@@ -879,6 +879,7 @@ F: hw/arm/nseries.c
F: hw/display/blizzard.c
F: hw/input/lm832x.c
F: hw/input/tsc2005.c
+F: hw/input/tsc210x.c
F: hw/misc/cbus.c
F: hw/rtc/twl92230.c
F: include/hw/display/blizzard.h
@@ -888,15 +889,6 @@ F: include/hw/misc/cbus.h
F: tests/avocado/machine_arm_n8x0.py
F: docs/system/arm/nseries.rst
-Palm
-M: Peter Maydell <peter.maydell@linaro.org>
-L: qemu-arm@nongnu.org
-S: Odd Fixes
-F: hw/arm/palm.c
-F: hw/input/tsc210x.c
-F: include/hw/input/tsc2xxx.h
-F: docs/system/arm/palm.rst
-
Raspberry Pi
M: Peter Maydell <peter.maydell@linaro.org>
R: Philippe Mathieu-Daudé <philmd@linaro.org>
deleted file mode 100644
@@ -1,23 +0,0 @@
-Palm Tungsten|E PDA (``cheetah``)
-=================================
-
-The Palm Tungsten|E PDA (codename \"Cheetah\") emulation includes the
-following elements:
-
-- Texas Instruments OMAP310 System-on-chip (ARM925T core)
-
-- ROM and RAM memories (ROM firmware image can be loaded with
- -option-rom)
-
-- On-chip LCD controller
-
-- On-chip Real Time Clock
-
-- TI TSC2102i touchscreen controller / analog-digital converter /
- Audio CODEC, connected through MicroWire and |I2S| buses
-
-- GPIO-connected matrix keypad
-
-- Secure Digital card connected to OMAP MMC/SD host
-
-- Three on-chip UARTs
@@ -99,7 +99,6 @@ undocumented; you can get a complete list by running
arm/nuvoton
arm/imx25-pdk
arm/orangepi
- arm/palm
arm/raspi
arm/collie
arm/sx1
@@ -18,7 +18,6 @@
# CONFIG_MUSICPAL=n
# CONFIG_MPS3R=n
# CONFIG_MUSCA=n
-# CONFIG_CHEETAH=n
# CONFIG_SX1=n
# CONFIG_NSERIES=n
# CONFIG_STELLARIS=n
deleted file mode 100644
@@ -1,324 +0,0 @@
-/*
- * PalmOne's (TM) PDAs.
- *
- * Copyright (C) 2006-2007 Andrzej Zaborowski <balrog@zabor.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 or
- * (at your option) version 3 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "qemu/osdep.h"
-#include "qapi/error.h"
-#include "audio/audio.h"
-#include "sysemu/sysemu.h"
-#include "sysemu/qtest.h"
-#include "ui/console.h"
-#include "hw/arm/omap.h"
-#include "hw/boards.h"
-#include "hw/arm/boot.h"
-#include "hw/input/tsc2xxx.h"
-#include "hw/irq.h"
-#include "hw/loader.h"
-#include "qemu/cutils.h"
-#include "qom/object.h"
-#include "qemu/error-report.h"
-
-
-static uint64_t static_read(void *opaque, hwaddr offset, unsigned size)
-{
- uint32_t *val = (uint32_t *)opaque;
- uint32_t sizemask = 7 >> size;
-
- return *val >> ((offset & sizemask) << 3);
-}
-
-static void static_write(void *opaque, hwaddr offset, uint64_t value,
- unsigned size)
-{
-#ifdef SPY
- printf("%s: value %08lx written at " PA_FMT "\n",
- __func__, value, offset);
-#endif
-}
-
-static const MemoryRegionOps static_ops = {
- .read = static_read,
- .write = static_write,
- .valid.min_access_size = 1,
- .valid.max_access_size = 4,
- .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-/* Palm Tunsgten|E support */
-
-/* Shared GPIOs */
-#define PALMTE_USBDETECT_GPIO 0
-#define PALMTE_USB_OR_DC_GPIO 1
-#define PALMTE_TSC_GPIO 4
-#define PALMTE_PINTDAV_GPIO 6
