Show patches with: State = Action Required       |    Archived = No       |   69 patches
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
Error checking for spi_setup during probe function added to rtc-m41t94 driver Error checking for spi_setup during probe function added to rtc-m41t94 driver - - - - --- 2023-03-03 Nur Hussein New
[1/1] rtc: mediatek: Add mt6685 RTC driver [1/1] rtc: mediatek: Add mt6685 RTC driver - - - - --- 2024-10-31 shunxi zhang New
[1/2] rtc: ab-eoz9: check the lowest voltage threshold first rtc: ab-eoz9: fix the undervoltage handling - 1 - - --- 2024-11-22 Maxime Chevallier New
[1/2] rtc: pcf85363: add support for high-impedance output rtc: pcf85363: add support for high-impedance output - - - - --- 2023-10-25 Javier Carrasco New
[1/3,v3] dt-bindings: abx80x: Add autocal-filter property [1/3,v3] dt-bindings: abx80x: Add autocal-filter property - - - - --- 2020-06-15 Kevin P. Fleming New
[1/5] ARM: multi_v7_defconfig: Add RTC PCF8563 support Merge RTC Haoyu HYM8563 into RTC PCF8563 - - - - --- 2024-11-13 Nobuhiro Iwamatsu New
[1/6] rtc: interface: Fix long-standing race when setting alarm rtc: Fix problems with missing UIE irqs - - - - --- 2024-12-03 Esben Haabendal New
[2/2] dt-bindings: rtc: nxp,pcf8563: add hiz-output property rtc: pcf85363: add support for high-impedance output - - - - --- 2023-10-25 Javier Carrasco New
[2/5] rtc: pcf8563: Add support Haoyu HYM8563 Merge RTC Haoyu HYM8563 into RTC PCF8563 - - - - --- 2024-11-13 Nobuhiro Iwamatsu New
[2/6] rtc: isl12022: Fix initial enable_irq/disable_irq balance rtc: Fix problems with missing UIE irqs - 1 - - --- 2024-12-03 Esben Haabendal New
[3/3,v3] rtc: abx80x: Add support for autocalibration filter capacitor [1/3,v3] dt-bindings: abx80x: Add autocal-filter property - - - - --- 2020-06-15 Kevin P. Fleming New
[3/5] dt-bindings: rtc: pcf8563: Add Haoyu HYM8563 compatibility Merge RTC Haoyu HYM8563 into RTC PCF8563 - - - - --- 2024-11-13 Nobuhiro Iwamatsu New
[3/6] rtc: cpcap: Fix initial enable_irq/disable_irq balance rtc: Fix problems with missing UIE irqs - - - - --- 2024-12-03 Esben Haabendal New
[4/5] rtc: Remove HYM8563 RTC driver Merge RTC Haoyu HYM8563 into RTC PCF8563 - - - - --- 2024-11-13 Nobuhiro Iwamatsu New
[4/6] rtc: st-lpc: Fix initial enable_irq/disable_irq balance rtc: Fix problems with missing UIE irqs - - - - --- 2024-12-03 Esben Haabendal New
[5/5] dt-bindings: rtc: hym8563: Remove hym8563 binding Merge RTC Haoyu HYM8563 into RTC PCF8563 - - - - --- 2024-11-13 Nobuhiro Iwamatsu New
[5/6] rtc: tps6586x: Fix initial enable_irq/disable_irq balance rtc: Fix problems with missing UIE irqs - - - - --- 2024-12-03 Esben Haabendal New
[5/9] rtc: Add Photonicat PMU real-time clock Introduce Photonicat power management MCU driver - - - - --- 2024-09-06 Junhao Xie New
[6/6] rtc: interface: Ensure alarm irq is enabled when UIE is enabled rtc: Fix problems with missing UIE irqs - - - - --- 2024-12-03 Esben Haabendal New
[GIT,PULL] RTC for 6.13 [GIT,PULL] RTC for 6.13 - - - - --- 2024-11-29 Alexandre Belloni New
[RFC] rtc: abx80x: Add attributes to control oscillator switching modes [RFC] rtc: abx80x: Add attributes to control oscillator switching modes - - - - --- 2020-06-16 Kevin P. Fleming New
