diff mbox series

[PULL,2/2] migration/dirtyrate: use QEMU_CLOCK_HOST to report start-time

Message ID 320a6ccc769dc09ae7ad0b4838e322018f334bf4.1696896603.git.yong.huang@smartx.com
State New
Headers show
Series [PULL,1/2] migration/calc-dirty-rate: millisecond-granularity period | expand

Commit Message

Yong Huang Oct. 10, 2023, 12:31 a.m. UTC 
From: Andrei Gudkov <gudkov.andrei@huawei.com>

Currently query-dirty-rate uses QEMU_CLOCK_REALTIME as
the source for start-time field. This translates to
clock_gettime(CLOCK_MONOTONIC), i.e. number of seconds
since host boot. This is not very useful. The only
reasonable use case of start-time I can imagine is to
check whether previously completed measurements are
too old or not. But this makes sense only if start-time
is reported as host wall-clock time.

This patch replaces source of start-time from
QEMU_CLOCK_REALTIME to QEMU_CLOCK_HOST.

Signed-off-by: Andrei Gudkov <gudkov.andrei@huawei.com>
Reviewed-by: Hyman Huang <yong.huang@smartx.com>
Message-Id: <399861531e3b24a1ecea2ba453fb2c3d129fb03a.1693905328.git.gudkov.andrei@huawei.com>
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
---
 migration/dirtyrate.c | 15 ++++++---------
 qapi/migration.json   |  4 ++--
 2 files changed, 8 insertions(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/migration/dirtyrate.c b/migration/dirtyrate.c
index a461b28bb5..036ac017fc 100644
--- a/migration/dirtyrate.c
+++ b/migration/dirtyrate.c
@@ -293,11 +293,10 @@  query_dirty_rate_info(TimeUnit calc_time_unit)
     return info;
 }
 
-static void init_dirtyrate_stat(int64_t start_time,
-                                struct DirtyRateConfig config)
+static void init_dirtyrate_stat(struct DirtyRateConfig config)
 {
     DirtyStat.dirty_rate = -1;
-    DirtyStat.start_time = start_time;
+    DirtyStat.start_time = qemu_clock_get_ms(QEMU_CLOCK_HOST) / 1000;
     DirtyStat.calc_time_ms = config.calc_time_ms;
     DirtyStat.sample_pages = config.sample_pages_per_gigabytes;
 
@@ -633,7 +632,7 @@  static void calculate_dirtyrate_dirty_bitmap(struct DirtyRateConfig config)
     record_dirtypages_bitmap(&dirty_pages, true);
 
     start_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
-    DirtyStat.start_time = start_time / 1000;
+    DirtyStat.start_time = qemu_clock_get_ms(QEMU_CLOCK_HOST) / 1000;
 
     DirtyStat.calc_time_ms = dirty_stat_wait(config.calc_time_ms, start_time);
 
@@ -659,7 +658,7 @@  static void calculate_dirtyrate_dirty_ring(struct DirtyRateConfig config)
     /* start log sync */
     global_dirty_log_change(GLOBAL_DIRTY_DIRTY_RATE, true);
 
-    DirtyStat.start_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME) / 1000;
+    DirtyStat.start_time = qemu_clock_get_ms(QEMU_CLOCK_HOST) / 1000;
 
     /* calculate vcpu dirtyrate */
     DirtyStat.calc_time_ms = vcpu_calculate_dirtyrate(config.calc_time_ms,
@@ -685,6 +684,7 @@  static void calculate_dirtyrate_sample_vm(struct DirtyRateConfig config)
 
     rcu_read_lock();
     initial_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
+    DirtyStat.start_time = qemu_clock_get_ms(QEMU_CLOCK_HOST) / 1000;
     if (!record_ramblock_hash_info(&block_dinfo, config, &block_count)) {
         goto out;
     }
@@ -692,7 +692,6 @@  static void calculate_dirtyrate_sample_vm(struct DirtyRateConfig config)
 
     DirtyStat.calc_time_ms = dirty_stat_wait(config.calc_time_ms,
                                              initial_time);
-    DirtyStat.start_time = initial_time / 1000;
 
     rcu_read_lock();
     if (!compare_page_hash_info(block_dinfo, block_count)) {
@@ -756,7 +755,6 @@  void qmp_calc_dirty_rate(int64_t calc_time,
     static struct DirtyRateConfig config;
     QemuThread thread;
     int ret;
-    int64_t start_time;
 
     /*
      * If the dirty rate is already being measured, don't attempt to start.
@@ -833,8 +831,7 @@  void qmp_calc_dirty_rate(int64_t calc_time,
      **/
     dirtyrate_mode = mode;
 
-    start_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME) / 1000;
-    init_dirtyrate_stat(start_time, config);
+    init_dirtyrate_stat(config);
 
     qemu_thread_create(&thread, "get_dirtyrate", get_dirtyrate_thread,
                        (void *)&config, QEMU_THREAD_DETACHED);
diff --git a/qapi/migration.json b/qapi/migration.json
index 1717aa4bbd..d8f3bbd7b0 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -1974,13 +1974,13 @@ 
 # 1. Measurement is in progress:
 #
 # <- {"status": "measuring", "sample-pages": 512,
-#     "mode": "page-sampling", "start-time": 3665220, "calc-time": 10,
+#     "mode": "page-sampling", "start-time": 1693900454, "calc-time": 10,
 #     "calc-time-unit": "second"}
 #
 # 2. Measurement has been completed:
 #
 # <- {"status": "measured", "sample-pages": 512, "dirty-rate": 108,
-#     "mode": "page-sampling", "start-time": 3665220, "calc-time": 10,
+#     "mode": "page-sampling", "start-time": 1693900454, "calc-time": 10,
 #     "calc-time-unit": "second"}
 ##
 { 'command': 'query-dirty-rate', 'data': {'*calc-time-unit': 'TimeUnit' },