diff --git a/MAINTAINERS b/MAINTAINERS
index 6d7248ad022..e44b6eb38b0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -868,10 +868,8 @@ M: Peter Maydell <peter.maydell@linaro.org>
 L: qemu-arm@nongnu.org
 S: Odd Fixes
 F: hw/input/lm832x.c
-F: hw/input/tsc210x.c
 F: hw/rtc/twl92230.c
 F: include/hw/input/lm832x.h
-F: include/hw/input/tsc2xxx.h
 
 Raspberry Pi
 M: Peter Maydell <peter.maydell@linaro.org>
diff --git a/include/hw/arm/omap.h b/include/hw/arm/omap.h
index 40ee8ea9e56..0ca7c9604e7 100644
--- a/include/hw/arm/omap.h
+++ b/include/hw/arm/omap.h
@@ -21,7 +21,6 @@
 #define HW_ARM_OMAP_H
 
 #include "exec/memory.h"
-#include "hw/input/tsc2xxx.h"
 #include "target/arm/cpu-qom.h"
 #include "qemu/log.h"
 #include "qom/object.h"
@@ -730,6 +729,12 @@ qemu_irq *omap_mpuio_in_get(struct omap_mpuio_s *s);
 void omap_mpuio_out_set(struct omap_mpuio_s *s, int line, qemu_irq handler);
 void omap_mpuio_key(struct omap_mpuio_s *s, int row, int col, int down);
 
+typedef struct uWireSlave {
+    uint16_t (*receive)(void *opaque);
+    void (*send)(void *opaque, uint16_t data);
+    void *opaque;
+} uWireSlave;
+
 struct omap_uwire_s;
 void omap_uwire_attach(struct omap_uwire_s *s,
                 uWireSlave *slave, int chipselect);
diff --git a/include/hw/input/tsc2xxx.h b/include/hw/input/tsc2xxx.h
deleted file mode 100644
index dcd4fa7faed..00000000000
--- a/include/hw/input/tsc2xxx.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * TI touchscreen controller
- *
- * Copyright (c) 2006 Andrzej Zaborowski
- * Copyright (C) 2008 Nokia Corporation
- *
- * This work is licensed under the terms of the GNU GPL, version 2 or later.
- * See the COPYING file in the top-level directory.
- */
-
-#ifndef HW_INPUT_TSC2XXX_H
-#define HW_INPUT_TSC2XXX_H
-
-typedef struct MouseTransformInfo {
-    /* Touchscreen resolution */
-    int x;
-    int y;
-    /* Calibration values as used/generated by tslib */
-    int a[7];
-} MouseTransformInfo;
-
-typedef struct uWireSlave {
-    uint16_t (*receive)(void *opaque);
-    void (*send)(void *opaque, uint16_t data);
-    void *opaque;
-} uWireSlave;
-
-/* tsc210x.c */
-uWireSlave *tsc2102_init(qemu_irq pint);
-uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav);
-I2SCodec *tsc210x_codec(uWireSlave *chip);
-uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len);
-void tsc210x_set_transform(uWireSlave *chip, const MouseTransformInfo *info);
-void tsc210x_key_event(uWireSlave *chip, int key, int down);
-
-#endif
diff --git a/hw/input/tsc210x.c b/hw/input/tsc210x.c
deleted file mode 100644
index c4e32c7a42f..00000000000
--- a/hw/input/tsc210x.c
+++ /dev/null
@@ -1,1241 +0,0 @@
-/*
- * TI TSC2102 (touchscreen/sensors/audio controller) emulator.
- * TI TSC2301 (touchscreen/sensors/keypad).
- *
- * Copyright (c) 2006 Andrzej Zaborowski  <balrog@zabor.org>
- * Copyright (C) 2008 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 or
- * (at your option) version 3 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "qemu/osdep.h"
-#include "hw/hw.h"
-#include "audio/audio.h"
-#include "qemu/timer.h"
-#include "qemu/log.h"
-#include "sysemu/reset.h"
-#include "ui/console.h"
-#include "hw/arm/omap.h"            /* For I2SCodec */
-#include "hw/boards.h"              /* for current_machine */
-#include "hw/input/tsc2xxx.h"
-#include "hw/irq.h"
-#include "migration/vmstate.h"
-#include "qapi/error.h"
-
-#define TSC_DATA_REGISTERS_PAGE		0x0
-#define TSC_CONTROL_REGISTERS_PAGE	0x1
-#define TSC_AUDIO_REGISTERS_PAGE	0x2
-
-#define TSC_VERBOSE
-
-#define TSC_CUT_RESOLUTION(value, p)	((value) >> (16 - resolution[p]))
-
-typedef struct {
-    qemu_irq pint;
-    qemu_irq kbint;
-    qemu_irq davint;
-    QEMUTimer *timer;
-    QEMUSoundCard card;
-    uWireSlave chip;
-    I2SCodec codec;
-    uint8_t in_fifo[16384];
-    uint8_t out_fifo[16384];
-    uint16_t model;
-
-    int32_t x, y;
-    bool pressure;
-
-    uint8_t page, offset;
-    uint16_t dav;
-
-    bool state;
-    bool irq;
-    bool command;
-    bool busy;
-    bool enabled;
-    bool host_mode;
-    uint8_t function, nextfunction;
-    uint8_t precision, nextprecision;
-    uint8_t filter;
-    uint8_t pin_func;
-    uint8_t ref;
-    uint8_t timing;
-    uint8_t noise;
-
-    uint16_t audio_ctrl1;
-    uint16_t audio_ctrl2;
-    uint16_t audio_ctrl3;
-    uint16_t pll[3];
-    uint16_t volume;
-    int64_t volume_change;
-    bool softstep;
-    uint16_t dac_power;
-    int64_t powerdown;
-    uint16_t filter_data[0x14];
-
-    const char *name;
-    SWVoiceIn *adc_voice[1];
-    SWVoiceOut *dac_voice[1];
-    int i2s_rx_rate;
-    int i2s_tx_rate;
-
-    int tr[8];
-
-    struct {
-        uint16_t down;
-        uint16_t mask;
-        int scan;
-        int debounce;
-        int mode;
-        int intr;
-    } kb;
-    int64_t now; /* Time at migration */
-} TSC210xState;
-
