@@ -1457,6 +1457,20 @@ config CMD_MTD_MARKBAD
This is a clone of "nand markbad" command, but for 'mtd' subsystem.
+config CMD_MTD_NAND_WRITE_TEST
+ bool "mtd nand_write_test (destructive)"
+ depends on CMD_MTD
+ help
+ MTD nand_write_test command support.
+
+ Writes blocks of NAND flash with different patterns.
+ This is useful to determine if a block that caused a write error
+ is still good or should be marked as bad.
+
+ This is a clone of "nand torture" command, but for 'mtd' subsystem.
+
+ WARNING: This test will destroy any data on blocks being tested.
+
config CMD_MUX
bool "mux"
depends on MULTIPLEXER
@@ -18,6 +18,7 @@
#include <mtd.h>
#include <dm/devres.h>
#include <linux/err.h>
+#include <memalign.h>
#include <linux/ctype.h>
@@ -742,6 +743,194 @@ out_put_mtd:
}
#endif
+#ifdef CONFIG_CMD_MTD_NAND_WRITE_TEST
+/**
+ * nand_check_pattern:
+ *
+ * Check if buffer contains only a certain byte pattern.
+ *
+ * @param buf buffer to check
+ * @param patt the pattern to check
+ * @param size buffer size in bytes
+ * Return: 1 if there are only patt bytes in buf
+ * 0 if something else was found
+ */
+static int nand_check_pattern(const u_char *buf, u_char patt, int size)
+{
+ int i;
+
+ for (i = 0; i < size; i++)
+ if (buf[i] != patt)
+ return 0;
+ return 1;
+}
+
+/**
+ * nand_write_test:
+ *
+ * Writes a block of NAND flash with different patterns.
+ * This is useful to determine if a block that caused a write error is still
+ * good or should be marked as bad.
+ *
+ * @param mtd nand mtd instance
+ * @param offset offset in flash
+ * Return: 0 if the block is still good
+ */
+static int nand_write_test(struct mtd_info *mtd, loff_t offset)
+{
+ u_char patterns[] = {0xa5, 0x5a, 0x00};
+ struct erase_info instr = {
+ .mtd = mtd,
+ .addr = offset,
+ .len = mtd->erasesize,
+ };
+ size_t retlen;
+ int err, ret = -1, i, patt_count;
+ u_char *buf;
+
+ if ((offset & (mtd->erasesize - 1)) != 0) {
+ puts("Attempt to torture a block at a non block-aligned offset\n");
+ return -EINVAL;
+ }
+
+ if (offset + mtd->erasesize > mtd->size) {
+ puts("Attempt to torture a block outside the flash area\n");
+ return -EINVAL;
+ }
+
+ patt_count = ARRAY_SIZE(patterns);
+
+ buf = malloc_cache_aligned(mtd->erasesize);
+ if (buf == NULL) {
+ puts("Out of memory for erase block buffer\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < patt_count; i++) {
+ err = mtd_erase(mtd, &instr);
+ if (err) {
+ printf("%s: erase() failed for block at 0x%llx: %d\n",
+ mtd->name, instr.addr, err);
+ goto out;
+ }
+
+ /* Make sure the block contains only 0xff bytes */
+ err = mtd_read(mtd, offset, mtd->erasesize, &retlen, buf);
+ if ((err && err != -EUCLEAN) || retlen != mtd->erasesize) {
+ printf("%s: read() failed for block at 0x%llx: %d\n",
+ mtd->name, instr.addr, err);
+ goto out;
+ }
+
+ err = nand_check_pattern(buf, 0xff, mtd->erasesize);
+ if (!err) {
+ printf("Erased block at 0x%llx, but a non-0xff byte was found\n",
+ offset);
+ ret = -EIO;
+ goto out;
+ }
+
+ /* Write a pattern and check it */
+ memset(buf, patterns[i], mtd->erasesize);
+ err = mtd_write(mtd, offset, mtd->erasesize, &retlen, buf);
+ if (err || retlen != mtd->erasesize) {
+ printf("%s: write() failed for block at 0x%llx: %d\n",
