@@ -907,12 +907,10 @@ PXA2XX
M: Peter Maydell <peter.maydell@linaro.org>
L: qemu-arm@nongnu.org
S: Odd Fixes
-F: hw/arm/mainstone.c
F: hw/arm/z2.c
F: hw/*/pxa2xx*
F: hw/misc/mst_fpga.c
F: include/hw/arm/pxa.h
-F: docs/system/arm/mainstone.rst
SABRELITE / i.MX6
M: Peter Maydell <peter.maydell@linaro.org>
deleted file mode 100644
@@ -1,25 +0,0 @@
-Intel Mainstone II board (``mainstone``)
-========================================
-
-The ``mainstone`` board emulates the Intel Mainstone II development
-board, which uses a PXA270 CPU.
-
-Emulated devices:
-
-- Flash memory
-- Keypad
-- MMC controller
-- 91C111 ethernet
-- PIC
-- Timer
-- DMA
-- GPIO
-- FIR
-- Serial
-- LCD controller
-- SSP
-- USB controller
-- RTC
-- PCMCIA
-- I2C
-- I2S
@@ -91,7 +91,6 @@ undocumented; you can get a complete list by running
arm/cubieboard
arm/emcraft-sf2
arm/musicpal
- arm/mainstone
arm/kzm
arm/nseries
arm/nrf
@@ -27,7 +27,6 @@
# CONFIG_VERSATILE=n
# CONFIG_VEXPRESS=n
# CONFIG_ZYNQ=n
-# CONFIG_MAINSTONE=n
# CONFIG_Z2=n
# CONFIG_NPCM7XX=n
# CONFIG_COLLIE=n
deleted file mode 100644
@@ -1,175 +0,0 @@
-/*
- * PXA270-based Intel Mainstone platforms.
- *
- * Copyright (c) 2007 by Armin Kuster <akuster@kama-aina.net> or
- * <akuster@mvista.com>
- *
- * Code based on spitz platform by Andrzej Zaborowski <balrog@zabor.org>
- *
- * This code is licensed under the GNU GPL v2.
- *
- * Contributions after 2012-01-13 are licensed under the terms of the
- * GNU GPL, version 2 or (at your option) any later version.
- */
-#include "qemu/osdep.h"
-#include "qemu/units.h"
-#include "qemu/error-report.h"
-#include "qapi/error.h"
-#include "hw/arm/pxa.h"
-#include "hw/arm/boot.h"
-#include "net/net.h"
-#include "hw/net/smc91c111.h"
-#include "hw/boards.h"
-#include "hw/block/flash.h"
-#include "hw/sysbus.h"
-#include "exec/address-spaces.h"
-
-/* Device addresses */
-#define MST_FPGA_PHYS 0x08000000
-#define MST_ETH_PHYS 0x10000300
-#define MST_FLASH_0 0x00000000
-#define MST_FLASH_1 0x04000000
-
-/* IRQ definitions */
-#define MMC_IRQ 0
-#define USIM_IRQ 1
-#define USBC_IRQ 2
-#define ETHERNET_IRQ 3
-#define AC97_IRQ 4
-#define PEN_IRQ 5
-#define MSINS_IRQ 6
-#define EXBRD_IRQ 7
-#define S0_CD_IRQ 9
-#define S0_STSCHG_IRQ 10
-#define S0_IRQ 11
-#define S1_CD_IRQ 13
-#define S1_STSCHG_IRQ 14
-#define S1_IRQ 15
-
-static const struct keymap map[0xE0] = {
- [0 ... 0xDF] = { -1, -1 },
- [0x1e] = {0,0}, /* a */
- [0x30] = {0,1}, /* b */
- [0x2e] = {0,2}, /* c */
- [0x20] = {0,3}, /* d */
- [0x12] = {0,4}, /* e */
- [0x21] = {0,5}, /* f */
- [0x22] = {1,0}, /* g */
- [0x23] = {1,1}, /* h */
- [0x17] = {1,2}, /* i */
- [0x24] = {1,3}, /* j */
- [0x25] = {1,4}, /* k */
- [0x26] = {1,5}, /* l */
- [0x32] = {2,0}, /* m */
- [0x31] = {2,1}, /* n */
- [0x18] = {2,2}, /* o */
- [0x19] = {2,3}, /* p */
- [0x10] = {2,4}, /* q */
- [0x13] = {2,5}, /* r */
- [0x1f] = {3,0}, /* s */
- [0x14] = {3,1}, /* t */
- [0x16] = {3,2}, /* u */
- [0x2f] = {3,3}, /* v */
- [0x11] = {3,4}, /* w */
- [0x2d] = {3,5}, /* x */
- [0x34] = {4,0}, /* . */
- [0x15] = {4,2}, /* y */
- [0x2c] = {4,3}, /* z */
- [0x35] = {4,4}, /* / */
- [0xc7] = {5,0}, /* Home */
- [0x2a] = {5,1}, /* shift */
- /*
- * There are two matrix positions which map to space,
- * but QEMU can only use one of them for the reverse
- * mapping, so simply use the second one.
- */
- /* [0x39] = {5,2}, space */
- [0x39] = {5,3}, /* space */
- /*
- * Matrix position {5,4} and other keys are missing here.
- * TODO: Compare with Linux code and test real hardware.