-static const int resolution[4] = { 12, 8, 10, 12 };
-
-#define TSC_MODE_NO_SCAN	0x0
-#define TSC_MODE_XY_SCAN	0x1
-#define TSC_MODE_XYZ_SCAN	0x2
-#define TSC_MODE_X		0x3
-#define TSC_MODE_Y		0x4
-#define TSC_MODE_Z		0x5
-#define TSC_MODE_BAT1		0x6
-#define TSC_MODE_BAT2		0x7
-#define TSC_MODE_AUX		0x8
-#define TSC_MODE_AUX_SCAN	0x9
-#define TSC_MODE_TEMP1		0xa
-#define TSC_MODE_PORT_SCAN	0xb
-#define TSC_MODE_TEMP2		0xc
-#define TSC_MODE_XX_DRV		0xd
-#define TSC_MODE_YY_DRV		0xe
-#define TSC_MODE_YX_DRV		0xf
-
-static const uint16_t mode_regs[16] = {
-    0x0000,	/* No scan */
-    0x0600,	/* X, Y scan */
-    0x0780,	/* X, Y, Z scan */
-    0x0400,	/* X */
-    0x0200,	/* Y */
-    0x0180,	/* Z */
-    0x0040,	/* BAT1 */
-    0x0030,	/* BAT2 */
-    0x0010,	/* AUX */
-    0x0010,	/* AUX scan */
-    0x0004,	/* TEMP1 */
-    0x0070,	/* Port scan */
-    0x0002,	/* TEMP2 */
-    0x0000,	/* X+, X- drivers */
-    0x0000,	/* Y+, Y- drivers */
-    0x0000,	/* Y+, X- drivers */
-};
-
-#define X_TRANSFORM(s)			\
-    ((s->y * s->tr[0] - s->x * s->tr[1]) / s->tr[2] + s->tr[3])
-#define Y_TRANSFORM(s)			\
-    ((s->y * s->tr[4] - s->x * s->tr[5]) / s->tr[6] + s->tr[7])
-#define Z1_TRANSFORM(s)			\
-    ((400 - ((s)->x >> 7) + ((s)->pressure << 10)) << 4)
-#define Z2_TRANSFORM(s)			\
-    ((4000 + ((s)->y >> 7) - ((s)->pressure << 10)) << 4)
-
-#define BAT1_VAL			0x8660
-#define BAT2_VAL			0x0000
-#define AUX1_VAL			0x35c0
-#define AUX2_VAL			0xffff
-#define TEMP1_VAL			0x8c70
-#define TEMP2_VAL			0xa5b0
-
-#define TSC_POWEROFF_DELAY		50
-#define TSC_SOFTSTEP_DELAY		50
-
-static void tsc210x_reset(TSC210xState *s)
-{
-    s->state = false;
-    s->pin_func = 2;
-    s->enabled = false;
-    s->busy = false;
-    s->nextfunction = 0;
-    s->ref = 0;
-    s->timing = 0;
-    s->irq = false;
-    s->dav = 0;
-
-    s->audio_ctrl1 = 0x0000;
-    s->audio_ctrl2 = 0x4410;
-    s->audio_ctrl3 = 0x0000;
-    s->pll[0] = 0x1004;
-    s->pll[1] = 0x0000;
-    s->pll[2] = 0x1fff;
-    s->volume = 0xffff;
-    s->dac_power = 0x8540;
-    s->softstep = true;
-    s->volume_change = 0;
-    s->powerdown = 0;
-    s->filter_data[0x00] = 0x6be3;
-    s->filter_data[0x01] = 0x9666;
-    s->filter_data[0x02] = 0x675d;
-    s->filter_data[0x03] = 0x6be3;
-    s->filter_data[0x04] = 0x9666;
-    s->filter_data[0x05] = 0x675d;
-    s->filter_data[0x06] = 0x7d83;
-    s->filter_data[0x07] = 0x84ee;
-    s->filter_data[0x08] = 0x7d83;
-    s->filter_data[0x09] = 0x84ee;
-    s->filter_data[0x0a] = 0x6be3;
-    s->filter_data[0x0b] = 0x9666;
-    s->filter_data[0x0c] = 0x675d;
-    s->filter_data[0x0d] = 0x6be3;
-    s->filter_data[0x0e] = 0x9666;
-    s->filter_data[0x0f] = 0x675d;
-    s->filter_data[0x10] = 0x7d83;
-    s->filter_data[0x11] = 0x84ee;
-    s->filter_data[0x12] = 0x7d83;
-    s->filter_data[0x13] = 0x84ee;
-
-    s->i2s_tx_rate = 0;
-    s->i2s_rx_rate = 0;
-
-    s->kb.scan = 1;
-    s->kb.debounce = 0;
-    s->kb.mask = 0x0000;
-    s->kb.mode = 3;
-    s->kb.intr = 0;
-
-    qemu_set_irq(s->pint, !s->irq);
-    qemu_set_irq(s->davint, !s->dav);
-    qemu_irq_raise(s->kbint);
-}
-
-typedef struct {
-    int rate;
-    int dsor;
-    int fsref;
-} TSC210xRateInfo;
-
-/*  { rate,   dsor, fsref }	*/
-static const TSC210xRateInfo tsc2102_rates[] = {
-    /* Fsref / 6.0 */
-    { 7350,	63,	1 },
-    { 8000,	63,	0 },
-    /* Fsref / 6.0 */
-    { 7350,	54,	1 },
-    { 8000,	54,	0 },
-    /* Fsref / 5.0 */
-    { 8820,	45,	1 },
-    { 9600,	45,	0 },
-    /* Fsref / 4.0 */
-    { 11025,	36,	1 },
-    { 12000,	36,	0 },
-    /* Fsref / 3.0 */
-    { 14700,	27,	1 },
-    { 16000,	27,	0 },
-    /* Fsref / 2.0 */
-    { 22050,	18,	1 },
-    { 24000,	18,	0 },
-    /* Fsref / 1.5 */
-    { 29400,	9,	1 },
-    { 32000,	9,	0 },
-    /* Fsref */
-    { 44100,	0,	1 },
-    { 48000,	0,	0 },
-
-    { 0,	0, 	0 },
-};
-
-static inline void tsc210x_out_flush(TSC210xState *s, int len)
-{
-    uint8_t *data = s->codec.out.fifo + s->codec.out.start;
-    uint8_t *end = data + len;
-
-    while (data < end)
-        data += AUD_write(s->dac_voice[0], data, end - data) ?: (end - data);
-
-    s->codec.out.len -= len;
-    if (s->codec.out.len)
-        memmove(s->codec.out.fifo, end, s->codec.out.len);
-    s->codec.out.start = 0;
-}
-
-static void tsc210x_audio_out_cb(TSC210xState *s, int free_b)
-{
-    if (s->codec.out.len >= free_b) {
-        tsc210x_out_flush(s, free_b);
-        return;
-    }
-
-    s->codec.out.size = MIN(free_b, 16384);
-    qemu_irq_raise(s->codec.tx_start);
-}
-
-static void tsc2102_audio_rate_update(TSC210xState *s)
-{
-    const TSC210xRateInfo *rate;
-
-    s->codec.tx_rate = 0;
-    s->codec.rx_rate = 0;
-    if (s->dac_power & (1 << 15))				/* PWDNC */
-        return;
-
-    for (rate = tsc2102_rates; rate->rate; rate ++)
-        if (rate->dsor == (s->audio_ctrl1 & 0x3f) &&		/* DACFS */
