Message ID | bd1f8a8f6bb05eb6cc5826a0883c5e0318cfffca.1424912878.git.zhugh.fnst@cn.fujitsu.com |
---|---|
State | New |
Headers | show |
On Thu, Feb 26, 2015 at 09:16:52AM +0800, Zhu Guihua wrote: > From: Tang Chen <tangchen@cn.fujitsu.com> > > This patch adds a new bit to memory hotplug IO port indicating that > ej0 has been evaluated by guest OS. And call pc-dimm unplug cb to do > the real removal. > > Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> > Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> > Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> so previous patch adds _EJ0 but no real hardware to back it up. It's bad for bisect and is not making review easier. > --- > docs/specs/acpi_mem_hotplug.txt | 11 +++++++++-- > hw/acpi/memory_hotplug.c | 24 ++++++++++++++++++++++-- > hw/i386/acpi-dsdt-mem-hotplug.dsl | 11 ++++++++++- > include/hw/acpi/pc-hotplug.h | 1 + > trace-events | 1 + > 5 files changed, 43 insertions(+), 5 deletions(-) > > diff --git a/docs/specs/acpi_mem_hotplug.txt b/docs/specs/acpi_mem_hotplug.txt > index 1290994..85cd4b8 100644 > --- a/docs/specs/acpi_mem_hotplug.txt > +++ b/docs/specs/acpi_mem_hotplug.txt > @@ -19,7 +19,9 @@ Memory hot-plug interface (IO port 0xa00-0xa17, 1-4 byte access): > 1: Device insert event, used to distinguish device for which > no device check event to OSPM was issued. > It's valid only when bit 1 is set. > - 2-7: reserved and should be ignored by OSPM > + 2: Device remove event, used to distinguish device for which > + no device check event to OSPM was issued. > + 3-7: reserved and should be ignored by OSPM > [0x15-0x17] reserved > > write access: > @@ -35,7 +37,12 @@ Memory hot-plug interface (IO port 0xa00-0xa17, 1-4 byte access): > 1: if set to 1 clears device insert event, set by OSPM > after it has emitted device check event for the > selected memory device > - 2-7: reserved, OSPM must clear them before writing to register > + 2: if set to 1 clears device remove event, set by OSPM > + after it has emitted device check event for the > + selected memory device. if guest fails to eject device, it > + should send OST event about it and forget about device > + removal. > + 3-7: reserved, OSPM must clear them before writing to register > > Selecting memory device slot beyond present range has no effect on platform: > - write accesses to memory hot-plug registers not documented above are > diff --git a/hw/acpi/memory_hotplug.c b/hw/acpi/memory_hotplug.c > index ffacecf..64c7b33 100644 > --- a/hw/acpi/memory_hotplug.c > +++ b/hw/acpi/memory_hotplug.c > @@ -2,6 +2,7 @@ > #include "hw/acpi/pc-hotplug.h" > #include "hw/mem/pc-dimm.h" > #include "hw/boards.h" > +#include "hw/qdev-core.h" > #include "trace.h" > #include "qapi-event.h" > > @@ -75,6 +76,7 @@ static uint64_t acpi_memory_hotplug_read(void *opaque, hwaddr addr, > case 0x14: /* pack and return is_* fields */ > val |= mdev->is_enabled ? 1 : 0; > val |= mdev->is_inserting ? 2 : 0; > + val |= mdev->is_removing ? 