@@ -81,6 +81,16 @@
do { } while (0)
#endif
+/*
+ * On older Intel CPUs, KVM uses vm86 mode to emulate 16-bit code directly.
+ * In order to use vm86 mode, an EPT identity map and a TSS are needed.
+ * Since these must be part of guest physical memory, we need to allocate
+ * them, both by setting their start addresses in the kernel and by
+ * creating a corresponding e820 entry. We need 4 pages before the BIOS,
+ * so this value allows up to 16M BIOSes.
+ */
+#define KVM_IDENTITY_BASE 0xfeffc000
+
/* From arch/x86/kvm/lapic.h */
#define KVM_APIC_BUS_CYCLE_NS 1
#define KVM_APIC_BUS_FREQUENCY (1000000000ULL / KVM_APIC_BUS_CYCLE_NS)
@@ -3036,18 +3046,9 @@ static int kvm_vm_enable_triple_fault_event(KVMState *s)
return ret;
}
-static int kvm_vm_set_identity_map_addr(KVMState *s, uint64_t *identity_base)
+static int kvm_vm_set_identity_map_addr(KVMState *s, uint64_t identity_base)
{
- /*
- * On older Intel CPUs, KVM uses vm86 mode to emulate 16-bit code directly.
- * In order to use vm86 mode, an EPT identity map and a TSS are needed.
- * Since these must be part of guest physical memory, we need to allocate
- * them, both by setting their start addresses in the kernel and by
- * creating a corresponding e820 entry. We need 4 pages before the BIOS,
- * so this value allows up to 16M BIOSes.
- */
- *identity_base = 0xfeffc000;
- return kvm_vm_ioctl(s, KVM_SET_IDENTITY_MAP_ADDR, identity_base);
+ return kvm_vm_ioctl(s, KVM_SET_IDENTITY_MAP_ADDR, &identity_base);
}
static int kvm_vm_set_nr_mmu_pages(KVMState *s)
@@ -3064,10 +3065,9 @@ static int kvm_vm_set_nr_mmu_pages(KVMState *s)
return ret;
}
-static int kvm_vm_set_tss_addr(KVMState *s, uint64_t identity_base)
+static int kvm_vm_set_tss_addr(KVMState *s, uint64_t tss_base)
{
- /* Set TSS base one page after EPT identity map. */
- return kvm_vm_ioctl(s, KVM_SET_TSS_ADDR, identity_base);
+ return kvm_vm_ioctl(s, KVM_SET_TSS_ADDR, tss_base);
}
static int kvm_vm_enable_disable_exits(KVMState *s)
@@ -3183,7 +3183,6 @@ static void kvm_vm_enable_energy_msrs(KVMState *s)
int kvm_arch_init(MachineState *ms, KVMState *s)
{
- uint64_t identity_base = 0xfffbc000;
int ret;
struct utsname utsname;
Error *local_err = NULL;
@@ -3251,18 +3250,19 @@ int kvm_arch_init(MachineState *ms, KVMState *s)
uname(&utsname);
lm_capable_kernel = strcmp(utsname.machine, "x86_64") == 0;
- ret = kvm_vm_set_identity_map_addr(s, &identity_base);
+ ret = kvm_vm_set_identity_map_addr(s, KVM_IDENTITY_BASE);
if (ret < 0) {
return ret;
}
- ret = kvm_vm_set_tss_addr(s, identity_base + 0x1000);
+ /* Set TSS base one page after EPT identity map. */
+ ret = kvm_vm_set_tss_addr(s, KVM_IDENTITY_BASE + 0x1000);
if (ret < 0) {
return ret;
}
/* Tell fw_cfg to notify the BIOS to reserve the range. */
- e820_add_entry(identity_base, 0x4000, E820_RESERVED);
+ e820_add_entry(KVM_IDENTITY_BASE, 0x4000, E820_RESERVED);
ret = kvm_vm_set_nr_mmu_pages(s);
if (ret < 0) {
identity_base variable is first initialzied to address 0xfffbc000 and then kvm_vm_set_identity_map_addr() overrides this value to address 0xfeffc000. The initial address to which the variable was initialized was never used. Clean everything up, placing 0xfeffc000 in a preprocessor constant. Reported-by: Ani Sinha <anisinha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> --- target/i386/kvm/kvm.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-)