-                        rate->fsref == ((s->audio_ctrl3 >> 13) & 1))/* REFFS */
-            break;
-    if (!rate->rate) {
-        printf("%s: unknown sampling rate configured\n", __func__);
-        return;
-    }
-
-    s->codec.tx_rate = rate->rate;
-}
-
-static void tsc2102_audio_output_update(TSC210xState *s)
-{
-    int enable;
-    struct audsettings fmt;
-
-    if (s->dac_voice[0]) {
-        tsc210x_out_flush(s, s->codec.out.len);
-        s->codec.out.size = 0;
-        AUD_set_active_out(s->dac_voice[0], 0);
-        AUD_close_out(&s->card, s->dac_voice[0]);
-        s->dac_voice[0] = NULL;
-    }
-    s->codec.cts = 0;
-
-    enable =
-            (~s->dac_power & (1 << 15)) &&			/* PWDNC */
-            (~s->dac_power & (1 << 10));			/* DAPWDN */
-    if (!enable || !s->codec.tx_rate)
-        return;
-
-    /* Force our own sampling rate even in slave DAC mode */
-    fmt.endianness = 0;
-    fmt.nchannels = 2;
-    fmt.freq = s->codec.tx_rate;
-    fmt.fmt = AUDIO_FORMAT_S16;
-
-    s->dac_voice[0] = AUD_open_out(&s->card, s->dac_voice[0],
-                    "tsc2102.sink", s, (void *) tsc210x_audio_out_cb, &fmt);
-    if (s->dac_voice[0]) {
-        s->codec.cts = 1;
-        AUD_set_active_out(s->dac_voice[0], 1);
-    }
-}
-
-static uint16_t tsc2102_data_register_read(TSC210xState *s, int reg)
-{
-    switch (reg) {
-    case 0x00:	/* X */
-        s->dav &= 0xfbff;
-        return TSC_CUT_RESOLUTION(X_TRANSFORM(s), s->precision) +
-                (s->noise & 3);
-
-    case 0x01:	/* Y */
-        s->noise ++;
-        s->dav &= 0xfdff;
-        return TSC_CUT_RESOLUTION(Y_TRANSFORM(s), s->precision) ^
-                (s->noise & 3);
-
-    case 0x02:	/* Z1 */
-        s->dav &= 0xfeff;
-        return TSC_CUT_RESOLUTION(Z1_TRANSFORM(s), s->precision) -
-                (s->noise & 3);
-
-    case 0x03:	/* Z2 */
-        s->dav &= 0xff7f;
-        return TSC_CUT_RESOLUTION(Z2_TRANSFORM(s), s->precision) |
-                (s->noise & 3);
-
-    case 0x04:	/* KPData */
-        if ((s->model & 0xff00) == 0x2300) {
-            if (s->kb.intr && (s->kb.mode & 2)) {
-                s->kb.intr = 0;
-                qemu_irq_raise(s->kbint);
-            }
-            return s->kb.down;
-        }
-
-        return 0xffff;
-
-    case 0x05:	/* BAT1 */
-        s->dav &= 0xffbf;
-        return TSC_CUT_RESOLUTION(BAT1_VAL, s->precision) +
-                (s->noise & 6);
-
-    case 0x06:	/* BAT2 */
-        s->dav &= 0xffdf;
-        return TSC_CUT_RESOLUTION(BAT2_VAL, s->precision);
-
-    case 0x07:	/* AUX1 */
-        s->dav &= 0xffef;
-        return TSC_CUT_RESOLUTION(AUX1_VAL, s->precision);
-
-    case 0x08:	/* AUX2 */
-        s->dav &= 0xfff7;
-        return 0xffff;
-
-    case 0x09:	/* TEMP1 */
-        s->dav &= 0xfffb;
-        return TSC_CUT_RESOLUTION(TEMP1_VAL, s->precision) -
-                (s->noise & 5);
-
-    case 0x0a:	/* TEMP2 */
-        s->dav &= 0xfffd;
-        return TSC_CUT_RESOLUTION(TEMP2_VAL, s->precision) ^
-                (s->noise & 3);
-
-    case 0x0b:	/* DAC */
-        s->dav &= 0xfffe;
-        return 0xffff;
-
-    default:
-#ifdef TSC_VERBOSE
-        fprintf(stderr, "tsc2102_data_register_read: "
-                        "no such register: 0x%02x\n", reg);
-#endif
-        return 0xffff;
-    }
-}
-
-static uint16_t tsc2102_control_register_read(
-                TSC210xState *s, int reg)
-{
-    switch (reg) {
-    case 0x00:	/* TSC ADC */
-        return (s->pressure << 15) | ((!s->busy) << 14) |
-                (s->nextfunction << 10) | (s->nextprecision << 8) | s->filter; 
-
-    case 0x01:	/* Status / Keypad Control */
-        if ((s->model & 0xff00) == 0x2100)
-            return (s->pin_func << 14) | ((!s->enabled) << 13) |
-                    (s->host_mode << 12) | ((!!s->dav) << 11) | s->dav;
-        else
-            return (s->kb.intr << 15) | ((s->kb.scan || !s->kb.down) << 14) |
-                    (s->kb.debounce << 11);
-
-    case 0x02:	/* DAC Control */
-        if ((s->model & 0xff00) == 0x2300)
-            return s->dac_power & 0x8000;
-        else
-            goto bad_reg;
-
-    case 0x03:	/* Reference */
-        return s->ref;
-
-    case 0x04:	/* Reset */
-        return 0xffff;
-
-    case 0x05:	/* Configuration */
-        return s->timing;
-
-    case 0x06:	/* Secondary configuration */
-        if ((s->model & 0xff00) == 0x2100)
-            goto bad_reg;
-        return ((!s->dav) << 15) | ((s->kb.mode & 1) << 14) | s->pll[2];
-
-    case 0x10:	/* Keypad Mask */
-        if ((s->model & 0xff00) == 0x2100)
-            goto bad_reg;
-        return s->kb.mask;
-
-    default:
-    bad_reg:
-#ifdef TSC_VERBOSE
-        fprintf(stderr, "tsc2102_control_register_read: "
-                        "no such register: 0x%02x\n", reg);
-#endif
-        return 0xffff;
-    }
-}
-