4 : 0; > trace_mhp_acpi_read_flags(mem_st->selector, val); > break; > default: > @@ -90,6 +92,8 @@ static void acpi_memory_hotplug_write(void *opaque, hwaddr addr, uint64_t data, > MemHotplugState *mem_st = opaque; > MemStatus *mdev; > ACPIOSTInfo *info; > + DeviceState *dev = NULL; > + HotplugHandler *hotplug_ctrl = NULL; > > if (!mem_st->dev_count) { > return; > @@ -121,18 +125,34 @@ static void acpi_memory_hotplug_write(void *opaque, hwaddr addr, uint64_t data, > mdev = &mem_st->devs[mem_st->selector]; > mdev->ost_status = data; > trace_mhp_acpi_write_ost_status(mem_st->selector, mdev->ost_status); > - /* TODO: implement memory removal on guest signal */ > > info = acpi_memory_device_status(mem_st->selector, mdev); > qapi_event_send_acpi_device_ost(info, &error_abort); > qapi_free_ACPIOSTInfo(info); > break; > - case 0x14: > + case 0x14: /* set is_* fields */ > mdev = &mem_st->devs[mem_st->selector]; > + > if (data & 2) { /* clear insert event */ > mdev->is_inserting = false; > trace_mhp_acpi_clear_insert_evt(mem_st->selector); > + } else if (data & 4) { /* request removal of device */ > + mdev->is_removing = false; > + trace_mhp_acpi_clear_remove_evt(mem_st->selector); > + /* > + * QEMU memory hot unplug is an asynchronous procedure. QEMU first > + * calls pc-dimm unplug request cb to send a SCI to guest. When the > + * Guest OS finished handling the SCI, it evaluates ACPI EJ0, and > + * QEMU calls pc-dimm unplug cb to remove memory device. > + */ > + dev = DEVICE(mdev->dimm); > + hotplug_ctrl = qdev_get_hotplug_handler(dev); > + /* Call pc-dimm unplug cb. */ > + hotplug_handler_unplug(hotplug_ctrl, dev, NULL); > } > + > + break; > + default: > break; > } > > diff --git a/hw/i386/acpi-dsdt-mem-hotplug.dsl b/hw/i386/acpi-dsdt-mem-hotplug.dsl > index 2a36c47..b53bf77 100644 > --- a/hw/i386/acpi-dsdt-mem-hotplug.dsl > +++ b/hw/i386/acpi-dsdt-mem-hotplug.dsl > @@ -50,6 +50,7 @@ > Offset(20), > MEMORY_SLOT_ENABLED, 1, // 1 if enabled, read only > MEMORY_SLOT_INSERT_EVENT, 1, // (read) 1 if has a insert event. (write) 1 to clear event > + MEMORY_SLOT_REMOVE_EVENT, 1, // (read) 1 if has a remove event. (write) 1 to clear event > } > > Mutex (MEMORY_SLOT_LOCK, 0) > @@ -71,8 +72,9 @@ > If (LEqual(MEMORY_SLOT_INSERT_EVENT, One)) { // Memory device needs check > MEMORY_SLOT_NOTIFY_METHOD(Local0, 1) > Store(1, MEMORY_SLOT_INSERT_EVENT) > + } Elseif (LEqual(MEMORY_SLOT_REMOVE_EVENT, One)) { // Ejection request > + MEMORY_SLOT_NOTIFY_METHOD(Local0, 3) > } > - // TODO: handle memory eject request > Add(Local0, One, Local0) // goto next DIMM > } > Release(MEMORY_SLOT_LOCK) > @@ -172,5 +174,12 @@ > Store(Arg2, MEMORY_SLOT_OST_STATUS) > Release(MEMORY_SLOT_LOCK) > } > + > + Method(MEMORY_SLOT_EJECT_METHOD, 2) { > + Acquire(MEMORY_SLOT_LOCK, 0xFFFF) > + Store(ToInteger(Arg0), MEMORY_SLOT_SLECTOR) // select DIMM > + Store(One, MEMORY_SLOT_REMOVE_EVENT) > + Release(MEMORY_SLOT_LOCK) > + } > } // Device() > } // Scope() > diff --git a/include/hw/acpi/pc-hotplug.h b/include/hw/acpi/pc-hotplug.h > index ae30ff1..b61b6ea 100644 > --- a/include/hw/acpi/pc-hotplug.h > +++ b/include/hw/acpi/pc-hotplug.h > @@ -42,6 +42,7 @@ > #define MEMORY_SLOT_PROXIMITY MPX > #define MEMORY_SLOT_ENABLED MES > #define MEMORY_SLOT_INSERT_EVENT MINS > +#define MEMORY_SLOT_REMOVE_EVENT MRMV > #define MEMORY_SLOT_SLECTOR MSEL > #define MEMORY_SLOT_OST_EVENT MOEV > #define MEMORY_SLOT_OST_STATUS