-#define PALMTE_MMC_WP_GPIO 8
-#define PALMTE_MMC_POWER_GPIO 9
-#define PALMTE_HDQ_GPIO 11
-#define PALMTE_HEADPHONES_GPIO 14
-#define PALMTE_SPEAKER_GPIO 15
-/* MPU private GPIOs */
-#define PALMTE_DC_GPIO 2
-#define PALMTE_MMC_SWITCH_GPIO 4
-#define PALMTE_MMC1_GPIO 6
-#define PALMTE_MMC2_GPIO 7
-#define PALMTE_MMC3_GPIO 11
-
-static MouseTransformInfo palmte_pointercal = {
- .x = 320,
- .y = 320,
- .a = { -5909, 8, 22465308, 104, 7644, -1219972, 65536 },
-};
-
-static void palmte_microwire_setup(struct omap_mpu_state_s *cpu)
-{
- uWireSlave *tsc;
-
- tsc = tsc2102_init(qdev_get_gpio_in(cpu->gpio, PALMTE_PINTDAV_GPIO));
-
- omap_uwire_attach(cpu->microwire, tsc, 0);
- omap_mcbsp_i2s_attach(cpu->mcbsp1, tsc210x_codec(tsc));
-
- tsc210x_set_transform(tsc, &palmte_pointercal);
-}
-
-static struct {
- int row;
- int column;
-} palmte_keymap[0x80] = {
- [0 ... 0x7f] = { -1, -1 },
- [0x3b] = { 0, 0 }, /* F1 -> Calendar */
- [0x3c] = { 1, 0 }, /* F2 -> Contacts */
- [0x3d] = { 2, 0 }, /* F3 -> Tasks List */
- [0x3e] = { 3, 0 }, /* F4 -> Note Pad */
- [0x01] = { 4, 0 }, /* Esc -> Power */
- [0x4b] = { 0, 1 }, /* Left */
- [0x50] = { 1, 1 }, /* Down */
- [0x48] = { 2, 1 }, /* Up */
- [0x4d] = { 3, 1 }, /* Right */
- [0x4c] = { 4, 1 }, /* Centre */
- [0x39] = { 4, 1 }, /* Spc -> Centre */
-};
-
-static void palmte_button_event(void *opaque, int keycode)
-{
- struct omap_mpu_state_s *cpu = opaque;
-
- if (palmte_keymap[keycode & 0x7f].row != -1)
- omap_mpuio_key(cpu->mpuio,
- palmte_keymap[keycode & 0x7f].row,
- palmte_keymap[keycode & 0x7f].column,
- !(keycode & 0x80));
-}
-
-/*
- * Encapsulation of some GPIO line behaviour for the Palm board
- *
- * QEMU interface:
- * + unnamed GPIO inputs 0..6: for the various miscellaneous input lines
- */
-
-#define TYPE_PALM_MISC_GPIO "palm-misc-gpio"
-OBJECT_DECLARE_SIMPLE_TYPE(PalmMiscGPIOState, PALM_MISC_GPIO)
-
-struct PalmMiscGPIOState {
- SysBusDevice parent_obj;
-};
-
-static void palmte_onoff_gpios(void *opaque, int line, int level)
-{
- switch (line) {
- case 0:
- printf("%s: current to MMC/SD card %sabled.\n",
- __func__, level ? "dis" : "en");
- break;
- case 1:
- printf("%s: internal speaker amplifier %s.\n",
- __func__, level ? "down" : "on");
- break;
-
- /* These LCD & Audio output signals have not been identified yet. */
- case 2:
- case 3:
- case 4:
- printf("%s: LCD GPIO%i %s.\n",
- __func__, line - 1, level ? "high" : "low");
- break;
- case 5:
- case 6:
- printf("%s: Audio GPIO%i %s.\n",
- __func__, line - 4, level ? "high" : "low");
- break;
- }
-}
-
-static void palm_misc_gpio_init(Object *obj)
-{
- DeviceState *dev = DEVICE(obj);
-
- qdev_init_gpio_in(dev, palmte_onoff_gpios, 7);
-}
-
-static const TypeInfo palm_misc_gpio_info = {
- .name = TYPE_PALM_MISC_GPIO,
- .parent = TYPE_SYS_BUS_DEVICE,
- .instance_size = sizeof(PalmMiscGPIOState),
- .instance_init = palm_misc_gpio_init,
- /*
- * No class init required: device has no internal state so does not
- * need to set up reset or vmstate, and has no realize method.