-static uint16_t tsc2102_audio_register_read(TSC210xState *s, int reg)
-{
-    int l_ch, r_ch;
-    uint16_t val;
-
-    switch (reg) {
-    case 0x00:	/* Audio Control 1 */
-        return s->audio_ctrl1;
-
-    case 0x01:
-        return 0xff00;
-
-    case 0x02:	/* DAC Volume Control */
-        return s->volume;
-
-    case 0x03:
-        return 0x8b00;
-
-    case 0x04:	/* Audio Control 2 */
-        l_ch = 1;
-        r_ch = 1;
-        if (s->softstep && !(s->dac_power & (1 << 10))) {
-            l_ch = (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) >
-                            s->volume_change + TSC_SOFTSTEP_DELAY);
-            r_ch = (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) >
-                            s->volume_change + TSC_SOFTSTEP_DELAY);
-        }
-
-        return s->audio_ctrl2 | (l_ch << 3) | (r_ch << 2);
-
-    case 0x05:	/* Stereo DAC Power Control */
-        return 0x2aa0 | s->dac_power |
-                (((s->dac_power & (1 << 10)) &&
-                  (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) >
-                   s->powerdown + TSC_POWEROFF_DELAY)) << 6);
-
-    case 0x06:	/* Audio Control 3 */
-        val = s->audio_ctrl3 | 0x0001;
-        s->audio_ctrl3 &= 0xff3f;
-        return val;
-
-    case 0x07:	/* LCH_BASS_BOOST_N0 */
-    case 0x08:	/* LCH_BASS_BOOST_N1 */
-    case 0x09:	/* LCH_BASS_BOOST_N2 */
-    case 0x0a:	/* LCH_BASS_BOOST_N3 */
-    case 0x0b:	/* LCH_BASS_BOOST_N4 */
-    case 0x0c:	/* LCH_BASS_BOOST_N5 */
-    case 0x0d:	/* LCH_BASS_BOOST_D1 */
-    case 0x0e:	/* LCH_BASS_BOOST_D2 */
-    case 0x0f:	/* LCH_BASS_BOOST_D4 */
-    case 0x10:	/* LCH_BASS_BOOST_D5 */
-    case 0x11:	/* RCH_BASS_BOOST_N0 */
-    case 0x12:	/* RCH_BASS_BOOST_N1 */
-    case 0x13:	/* RCH_BASS_BOOST_N2 */
-    case 0x14:	/* RCH_BASS_BOOST_N3 */
-    case 0x15:	/* RCH_BASS_BOOST_N4 */
-    case 0x16:	/* RCH_BASS_BOOST_N5 */
-    case 0x17:	/* RCH_BASS_BOOST_D1 */
-    case 0x18:	/* RCH_BASS_BOOST_D2 */
-    case 0x19:	/* RCH_BASS_BOOST_D4 */
-    case 0x1a:	/* RCH_BASS_BOOST_D5 */
-        return s->filter_data[reg - 0x07];
-
-    case 0x1b:	/* PLL Programmability 1 */
-        return s->pll[0];
-
-    case 0x1c:	/* PLL Programmability 2 */
-        return s->pll[1];
-
-    case 0x1d:	/* Audio Control 4 */
-        return (!s->softstep) << 14;
-
-    default:
-#ifdef TSC_VERBOSE
-        fprintf(stderr, "tsc2102_audio_register_read: "
-                        "no such register: 0x%02x\n", reg);
-#endif
-        return 0xffff;
-    }
-}
-
-static void tsc2102_data_register_write(
-                TSC210xState *s, int reg, uint16_t value)
-{
-    switch (reg) {
-    case 0x00:	/* X */
-    case 0x01:	/* Y */
-    case 0x02:	/* Z1 */
-    case 0x03:	/* Z2 */
-    case 0x05:	/* BAT1 */
-    case 0x06:	/* BAT2 */
-    case 0x07:	/* AUX1 */
-    case 0x08:	/* AUX2 */
-    case 0x09:	/* TEMP1 */
-    case 0x0a:	/* TEMP2 */
-        return;
-
-    default:
-        qemu_log_mask(LOG_GUEST_ERROR, "tsc2102_data_register_write: "
-                                       "no such register: 0x%02x\n", reg);
-    }
-}
-
-static void tsc2102_control_register_write(
-                TSC210xState *s, int reg, uint16_t value)
-{
-    switch (reg) {
-    case 0x00:	/* TSC ADC */
-        s->host_mode = value >> 15;
-        s->enabled = !(value & 0x4000);
-        if (s->busy && !s->enabled)
-            timer_del(s->timer);
-        s->busy = s->busy && s->enabled;
-        s->nextfunction = (value >> 10) & 0xf;
-        s->nextprecision = (value >> 8) & 3;
-        s->filter = value & 0xff;
-        return;
-
-    case 0x01:	/* Status / Keypad Control */
-        if ((s->model & 0xff00) == 0x2100)
-            s->pin_func = value >> 14;
-        else {
-            s->kb.scan = (value >> 14) & 1;
-            s->kb.debounce = (value >> 11) & 7;
-            if (s->kb.intr && s->kb.scan) {
-                s->kb.intr = 0;
-                qemu_irq_raise(s->kbint);
-            }
-        }
-        return;
-
-    case 0x02:	/* DAC Control */
-        if ((s->model & 0xff00) == 0x2300) {
-            s->dac_power &= 0x7fff;
-            s->dac_power |= 0x8000 & value;
-        } else
-            goto bad_reg;
-        break;
-
-    case 0x03:	/* Reference */
-        s->ref = value & 0x1f;
-        return;
-
-    case 0x04:	/* Reset */
-        if (value == 0xbb00) {
-            if (s->busy)
-                timer_del(s->timer);
-            tsc210x_reset(s);
-#ifdef TSC_VERBOSE
-        } else {
-            fprintf(stderr, "tsc2102_control_register_write: "
-                            "wrong value written into RESET\n");
-#endif
-        }
-        return;
-
-    case 0x05:	/* Configuration */
-        s->timing = value & 0x3f;
-#ifdef TSC_VERBOSE
-        if (value & ~0x3f)
-            fprintf(stderr, "tsc2102_control_register_write: "
