@@ -227,7 +227,8 @@ def test_usb_part(u_boot_console):
lines = output.split('\n')
part_fat = []
- part_ext = []
+ part_ext2 = []
+ part_ext4 = []
for line in lines:
obj = re.search(r'(\d)\s+\d+\s+\d+\s+\w+\d+\w+-\d+\s+(\d+\w+)', line)
if obj:
@@ -239,15 +240,21 @@ def test_usb_part(u_boot_console):
print('Fat detected')
part_fat.append(part_id)
elif part_type == '83':
- print('ext detected')
- part_ext.append(part_id)
+ print('ext(2/4) detected')
+ output = u_boot_console.run_command(
+ 'fstype usb %d:%d' % i, part_id
+ )
+ if 'ext2' in output:
+ part_ext2.append(part_id)
+ elif 'ext4' in output:
+ part_ext4.append(part_id)
else:
pytest.fail('Unsupported Filesystem on device %d' % i)
- devices[i]['ext4'] = part_ext
- devices[i]['ext2'] = part_ext
+ devices[i]['ext4'] = part_ext4
+ devices[i]['ext2'] = part_ext2
devices[i]['fat'] = part_fat
- if not part_ext and not part_fat:
+ if not part_ext2 and not part_ext4 and not part_fat:
pytest.fail('No partition detected on device %d' % i)
return devices, controllers, storage_device
@@ -497,7 +504,7 @@ def test_usb_ext2load(u_boot_console):
for part in partitions:
part_detect = 1
file, size, expected_crc32 = \
- usb_ext4load_ext4write(u_boot_console, 'ext4', x, part)
+ usb_ext4load_ext4write(u_boot_console, fs, x, part)
addr = u_boot_utils.find_ram_base(u_boot_console)
offset = random.randrange(128, 1024, 128)
@@ -526,7 +533,7 @@ def test_usb_ls(u_boot_console):
for x in range(0, int(storage_device)):
if devices[x]['detected'] == 'yes':
u_boot_console.run_command('usb dev %d' % x)
- for fs in ['fat', 'ext4']:
+ for fs in ['fat', 'ext2', 'ext4']:
try:
partitions = devices[x][fs]
except:
@@ -556,7 +563,7 @@ def test_usb_load(u_boot_console):
for x in range(0, int(storage_device)):
if devices[x]['detected'] == 'yes':
u_boot_console.run_command('usb dev %d' % x)
- for fs in ['fat', 'ext4']:
+ for fs in ['fat', 'ext2', 'ext4']:
try:
partitions = devices[x][fs]
except:
@@ -570,7 +577,7 @@ def test_usb_load(u_boot_console):
if fs == 'fat':
file, size, expected_crc32 = \
usb_fatload_fatwrite(u_boot_console, fs, x, part)
- elif fs == 'ext4':
+ elif fs in ['ext4', 'ext2']:
file, size, expected_crc32 = \
usb_ext4load_ext4write(u_boot_console, fs, x, part)
@@ -600,7 +607,7 @@ def test_usb_save(u_boot_console):
for x in range(0, int(storage_device)):
if devices[x]['detected'] == 'yes':
u_boot_console.run_command('usb dev %d' % x)
- for fs in ['fat', 'ext4']:
+ for fs in ['fat', 'ext2', 'ext4']:
try:
partitions = devices[x][fs]
except:
'usb part' command shows the partition maps and shows the partition type by displaying number such as 0c, 83 etc. Observed that ext2 and ext4 partitions shows the same number, i.e, 83, so, using the fstype command to distiniguish between ext2 and ext4 partitions. Signed-off-by: Love Kumar <love.kumar@amd.com> --- test/py/tests/test_usb.py | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-)