diff mbox

Re: Inquring about Arm11mpcore

Message ID 87skfqcydi.fsf@brigitte.kvy.fi
State Superseded
Headers show

Commit Message

Antti P Miettinen Aug. 17, 2009, 2:23 p.m. UTC 
Antti P Miettinen <ananaza@iki.fi> writes:
> Paul Brook <paul@codesourcery.com> writes:
>> Make sure you're using the right board. qemu emulates a revB Emulation 
>> Baseboard plus core tile. This should work out the box.
>
> Do you have a linux kernel config that should work?

Seems that at least recent kernels want to check the PROCID
register. The below quick-and-dirty hack allows booting 2.6.30 on
realview with arm11mpcore. At least the following config options seem
relevant:

CONFIG_MACH_REALVIEW_EB=y
CONFIG_REALVIEW_EB_ARM11MP=y
CONFIG_REALVIEW_EB_ARM11MP_REVB=y
# CONFIG_REALVIEW_HIGH_PHYS_OFFSET is not set
diff mbox

Patch

diff --git a/hw/arm_sysctl.c b/hw/arm_sysctl.c
index 11b3787..3884e0d 100644
--- a/hw/arm_sysctl.c
+++ b/hw/arm_sysctl.c
@@ -23,6 +23,7 @@  typedef struct {
     uint32_t flags;
     uint32_t nvflags;
     uint32_t resetlevel;
+    uint32_t proc_id;
 } arm_sysctl_state;
 
 static uint32_t arm_sysctl_read(void *opaque, target_phys_addr_t offset)
@@ -76,8 +77,11 @@  static uint32_t arm_sysctl_read(void *opaque, target_phys_addr_t offset)
     case 0x60: /* MISC */
         return 0;
     case 0x84: /* PROCID0 */
-        /* ??? Don't know what the proper value for the core tile ID is.  */
-        return 0x02000000;
+        /* ??? Don't know what the proper value for the core tile ID is.
+	 * See e.g. Linux arch/arm/mach-realview/include/mach/board-eb.h
+	 * REALVIEW_EB_PROC_XX defines.
+	 */
+        return s->proc_id;
     case 0x88: /* PROCID1 */
         return 0xff000000;
     case 0x64: /* DMAPSR0 */
@@ -204,12 +208,13 @@  static void arm_sysctl_init1(SysBusDevice *dev)
 }
 
 /* Legacy helper function.  */
-void arm_sysctl_init(uint32_t base, uint32_t sys_id)
+void arm_sysctl_init(uint32_t base, uint32_t sys_id, uint32_t proc_id)
 {
     DeviceState *dev;
 
     dev = qdev_create(NULL, "realview_sysctl");
     qdev_prop_set_uint32(dev, "sys_id", sys_id);
+    qdev_prop_set_uint32(dev, "proc_id", proc_id);
     qdev_init(dev);
     sysbus_mmio_map(sysbus_from_qdev(dev), 0, base);
 }
@@ -220,6 +225,7 @@  static SysBusDeviceInfo arm_sysctl_info = {
     .qdev.size  = sizeof(arm_sysctl_state),
     .qdev.props = (Property[]) {
         DEFINE_PROP_UINT32("sys_id", arm_sysctl_state, sys_id, 0),
+        DEFINE_PROP_UINT32("proc_id", arm_sysctl_state, proc_id, 0),
         DEFINE_PROP_END_OF_LIST(),
     }
 };
diff --git a/hw/primecell.h b/hw/primecell.h
index 490ef8c..fb456ad 100644
--- a/hw/primecell.h
+++ b/hw/primecell.h
@@ -9,6 +9,6 @@ 
 void *pl080_init(uint32_t base, qemu_irq irq, int nchannels);
 
 /* arm_sysctl.c */
-void arm_sysctl_init(uint32_t base, uint32_t sys_id);
+void arm_sysctl_init(uint32_t base, uint32_t sys_id, uint32_t proc_id);
 
 #endif
diff --git a/hw/realview.c b/hw/realview.c
index 8e176b9..523cab7 100644
--- a/hw/realview.c
+++ b/hw/realview.c
@@ -19,7 +19,7 @@ 
 /* Board init.  */
 
 static struct arm_boot_info realview_binfo = {
-    .loader_start = 0x0,
+    .loader_start = 0x0 /*0x70000000*/,
     .smp_loader_start = 0x80000000,
     .board_id = 0x33b,
 };
@@ -40,13 +40,19 @@  static void realview_init(ram_addr_t ram_size,
     int done_smc = 0;
     qemu_irq cpu_irq[4];
     int ncpu;
+    uint32_t proc_id = 0; /* ARM7TDMI :-) */
 
     if (!cpu_model)
         cpu_model = "arm926";
     /* FIXME: obey smp_cpus.  */
     if (strcmp(cpu_model, "arm11mpcore") == 0) {
+        proc_id = 0x06000000;
         ncpu = 4;
     } else {
+	if (strcmp(cpu_model, "arm926") == 0)
+	    proc_id = 0x02000000;
+	else if (strcmp(cpu_model, "arm1136") == 0)
+	    proc_id = 0x04000000;
         ncpu = 1;
     }
 
@@ -71,7 +77,7 @@  static void realview_init(ram_addr_t ram_size,
     /* SDRAM at address zero.  */
     cpu_register_physical_memory(0, ram_size, ram_offset | IO_MEM_RAM);
 
-    arm_sysctl_init(0x10000000, 0xc1400400);
+    arm_sysctl_init(0x10000000, 0xc1400400, proc_id);
 
     if (ncpu == 1) {
         /* ??? The documentation says GIC1 is nFIQ and either GIC2 or GIC3
diff --git a/hw/versatilepb.c b/hw/versatilepb.c
index 3371121..d77674b 100644
--- a/hw/versatilepb.c
+++ b/hw/versatilepb.c
@@ -170,9 +170,16 @@  static void versatile_init(ram_addr_t ram_size,
     NICInfo *nd;
     int n;
     int done_smc = 0;
+    uint32_t proc_id = 0;
 
     if (!cpu_model)
         cpu_model = "arm926";
+    if (strcmp(cpu_model, "arm11mpcore") == 0)
+	proc_id = 0x06000000;
+    else if (strcmp(cpu_model, "arm926") == 0)
+	proc_id = 0x02000000;
+    else if (strcmp(cpu_model, "arm1136") == 0)
+	proc_id = 0x04000000;
     env = cpu_init(cpu_model);
     if (!env) {
         fprintf(stderr, "Unable to find CPU definition\n");
@@ -183,7 +190,7 @@  static void versatile_init(ram_addr_t ram_size,
     /* SDRAM at address zero.  */
     cpu_register_physical_memory(0, ram_size, ram_offset | IO_MEM_RAM);
 
-    arm_sysctl_init(0x10000000, 0x41007004);
+    arm_sysctl_init(0x10000000, 0x41007004, proc_id);
     cpu_pic = arm_pic_init_cpu(env);
     dev = sysbus_create_varargs("pl190", 0x10140000,
                                 cpu_pic[0], cpu_pic[1], NULL);