-                            "wrong value written into CONFIG\n");
-#endif
-        return;
-
-    case 0x06:	/* Secondary configuration */
-        if ((s->model & 0xff00) == 0x2100)
-            goto bad_reg;
-        s->kb.mode = value >> 14;
-        s->pll[2] = value & 0x3ffff;
-        return;
-
-    case 0x10:	/* Keypad Mask */
-        if ((s->model & 0xff00) == 0x2100)
-            goto bad_reg;
-        s->kb.mask = value;
-        return;
-
-    default:
-    bad_reg:
-        qemu_log_mask(LOG_GUEST_ERROR, "tsc2102_control_register_write: "
-                                       "no such register: 0x%02x\n", reg);
-    }
-}
-
-static void tsc2102_audio_register_write(
-                TSC210xState *s, int reg, uint16_t value)
-{
-    switch (reg) {
-    case 0x00:	/* Audio Control 1 */
-        s->audio_ctrl1 = value & 0x0f3f;
-#ifdef TSC_VERBOSE
-        if ((value & ~0x0f3f) || ((value & 7) != ((value >> 3) & 7)))
-            fprintf(stderr, "tsc2102_audio_register_write: "
-                            "wrong value written into Audio 1\n");
-#endif
-        tsc2102_audio_rate_update(s);
-        tsc2102_audio_output_update(s);
-        return;
-
-    case 0x01:
-#ifdef TSC_VERBOSE
-        if (value != 0xff00)
-            fprintf(stderr, "tsc2102_audio_register_write: "
-                            "wrong value written into reg 0x01\n");
-#endif
-        return;
-
-    case 0x02:	/* DAC Volume Control */
-        s->volume = value;
-        s->volume_change = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
-        return;
-
-    case 0x03:
-#ifdef TSC_VERBOSE
-        if (value != 0x8b00)
-            fprintf(stderr, "tsc2102_audio_register_write: "
-                            "wrong value written into reg 0x03\n");
-#endif
-        return;
-
-    case 0x04:	/* Audio Control 2 */
-        s->audio_ctrl2 = value & 0xf7f2;
-#ifdef TSC_VERBOSE
-        if (value & ~0xf7fd)
-            fprintf(stderr, "tsc2102_audio_register_write: "
-                            "wrong value written into Audio 2\n");
-#endif
-        return;
-
-    case 0x05:	/* Stereo DAC Power Control */
-        if ((value & ~s->dac_power) & (1 << 10))
-            s->powerdown = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
-
-        s->dac_power = value & 0x9543;
-#ifdef TSC_VERBOSE
-        if ((value & ~0x9543) != 0x2aa0)
-            fprintf(stderr, "tsc2102_audio_register_write: "
-                            "wrong value written into Power\n");
-#endif
-        tsc2102_audio_rate_update(s);
-        tsc2102_audio_output_update(s);
-        return;
-
-    case 0x06:	/* Audio Control 3 */
-        s->audio_ctrl3 &= 0x00c0;
-        s->audio_ctrl3 |= value & 0xf800;
-#ifdef TSC_VERBOSE
-        if (value & ~0xf8c7)
-            fprintf(stderr, "tsc2102_audio_register_write: "
-                            "wrong value written into Audio 3\n");
-#endif
-        tsc2102_audio_output_update(s);
-        return;
-
-    case 0x07:	/* LCH_BASS_BOOST_N0 */
-    case 0x08:	/* LCH_BASS_BOOST_N1 */
-    case 0x09:	/* LCH_BASS_BOOST_N2 */
-    case 0x0a:	/* LCH_BASS_BOOST_N3 */
-    case 0x0b:	/* LCH_BASS_BOOST_N4 */
-    case 0x0c:	/* LCH_BASS_BOOST_N5 */
-    case 0x0d:	/* LCH_BASS_BOOST_D1 */
-    case 0x0e:	/* LCH_BASS_BOOST_D2 */
-    case 0x0f:	/* LCH_BASS_BOOST_D4 */
-    case 0x10:	/* LCH_BASS_BOOST_D5 */
-    case 0x11:	/* RCH_BASS_BOOST_N0 */
-    case 0x12:	/* RCH_BASS_BOOST_N1 */
-    case 0x13:	/* RCH_BASS_BOOST_N2 */
-    case 0x14:	/* RCH_BASS_BOOST_N3 */
-    case 0x15:	/* RCH_BASS_BOOST_N4 */
-    case 0x16:	/* RCH_BASS_BOOST_N5 */
-    case 0x17:	/* RCH_BASS_BOOST_D1 */
-    case 0x18:	/* RCH_BASS_BOOST_D2 */
-    case 0x19:	/* RCH_BASS_BOOST_D4 */
-    case 0x1a:	/* RCH_BASS_BOOST_D5 */
-        s->filter_data[reg - 0x07] = value;
-        return;
-
-    case 0x1b:	/* PLL Programmability 1 */
-        s->pll[0] = value & 0xfffc;
-#ifdef TSC_VERBOSE
-        if (value & ~0xfffc)
-            fprintf(stderr, "tsc2102_audio_register_write: "
-                            "wrong value written into PLL 1\n");
-#endif
-        return;
-
-    case 0x1c:	/* PLL Programmability 2 */
-        s->pll[1] = value & 0xfffc;
-#ifdef TSC_VERBOSE
-        if (value & ~0xfffc)
-            fprintf(stderr, "tsc2102_audio_register_write: "
-                            "wrong value written into PLL 2\n");
-#endif
-        return;
-
-    case 0x1d:	/* Audio Control 4 */
-        s->softstep = !(value & 0x4000);
-#ifdef TSC_VERBOSE
-        if (value & ~0x4000)
-            fprintf(stderr, "tsc2102_audio_register_write: "
-                            "wrong value written into Audio 4\n");
-#endif
-        return;
-
-    default:
-        qemu_log_mask(LOG_GUEST_ERROR, "tsc2102_audio_register_write: "
-                                       "no such register: 0x%02x\n", reg);
-    }
-}
-
-/* This handles most of the chip logic.  */