- */
-};
-
-static void palmte_gpio_setup(struct omap_mpu_state_s *cpu)
-{
- DeviceState *misc_gpio;
-
- misc_gpio = sysbus_create_simple(TYPE_PALM_MISC_GPIO, -1, NULL);
-
- omap_mmc_handlers(cpu->mmc,
- qdev_get_gpio_in(cpu->gpio, PALMTE_MMC_WP_GPIO),
- qemu_irq_invert(omap_mpuio_in_get(cpu->mpuio)
- [PALMTE_MMC_SWITCH_GPIO]));
-
- qdev_connect_gpio_out(cpu->gpio, PALMTE_MMC_POWER_GPIO,
- qdev_get_gpio_in(misc_gpio, 0));
- qdev_connect_gpio_out(cpu->gpio, PALMTE_SPEAKER_GPIO,
- qdev_get_gpio_in(misc_gpio, 1));
- qdev_connect_gpio_out(cpu->gpio, 11, qdev_get_gpio_in(misc_gpio, 2));
- qdev_connect_gpio_out(cpu->gpio, 12, qdev_get_gpio_in(misc_gpio, 3));
- qdev_connect_gpio_out(cpu->gpio, 13, qdev_get_gpio_in(misc_gpio, 4));
- omap_mpuio_out_set(cpu->mpuio, 1, qdev_get_gpio_in(misc_gpio, 5));
- omap_mpuio_out_set(cpu->mpuio, 3, qdev_get_gpio_in(misc_gpio, 6));
-
- /* Reset some inputs to initial state. */
- qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_USBDETECT_GPIO));
- qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_USB_OR_DC_GPIO));
- qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, 4));
- qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_HEADPHONES_GPIO));
- qemu_irq_lower(omap_mpuio_in_get(cpu->mpuio)[PALMTE_DC_GPIO]);
- qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[6]);
- qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[7]);
- qemu_irq_raise(omap_mpuio_in_get(cpu->mpuio)[11]);
-}
-
-static struct arm_boot_info palmte_binfo = {
- .loader_start = OMAP_EMIFF_BASE,
- .ram_size = 0x02000000,
- .board_id = 0x331,
-};
-
-static void palmte_init(MachineState *machine)
-{
- MemoryRegion *address_space_mem = get_system_memory();
- struct omap_mpu_state_s *mpu;
- int flash_size = 0x00800000;
- static uint32_t cs0val = 0xffffffff;
- static uint32_t cs1val = 0x0000e1a0;
- static uint32_t cs2val = 0x0000e1a0;
- static uint32_t cs3val = 0xe1a0e1a0;
- int rom_size, rom_loaded = 0;
- MachineClass *mc = MACHINE_GET_CLASS(machine);
- MemoryRegion *flash = g_new(MemoryRegion, 1);
- MemoryRegion *cs = g_new(MemoryRegion, 4);
-
- if (machine->ram_size != mc->default_ram_size) {
- char *sz = size_to_str(mc->default_ram_size);
- error_report("Invalid RAM size, should be %s", sz);
- g_free(sz);
- exit(EXIT_FAILURE);
- }
-
- memory_region_add_subregion(address_space_mem, OMAP_EMIFF_BASE,
- machine->ram);
-
- mpu = omap310_mpu_init(machine->ram, machine->cpu_type);
-
- /* External Flash (EMIFS) */
- memory_region_init_rom(flash, NULL, "palmte.flash", flash_size,
- &error_fatal);
- memory_region_add_subregion(address_space_mem, OMAP_CS0_BASE, flash);
-
- memory_region_init_io(&cs[0], NULL, &static_ops, &cs0val, "palmte-cs0",
- OMAP_CS0_SIZE - flash_size);
- memory_region_add_subregion(address_space_mem, OMAP_CS0_BASE + flash_size,
- &cs[0]);
- memory_region_init_io(&cs[1], NULL, &static_ops, &cs1val, "palmte-cs1",
- OMAP_CS1_SIZE);
- memory_region_add_subregion(address_space_mem, OMAP_CS1_BASE, &cs[1]);
- memory_region_init_io(&cs[2], NULL, &static_ops, &cs2val, "palmte-cs2",
