@@ -6,6 +6,7 @@
#include <ahci.h>
#include <blk.h>
+#include <clk.h>
#include <cpu_func.h>
#include <dm.h>
#include <dwc_ahsata.h>
@@ -18,9 +19,11 @@
#include <sata.h>
#include <asm/cache.h>
#include <asm/io.h>
+#if IS_ENABLED(CONFIG_ARCH_MX5) || IS_ENABLED(CONFIG_ARCH_MX6)
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/mach-imx/sata.h>
+#endif
#include <linux/bitops.h>
#include <linux/ctype.h>
#include <linux/delay.h>
@@ -115,13 +118,12 @@ static int ahci_setup_oobr(struct ahci_uc_priv *uc_priv, int clk)
return 0;
}
-static int ahci_host_init(struct ahci_uc_priv *uc_priv)
+static int ahci_host_init(struct ahci_uc_priv *uc_priv, int clk)
{
u32 tmp, cap_save, num_ports;
int i, j, timeout = 1000;
struct sata_port_regs *port_mmio = NULL;
struct sata_host_regs *host_mmio = uc_priv->mmio_base;
- int clk = mxc_get_clock(MXC_SATA_CLK);
cap_save = readl(&host_mmio->cap);
cap_save |= SATA_HOST_CAP_SSS;
@@ -909,17 +911,41 @@ int dwc_ahsata_scan(struct udevice *dev)
int dwc_ahsata_probe(struct udevice *dev)
{
struct ahci_uc_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct clk_bulk clk_bulk __maybe_unused;
+ struct clk clk __maybe_unused;
+ int sataclk;
int ret;
-#if defined(CONFIG_MX6)
+#if IS_ENABLED(CONFIG_MX6)
setup_sata();
#endif
+#if IS_ENABLED(CONFIG_MX5) || IS_ENABLED(CONFIG_MX6)
+ sataclk = mxc_get_clock(MXC_SATA_CLK);
+#else
+ ret = clk_get_bulk(dev, &clk_bulk);
+ if (ret)
+ return ret;
+
+ ret = clk_enable_bulk(&clk_bulk);
+ if (ret)
+ return ret;
+
+ ret = clk_get_by_name(dev, "sata", &clk);
+ if (ret)
+ return ret;
+
+ sataclk = clk_get_rate(&clk);
+#endif
+ if (IS_ERR_VALUE(sataclk)) {
+ log_err("Unable to get SATA clock rate\n");
+ return -EINVAL;
+ }
uc_priv->host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | ATA_FLAG_NO_ATAPI;
uc_priv->mmio_base = dev_read_addr_ptr(dev);
/* initialize adapter */
- ret = ahci_host_init(uc_priv);
+ ret = ahci_host_init(uc_priv, sataclk);
if (ret)
return ret;
@@ -961,7 +987,6 @@ U_BOOT_DRIVER(dwc_ahsata_blk) = {
.ops = &dwc_ahsata_blk_ops,
};
-#if CONFIG_IS_ENABLED(DWC_AHSATA_AHCI)
struct ahci_ops dwc_ahsata_ahci_ops = {
.port_status = dwc_ahsata_port_status,
.reset = dwc_ahsata_bus_reset,
@@ -969,7 +994,9 @@ struct ahci_ops dwc_ahsata_ahci_ops = {
};
static const struct udevice_id dwc_ahsata_ahci_ids[] = {
+ { .compatible = "fsl,imx53-ahci" },
{ .compatible = "fsl,imx6q-ahci" },
+ { .compatible = "fsl,imx6qp-ahci" },
{ }
};
@@ -980,4 +1007,3 @@ U_BOOT_DRIVER(dwc_ahsata_ahci) = {
.ops = &dwc_ahsata_ahci_ops,
.probe = dwc_ahsata_probe,
};
-#endif
Remove hard dependencies to arch headers, get clock from clk subsystem if arch clock function is not available, align compatible strings with devicetree binding. No functional change on existing platforms, just get it build on other platforms. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> --- drivers/ata/dwc_ahsata.c | 38 ++++++++++++++++++++++++++++++++------ 1 file changed, 32 insertions(+), 6 deletions(-)