-static void tsc210x_pin_update(TSC210xState *s)
-{
-    int64_t expires;
-    bool pin_state;
-
-    switch (s->pin_func) {
-    case 0:
-        pin_state = s->pressure;
-        break;
-    case 1:
-        pin_state = !!s->dav;
-        break;
-    case 2:
-    default:
-        pin_state = s->pressure && !s->dav;
-    }
-
-    if (!s->enabled)
-        pin_state = false;
-
-    if (pin_state != s->irq) {
-        s->irq = pin_state;
-        qemu_set_irq(s->pint, !s->irq);
-    }
-
-    switch (s->nextfunction) {
-    case TSC_MODE_XY_SCAN:
-    case TSC_MODE_XYZ_SCAN:
-        if (!s->pressure)
-            return;
-        break;
-
-    case TSC_MODE_X:
-    case TSC_MODE_Y:
-    case TSC_MODE_Z:
-        if (!s->pressure)
-            return;
-        /* Fall through */
-    case TSC_MODE_BAT1:
-    case TSC_MODE_BAT2:
-    case TSC_MODE_AUX:
-    case TSC_MODE_TEMP1:
-    case TSC_MODE_TEMP2:
-        if (s->dav)
-            s->enabled = false;
-        break;
-
-    case TSC_MODE_AUX_SCAN:
-    case TSC_MODE_PORT_SCAN:
-        break;
-
-    case TSC_MODE_NO_SCAN:
-    case TSC_MODE_XX_DRV:
-    case TSC_MODE_YY_DRV:
-    case TSC_MODE_YX_DRV:
-    default:
-        return;
-    }
-
-    if (!s->enabled || s->busy || s->dav)
-        return;
-
-    s->busy = true;
-    s->precision = s->nextprecision;
-    s->function = s->nextfunction;
-    expires = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
-        (NANOSECONDS_PER_SECOND >> 10);
-    timer_mod(s->timer, expires);
-}
-
-static uint16_t tsc210x_read(TSC210xState *s)
-{
-    uint16_t ret = 0x0000;
-
-    if (!s->command)
-        fprintf(stderr, "tsc210x_read: SPI underrun!\n");
-
-    switch (s->page) {
-    case TSC_DATA_REGISTERS_PAGE:
-        ret = tsc2102_data_register_read(s, s->offset);
-        if (!s->dav)
-            qemu_irq_raise(s->davint);
-        break;
-    case TSC_CONTROL_REGISTERS_PAGE:
-        ret = tsc2102_control_register_read(s, s->offset);
-        break;
-    case TSC_AUDIO_REGISTERS_PAGE:
-        ret = tsc2102_audio_register_read(s, s->offset);
-        break;
-    default:
-        hw_error("tsc210x_read: wrong memory page\n");
-    }
-
-    tsc210x_pin_update(s);
-
-    /* Allow sequential reads.  */
-    s->offset ++;
-    s->state = false;
-    return ret;
-}
-
-static void tsc210x_write(TSC210xState *s, uint16_t value)
-{
-    /*
-     * This is a two-state state machine for reading
-     * command and data every second time.
-     */
-    if (!s->state) {
-        s->command = (value >> 15) != 0;
-        s->page = (value >> 11) & 0x0f;
-        s->offset = (value >> 5) & 0x3f;
-        s->state = true;
-    } else {
-        if (s->command)
-            fprintf(stderr, "tsc210x_write: SPI overrun!\n");
-        else
-            switch (s->page) {
-            case TSC_DATA_REGISTERS_PAGE:
-                tsc2102_data_register_write(s, s->offset, value);
-                break;
-            case TSC_CONTROL_REGISTERS_PAGE:
-                tsc2102_control_register_write(s, s->offset, value);
-                break;
-            case TSC_AUDIO_REGISTERS_PAGE:
-                tsc2102_audio_register_write(s, s->offset, value);
-                break;
-            default:
-                hw_error("tsc210x_write: wrong memory page\n");
-            }
-
-        tsc210x_pin_update(s);
-        s->state = false;
-    }
-}
-
-uint32_t tsc210x_txrx(void *opaque, uint32_t value, int len)
-{
-    TSC210xState *s = opaque;
-    uint32_t ret = 0;
-
-    if (len != 16) {
-        qemu_log_mask(LOG_GUEST_ERROR,
-                      "%s: bad SPI word width %i\n", __func__, len);
-        return 0;
-    }
-
-    /* TODO: sequential reads etc - how do we make sure the host doesn't
-     * unintentionally read out a conversion result from a register while
-     * transmitting the command word of the next command?  */
-    if (!value || (s->state && s->command))
-        ret = tsc210x_read(s);
-    if (value || (s->state && !s->command))
-        tsc210x_write(s, value);
-
-    return ret;
-}
-
-static void tsc210x_timer_tick(void *opaque)
-{
-    TSC210xState *s = opaque;
-
-    /* Timer ticked -- a set of conversions has been finished.  */
-
-    if (!s->busy)
-        return;
-
-    s->busy = false;
-    s->dav |= mode_regs[s->function];
-    tsc210x_pin_update(s);
-    qemu_irq_lower(s->davint);
-}
-
-static void tsc210x_touchscreen_event(void *opaque,
-                int x, int y, int z, int buttons_state)
-{
-    TSC210xState *s = opaque;
-    int p = s->pressure;
-
-    if (buttons_state) {
-        s->x = x;
-        s->y = y;
-    }
-    s->pressure = !!buttons_state;
-
-    /*
-     * Note: We would get better responsiveness in the guest by
-     * signaling TS events immediately, but for now we simulate
-     * the first conversion delay for sake of correctness.
