[3/5] seabios: acpi: move acpi definitions to acpi.h from acpi.c

diff --git a/src/acpi.c b/src/acpi.c
index 8de2696..97b496d 100644
--- a/src/acpi.c
+++ b/src/acpi.c
@@ -19,18 +19,6 @@ 
 /* Table structure from Linux kernel (the ACPI tables are under the
    BSD license) */
 
-#define ACPI_TABLE_HEADER_DEF   /* ACPI common table header */ \
-    u32 signature;          /* ACPI signature (4 ASCII characters) */ \
-    u32 length;                 /* Length of table, in bytes, including header */ \
-    u8  revision;               /* ACPI Specification minor version # */ \
-    u8  checksum;               /* To make sum of entire table == 0 */ \
-    u8  oem_id [6];             /* OEM identification */ \
-    u8  oem_table_id [8];       /* OEM table identification */ \
-    u32 oem_revision;           /* OEM revision number */ \
-    u8  asl_compiler_id [4];    /* ASL compiler vendor ID */ \
-    u32 asl_compiler_revision;  /* ASL compiler revision number */
-
-
 struct acpi_table_header         /* ACPI common table header */
 {
     ACPI_TABLE_HEADER_DEF
@@ -65,67 +53,6 @@  struct facs_descriptor_rev1
 
 
 /*
- * ACPI 1.0 Fixed ACPI Description Table (FADT)
- */
-#define FACP_SIGNATURE 0x50434146 // FACP
-struct fadt_descriptor_rev1
-{
-    ACPI_TABLE_HEADER_DEF     /* ACPI common table header */
-    u32 firmware_ctrl;          /* Physical address of FACS */
-    u32 dsdt;                   /* Physical address of DSDT */
-    u8  model;                  /* System Interrupt Model */
-    u8  reserved1;              /* Reserved */
-    u16 sci_int;                /* System vector of SCI interrupt */
-    u32 smi_cmd;                /* Port address of SMI command port */
-    u8  acpi_enable;            /* Value to write to smi_cmd to enable ACPI */
-    u8  acpi_disable;           /* Value to write to smi_cmd to disable ACPI */
-    u8  S4bios_req;             /* Value to write to SMI CMD to enter S4BIOS state */
-    u8  reserved2;              /* Reserved - must be zero */
-    u32 pm1a_evt_blk;           /* Port address of Power Mgt 1a acpi_event Reg Blk */
-    u32 pm1b_evt_blk;           /* Port address of Power Mgt 1b acpi_event Reg Blk */
-    u32 pm1a_cnt_blk;           /* Port address of Power Mgt 1a Control Reg Blk */
-    u32 pm1b_cnt_blk;           /* Port address of Power Mgt 1b Control Reg Blk */
-    u32 pm2_cnt_blk;            /* Port address of Power Mgt 2 Control Reg Blk */
-    u32 pm_tmr_blk;             /* Port address of Power Mgt Timer Ctrl Reg Blk */
-    u32 gpe0_blk;               /* Port addr of General Purpose acpi_event 0 Reg Blk */
-    u32 gpe1_blk;               /* Port addr of General Purpose acpi_event 1 Reg Blk */
-    u8  pm1_evt_len;            /* Byte length of ports at pm1_x_evt_blk */
-    u8  pm1_cnt_len;            /* Byte length of ports at pm1_x_cnt_blk */
-    u8  pm2_cnt_len;            /* Byte Length of ports at pm2_cnt_blk */
-    u8  pm_tmr_len;             /* Byte Length of ports at pm_tm_blk */
-    u8  gpe0_blk_len;           /* Byte Length of ports at gpe0_blk */
-    u8  gpe1_blk_len;           /* Byte Length of ports at gpe1_blk */
-    u8  gpe1_base;              /* Offset in gpe model where gpe1 events start */
-    u8  reserved3;              /* Reserved */
-    u16 plvl2_lat;              /* Worst case HW latency to enter/exit C2 state */
-    u16 plvl3_lat;              /* Worst case HW latency to enter/exit C3 state */
-    u16 flush_size;             /* Size of area read to flush caches */
-    u16 flush_stride;           /* Stride used in flushing caches */
-    u8  duty_offset;            /* Bit location of duty cycle field in p_cnt reg */
-    u8  duty_width;             /* Bit width of duty cycle field in p_cnt reg */
-    u8  day_alrm;               /* Index to day-of-month alarm in RTC CMOS RAM */
-    u8  mon_alrm;               /* Index to month-of-year alarm in RTC CMOS RAM */
-    u8  century;                /* Index to century in RTC CMOS RAM */
-    u8  reserved4;              /* Reserved */
-    u8  reserved4a;             /* Reserved */
-    u8  reserved4b;             /* Reserved */
-#if 0
-    u32 wb_invd         : 1;    /* The wbinvd instruction works properly */
-    u32 wb_invd_flush   : 1;    /* The wbinvd flushes but does not invalidate */
-    u32 proc_c1         : 1;    /* All processors support C1 state */
-    u32 plvl2_up        : 1;    /* C2 state works on MP system */
-    u32 pwr_button      : 1;    /* Power button is handled as a generic feature */
-    u32 sleep_button    : 1;    /* Sleep button is handled as a generic feature, or not present */
-    u32 fixed_rTC       : 1;    /* RTC wakeup stat not in fixed register space */
-    u32 rtcs4           : 1;    /* RTC wakeup stat not possible from S4 */
-    u32 tmr_val_ext     : 1;    /* The tmr_val width is 32 bits (0 = 24 bits) */
-    u32 reserved5       : 23;   /* Reserved - must be zero */
-#else
-    u32 flags;
-#endif
-} PACKED;
-
-/*
  * MADT values and structures
  */
 
diff --git a/src/acpi.h b/src/acpi.h
index c3ae84c..e01315a 100644
--- a/src/acpi.h
+++ b/src/acpi.h
@@ -22,4 +22,80 @@  struct rsdp_descriptor {        /* Root System Descriptor Pointer */
 
 extern struct rsdp_descriptor *RsdpAddr;
 
