diff mbox series

[PULL,2/7] hw/loongarch/virt: Add FDT table support with acpi ged pm register

Message ID 20240929081724.2139556-3-gaosong@loongson.cn
State New
Headers show
Series [PULL,1/7] acpi: ged: Add macro for acpi sleep control register | expand

Commit Message

Song Gao Sept. 29, 2024, 8:17 a.m. UTC 
From: Bibo Mao <maobibo@loongson.cn>

ACPI ged is used for power management on LoongArch virt platform, in
general it is parsed from acpi table. However if system boot directly from
elf kernel, no UEFI bios is provided and acpi table cannot be used also.

Here acpi ged pm register is exposed with FDT table, it is compatbile
with syscon method in FDT table, only that acpi ged pm register is accessed
with 8-bit mode, rather with 32-bit mode.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Tested-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240918014206.2165821-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
---
 hw/loongarch/virt.c | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)
diff mbox series

Patch

diff --git a/hw/loongarch/virt.c b/hw/loongarch/virt.c
index 75980b6e3c..6e64e1a856 100644
--- a/hw/loongarch/virt.c
+++ b/hw/loongarch/virt.c
@@ -280,6 +280,44 @@  static void fdt_add_rtc_node(LoongArchVirtMachineState *lvms,
     g_free(nodename);
 }
 
+static void fdt_add_ged_reset(LoongArchVirtMachineState *lvms)
+{
+    char *name;
+    uint32_t ged_handle;
+    MachineState *ms = MACHINE(lvms);
+    hwaddr base = VIRT_GED_REG_ADDR;
+    hwaddr size = ACPI_GED_REG_COUNT;
+
+    ged_handle = qemu_fdt_alloc_phandle(ms->fdt);
+    name = g_strdup_printf("/ged@%" PRIx64, base);
+    qemu_fdt_add_subnode(ms->fdt, name);
+    qemu_fdt_setprop_string(ms->fdt, name, "compatible", "syscon");
+    qemu_fdt_setprop_cells(ms->fdt, name, "reg", 0x0, base, 0x0, size);
+    /* 8 bit registers */
+    qemu_fdt_setprop_cell(ms->fdt, name, "reg-shift", 0);
+    qemu_fdt_setprop_cell(ms->fdt, name, "reg-io-width", 1);
+    qemu_fdt_setprop_cell(ms->fdt, name, "phandle", ged_handle);
+    ged_handle = qemu_fdt_get_phandle(ms->fdt, name);
+    g_free(name);
+
+    name = g_strdup_printf("/reboot");
+    qemu_fdt_add_subnode(ms->fdt, name);
+    qemu_fdt_setprop_string(ms->fdt, name, "compatible", "syscon-reboot");
+    qemu_fdt_setprop_cell(ms->fdt, name, "regmap", ged_handle);
+    qemu_fdt_setprop_cell(ms->fdt, name, "offset", ACPI_GED_REG_RESET);
+    qemu_fdt_setprop_cell(ms->fdt, name, "value", ACPI_GED_RESET_VALUE);
+    g_free(name);
+
+    name = g_strdup_printf("/poweroff");
+    qemu_fdt_add_subnode(ms->fdt, name);
+    qemu_fdt_setprop_string(ms->fdt, name, "compatible", "syscon-poweroff");
+    qemu_fdt_setprop_cell(ms->fdt, name, "regmap", ged_handle);
+    qemu_fdt_setprop_cell(ms->fdt, name, "offset", ACPI_GED_REG_SLEEP_CTL);
+    qemu_fdt_setprop_cell(ms->fdt, name, "value", ACPI_GED_SLP_EN |
+                          (ACPI_GED_SLP_TYP_S5 << ACPI_GED_SLP_TYP_POS));
+    g_free(name);
+}
+
 static void fdt_add_uart_node(LoongArchVirtMachineState *lvms,
                               uint32_t *pch_pic_phandle, hwaddr base,
                               int irq, bool chosen)
@@ -737,6 +775,7 @@  static void virt_devices_init(DeviceState *pch_pic,
                          qdev_get_gpio_in(pch_pic,
                          VIRT_RTC_IRQ - VIRT_GSI_BASE));
     fdt_add_rtc_node(lvms, pch_pic_phandle);
+    fdt_add_ged_reset(lvms);
 
     /* acpi ged */
     lvms->acpi_ged = create_acpi_ged(pch_pic, lvms);