[RFC] rtc: class: register for late suspend / early resume [RFC] rtc: class: register for late suspend / early resume - - - - --- 2020-06-10 Martin Hundebøll New
[RFC] rtc: proc/sysfs: read actual alarm time from hardware [RFC] rtc: proc/sysfs: read actual alarm time from hardware - - - - --- 2021-01-25 Christoph Fritz New
[RFC] rtc: y2038: remove broken RTC_HCTOSYS workaround [RFC] rtc: y2038: remove broken RTC_HCTOSYS workaround - - - - --- 2022-09-08 Arnd Bergmann New
[V4,1/3] rtc: atcrtc100: Add ATCRTC100 RTC driver rtc: atcrtc100: Add Andes ATCRTC100 RTC driver - - - - --- 2024-11-13 CL Wang New
[V4,2/3] dt-bindings: rtc: Add support for ATCRTC100 RTC rtc: atcrtc100: Add Andes ATCRTC100 RTC driver - - - - --- 2024-11-13 CL Wang New
[V4,RESEND,1/3] rtc: atcrtc100: Add ATCRTC100 RTC driver rtc: atcrtc100: Add Andes ATCRTC100 RTC driver - - - - --- 2024-11-14 CL Wang New
[v1,1/2] rtc: add lockless rtc_update_irq_enable rtc: fix race condition between uie enable and rtc set time - - - - --- 2022-11-09 Yu Liao New
[v1,1/2] rtc: ds1307: set one-minute alarm resolution for rx_8130 Fixes for RX8310 RTC Configuration and rtctest Alarm - - - - --- 2024-06-24 Emanuele Ghidoli New
[v1,2/2] rtc: fix race condition in rtc_set_time() rtc: fix race condition between uie enable and rtc set time - 1 - - --- 2022-11-09 Yu Liao New
[v1,2/2] selftests: rtc: rtctest: skip alarm test if alarm resolution is one minute Fixes for RX8310 RTC Configuration and rtctest Alarm - - - - --- 2024-06-24 Emanuele Ghidoli New
[v2,7/7] rtc: Add Nuvoton NCT6694 RTC support Add Nuvoton NCT6694 MFD drivers - - - - --- 2024-11-21 Ming Yu New
[v2] rtc: bd70528: disable wakeup in the error path of .probe() [v2] rtc: bd70528: disable wakeup in the error path of .probe() - 1 - - --- 2024-12-12 Joe Hattori New
[v2] rtc: loongson: clear TOY_MATCH0_REG in loongson_rtc_isr() [v2] rtc: loongson: clear TOY_MATCH0_REG in loongson_rtc_isr() - 1 2 1 --- 2024-12-05 Ming Wang New
[v3,1/3] rtc: m41t80: probe: use IS_ENABLED for CONFIG_OF rtc: Set M41T82 & M41T83 xtal load capacitance from DT - - - - --- 2023-01-19 Dennis Lambe New
[v3,1/5] rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm x1e80100 RTC support - - 1 - --- 2024-10-15 Jonathan Marek New
[v3,1/7] mfd: Add core driver for Nuvoton NCT6694 Add Nuvoton NCT6694 MFD drivers - - - - --- 2024-12-10 Ming Yu New
[v3,2/3] dt-bindings: m41t80: add xtal load capacitance rtc: Set M41T82 & M41T83 xtal load capacitance from DT - - 1 - --- 2023-01-19 Dennis Lambe New
[v3,2/5] dt-bindings: rtc: qcom-pm8xxx: document qcom,no-alarm flag x1e80100 RTC support - - 1 - --- 2024-10-15 Jonathan Marek New
[v3,2/7] gpio: Add Nuvoton NCT6694 GPIO support Add Nuvoton NCT6694 MFD drivers - - - - --- 2024-12-10 Ming Yu New
[v3,3/3] rtc: m41t80: set xtal load capacitance from DT rtc: Set M41T82 & M41T83 xtal load capacitance from DT - - - - --- 2023-01-19 Dennis Lambe New
[v3,3/7] i2c: Add Nuvoton NCT6694 I2C support Add Nuvoton NCT6694 MFD drivers - - - - --- 2024-12-10 Ming Yu New
[v3,4/7] can: Add Nuvoton NCT6694 CAN support Add Nuvoton NCT6694 MFD drivers - - - - --- 2024-12-10 Ming Yu New
[v3,5/7] watchdog: Add Nuvoton NCT6694 WDT support Add Nuvoton NCT6694 MFD drivers - - - - --- 2024-12-10 Ming Yu New
[v3,6/7] hwmon: Add Nuvoton NCT6694 HWMON support Add Nuvoton NCT6694 MFD drivers - - - - --- 2024-12-10 Ming Yu New