- OMAP_CS2_SIZE);
- memory_region_add_subregion(address_space_mem, OMAP_CS2_BASE, &cs[2]);
- memory_region_init_io(&cs[3], NULL, &static_ops, &cs3val, "palmte-cs3",
- OMAP_CS3_SIZE);
- memory_region_add_subregion(address_space_mem, OMAP_CS3_BASE, &cs[3]);
-
- palmte_microwire_setup(mpu);
-
- qemu_add_kbd_event_handler(palmte_button_event, mpu);
-
- palmte_gpio_setup(mpu);
-
- /* Setup initial (reset) machine state */
- if (nb_option_roms) {
- rom_size = get_image_size(option_rom[0].name);
- if (rom_size > flash_size) {
- fprintf(stderr, "%s: ROM image too big (%x > %x)\n",
- __func__, rom_size, flash_size);
- rom_size = 0;
- }
- if (rom_size > 0) {
- rom_size = load_image_targphys(option_rom[0].name, OMAP_CS0_BASE,
- flash_size);
- rom_loaded = 1;
- }
- if (rom_size < 0) {
- fprintf(stderr, "%s: error loading '%s'\n",
- __func__, option_rom[0].name);
- }
- }
-
- if (!rom_loaded && !machine->kernel_filename && !qtest_enabled()) {
- fprintf(stderr, "Kernel or ROM image must be specified\n");
- exit(1);
- }
-
- /* Load the kernel. */
- arm_load_kernel(mpu->cpu, machine, &palmte_binfo);
-}
-
-static void palmte_machine_init(MachineClass *mc)
-{
- mc->desc = "Palm Tungsten|E aka. Cheetah PDA (OMAP310)";
- mc->init = palmte_init;
- mc->ignore_memory_transaction_failures = true;
- mc->default_cpu_type = ARM_CPU_TYPE_NAME("ti925t");
- mc->default_ram_size = 0x02000000;
- mc->default_ram_id = "omap1.dram";
- mc->deprecation_reason = "machine is old and unmaintained";
-
- machine_add_audiodev_property(mc);
-}
-
-DEFINE_MACHINE("cheetah", palmte_machine_init)
-
-static void palm_register_types(void)
-{
- type_register_static(&palm_misc_gpio_info);
-}
-
-type_init(palm_register_types)
@@ -37,13 +37,6 @@ config ARM_VIRT
select ACPI_CXL
select ACPI_HMAT
-config CHEETAH
- bool
- default y
- depends on TCG && ARM
- select OMAP
- select TSC210X
-
config CUBIEBOARD
bool
default y
@@ -62,7 +62,6 @@ arm_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('nrf51_soc.c'))
arm_ss.add(when: 'CONFIG_XEN', if_true: files('xen_arm.c'))
system_ss.add(when: 'CONFIG_ARM_SMMUV3', if_true: files('smmu-common.c'))
-system_ss.add(when: 'CONFIG_CHEETAH', if_true: files('palm.c'))
system_ss.add(when: 'CONFIG_COLLIE', if_true: files('collie.c'))
system_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4_boards.c'))
system_ss.add(when: 'CONFIG_GUMSTIX', if_true: files('gumstix.c'))
The 'cheetah' machine has been deprecated since 9.0, so we can remove it for the 9.2 release. (tsc210x.c is also used by nseries, so move its MAINTAINER file line there; the nseries boards are also about to be removed.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 10 +- docs/system/arm/palm.rst | 23 -- docs/system/target-arm.rst | 1 - configs/devices/arm-softmmu/default.mak | 1 - hw/arm/palm.c | 324 ------------------------ hw/arm/Kconfig | 7 - hw/arm/meson.build | 1 - 7 files changed, 1 insertion(+), 366 deletions(-) delete mode 100644 docs/system/arm/palm.rst delete mode 100644 hw/arm/palm.c