MOSC > diff --git a/trace-events b/trace-events > index f87b077..4439f45 100644 > --- a/trace-events > +++ b/trace-events > @@ -1568,6 +1568,7 @@ mhp_acpi_write_slot(uint32_t slot) "set active slot: 0x%"PRIx32 > mhp_acpi_write_ost_ev(uint32_t slot, uint32_t ev) "slot[0x%"PRIx32"] OST EVENT: 0x%"PRIx32 > mhp_acpi_write_ost_status(uint32_t slot, uint32_t st) "slot[0x%"PRIx32"] OST STATUS: 0x%"PRIx32 > mhp_acpi_clear_insert_evt(uint32_t slot) "slot[0x%"PRIx32"] clear insert event" > +mhp_acpi_clear_remove_evt(uint32_t slot) "slot[0x%"PRIx32"] clear remove event" > > # hw/i386/pc.c > mhp_pc_dimm_assigned_slot(int slot) "0x%d" > -- > 1.9.3
diff --git a/docs/specs/acpi_mem_hotplug.txt b/docs/specs/acpi_mem_hotplug.txt index 1290994..85cd4b8 100644 --- a/docs/specs/acpi_mem_hotplug.txt +++ b/docs/specs/acpi_mem_hotplug.txt @@ -19,7 +19,9 @@ Memory hot-plug interface (IO port 0xa00-0xa17, 1-4 byte access): 1: Device insert event, used to distinguish device for which no device check event to OSPM was issued. It's valid only when bit 1 is set. - 2-7: reserved and should be ignored by OSPM + 2: Device remove event, used to distinguish device for which + no device check event to OSPM was issued. + 3-7: reserved and should be ignored by OSPM [0x15-0x17] reserved write access: @@ -35,7 +37,12 @@ Memory hot-plug interface (IO port 0xa00-0xa17, 1-4 byte access): 1: if set to 1 clears device insert event, set by OSPM after it has emitted device check event for the selected memory device - 2-7: reserved, OSPM must clear them before writing to register + 2: if set to 1 clears device remove event, set by OSPM + after it has emitted device check event for the + selected memory device. if guest fails to eject device, it + should send OST event about it and forget about device + removal. + 3-7: reserved, OSPM must clear them before writing to register Selecting memory device slot beyond present range has no effect on platform: - write accesses to memory hot-plug registers not documented above are diff --git a/hw/acpi/memory_hotplug.c b/hw/acpi/memory_hotplug.c index ffacecf..64c7b33 100644 --- a/hw/acpi/memory_hotplug.c +++ b/hw/acpi/memory_hotplug.c @@ -2,6 +2,7 @@ #include "hw/acpi/pc-hotplug.h" #include "hw/mem/pc-dimm.h" #include "hw/boards.h" +#include "hw/qdev-core.h" #include "trace.h" #include "qapi-event.h" @@ -75,6 +76,7 @@ static uint64_t acpi_memory_hotplug_read(void *opaque, hwaddr addr, case 0x14: /* pack and return is_* fields */ val |= mdev->is_enabled ? 1 : 0; val |= mdev->is_inserting ? 2 : 0; + val |= mdev->is_removing ? 4 : 0; trace_mhp_acpi_read_flags(mem_st->selector, val); break; default: @@ -90,6 +92,8 @@ static void acpi_memory_hotplug_write(void *opaque, hwaddr addr, uint64_t data, MemHotplugState *mem_st = opaque; MemStatus *mdev; ACPIOSTInfo *info; + DeviceState *dev = NULL; + HotplugHandler *hotplug_ctrl = NULL; if (!mem_st->dev_count) { return; @@ -121,18 +125,34 @@ static void acpi_memory_hotplug_write(void *opaque, hwaddr addr, uint64_t data, mdev = &mem_st->devs[mem_st->selector]; mdev->ost_status = data; trace_mhp_acpi_write_ost_status(mem_st->selector, mdev->ost_status); - /* TODO: implement memory removal on guest signal */ info = acpi_memory_device_status(mem_st->selector, mdev); qapi_event_send_acpi_device_ost(info, &error_abort); qapi_free_ACPIOSTInfo(info); break; - case 0x14: + case 0x14: /* set is_* fields */ mdev = &mem_st->devs[mem_st->selector]; + if (data & 2) { /* clear insert event */ mdev->is_inserting = false; trace_mhp_acpi_clear_insert_evt(mem_st->selector); + } else if (data & 4) { /* request removal of device */ + mdev->is_removing = false; + trace_mhp_acpi_clear_remove_evt(mem_st->selector); + /* + * QEMU memory hot unplug is an asynchronous procedure. QEMU first + * calls pc-dimm unplug request cb to send a SCI to guest. When the + * Guest OS finished handling the SCI, it evaluates ACPI EJ0, and + * QEMU calls pc-dimm unplug cb to remove memory device. + */ + dev = DEVICE(mdev->dimm); + hotplug_ctrl = qdev_get_hotplug_handler(dev); + /* Call pc-dimm unplug cb. */ + hotplug_handler_unplug(hotplug_ctrl, dev, NULL); } + + break; + default: break; } diff --git a/hw/i386/acpi-dsdt-mem-hotplug.dsl b/hw/i386/acpi-dsdt-mem-hotplug.dsl index 2a36c47..b53bf77 100644 --- a/hw/i386/acpi-dsdt-mem-hotplug.dsl +++ b/hw/i386/acpi-dsdt-mem-hotplug.dsl @@ -50,6 +50,7 @@ Offset(20), MEMORY_SLOT_ENABLED, 1, // 1 if enabled, read only MEMORY_SLOT_INSERT_EVENT, 1, // (read) 1 if has a insert event. (write) 1 to clear event + MEMORY_SLOT_REMOVE_EVENT, 1, // (read) 1 if has a remove event. (write) 1 to clear event } Mutex (MEMORY_SLOT_LOCK, 0) @@ -71,8 +72,9 @@ If (LEqual(MEMORY_SLOT_INSERT_EVENT, One)) { // Memory device needs check MEMORY_SLOT_NOTIFY_METHOD(Local0, 1) Store(1, MEMORY_SLOT_INSERT_EVENT) + } Elseif (LEqual(MEMORY_SLOT_REMOVE_EVENT, One)) { // Ejection request + MEMORY_SLOT_NOTIFY_METHOD(Local0, 3) } - // TODO: handle memory eject request Add(Local0, One, Local0) // goto next DIMM } Release(MEMORY_SLOT_LOCK) @@ -172,5 +174,12 @@ Store(Arg2, MEMORY_SLOT_OST_STATUS) Release(MEMORY_SLOT_LOCK) } + + Method(MEMORY_SLOT_EJECT_METHOD, 2) { + Acquire(MEMORY_SLOT_LOCK, 0xFFFF) + Store(ToInteger(Arg0), MEMORY_SLOT_SLECTOR) // select DIMM + Store(One, MEMORY_SLOT_REMOVE_EVENT) + Release(MEMORY_SLOT_LOCK) + } } // Device() } // Scope() diff --git a/include/hw/acpi/pc-hotplug.h b/include/hw/acpi/pc-hotplug.h index ae30ff1..b61b6ea 100644 --- a/include/hw/acpi/pc-hotplug.h +++ b/include/hw/acpi/pc-hotplug.h @@ -42,6 +42,7 @@ #define MEMORY_SLOT_PROXIMITY MPX #define MEMORY_SLOT_ENABLED MES #define MEMORY_SLOT_INSERT_EVENT MINS +#define MEMORY_SLOT_REMOVE_EVENT MRMV #define MEMORY_SLOT_SLECTOR MSEL #define MEMORY_SLOT_OST_EVENT MOEV #define MEMORY_SLOT_OST_STATUS MOSC diff --git a/trace-events b/trace-events index f87b077..4439f45 100644 --- a/trace-events +++ b/trace-events @@ -1568,6 +1568,7 @@ mhp_acpi_write_slot(uint32_t slot) "set active slot: 0x%"PRIx32 mhp_acpi_write_ost_ev(uint32_t slot, uint32_t ev) "slot[0x%"PRIx32"] OST EVENT: 0x%"PRIx32 mhp_acpi_write_ost_status(uint32_t slot, uint32_t st) "slot[0x%"PRIx32"] OST STATUS: 0x%"PRIx32 mhp_acpi_clear_insert_evt(uint32_t slot) "slot[0x%"PRIx32"] clear insert event" +mhp_acpi_clear_remove_evt(uint32_t slot) "slot[0x%"PRIx32"] clear remove event" # hw/i386/pc.c mhp_pc_dimm_assigned_slot(int slot) "0x%d"