diff mbox

[3/4,v3] vmware_vga: Return a value for FB_SIZE before the device is enabled

Message ID alpine.GSO.2.00.1210062034240.13558@mono
State New
Headers show

Commit Message

BALATON Zoltan Oct. 6, 2012, 6:35 p.m. UTC 
According to the documentation drivers using this device should read
FB_SIZE before enabling the device to know what memory to map. This
would not work if we return 0 before enabled. The docs also mention
reading SVGA_REG_DEPTH but not writing it. (Only SVGA_REG_BITS_PER_PIXEL
can be written but we don't really support that either.)

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
---
  hw/vmware_vga.c |   19 +++++++++----------
  1 file changed, 9 insertions(+), 10 deletions(-)

  v3: Changes to address comments from Paolo Bonzini (Thanks for the review!)
diff mbox

Patch

diff --git a/hw/vmware_vga.c b/hw/vmware_vga.c
index c5a8909..c3ef924 100644
--- a/hw/vmware_vga.c
+++ b/hw/vmware_vga.c
@@ -32,13 +32,14 @@ 
  #define HW_FILL_ACCEL
  #define HW_MOUSE_ACCEL

-# include "vga_int.h"
+#include "vga_int.h"
+
+/* See http://vmware-svga.sf.net/ for some documentation on VMWare SVGA */

  struct vmsvga_state_s {
      VGACommonState vga;

      int invalidated;
-    int depth;
      int enable;
      int config;
      struct {
@@ -56,7 +57,6 @@  struct vmsvga_state_s {
      uint32_t guest;
      uint32_t svgaid;
      int syncing;
-    int fb_size;

      MemoryRegion fifo_ram;
      uint8_t *fifo_ptr;
@@ -759,10 +759,10 @@  static uint32_t vmsvga_value_read(void *opaque, uint32_t address)
          return 0x0;

      case SVGA_REG_VRAM_SIZE:
-        return s->vga.vram_size;
+        return s->vga.vram_size; /* No physical VRAM besides the framebuffer */

      case SVGA_REG_FB_SIZE:
-        return s->fb_size;
+        return s->vga.vram_size;

      case SVGA_REG_CAPABILITIES:
          caps = SVGA_CAP_NONE;
@@ -851,7 +851,6 @@  static void vmsvga_value_write(void *opaque, uint32_t address, uint32_t value)
          s->invalidated = 1;
          s->vga.invalidate(&s->vga);
          if (s->enable) {
-            s->fb_size = ((s->depth + 7) >> 3) * s->new_width * s->new_height;
              vga_dirty_log_stop(&s->vga);
          } else {
              vga_dirty_log_start(&s->vga);
@@ -876,10 +875,9 @@  static void vmsvga_value_write(void *opaque, uint32_t address, uint32_t value)
          }
          break;

-    case SVGA_REG_DEPTH:
      case SVGA_REG_BITS_PER_PIXEL:
          if (value != ds_get_bits_per_pixel(s->vga.ds)) {
-            printf("%s: Bad colour depth: %i bits\n", __func__, value);
+            printf("%s: Bad bits per pixel: %i bits\n", __func__, value);
              s->config = 0;
          }
          break;
@@ -942,6 +940,7 @@  static void vmsvga_value_write(void *opaque, uint32_t address, uint32_t value)
  #endif
          break;

+    case SVGA_REG_DEPTH:
      case SVGA_REG_MEM_REGS:
      case SVGA_REG_NUM_DISPLAYS:
      case SVGA_REG_PITCHLOCK:
@@ -1080,7 +1079,7 @@  static const VMStateDescription vmstate_vmware_vga_internal = {
      .minimum_version_id_old = 0,
      .post_load = vmsvga_post_load,
      .fields      = (VMStateField[]) {
-        VMSTATE_INT32_EQUAL(depth, struct vmsvga_state_s),
+        VMSTATE_UNUSED(4), /* was depth */
          VMSTATE_INT32(enable, struct vmsvga_state_s),
          VMSTATE_INT32(config, struct vmsvga_state_s),
          VMSTATE_INT32(cursor.id, struct vmsvga_state_s),
@@ -1095,7 +1094,7 @@  static const VMStateDescription vmstate_vmware_vga_internal = {
          VMSTATE_UINT32(guest, struct vmsvga_state_s),
          VMSTATE_UINT32(svgaid, struct vmsvga_state_s),
          VMSTATE_INT32(syncing, struct vmsvga_state_s),
-        VMSTATE_INT32(fb_size, struct vmsvga_state_s),
+        VMSTATE_UNUSED(4), /* was fb_size */
          VMSTATE_END_OF_LIST()
      }
  };