-     */
-    if (p != s->pressure)
-        tsc210x_pin_update(s);
-}
-
-static void tsc210x_i2s_swallow(TSC210xState *s)
-{
-    if (s->dac_voice[0])
-        tsc210x_out_flush(s, s->codec.out.len);
-    else
-        s->codec.out.len = 0;
-}
-
-static void tsc210x_i2s_set_rate(TSC210xState *s, int in, int out)
-{
-    s->i2s_tx_rate = out;
-    s->i2s_rx_rate = in;
-}
-
-static int tsc210x_pre_save(void *opaque)
-{
-    TSC210xState *s = (TSC210xState *) opaque;
-    s->now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
-
-    return 0;
-}
-
-static int tsc210x_post_load(void *opaque, int version_id)
-{
-    TSC210xState *s = (TSC210xState *) opaque;
-    int64_t now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
-
-    if (s->function >= ARRAY_SIZE(mode_regs)) {
-        return -EINVAL;
-    }
-    if (s->nextfunction >= ARRAY_SIZE(mode_regs)) {
-        return -EINVAL;
-    }
-    if (s->precision >= ARRAY_SIZE(resolution)) {
-        return -EINVAL;
-    }
-    if (s->nextprecision >= ARRAY_SIZE(resolution)) {
-        return -EINVAL;
-    }
-
-    s->volume_change -= s->now;
-    s->volume_change += now;
-    s->powerdown -= s->now;
-    s->powerdown += now;
-
-    s->busy = timer_pending(s->timer);
-    qemu_set_irq(s->pint, !s->irq);
-    qemu_set_irq(s->davint, !s->dav);
-
-    return 0;
-}
-
-static const VMStateField vmstatefields_tsc210x[] = {
-    VMSTATE_BOOL(enabled, TSC210xState),
-    VMSTATE_BOOL(host_mode, TSC210xState),
-    VMSTATE_BOOL(irq, TSC210xState),
-    VMSTATE_BOOL(command, TSC210xState),
-    VMSTATE_BOOL(pressure, TSC210xState),
-    VMSTATE_BOOL(softstep, TSC210xState),
-    VMSTATE_BOOL(state, TSC210xState),
-    VMSTATE_UINT16(dav, TSC210xState),
-    VMSTATE_INT32(x, TSC210xState),
-    VMSTATE_INT32(y, TSC210xState),
-    VMSTATE_UINT8(offset, TSC210xState),
-    VMSTATE_UINT8(page, TSC210xState),
-    VMSTATE_UINT8(filter, TSC210xState),
-    VMSTATE_UINT8(pin_func, TSC210xState),
-    VMSTATE_UINT8(ref, TSC210xState),
-    VMSTATE_UINT8(timing, TSC210xState),
-    VMSTATE_UINT8(noise, TSC210xState),
-    VMSTATE_UINT8(function, TSC210xState),
-    VMSTATE_UINT8(nextfunction, TSC210xState),
-    VMSTATE_UINT8(precision, TSC210xState),
-    VMSTATE_UINT8(nextprecision, TSC210xState),
-    VMSTATE_UINT16(audio_ctrl1, TSC210xState),
-    VMSTATE_UINT16(audio_ctrl2, TSC210xState),
-    VMSTATE_UINT16(audio_ctrl3, TSC210xState),
-    VMSTATE_UINT16_ARRAY(pll, TSC210xState, 3),
-    VMSTATE_UINT16(volume, TSC210xState),
-    VMSTATE_UINT16(dac_power, TSC210xState),
-    VMSTATE_INT64(volume_change, TSC210xState),
-    VMSTATE_INT64(powerdown, TSC210xState),
-    VMSTATE_INT64(now, TSC210xState),
-    VMSTATE_UINT16_ARRAY(filter_data, TSC210xState, 0x14),
-    VMSTATE_TIMER_PTR(timer, TSC210xState),
-    VMSTATE_END_OF_LIST()
-};
-
-static const VMStateDescription vmstate_tsc2102 = {
-    .name = "tsc2102",
-    .version_id = 1,
-    .minimum_version_id = 1,
-    .pre_save = tsc210x_pre_save,
-    .post_load = tsc210x_post_load,
-    .fields = vmstatefields_tsc210x,
-};
-
-static const VMStateDescription vmstate_tsc2301 = {
-    .name = "tsc2301",
-    .version_id = 1,
-    .minimum_version_id = 1,
-    .pre_save = tsc210x_pre_save,
-    .post_load = tsc210x_post_load,
-    .fields = vmstatefields_tsc210x,
-};
-
-static void tsc210x_init(TSC210xState *s,
-                         const char *name,
-                         const VMStateDescription *vmsd)
-{
-    s->tr[0] = 0;
-    s->tr[1] = 1;
-    s->tr[2] = 1;
-    s->tr[3] = 0;
-    s->tr[4] = 1;
-    s->tr[5] = 0;
-    s->tr[6] = 1;
-    s->tr[7] = 0;
-
-    s->chip.opaque = s;
-    s->chip.send = (void *) tsc210x_write;
-    s->chip.receive = (void *) tsc210x_read;
-
-    s->codec.opaque = s;
-    s->codec.tx_swallow = (void *) tsc210x_i2s_swallow;
-    s->codec.set_rate = (void *) tsc210x_i2s_set_rate;
-    s->codec.in.fifo = s->in_fifo;
-    s->codec.out.fifo = s->out_fifo;
-
-    tsc210x_reset(s);
-
-    qemu_add_mouse_event_handler(tsc210x_touchscreen_event, s, 1, name);
-
-    if (current_machine->audiodev) {
-        s->card.name = g_strdup(current_machine->audiodev);
-        s->card.state = audio_state_by_name(s->card.name, &error_fatal);
-    }
-    AUD_register_card(s->name, &s->card, &error_fatal);
-
-    qemu_register_reset((void *) tsc210x_reset, s);
-    vmstate_register(NULL, 0, vmsd, s);
-}
-
-uWireSlave *tsc2102_init(qemu_irq pint)
-{
-    TSC210xState *s;
-
-    s = g_new0(TSC210xState, 1);
-    s->x = 160;
-    s->y = 160;
-    s->pressure = 0;
-    s->precision = s->nextprecision = 0;
-    s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, tsc210x_timer_tick, s);
-    s->pint = pint;
-    s->model = 0x2102;
-    s->name = "tsc2102";
-
-    tsc210x_init(s, "QEMU TSC2102-driven Touchscreen", &vmstate_tsc2102);
-
-    return &s->chip;
-}
-
-uWireSlave *tsc2301_init(qemu_irq penirq, qemu_irq kbirq, qemu_irq dav)
-{
-    TSC210xState *s;
-
-    s = g_new0(TSC210xState, 1);
-    s->x = 400;
-    s->y = 240;
-    s->pressure = 0;
-    s->precision = s->nextprecision = 0;
-    s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, tsc210x_timer_tick, s);
-    s->pint = penirq;
-    s->kbint = kbirq;
-    s->davint = dav;
-    s->model = 0x2301;
-    s->name = "tsc2301";
-
-    tsc210x_init(s, "QEMU TSC2301-driven Touchscreen", &vmstate_tsc2301);
-
-    return &s->chip;
-}
-
-I2SCodec *tsc210x_codec(uWireSlave *chip)
-{
-    TSC210xState *s = (TSC210xState *) chip->opaque;
-
-    return &s->codec;
-}
-
-/*
- * Use tslib generated calibration data to generate ADC input values
- * from the touchscreen.  Assuming 12-bit precision was used during
- * tslib calibration.
