Message ID | 834d690eaf748800c9b3a7afd59d7cd31e706abd.1724556967.git.mchehab+huawei@kernel.org |
---|---|
State | New |
Headers | show |
Series | Add ACPI CPER firmware first error injection on ARM emulation | expand |
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> writes: > Creates a QMP command to be used for generic ACPI APEI hardware error > injection (HEST) via GHESv2, and add support for it for ARM guests. > > Error injection uses ACPI_HEST_SRC_ID_QMP source ID to be platform > independent. This is mapped at arch virt bindings, depending on the > types supported by QEMU and by the BIOS. So, on ARM, this is supported > via ACPI_GHES_NOTIFY_GPIO notification type. > > This patch is co-authored: > - original ghes logic to inject a simple ARM record by Shiju Jose; > - generic logic to handle block addresses by Jonathan Cameron; > - generic GHESv2 error inject by Mauro Carvalho Chehab; > > Co-authored-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > Co-authored-by: Shiju Jose <shiju.jose@huawei.com> > Co-authored-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> > Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > Signed-off-by: Shiju Jose <shiju.jose@huawei.com> > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> > --- > MAINTAINERS | 7 +++++++ > hw/acpi/Kconfig | 5 +++++ > hw/acpi/ghes_cper.c | 32 ++++++++++++++++++++++++++++++++ > hw/acpi/ghes_cper_stub.c | 19 +++++++++++++++++++ > hw/acpi/meson.build | 2 ++ > hw/arm/Kconfig | 5 +++++ > hw/arm/virt-acpi-build.c | 1 + > include/hw/acpi/ghes.h | 4 ++++ > include/hw/arm/virt.h | 2 ++ > qapi/acpi-hest.json | 36 ++++++++++++++++++++++++++++++++++++ > qapi/meson.build | 1 + > qapi/qapi-schema.json | 1 + > 12 files changed, 115 insertions(+) > create mode 100644 hw/acpi/ghes_cper.c > create mode 100644 hw/acpi/ghes_cper_stub.c > create mode 100644 qapi/acpi-hest.json > > diff --git a/MAINTAINERS b/MAINTAINERS > index 3584d6a6c6da..1d8091818899 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -2077,6 +2077,13 @@ F: hw/acpi/ghes.c > F: include/hw/acpi/ghes.h > F: docs/specs/acpi_hest_ghes.rst > > +ACPI/HEST/GHES/ARM processor CPER > +R: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> > +S: Maintained > +F: hw/arm/ghes_cper.c > +F: hw/acpi/ghes_cper_stub.c > +F: qapi/acpi-hest.json > + > ppc4xx > L: qemu-ppc@nongnu.org > S: Orphan > diff --git a/hw/acpi/Kconfig b/hw/acpi/Kconfig > index e07d3204eb36..73ffbb82c150 100644 > --- a/hw/acpi/Kconfig > +++ b/hw/acpi/Kconfig > @@ -51,6 +51,11 @@ config ACPI_APEI > bool > depends on ACPI > > +config GHES_CPER > + bool > + depends on ACPI_APEI > + default y > + > config ACPI_PCI > bool > depends on ACPI && PCI > diff --git a/hw/acpi/ghes_cper.c b/hw/acpi/ghes_cper.c > new file mode 100644 > index 000000000000..a10a5e7ab29b > --- /dev/null > +++ b/hw/acpi/ghes_cper.c > @@ -0,0 +1,32 @@ > +/* > + * CPER payload parser for error injection > + * > + * Copyright(C) 2024 Huawei LTD. > + * > + * This code is licensed under the GPL version 2 or later. See the > + * COPYING file in the top-level directory. > + * > + */ > + > +#include "qemu/osdep.h" > + > +#include "qemu/base64.h" > +#include "qemu/error-report.h" > +#include "qemu/uuid.h" > +#include "qapi/qapi-commands-acpi-hest.h" > +#include "hw/acpi/ghes.h" > + > +void qmp_ghes_cper(const char *qmp_cper, Error **errp) > +{ > + > + uint8_t *cper; > + size_t len; > + > + cper = qbase64_decode(qmp_cper, -1, &len, errp); > + if (!cper) { > + error_setg(errp, "missing GHES CPER payload"); > + return; > + } > + > + ghes_record_cper_errors(cper, len, ACPI_HEST_SRC_ID_QMP, errp); > +} > diff --git a/hw/acpi/ghes_cper_stub.c b/hw/acpi/ghes_cper_stub.c > new file mode 100644 > index 000000000000..36138c462ac9 > --- /dev/null > +++ b/hw/acpi/ghes_cper_stub.c > @@ -0,0 +1,19 @@ > +/* > + * Stub interface for CPER payload parser for error injection > + * > + * Copyright(C) 2024 Huawei LTD. > + * > + * This code is licensed under the GPL version 2 or later. See the > + * COPYING file in the top-level directory. > + * > + */ > + > +#include "qemu/osdep.h" > +#include "qapi/error.h" > +#include "qapi/qapi-commands-acpi-hest.h" > +#include "hw/acpi/ghes.h" > + > +void qmp_ghes_cper(const char *cper, Error **errp) > +{ > + error_setg(errp, "GHES QMP error inject is not compiled in"); > +} > diff --git a/hw/acpi/meson.build b/hw/acpi/meson.build > index fa5c07db9068..6cbf430eb66d 100644 > --- a/hw/acpi/meson.build > +++ b/hw/acpi/meson.build > @@ -34,4 +34,6 @@ endif > system_ss.add(when: 'CONFIG_ACPI', if_false: files('acpi-stub.c', 'aml-build-stub.c', 'ghes-stub.c', 'acpi_interface.c')) > system_ss.add(when: 'CONFIG_ACPI_PCI_BRIDGE', if_false: files('pci-bridge-stub.c')) > system_ss.add_all(when: 'CONFIG_ACPI', if_true: acpi_ss) > +system_ss.add(when: 'CONFIG_GHES_CPER', if_true: files('ghes_cper.c')) > +system_ss.add(when: 'CONFIG_GHES_CPER', if_false: files('ghes_cper_stub.c')) > system_ss.add(files('acpi-qmp-cmds.c')) > diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig > index 1ad60da7aa2d..bed6ba27d715 100644 > --- a/hw/arm/Kconfig > +++ b/hw/arm/Kconfig > @@ -712,3 +712,8 @@ config ARMSSE > select UNIMP > select SSE_COUNTER > select SSE_TIMER > + > +config GHES_CPER > + bool > + depends on ARM > + default y if AARCH64 > diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c > index 9c36da3c831f..a6b03b16d922 100644 > --- a/hw/arm/virt-acpi-build.c > +++ b/hw/arm/virt-acpi-build.c > @@ -893,6 +893,7 @@ static void acpi_align_size(GArray *blob, unsigned align) > > static const uint16_t hest_ghes_notify[] = { > [ARM_ACPI_HEST_SRC_ID_SEA] = ACPI_GHES_NOTIFY_SEA, > + [ARM_ACPI_HEST_SRC_ID_GPIO] = ACPI_GHES_NOTIFY_GPIO, > }; > > static > diff --git a/include/hw/acpi/ghes.h b/include/hw/acpi/ghes.h > index b1ec9795270f..ea6b33e133d6 100644 > --- a/include/hw/acpi/ghes.h > +++ b/include/hw/acpi/ghes.h > @@ -66,6 +66,10 @@ typedef struct AcpiGhesState { > bool present; /* True if GHES is present at all on this board */ > } AcpiGhesState; > > + > +/* Source ID associated with qapi/acpi-hest.json QMP error injection */ > +#define ACPI_HEST_SRC_ID_QMP 0 > + > void acpi_build_hest(GArray *table_data, GArray *hardware_errors, > BIOSLinker *linker, > const uint16_t * const notify, > diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h > index 1c682d43fdac..8b042053dfa1 100644 > --- a/include/hw/arm/virt.h > +++ b/include/hw/arm/virt.h > @@ -33,6 +33,7 @@ > #include "exec/hwaddr.h" > #include "qemu/notify.h" > #include "hw/boards.h" > +#include "hw/acpi/ghes.h" > #include "hw/arm/boot.h" > #include "hw/arm/bsa.h" > #include "hw/block/flash.h" > @@ -194,6 +195,7 @@ bool virt_is_acpi_enabled(VirtMachineState *vms); > * ID numbers used to fill HEST source ID field > */ > enum { > + ARM_ACPI_HEST_SRC_ID_GPIO = ACPI_HEST_SRC_ID_QMP, > ARM_ACPI_HEST_SRC_ID_SEA, > }; > > diff --git a/qapi/acpi-hest.json b/qapi/acpi-hest.json > new file mode 100644 > index 000000000000..0255695c95ad > --- /dev/null > +++ b/qapi/acpi-hest.json > @@ -0,0 +1,36 @@ > +# -*- Mode: Python -*- > +# vim: filetype=python > + > +## > +# = GHESv2 CPER Error Injection This makes it a section next to section ACPI. Should it be a subjection of ACPI? If yes, add a second =. > +# > +# Defined since ACPI Specification 6.1, > +# section 18.3.2.8 Generic Hardware Error Source version 2. See: > +# > +# https://uefi.org/sites/default/files/resources/ACPI_6_1.pdf > +## > + > + > +## > +# @ghes-cper: Can we pick a command name that provides more of a clue to the uninitiated on what the command does? inject-ghes-cper? inject-ghes-cper-error? > +# > +# Inject a CPER error data to be filled according to ACPI 6.1 > +# spec via GHESv2. It's either "a datum", or "data". Scratch "data"? What do you mean by "to be filled"? Who's doing the filling? What about something like "Inject an error with additional ACPI 6.1 GHES v2 error information"? > +# > +# @cper: contains a base64 encoded string with raw data for a single CPER > +# record with Generic Error Status Block, Generic Error Data Entry and > +# generic error data payload, as described at > +# https://uefi.org/specs/UEFI/2.10/Apx_N_Common_Platform_Error_Record.html#format docs/devel/qapi-code-gen.rst: For legibility, wrap text paragraphs so every line is at most 70 characters long. Thus: # @cper: contains a base64 encoded string with raw data for a single # CPER record with Generic Error Status Block, Generic Error Data # Entry and generic error data payload, as described at # https://uefi.org/specs/UEFI/2.10/Apx_N_Common_Platform_Error_Record.html#format > +# > +# Features: > +# > +# @unstable: This command is experimental. > +# > +# Since: 9.2 > +## > +{ 'command': 'ghes-cper', > + 'data': { > + 'cper': 'str' > + }, > + 'features': [ 'unstable' ] > +} > diff --git a/qapi/meson.build b/qapi/meson.build > index e7bc54e5d047..35cea6147262 100644 > --- a/qapi/meson.build > +++ b/qapi/meson.build > @@ -59,6 +59,7 @@ qapi_all_modules = [ > if have_system > qapi_all_modules += [ > 'acpi', > + 'acpi-hest', > 'audio', > 'cryptodev', > 'qdev', > diff --git a/qapi/qapi-schema.json b/qapi/qapi-schema.json > index b1581988e4eb..baf19ab73afe 100644 > --- a/qapi/qapi-schema.json > +++ b/qapi/qapi-schema.json > @@ -75,6 +75,7 @@ > { 'include': 'misc-target.json' } > { 'include': 'audio.json' } > { 'include': 'acpi.json' } > +{ 'include': 'acpi-hest.json' } > { 'include': 'pci.json' } > { 'include': 'stats.json' } > { 'include': 'virtio.json' }
