; - interrupts = <56>; - interrupt-parent = <&plic>; - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0x0 0x0 0x0 0x1 &plic 0x1>, - <0x0 0x0 0x0 0x2 &plic 0x2>, - <0x0 0x0 0x0 0x3 &plic 0x3>, - <0x0 0x0 0x0 0x4 &plic 0x4>; - msi-parent = <&plic>; - device_type = "pci"; - starfive,stg-syscon = <&stg_syscon 0xc0 0xc4 0x130 0x1b8>; - bus-range = <0x0 0xff>; - clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>, - <&stgcrg JH7110_STGCLK_PCIE0_TL>, - <&stgcrg JH7110_STGCLK_PCIE0_AXI>, - <&stgcrg JH7110_STGCLK_PCIE0_APB>; - clock-names = "noc", "tl", "axi", "apb"; - resets = <&stgcrg JH7110_STGRST_PCIE0_MST0>, - <&stgcrg JH7110_STGRST_PCIE0_SLV0>, - <&stgcrg JH7110_STGRST_PCIE0_SLV>, - <&stgcrg JH7110_STGRST_PCIE0_BRG>, - <&stgcrg JH7110_STGRST_PCIE0_CORE>, - <&stgcrg JH7110_STGRST_PCIE0_APB>; - reset-names = "mst0", "slv0", "slv", "brg", - "core", "apb"; - status = "disabled"; - }; - - pcie1: pcie@2c000000 { - compatible = "starfive,jh7110-pcie"; - reg = <0x0 0x2c000000 0x0 0x1000000 - 0x9 0xc0000000 0x0 0x10000000>; - reg-names = "reg", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0x0 0x38000000 0x0 0x38000000 0x0 0x08000000>, - <0xc3000000 0x9 0x80000000 0x9 0x80000000 0x0 0x40000000>; - interrupts = <57>; - interrupt-parent = <&plic>; - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0x0 0x0 0x0 0x1 &plic 0x1>, - <0x0 0x0 0x0 0x2 &plic 0x2>, - <0x0 0x0 0x0 0x3 &plic 0x3>, - <0x0 0x0 0x0 0x4 &plic 0x4>; - msi-parent = <&plic>; - device_type = "pci"; - starfive,stg-syscon = <&stg_syscon 0x270 0x274 0x2e0 0x368>; - bus-range = <0x0 0xff>; - clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>, - <&stgcrg JH7110_STGCLK_PCIE1_TL>, - <&stgcrg JH7110_STGCLK_PCIE1_AXI>, - <&stgcrg JH7110_STGCLK_PCIE1_APB>; - clock-names = "noc", "tl", "axi", "apb"; - resets = <&stgcrg JH7110_STGRST_PCIE1_MST0>, - <&stgcrg JH7110_STGRST_PCIE1_SLV0>, - <&stgcrg JH7110_STGRST_PCIE1_SLV>, - <&stgcrg JH7110_STGRST_PCIE1_BRG>, - <&stgcrg JH7110_STGRST_PCIE1_CORE>, - <&stgcrg JH7110_STGRST_PCIE1_APB>; - reset-names = "mst0", "slv0", "slv", "brg", - "core", "apb"; - status = "disabled"; - }; - }; -};
JH7110 boards switch to using upstream DT, so drop redundant DT files from arch/riscv/dts/. Signed-off-by: Hal Feng <hal.feng@starfivetech.com> --- arch/riscv/dts/Makefile | 1 - .../dts/jh7110-starfive-visionfive-2.dts | 11 - .../dts/jh7110-starfive-visionfive-2.dtsi | 380 --------- arch/riscv/dts/jh7110.dtsi | 761 ------------------ 4 files changed, 1153 deletions(-) delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2.dts delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2.dtsi delete mode 100644 arch/riscv/dts/jh7110.dtsi