@@ -1015,60 +1015,47 @@ static abi_ulong setup_arg_pages(abi_ulong p, struct linux_binprm *bprm,
return p;
}
-static void set_brk(abi_ulong start, abi_ulong end)
-{
- /* page-align the start and end addresses... */
- start = HOST_PAGE_ALIGN(start);
- end = HOST_PAGE_ALIGN(end);
- if (end <= start)
- return;
- if(target_mmap(start, end - start,
- PROT_READ | PROT_WRITE | PROT_EXEC,
- MAP_FIXED | MAP_PRIVATE | MAP_ANONYMOUS, -1, 0) == -1) {
- perror("cannot mmap brk");
- exit(-1);
- }
-}
-
-
-/* We need to explicitly zero any fractional pages after the data
- section (i.e. bss). This would contain the junk from the file that
- should not be in memory. */
-static void padzero(abi_ulong elf_bss, abi_ulong last_bss)
-{
- abi_ulong nbyte;
-
- if (elf_bss >= last_bss)
- return;
-
- /* XXX: this is really a hack : if the real host page size is
- smaller than the target page size, some pages after the end
- of the file may not be mapped. A better fix would be to
- patch target_mmap(), but it is more complicated as the file
- size must be known */
- if (qemu_real_host_page_size < qemu_host_page_size) {
- abi_ulong end_addr, end_addr1;
- end_addr1 = (elf_bss + qemu_real_host_page_size - 1) &
- ~(qemu_real_host_page_size - 1);
- end_addr = HOST_PAGE_ALIGN(elf_bss);
- if (end_addr1 < end_addr) {
- mmap((void *)g2h(end_addr1), end_addr - end_addr1,
- PROT_READ|PROT_WRITE|PROT_EXEC,
- MAP_FIXED|MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
- }
+/* Map and zero the bss. We need to explicitly zero any fractional pages
+ after the data section (i.e. bss). */
+static void zero_bss(abi_ulong elf_bss, abi_ulong last_bss, int prot)
+{
+ uintptr_t host_start, host_map_start, host_end;
+
+ last_bss = TARGET_PAGE_ALIGN(last_bss);
+
+ /* ??? There is confusion between qemu_real_host_page_size and
+ qemu_host_page_size here and elsewhere in target_mmap, which
+ may lead to the end of the data section mapping from the file
+ not being mapped. At least there was an explicit test and
+ comment for that here, suggesting that "the file size must
+ be known". The comment probably pre-dates the introduction
+ of the fstat system call in target_mmap which does in fact
+ find out the size. What isn't clear is if the workaround
+ here is still actually needed. For now, continue with it,
+ but merge it with the "normal" mmap that would allocate the bss. */
+
+ host_start = (uintptr_t) g2h(elf_bss);
+ host_end = (uintptr_t) g2h(last_bss);
+ host_map_start = (host_start + qemu_real_host_page_size - 1);
+ host_map_start &= -qemu_real_host_page_size;
+
+ if (host_map_start < host_end) {
+ void *p = mmap((void *)host_map_start, host_end - host_map_start,
+ prot, MAP_FIXED | MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+ if (p == MAP_FAILED) {
+ perror("cannot mmap brk");
+ exit(-1);
}
- nbyte = elf_bss & (qemu_host_page_size-1);
- if (nbyte) {
- nbyte = qemu_host_page_size - nbyte;
- do {
- /* FIXME - what to do if put_user() fails? */
- put_user_u8(0, elf_bss);
- elf_bss++;
- } while (--nbyte);
- }
-}
+ /* Since we didn't use target_mmap, make sure to record
+ the validity of the pages with qemu. */
+ page_set_flags(elf_bss & TARGET_PAGE_MASK, last_bss, prot|PAGE_VALID);
+ }
+ if (host_start < host_map_start) {
+ memset((void *)host_start, 0, host_map_start - host_start);
+ }
+}
static abi_ulong create_elf_tables(abi_ulong p, int argc, int envc,
struct elfhdr * exec,
@@ -1160,12 +1147,9 @@ static abi_ulong load_elf_interp(struct elfhdr * interp_elf_ex,
abi_ulong load_addr = 0;
int load_addr_set = 0;
int retval;
- abi_ulong last_bss, elf_bss;
abi_ulong error;
int i;
- elf_bss = 0;
- last_bss = 0;
error = 0;
#ifdef BSWAP_NEEDED
@@ -1238,7 +1222,6 @@ static abi_ulong load_elf_interp(struct elfhdr * interp_elf_ex,
int elf_type = MAP_PRIVATE | MAP_DENYWRITE;
int elf_prot = 0;
abi_ulong vaddr = 0;
- abi_ulong k;
if (eppnt->p_flags & PF_R) elf_prot = PROT_READ;
if (eppnt->p_flags & PF_W) elf_prot |= PROT_WRITE;
@@ -1266,40 +1249,17 @@ static abi_ulong load_elf_interp(struct elfhdr * interp_elf_ex,
load_addr_set = 1;
}
- /*
- * Find the end of the file mapping for this phdr, and keep
- * track of the largest address we see for this.
