@@ -79,7 +79,7 @@ class TestBlockdevReopen(iotests.QMPTestCase):
for line in log.split("\n"):
if line.startswith("Pattern verification failed"):
raise Exception("%s (command #%d)" % (line, found))
- if re.match("read .*/.* bytes at offset", line):
+ if re.match("(read|wrote) .*/.* bytes at offset", line):
found += 1
self.assertEqual(found, self.total_io_cmds,
"Expected output of %d qemu-io commands, found %d" %
@@ -537,6 +537,113 @@ class TestBlockdevReopen(iotests.QMPTestCase):
result = self.vm.qmp('blockdev-del', conv_keys = True, node_name = 'bv')
self.assert_qmp(result, 'return', {})
+ # Replace the protocol layer ('file' parameter) of a disk image
+ def test_replace_file(self):
+ # Create two small raw images and add them to a running VM
+ qemu_img('create', '-f', 'raw', hd_path[0], '10k')
+ qemu_img('create', '-f', 'raw', hd_path[1], '10k')
+
+ hd0_opts = {'driver': 'file', 'node-name': 'hd0-file', 'filename': hd_path[0] }
+ hd1_opts = {'driver': 'file', 'node-name': 'hd1-file', 'filename': hd_path[1] }
+
+ result = self.vm.qmp('blockdev-add', conv_keys = False, **hd0_opts)
+ self.assert_qmp(result, 'return', {})
+ result = self.vm.qmp('blockdev-add', conv_keys = False, **hd1_opts)
+ self.assert_qmp(result, 'return', {})
+
+ # Add a raw format layer that uses hd0-file as its protocol layer
+ opts = {'driver': 'raw', 'node-name': 'hd', 'file': 'hd0-file'}
+
+ result = self.vm.qmp('blockdev-add', conv_keys = False, **opts)
+ self.assert_qmp(result, 'return', {})
+
+ # Fill the image with data
+ self.run_qemu_io("hd", "read -P 0 0 10k")
+ self.run_qemu_io("hd", "write -P 0xa0 0 10k")
+
+ # Replace hd0-file with hd1-file and fill it with (different) data
+ self.reopen(opts, {'file': 'hd1-file'})
+ self.run_qemu_io("hd", "read -P 0 0 10k")
+ self.run_qemu_io("hd", "write -P 0xa1 0 10k")
+
+ # Use hd0-file again and check that it contains the expected data
+ self.reopen(opts, {'file': 'hd0-file'})
+ self.run_qemu_io("hd", "read -P 0xa0 0 10k")
+
+ # And finally do the same with hd1-file
+ self.reopen(opts, {'file': 'hd1-file'})
+ self.run_qemu_io("hd", "read -P 0xa1 0 10k")
+
+ # Insert (and remove) a throttle filter
+ def test_insert_throttle_filter(self):
+ # Add an image to the VM
+ hd0_opts = hd_opts(0)
+ result = self.vm.qmp('blockdev-add', conv_keys = False, **hd0_opts)
+ self.assert_qmp(result, 'return', {})
+
+ # Create a throttle-group object
+ opts = { 'qom-type': 'throttle-group', 'id': 'group0',
+ 'limits': { 'iops-total': 1000 } }
+ result = self.vm.qmp('object-add', conv_keys = False, **opts)
+ self.assert_qmp(result, 'return', {})
+
+ # Add a throttle filter with the group that we just created.
+ # The filter is not used by anyone yet
+ opts = { 'driver': 'throttle', 'node-name': 'throttle0',
+ 'throttle-group': 'group0', 'file': 'hd0-file' }
+ result = self.vm.qmp('blockdev-add', conv_keys = False, **opts)
+ self.assert_qmp(result, 'return', {})
+
+ # Insert the throttle filter between hd0 and hd0-file
+ self.reopen(hd0_opts, {'file': 'throttle0'})
+
+ # Remove the throttle filter from hd0
+ self.reopen(hd0_opts, {'file': 'hd0-file'})
+
+ # Insert (and remove) a compress filter
+ def test_insert_compress_filter(self):
+ # Add an image to the VM: hd (raw) -> hd0 (qcow2) -> hd0-file (file)
+ opts = {'driver': 'raw', 'node-name': 'hd', 'file': hd_opts(0)}
+ result = self.vm.qmp('blockdev-add', conv_keys = False, **opts)
+ self.assert_qmp(result, 'return', {})
+
+ # Add a 'compress' filter
+ filter_opts = {'driver': 'compress',
+ 'node-name': 'compress0',
+ 'file': 'hd0'}
+ result = self.vm.qmp('blockdev-add', conv_keys = False, **filter_opts)
+ self.assert_qmp(result, 'return', {})
+
+ # Unmap the beginning of the image (we cannot write compressed
+ # data to an allocated cluster)
+ self.run_qemu_io("hd", "write -z -u 0 128k")
+
+ # Write data to the first cluster
+ self.run_qemu_io("hd", "write -P 0xa0 0 64k")
+
+ # Insert the filter then write to the second cluster
+ # hd -> compress0 -> hd0 -> hd0-file
+ self.reopen(opts, {'file': 'compress0'})
+ self.run_qemu_io("hd", "write -P 0xa1 64k 64k")
+
+ # Remove the filter then write to the third cluster
+ # hd -> hd0 -> hd0-file
+ self.reopen(opts, {'file': 'hd0'})
+ self.run_qemu_io("hd", "write -P 0xa2 128k 64k")
+
+ # Verify the data that we just wrote
+ self.run_qemu_io("hd", "read -P 0xa0 0 64k")
+ self.run_qemu_io("hd", "read -P 0xa1 64k 64k")
+ self.run_qemu_io("hd", "read -P 0xa2 128k 64k")
+
+ self.vm.shutdown()
+
+ # Check the first byte of the first three L2 entries and verify that
+ # the second one is compressed (0x40) while the others are not (0x80)
+ iotests.qemu_io_log('-f', 'raw', '-c', 'read -P 0x80 0x40000 1',
+ '-c', 'read -P 0x40 0x40008 1',
+ '-c', 'read -P 0x80 0x40010 1', hd_path[0])
+
# Misc reopen tests with different block drivers
@iotests.skip_if_unsupported(['quorum', 'throttle'])
def test_misc_drivers(self):
@@ -10,8 +10,15 @@
{"return": {}}
{"data": {"id": "stream0", "type": "stream"}, "event": "BLOCK_JOB_PENDING", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
{"data": {"device": "stream0", "len": 3145728, "offset": 3145728, "speed": 0, "type": "stream"}, "event": "BLOCK_JOB_COMPLETED", "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
-.....................
+read 1/1 bytes at offset 262144
+1 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 1/1 bytes at offset 262152
+1 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+read 1/1 bytes at offset 262160
+1 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+........................
----------------------------------------------------------------------
-Ran 21 tests
+Ran 24 tests
OK
This patch adds new tests in which we use x-blockdev-reopen to change bs->file Signed-off-by: Alberto Garcia <berto@igalia.com> --- tests/qemu-iotests/245 | 109 ++++++++++++++++++++++++++++++++++++- tests/qemu-iotests/245.out | 11 +++- 2 files changed, 117 insertions(+), 3 deletions(-)