- */
- [0x1c] = {5,4}, /* enter */
- [0x0e] = {5,5}, /* backspace */
- [0xc8] = {6,0}, /* up */
- [0xd0] = {6,1}, /* down */
- [0xcb] = {6,2}, /* left */
- [0xcd] = {6,3}, /* right */
-};
-
-enum mainstone_model_e { mainstone };
-
-#define MAINSTONE_RAM_SIZE (64 * MiB)
-#define MAINSTONE_ROM_SIZE (8 * MiB)
-#define MAINSTONE_FLASH_SIZE (32 * MiB)
-
-static struct arm_boot_info mainstone_binfo = {
- .loader_start = PXA2XX_SDRAM_BASE,
- .ram_size = MAINSTONE_RAM_SIZE,
-};
-
-#define FLASH_SECTOR_SIZE (256 * KiB)
-
-static void mainstone_common_init(MachineState *machine,
- enum mainstone_model_e model, int arm_id)
-{
- hwaddr mainstone_flash_base[] = { MST_FLASH_0, MST_FLASH_1 };
- PXA2xxState *mpu;
- DeviceState *mst_irq;
- DriveInfo *dinfo;
- int i;
- MemoryRegion *rom = g_new(MemoryRegion, 1);
-
- /* Setup CPU & memory */
- mpu = pxa270_init(mainstone_binfo.ram_size, machine->cpu_type);
- memory_region_init_rom(rom, NULL, "mainstone.rom", MAINSTONE_ROM_SIZE,
- &error_fatal);
- memory_region_add_subregion(get_system_memory(), 0x00000000, rom);
-
- /* There are two 32MiB flash devices on the board */
- for (i = 0; i < 2; i ++) {
- dinfo = drive_get(IF_PFLASH, 0, i);
- pflash_cfi01_register(mainstone_flash_base[i],
- i ? "mainstone.flash1" : "mainstone.flash0",
- MAINSTONE_FLASH_SIZE,
- dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
- FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0);
- }
-
- mst_irq = sysbus_create_simple("mainstone-fpga", MST_FPGA_PHYS,
- qdev_get_gpio_in(mpu->gpio, 0));
-
- /* setup keypad */
- pxa27x_register_keypad(mpu->kp, map, 0xe0);
-
- /* MMC/SD host */
- pxa2xx_mmci_handlers(mpu->mmc, NULL, qdev_get_gpio_in(mst_irq, MMC_IRQ));
-
- pxa2xx_pcmcia_set_irq_cb(mpu->pcmcia[0],
- qdev_get_gpio_in(mst_irq, S0_IRQ),
- qdev_get_gpio_in(mst_irq, S0_CD_IRQ));
- pxa2xx_pcmcia_set_irq_cb(mpu->pcmcia[1],
- qdev_get_gpio_in(mst_irq, S1_IRQ),
- qdev_get_gpio_in(mst_irq, S1_CD_IRQ));
-
- smc91c111_init(MST_ETH_PHYS, qdev_get_gpio_in(mst_irq, ETHERNET_IRQ));
-
- mainstone_binfo.board_id = arm_id;
- arm_load_kernel(mpu->cpu, machine, &mainstone_binfo);
-}
-
-static void mainstone_init(MachineState *machine)
-{
- mainstone_common_init(machine, mainstone, 0x196);
-}
-
-static void mainstone2_machine_init(MachineClass *mc)
-{
- mc->desc = "Mainstone II (PXA27x)";
- mc->init = mainstone_init;
- mc->ignore_memory_transaction_failures = true;
- mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c5");
- mc->deprecation_reason = "machine is old and unmaintained";
-}
-
-DEFINE_MACHINE("mainstone", mainstone2_machine_init)
@@ -94,14 +94,6 @@ config INTEGRATOR
select PL181 # display
select SMC91C111
-config MAINSTONE
- bool
- default y
- depends on TCG && ARM
- select PXA2XX
- select PFLASH_CFI01
- select SMC91C111
-
config MPS3R
bool
default y
@@ -6,7 +6,6 @@ arm_ss.add(when: 'CONFIG_DIGIC', if_true: files('digic_boards.c'))
arm_ss.add(when: 'CONFIG_EMCRAFT_SF2', if_true: files('msf2-som.c'))
arm_ss.add(when: 'CONFIG_HIGHBANK', if_true: files('highbank.c'))
arm_ss.add(when: 'CONFIG_INTEGRATOR', if_true: files('integratorcp.c'))
-arm_ss.add(when: 'CONFIG_MAINSTONE', if_true: files('mainstone.c'))
arm_ss.add(when: 'CONFIG_MICROBIT', if_true: files('microbit.c'))
arm_ss.add(when: 'CONFIG_MPS3R', if_true: files('mps3r.c'))
arm_ss.add(when: 'CONFIG_MUSICPAL', if_true: files('musicpal.c'))
The 'mainstone' machine has been deprecated since 9.0, and so we can remove it for the 9.2 release. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- MAINTAINERS | 2 - docs/system/arm/mainstone.rst | 25 ---- docs/system/target-arm.rst | 1 - configs/devices/arm-softmmu/default.mak | 1 - hw/arm/mainstone.c | 175 ------------------------ hw/arm/Kconfig | 8 -- hw/arm/meson.build | 1 - 7 files changed, 213 deletions(-) delete mode 100644 docs/system/arm/mainstone.rst delete mode 100644 hw/arm/mainstone.c