diff --git a/MAINTAINERS b/MAINTAINERS index 3584d6a6c6da..1d8091818899 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2077,6 +2077,13 @@ F: hw/acpi/ghes.c F: include/hw/acpi/ghes.h F: docs/specs/acpi_hest_ghes.rst +ACPI/HEST/GHES/ARM processor CPER +R: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> +S: Maintained +F: hw/arm/ghes_cper.c +F: hw/acpi/ghes_cper_stub.c +F: qapi/acpi-hest.json + ppc4xx L: qemu-ppc@nongnu.org S: Orphan diff --git a/hw/acpi/Kconfig b/hw/acpi/Kconfig index e07d3204eb36..73ffbb82c150 100644 --- a/hw/acpi/Kconfig +++ b/hw/acpi/Kconfig @@ -51,6 +51,11 @@ config ACPI_APEI bool depends on ACPI +config GHES_CPER + bool + depends on ACPI_APEI + default y + config ACPI_PCI bool depends on ACPI && PCI diff --git a/hw/acpi/ghes_cper.c b/hw/acpi/ghes_cper.c new file mode 100644 index 000000000000..a10a5e7ab29b --- /dev/null +++ b/hw/acpi/ghes_cper.c @@ -0,0 +1,32 @@ +/* + * CPER payload parser for error injection + * + * Copyright(C) 2024 Huawei LTD. + * + * This code is licensed under the GPL version 2 or later. See the + * COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" + +#include "qemu/base64.h" +#include "qemu/error-report.h" +#include "qemu/uuid.h" +#include "qapi/qapi-commands-acpi-hest.h" +#include "hw/acpi/ghes.h" + +void qmp_ghes_cper(const char *qmp_cper, Error **errp) +{ + + uint8_t *cper; + size_t len; + + cper = qbase64_decode(qmp_cper, -1, &len, errp); + if (!cper) { + error_setg(errp, "missing GHES CPER payload"); + return; + } + + ghes_record_cper_errors(cper, len, ACPI_HEST_SRC_ID_QMP, errp); +} diff --git a/hw/acpi/ghes_cper_stub.c b/hw/acpi/ghes_cper_stub.c new file mode 100644 index 000000000000..36138c462ac9 --- /dev/null +++ b/hw/acpi/ghes_cper_stub.c @@ -0,0 +1,19 @@ +/* + * Stub interface for CPER payload parser for error injection + * + * Copyright(C) 2024 Huawei LTD. + * + * This code is licensed under the GPL version 2 or later. See the + * COPYING file in the top-level directory. + * + */ + +#include "qemu/osdep.h" +#include "qapi/error.h" +#include "qapi/qapi-commands-acpi-hest.h" +#include "hw/acpi/ghes.h" + +void qmp_ghes_cper(const char *cper, Error **errp) +{ + error_setg(errp, "GHES QMP error inject is not compiled in"); +} diff --git a/hw/acpi/meson.build b/hw/acpi/meson.build index fa5c07db9068..6cbf430eb66d 100644 --- a/hw/acpi/meson.build +++ b/hw/acpi/meson.build @@ -34,4 +34,6 @@ endif system_ss.add(when: 'CONFIG_ACPI', if_false: files('acpi-stub.c', 'aml-build-stub.c', 'ghes-stub.c', 'acpi_interface.c')) system_ss.add(when: 'CONFIG_ACPI_PCI_BRIDGE', if_false: files('pci-bridge-stub.c')) system_ss.add_all(when: 'CONFIG_ACPI', if_true: acpi_ss) +system_ss.add(when: 'CONFIG_GHES_CPER', if_true: files('ghes_cper.c')) +system_ss.add(when: 'CONFIG_GHES_CPER', if_false: files('ghes_cper_stub.c')) system_ss.add(files('acpi-qmp-cmds.c')) diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index 1ad60da7aa2d..bed6ba27d715 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -712,3 +712,8 @@ config ARMSSE select UNIMP select SSE_COUNTER select SSE_TIMER + +config GHES_CPER + bool + depends on ARM + default y if AARCH64 diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index 9c36da3c831f..a6b03b16d922 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -893,6 +893,7 @@ static void acpi_align_size(GArray *blob, unsigned align) static const uint16_t hest_ghes_notify[] = { [ARM_ACPI_HEST_SRC_ID_SEA] = ACPI_GHES_NOTIFY_SEA, + [ARM_ACPI_HEST_SRC_ID_GPIO] = ACPI_GHES_NOTIFY_GPIO, }; static diff --git a/include/hw/acpi/ghes.h b/include/hw/acpi/ghes.h index b1ec9795270f..ea6b33e133d6 100644 --- a/include/hw/acpi/ghes.h +++ b/include/hw/acpi/ghes.h @@ -66,6 +66,10 @@ typedef struct AcpiGhesState { bool present; /* True if GHES is present at all on this board */ } AcpiGhesState; + +/* Source ID associated with qapi/acpi-hest.json QMP error injection */ +#define ACPI_HEST_SRC_ID_QMP 0 + void acpi_build_hest(GArray *table_data, GArray *hardware_errors, BIOSLinker *linker, const uint16_t * const notify, diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h index 1c682d43fdac..8b042053dfa1 100644 --- a/include/hw/arm/virt.h +++ b/include/hw/arm/virt.h @@ -33,6 +33,7 @@ #include "exec/hwaddr.h" #include "qemu/notify.h" #include "hw/boards.h" +#include "hw/acpi/ghes.h" #include "hw/arm/boot.h" #include "hw/arm/bsa.h" #include "hw/block/flash.h" @@ -194,6 +195,7 @@ bool virt_is_acpi_enabled(VirtMachineState *vms); * ID numbers used to fill HEST source ID field */ enum { + ARM_ACPI_HEST_SRC_ID_GPIO = ACPI_HEST_SRC_ID_QMP, ARM_ACPI_HEST_SRC_ID_SEA, }; diff --git a/qapi/acpi-hest.json b/qapi/acpi-hest.json new file mode 100644 index 000000000000..0255695c95ad --- /dev/null +++ b/qapi/acpi-hest.json @@ -0,0 +1,36 @@ +# -*- Mode: Python -*- +# vim: filetype=python + +## +# = GHESv2 CPER Error Injection +# +# Defined since ACPI Specification 6.1, +# section 18.3.2.8 Generic Hardware Error Source version 2. See: +# +# https://uefi.org/sites/default/files/resources/ACPI_6_1.pdf +## + + +## +# @ghes-cper: +# +# Inject a CPER error data to be filled according to ACPI 6.1 +# spec via GHESv2. +# +# @cper: contains a base64 encoded string with raw data for a single CPER +# record with Generic Error Status Block, Generic Error Data Entry and +# generic error data payload, as described at +# https://uefi.org/specs/UEFI/2.10/Apx_N_Common_Platform_Error_Record.html#format +# +# Features: +# +# @unstable: This command is experimental. +# +# Since: 9.2 +## +{ 'command': 'ghes-cper', + 'data': { + 'cper': 'str' + }, + 'features': [ 'unstable' ] +} diff --git a/qapi/meson.build b/qapi/meson.build index e7bc54e5d047..35cea6147262 100644 --- a/qapi/meson.build +++ b/qapi/meson.build @@ -59,6 +59,7 @@ qapi_all_modules = [ if have_system qapi_all_modules += [ 'acpi', + 'acpi-hest', 'audio', 'cryptodev', 'qdev', diff --git a/qapi/qapi-schema.json b/qapi/qapi-schema.json index b1581988e4eb..baf19ab73afe 100644 --- a/qapi/qapi-schema.json +++ b/qapi/qapi-schema.json @@ -75,6 +75,7 @@ { 'include': 'misc-target.json' } { 'include': 'audio.json' } { 'include': 'acpi.json' } +{ 'include': 'acpi-hest.json' } { 'include': 'pci.json' } { 'include': 'stats.json' } { 'include': 'virtio.json' }