@@ -1449,6 +1449,14 @@ config CMD_MTD_OTP
help
MTD commands for OTP access.
+config CMD_MTD_MARKBAD
+ bool "mtd markbad"
+ depends on CMD_MTD
+ help
+ MTD markbad command support.
+
+ This is a clone of "nand markbad" command, but for 'mtd' subsystem.
+
config CMD_MUX
bool "mux"
depends on MULTIPLEXER
@@ -691,6 +691,57 @@ out_put_mtd:
return ret;
}
+#ifdef CONFIG_CMD_MTD_MARKBAD
+static int do_mtd_markbad(struct cmd_tbl *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ struct mtd_info *mtd;
+ loff_t off;
+ int ret = 0;
+
+ if (argc < 3)
+ return CMD_RET_USAGE;
+
+ mtd = get_mtd_by_name(argv[1]);
+ if (IS_ERR_OR_NULL(mtd))
+ return CMD_RET_FAILURE;
+
+ if (!mtd_can_have_bb(mtd)) {
+ printf("Only NAND-based devices can have bad blocks\n");
+ goto out_put_mtd;
+ }
+
+ argc -= 2;
+ argv += 2;
+ while (argc > 0) {
+ off = hextoul(argv[0], NULL);
+ if (!mtd_is_aligned_with_block_size(mtd, off)) {
+ printf("Offset not aligned with a block (0x%x)\n",
+ mtd->erasesize);
+ ret = CMD_RET_FAILURE;
+ goto out_put_mtd;
+ }
+
+ ret = mtd_block_markbad(mtd, off);
+ if (ret) {
+ printf("block 0x%08llx NOT marked as bad! ERROR %d\n",
+ off, ret);
+ ret = CMD_RET_FAILURE;
+ } else {
+ printf("block 0x%08llx successfully marked as bad\n",
+ off);
+ }
+ --argc;
+ ++argv;
+ }
+
+out_put_mtd:
+ put_mtd_device(mtd);
+
+ return ret;
+}
+#endif
+
static int do_mtd_bad(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])
{
@@ -773,6 +824,9 @@ U_BOOT_LONGHELP(mtd,
"mtd otpwrite <name> <off> <hex string>\n"
"mtd otplock <name> <off> <size>\n"
"mtd otpinfo <name> [u|f]\n"
+#endif
+#ifdef CONFIG_CMD_MTD_MARKBAD
+ "mtd markbad <name> <off> [<off> ...]\n"
#endif
"\n"
"With:\n"
@@ -807,5 +861,9 @@ U_BOOT_CMD_WITH_SUBCMDS(mtd, "MTD utils", mtd_help_text,
mtd_name_complete),
U_BOOT_SUBCMD_MKENT_COMPLETE(erase, 4, 0, do_mtd_erase,
mtd_name_complete),
+#ifdef CONFIG_CMD_MTD_MARKBAD
+ U_BOOT_SUBCMD_MKENT_COMPLETE(markbad, 20, 0, do_mtd_markbad,
+ mtd_name_complete),
+#endif
U_BOOT_SUBCMD_MKENT_COMPLETE(bad, 2, 1, do_mtd_bad,
mtd_name_complete));
Some nand flashes (like spi-nand one) are registered with mtd subsystem only, thus nand command can't be used to work with such flashes. As result some functionality is missing. This patch implements 'nand markbad' functionality for mtd command. Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> --- cmd/Kconfig | 8 ++++++++ cmd/mtd.c | 58 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 66 insertions(+)