+ mtd->name, instr.addr, err);
+ goto out;
+ }
+
+ err = mtd_read(mtd, offset, mtd->erasesize, &retlen, buf);
+ if ((err && err != -EUCLEAN) || retlen != mtd->erasesize) {
+ printf("%s: read() failed for block at 0x%llx: %d\n",
+ mtd->name, instr.addr, err);
+ goto out;
+ }
+
+ err = nand_check_pattern(buf, patterns[i], mtd->erasesize);
+ if (!err) {
+ printf("Pattern 0x%.2x checking failed for block at "
+ "0x%llx\n", patterns[i], offset);
+ ret = -EIO;
+ goto out;
+ }
+ }
+
+ ret = 0;
+
+out:
+ free(buf);
+ return ret;
+}
+
+static int do_nand_write_test(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ struct mtd_info *mtd;
+ loff_t off, len;
+ int ret = 0;
+ unsigned int failed = 0, passed = 0;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ mtd = get_mtd_by_name(argv[1]);
+ if (IS_ERR_OR_NULL(mtd))
+ return CMD_RET_FAILURE;
+
+ if (!mtd_can_have_bb(mtd)) {
+ printf("Only NAND-based devices can be tortured\n");
+ goto out_put_mtd;
+ }
+
+ argc -= 2;
+ argv += 2;
+
+ off = argc > 0 ? hextoul(argv[0], NULL) : 0;
+ len = argc > 1 ? hextoul(argv[1], NULL) : mtd->size;
+
+ if (!mtd_is_aligned_with_block_size(mtd, off)) {
+ printf("Offset not aligned with a block (0x%x)\n",
+ mtd->erasesize);
+ ret = CMD_RET_FAILURE;
+ goto out_put_mtd;
+ }
+
+ if (!mtd_is_aligned_with_block_size(mtd, len)) {
+ printf("Size not a multiple of a block (0x%x)\n",
+ mtd->erasesize);
+ ret = CMD_RET_FAILURE;
+ goto out_put_mtd;
+ }
+
+ printf("\nNAND torture: device '%s' offset 0x%llx size 0x%llx (block size 0x%x)\n",
+ mtd->name, off, len, mtd->erasesize);
+ while (len > 0) {
+ printf("\r block at %llx ", off);
+ if (mtd_block_isbad(mtd, off)) {
+ printf("marked bad, skipping\n");
+ } else {
+ ret = nand_write_test(mtd, off);
+ if (ret) {
+ failed++;
+ printf("failed\n");
+ } else {
+ passed++;
+ }
+ }
+ off += mtd->erasesize;
+ len -= mtd->erasesize;
+ }
+ printf("\n Passed: %u, failed: %u\n", passed, failed);
+ if (failed != 0)
+ ret = CMD_RET_FAILURE;
+
+out_put_mtd:
+ put_mtd_device(mtd);
+
+ return ret;
+}
+#endif
+
static int do_mtd_bad(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])
{
@@ -827,6 +1016,9 @@ U_BOOT_LONGHELP(mtd,
#endif
#ifdef CONFIG_CMD_MTD_MARKBAD
"mtd markbad <name> <off> [<off> ...]\n"
+#endif
+#ifdef CONFIG_CMD_MTD_TORTURE
+ "mtd torture <name> [<off> [<size>]]\n"
#endif
"\n"
"With:\n"
@@ -864,6 +1056,11 @@ U_BOOT_CMD_WITH_SUBCMDS(mtd, "MTD utils", mtd_help_text,
#ifdef CONFIG_CMD_MTD_MARKBAD
U_BOOT_SUBCMD_MKENT_COMPLETE(markbad, 20, 0, do_mtd_markbad,
mtd_name_complete),
+#endif
+#ifdef CONFIG_CMD_MTD_NAND_WRITE_TEST
+ U_BOOT_SUBCMD_MKENT_COMPLETE(nand_write_test, 4, 0,
+ do_nand_write_test,
+ mtd_name_complete),
#endif
U_BOOT_SUBCMD_MKENT_COMPLETE(bad, 2, 1, do_mtd_bad,
mtd_name_complete));
Some nand flashes (like spi-nand one) are registered with mtd subsystem only, thus nand command can't be used to work with such flashes. As result some functionality is missing. This patch implements 'nand torture' functionality for mtd command. Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> --- cmd/Kconfig | 14 ++++ cmd/mtd.c | 197 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 211 insertions(+)