- */
-void tsc210x_set_transform(uWireSlave *chip, const MouseTransformInfo *info)
-{
-    TSC210xState *s = (TSC210xState *) chip->opaque;
-#if 0
-    int64_t ltr[8];
-
-    ltr[0] = (int64_t) info->a[1] * info->y;
-    ltr[1] = (int64_t) info->a[4] * info->x;
-    ltr[2] = (int64_t) info->a[1] * info->a[3] -
-            (int64_t) info->a[4] * info->a[0];
-    ltr[3] = (int64_t) info->a[2] * info->a[4] -
-            (int64_t) info->a[5] * info->a[1];
-    ltr[4] = (int64_t) info->a[0] * info->y;
-    ltr[5] = (int64_t) info->a[3] * info->x;
-    ltr[6] = (int64_t) info->a[4] * info->a[0] -
-            (int64_t) info->a[1] * info->a[3];
-    ltr[7] = (int64_t) info->a[2] * info->a[3] -
-            (int64_t) info->a[5] * info->a[0];
-
-    /* Avoid integer overflow */
-    s->tr[0] = ltr[0] >> 11;
-    s->tr[1] = ltr[1] >> 11;
-    s->tr[2] = muldiv64(ltr[2], 1, info->a[6]);
-    s->tr[3] = muldiv64(ltr[3], 1 << 4, ltr[2]);
-    s->tr[4] = ltr[4] >> 11;
-    s->tr[5] = ltr[5] >> 11;
-    s->tr[6] = muldiv64(ltr[6], 1, info->a[6]);
-    s->tr[7] = muldiv64(ltr[7], 1 << 4, ltr[6]);
-#else
-
-    /* This version assumes touchscreen X & Y axis are parallel or
-     * perpendicular to LCD's  X & Y axis in some way.  */
-    if (abs(info->a[0]) > abs(info->a[1])) {
-        s->tr[0] = 0;
-        s->tr[1] = -info->a[6] * info->x;
-        s->tr[2] = info->a[0];
-        s->tr[3] = -info->a[2] / info->a[0];
-        s->tr[4] = info->a[6] * info->y;
-        s->tr[5] = 0;
-        s->tr[6] = info->a[4];
-        s->tr[7] = -info->a[5] / info->a[4];
-    } else {
-        s->tr[0] = info->a[6] * info->y;
-        s->tr[1] = 0;
-        s->tr[2] = info->a[1];
-        s->tr[3] = -info->a[2] / info->a[1];
-        s->tr[4] = 0;
-        s->tr[5] = -info->a[6] * info->x;
-        s->tr[6] = info->a[3];
-        s->tr[7] = -info->a[5] / info->a[3];
-    }
-
-    s->tr[0] >>= 11;
-    s->tr[1] >>= 11;
-    s->tr[3] <<= 4;
-    s->tr[4] >>= 11;
-    s->tr[5] >>= 11;
-    s->tr[7] <<= 4;
-#endif
-}
-
-void tsc210x_key_event(uWireSlave *chip, int key, int down)
-{
-    TSC210xState *s = (TSC210xState *) chip->opaque;
-
-    if (down)
-        s->kb.down |= 1 << key;
-    else
-        s->kb.down &= ~(1 << key);
-
-    if (down && (s->kb.down & ~s->kb.mask) && !s->kb.intr) {
-        s->kb.intr = 1;
-        qemu_irq_lower(s->kbint);
-    } else if (s->kb.intr && !(s->kb.down & ~s->kb.mask) &&
-                    !(s->kb.mode & 1)) {
-        s->kb.intr = 0;
-        qemu_irq_raise(s->kbint);
-    }
-}
diff --git a/hw/input/Kconfig b/hw/input/Kconfig
index 01a64a9aa7e..6f3ffbc5aa1 100644
--- a/hw/input/Kconfig
+++ b/hw/input/Kconfig
@@ -35,8 +35,5 @@ config VHOST_USER_INPUT
     default y
     depends on VIRTIO_INPUT && VHOST_USER
 
-config TSC210X
-    bool
-
 config LASIPS2
     select PS2
diff --git a/hw/input/meson.build b/hw/input/meson.build
index 064d1e47802..f12796fb695 100644
--- a/hw/input/meson.build
+++ b/hw/input/meson.build
@@ -10,5 +10,4 @@ system_ss.add(when: 'CONFIG_VIRTIO_INPUT', if_true: files('virtio-input.c'))
 system_ss.add(when: 'CONFIG_VIRTIO_INPUT', if_true: files('virtio-input-hid.c'))
 system_ss.add(when: 'CONFIG_VIRTIO_INPUT_HOST', if_true: files('virtio-input-host.c'))
 
-system_ss.add(when: 'CONFIG_TSC210X', if_true: files('tsc210x.c'))
 system_ss.add(when: 'CONFIG_LASIPS2', if_true: files('lasips2.c'))