[v3,7/7] rtc: Add Nuvoton NCT6694 RTC support Add Nuvoton NCT6694 MFD drivers - - - - --- 2024-12-10 Ming Yu New
[v3] rtc: abx80x: Don't warn about oscillator failure after PoR [v3] rtc: abx80x: Don't warn about oscillator failure after PoR - - - - --- 2023-10-19 Sean Anderson New
[v3] rtc: bd70528: enable the device's wakeup in the last step of .probe() [v3] rtc: bd70528: enable the device's wakeup in the last step of .probe() - 1 - - --- 2024-12-12 Joe Hattori New
[v4,1/1] drivers/rtc: rtc-sun6i: AutoCal Internal OSC [v4,1/1] drivers/rtc: rtc-sun6i: AutoCal Internal OSC - - - - --- 2024-05-22 Alois Fertl New
rtc: Add check for clk_enable() rtc: Add check for clk_enable() - 1 - - --- 2024-12-06 Mingwei Zheng New
rtc: RTC_DRV_SPEAR should not default to y when compile-testing rtc: RTC_DRV_SPEAR should not default to y when compile-testing 1 - - - --- 2024-12-03 Geert Uytterhoeven New
rtc: ab-eoz9: disable wakeup in the error path rtc: ab-eoz9: disable wakeup in the error path - 1 - - --- 2024-11-26 Joe Hattori New
rtc: bd70528: disable wakeup in the error path of .probe() rtc: bd70528: disable wakeup in the error path of .probe() - 1 - - --- 2024-12-12 Joe Hattori New
rtc: brcmstb-waketimer: disable wakeup in .remove() and in the error path of .probe() rtc: brcmstb-waketimer: disable wakeup in .remove() and in the error path of .probe() - 1 - - --- 2024-12-12 Joe Hattori New
rtc: cpcap: enable the device's wakeup in the last step of .probe() rtc: cpcap: enable the device's wakeup in the last step of .probe() - 1 - - --- 2024-12-12 Joe Hattori New
rtc: cros-ec: disable wakeup in the error path of .probe() rtc: cros-ec: disable wakeup in the error path of .probe() - 1 - - --- 2024-12-12 Joe Hattori New
rtc: ds1307: Simplify probe() rtc: ds1307: Simplify probe() - - - - --- 2023-08-28 Biju Das New
rtc: ds1307: implement suspend/resume function rtc: ds1307: implement suspend/resume function - - - - --- 2022-03-07 Alifer Moraes New
rtc: loongson: clear TOY_MATCH0_REG in loongson_rtc_isr rtc: loongson: clear TOY_MATCH0_REG in loongson_rtc_isr - 1 - - --- 2024-11-28 Ming Wang New
rtc: m41t80: Simplify probe() rtc: m41t80: Simplify probe() - - - - --- 2023-08-28 Biju Das New
rtc: pcf2127: Simplify probe() rtc: pcf2127: Simplify probe() - - - - --- 2023-08-28 Biju Das New
rtc: pcf8523: report battery switch over rtc: pcf8523: report battery switch over - - - - --- 2021-12-13 Baruch Siach New
rtc: rs5c372: Simplify probe() rtc: rs5c372: Simplify probe() - - - - --- 2023-08-28 Biju Das New
rtc: rtc-as3722: disable wakeup on error path of .probe() rtc: rtc-as3722: disable wakeup on error path of .probe() - 1 - - --- 2024-12-07 Joe Hattori New
rtc: rtc-at91sam9: disable wakeup in .remove() and the error path of .probe() rtc: rtc-at91sam9: disable wakeup in .remove() and the error path of .probe() - 1 - - --- 2024-12-09 Joe Hattori New
rtc: rv8803: Simplify probe() rtc: rv8803: Simplify probe() - - - - --- 2023-08-28 Biju Das New
rtc: rx8581: Simplify probe() rtc: rx8581: Simplify probe() - - - - --- 2023-08-28 Biju Das New
rtc: tps6594: Fix integer overflow on 32bit systems rtc: tps6594: Fix integer overflow on 32bit systems - 1 - - --- 2024-12-11 Dan Carpenter New
rtc: zynqmp: Fix optional clock name property rtc: zynqmp: Fix optional clock name property - 1 - - --- 2024-11-27 Michal Simek New