+/* Table structure from Linux kernel (the ACPI tables are under the
+   BSD license) */
+
+#define ACPI_TABLE_HEADER_DEF   /* ACPI common table header */ \
+    u32 signature;          /* ACPI signature (4 ASCII characters) */ \
+    u32 length;                 /* Length of table, in bytes, including header */ \
+    u8  revision;               /* ACPI Specification minor version # */ \
+    u8  checksum;               /* To make sum of entire table == 0 */ \
+    u8  oem_id [6];             /* OEM identification */ \
+    u8  oem_table_id [8];       /* OEM table identification */ \
+    u32 oem_revision;           /* OEM revision number */ \
+    u8  asl_compiler_id [4];    /* ASL compiler vendor ID */ \
+    u32 asl_compiler_revision;  /* ASL compiler revision number */
+
+
+/*
+ * ACPI 1.0 Fixed ACPI Description Table (FADT)
+ */
+#define FACP_SIGNATURE 0x50434146 // FACP
+struct fadt_descriptor_rev1
+{
+    ACPI_TABLE_HEADER_DEF     /* ACPI common table header */
+    u32 firmware_ctrl;          /* Physical address of FACS */
+    u32 dsdt;                   /* Physical address of DSDT */
+    u8  model;                  /* System Interrupt Model */
+    u8  reserved1;              /* Reserved */
+    u16 sci_int;                /* System vector of SCI interrupt */
+    u32 smi_cmd;                /* Port address of SMI command port */
+    u8  acpi_enable;            /* Value to write to smi_cmd to enable ACPI */
+    u8  acpi_disable;           /* Value to write to smi_cmd to disable ACPI */
+    u8  S4bios_req;             /* Value to write to SMI CMD to enter S4BIOS state */
+    u8  reserved2;              /* Reserved - must be zero */
+    u32 pm1a_evt_blk;           /* Port address of Power Mgt 1a acpi_event Reg Blk */
+    u32 pm1b_evt_blk;           /* Port address of Power Mgt 1b acpi_event Reg Blk */
+    u32 pm1a_cnt_blk;           /* Port address of Power Mgt 1a Control Reg Blk */
+    u32 pm1b_cnt_blk;           /* Port address of Power Mgt 1b Control Reg Blk */
+    u32 pm2_cnt_blk;            /* Port address of Power Mgt 2 Control Reg Blk */
+    u32 pm_tmr_blk;             /* Port address of Power Mgt Timer Ctrl Reg Blk */
+    u32 gpe0_blk;               /* Port addr of General Purpose acpi_event 0 Reg Blk */
+    u32 gpe1_blk;               /* Port addr of General Purpose acpi_event 1 Reg Blk */
+    u8  pm1_evt_len;            /* Byte length of ports at pm1_x_evt_blk */
+    u8  pm1_cnt_len;            /* Byte length of ports at pm1_x_cnt_blk */
+    u8  pm2_cnt_len;            /* Byte Length of ports at pm2_cnt_blk */
+    u8  pm_tmr_len;             /* Byte Length of ports at pm_tm_blk */
+    u8  gpe0_blk_len;           /* Byte Length of ports at gpe0_blk */
+    u8  gpe1_blk_len;           /* Byte Length of ports at gpe1_blk */
+    u8  gpe1_base;              /* Offset in gpe model where gpe1 events start */
+    u8  reserved3;              /* Reserved */
+    u16 plvl2_lat;              /* Worst case HW latency to enter/exit C2 state */
+    u16 plvl3_lat;              /* Worst case HW latency to enter/exit C3 state */
+    u16 flush_size;             /* Size of area read to flush caches */
+    u16 flush_stride;           /* Stride used in flushing caches */
+    u8  duty_offset;            /* Bit location of duty cycle field in p_cnt reg */
+    u8  duty_width;             /* Bit width of duty cycle field in p_cnt reg */
+    u8  day_alrm;               /* Index to day-of-month alarm in RTC CMOS RAM */
+    u8  mon_alrm;               /* Index to month-of-year alarm in RTC CMOS RAM */
+    u8  century;                /* Index to century in RTC CMOS RAM */
+    u8  reserved4;              /* Reserved */
+    u8  reserved4a;             /* Reserved */
+    u8  reserved4b;             /* Reserved */
+#if 0
+    u32 wb_invd         : 1;    /* The wbinvd instruction works properly */
+    u32 wb_invd_flush   : 1;    /* The wbinvd flushes but does not invalidate */
+    u32 proc_c1         : 1;    /* All processors support C1 state */
+    u32 plvl2_up        : 1;    /* C2 state works on MP system */
+    u32 pwr_button      : 1;    /* Power button is handled as a generic feature */
+    u32 sleep_button    : 1;    /* Sleep button is handled as a generic feature, or not present */
+    u32 fixed_rTC       : 1;    /* RTC wakeup stat not in fixed register space */
+    u32 rtcs4           : 1;    /* RTC wakeup stat not possible from S4 */
+    u32 tmr_val_ext     : 1;    /* The tmr_val width is 32 bits (0 = 24 bits) */
+    u32 reserved5       : 23;   /* Reserved - must be zero */
+#else
+    u32 flags;
+#endif
+} PACKED;
+
 #endif // acpi.h