- */
- k = load_addr + eppnt->p_vaddr + eppnt->p_filesz;
- if (k > elf_bss) elf_bss = k;
-
- /*
- * Do the same thing for the memory mapping - between
- * elf_bss and last_bss is the bss section.
- */
- k = load_addr + eppnt->p_memsz + eppnt->p_vaddr;
- if (k > last_bss) last_bss = k;
+ /* If the load segment requests extra zeros (e.g. bss), map it. */
+ if (eppnt->p_filesz < eppnt->p_memsz) {
+ abi_ulong base = load_addr + eppnt->p_vaddr;
+ zero_bss(base + eppnt->p_filesz,
+ base + eppnt->p_memsz, elf_prot);
+ }
}
/* Now use mmap to map the library into memory. */
close(interpreter_fd);
-
- /*
- * Now fill out the bss section. First pad the last page up
- * to the page boundary, and then perform a mmap to make sure
- * that there are zeromapped pages up to and including the last
- * bss page.
- */
- padzero(elf_bss, last_bss);
- elf_bss = TARGET_ELF_PAGESTART(elf_bss + qemu_host_page_size - 1); /* What we have mapped so far */
-
- /* Map the last of the bss segment */
- if (last_bss > elf_bss) {
- target_mmap(elf_bss, last_bss-elf_bss,
- PROT_READ|PROT_WRITE|PROT_EXEC,
- MAP_FIXED|MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
- }
free(elf_phdata);
*interp_load_addr = load_addr;
@@ -1453,7 +1413,7 @@ int load_elf_binary(struct linux_binprm * bprm, struct target_pt_regs * regs,
abi_ulong mapped_addr;
struct elf_phdr * elf_ppnt;
struct elf_phdr *elf_phdata;
- abi_ulong elf_bss, k, elf_brk;
+ abi_ulong k, elf_brk;
int retval;
char * elf_interpreter;
abi_ulong elf_entry, interp_load_addr = 0;
@@ -1512,10 +1472,8 @@ int load_elf_binary(struct linux_binprm * bprm, struct target_pt_regs * regs,
#endif
elf_ppnt = elf_phdata;
- elf_bss = 0;
elf_brk = 0;
-
elf_stack = ~((abi_ulong)0UL);
elf_interpreter = NULL;
start_code = ~((abi_ulong)0UL);
@@ -1758,18 +1716,24 @@ int load_elf_binary(struct linux_binprm * bprm, struct target_pt_regs * regs,
if (start_data < k)
start_data = k;
k = elf_ppnt->p_vaddr + elf_ppnt->p_filesz;
- if (k > elf_bss)
- elf_bss = k;
if ((elf_ppnt->p_flags & PF_X) && end_code < k)
end_code = k;
if (end_data < k)
end_data = k;
k = elf_ppnt->p_vaddr + elf_ppnt->p_memsz;
- if (k > elf_brk) elf_brk = k;
+ if (k > elf_brk) {
+ elf_brk = TARGET_PAGE_ALIGN(k);
+ }
+
+ /* If the load segment requests extra zeros (e.g. bss), map it. */
+ if (elf_ppnt->p_filesz < elf_ppnt->p_memsz) {
+ abi_ulong base = load_bias + elf_ppnt->p_vaddr;
+ zero_bss(base + elf_ppnt->p_filesz,
+ base + elf_ppnt->p_memsz, elf_prot);
+ }
}
elf_entry += load_bias;
- elf_bss += load_bias;
elf_brk += load_bias;
start_code += load_bias;
end_code += load_bias;
@@ -1824,12 +1788,6 @@ int load_elf_binary(struct linux_binprm * bprm, struct target_pt_regs * regs,
info->end_data = end_data;
info->start_stack = bprm->p;
- /* Calling set_brk effectively mmaps the pages that we need for the bss and break
- sections */
- set_brk(elf_bss, elf_brk);
-
- padzero(elf_bss, elf_brk);
-
#if 0
printf("(start_brk) %x\n" , info->start_brk);
printf("(end_code) %x\n" , info->end_code);
I caught padzero not properly initializing the .bss segment on a statically linked Alpha program. Rather than a minimal patch, replace the gross code with a single mmap+memset. Share more code between load_elf_interp and load_elf_binary. Legally, an ELF program need not have just a single .bss; and PT_LOAD segment can have memsz > filesz. Signed-off-by: Richard Henderson <rth@twiddle.net> --- linux-user/elfload.c | 150 ++++++++++++++++++-------------------------------- 1 files changed, 54 insertions(+), 96 deletions(-)