Message ID | 20240819170700.61844-1-peter.maydell@linaro.org |
---|---|
State | New |
Headers | show |
Series | [RFC] scripts/lsan-suppressions: Add a LeakSanitizer suppressions file | expand |
On Mon, 19 Aug 2024 at 18:07, Peter Maydell <peter.maydell@linaro.org> wrote: > > Add a LeakSanitizer suppressions file that documents and suppresses > known false-positive leaks in either QEMU or its dependencies. > To use it you'll need to set > LSAN_OPTIONS="suppressions=/path/to/scripts/lsan-suppressions.txt" > when running a QEMU built with the leak-sanitizer. > > The first and currently only entry is for a deliberate leak in glib's > g_set_user_dirs() that otherwise causes false positive leak reports > in the qga-ssh-test because of its use of G_TEST_OPTION_ISOLATE_DIRS: > > Direct leak of 321 byte(s) in 5 object(s) allocated from: > #0 0x5555dd8abd1e in __interceptor_malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qga/qga-ssh-test+0x19cd1e) (BuildId: 7991a166007e8206c51bee401722a8335e7990bb) > #1 0x7fb5bc724738 in g_malloc debian/build/deb/../../../glib/gmem.c:128:13 > #2 0x7fb5bc739583 in g_strdup debian/build/deb/../../../glib/gstrfuncs.c:361:17 > #3 0x7fb5bc757a29 in set_str_if_different debian/build/deb/../../../glib/gutils.c:1659:21 > #4 0x7fb5bc757a29 in set_str_if_different debian/build/deb/../../../glib/gutils.c:1647:1 > #5 0x7fb5bc757a29 in g_set_user_dirs debian/build/deb/../../../glib/gutils.c:1743:9 > #6 0x7fb5bc743d78 in test_do_isolate_dirs debian/build/deb/../../../glib/gtestutils.c:1486:3 > #7 0x7fb5bc743d78 in test_case_run debian/build/deb/../../../glib/gtestutils.c:2917:16 > #8 0x7fb5bc743d78 in g_test_run_suite_internal debian/build/deb/../../../glib/gtestutils.c:3018:16 > #9 0x7fb5bc74380a in g_test_run_suite_internal debian/build/deb/../../../glib/gtestutils.c:3035:18 > #10 0x7fb5bc74380a in g_test_run_suite_internal debian/build/deb/../../../glib/gtestutils.c:3035:18 > #11 0x7fb5bc743fe9 in g_test_run_suite debian/build/deb/../../../glib/gtestutils.c:3112:13 > #12 0x7fb5bc744055 in g_test_run debian/build/deb/../../../glib/gtestutils.c:2231:7 > #13 0x7fb5bc744055 in g_test_run debian/build/deb/../../../glib/gtestutils.c:2218:1 > #14 0x5555dd9293b1 in main qga/commands-posix-ssh.c:439:12 > #15 0x7fb5bc3dfd8f in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16 > #16 0x7fb5bc3dfe3f in __libc_start_main csu/../csu/libc-start.c:392:3 > #17 0x5555dd828ed4 in _start (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qga/qga-ssh-test+0x119ed4) (BuildId: 7991a166007e8206c51bee401722a8335e7990bb) > > (Strictly speaking, this is a genuine leak, it's just a deliberate > one by glib; they document it in their valgrind-format suppression > file upstream.) > > Signed-off-by: Peter Maydell <peter.maydell@linaro.org> > --- > Does this seem like a good idea? It gives us a place to document > things like this and to suppress them so we could in theory get a > complete clean 'make check' run with the leak sanitizer on. It might > be nice if there was an easy way to enable all our "recommended > sanitizer settings" (ASAN_OPTIONS="fast_unwind_on_malloc=0 is > pretty much required to get useful backtraces, for instance), but > I'm not sure there's a neat way to do that. On the "no" end of the argument: it looks like from glib 2.79 or thereabouts there was support added to glib to make it dynamically detect whether it's running in a binary that was built with LSan and explicitly tell lsan to ignore these deliberate leaks. That fix is less than a year old, though, and at least my dev machine is still running 2.72. https://github.com/GNOME/glib/commit/fb58d55187dfe1565d10c0c0ffdbaa85376cf0b8 -- PMM
Peter Maydell <peter.maydell@linaro.org> writes: > Add a LeakSanitizer suppressions file that documents and suppresses > known false-positive leaks in either QEMU or its dependencies. > To use it you'll need to set > LSAN_OPTIONS="suppressions=/path/to/scripts/lsan-suppressions.txt" > when running a QEMU built with the leak-sanitizer. > > The first and currently only entry is for a deliberate leak in glib's > g_set_user_dirs() that otherwise causes false positive leak reports > in the qga-ssh-test because of its use of G_TEST_OPTION_ISOLATE_DIRS: Shame we can't share with scripts/oss-fuzz/lsan_supressions.tct: # The tcmalloc on Fedora37 confuses things leak:/lib64/libtcmalloc_minimal.so.4 # libxkbcommon also leaks in qemu-keymap leak:/lib64/libxkbcommon.so.0 Or does fuzzing make some things easier to hit? > > Direct leak of 321 byte(s) in 5 object(s) allocated from: > #0 0x5555dd8abd1e in __interceptor_malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qga/qga-ssh-test+0x19cd1e) (BuildId: 7991a166007e8206c51bee401722a8335e7990bb) > #1 0x7fb5bc724738 in g_malloc debian/build/deb/../../../glib/gmem.c:128:13 > #2 0x7fb5bc739583 in g_strdup debian/build/deb/../../../glib/gstrfuncs.c:361:17 > #3 0x7fb5bc757a29 in set_str_if_different debian/build/deb/../../../glib/gutils.c:1659:21 > #4 0x7fb5bc757a29 in set_str_if_different debian/build/deb/../../../glib/gutils.c:1647:1 > #5 0x7fb5bc757a29 in g_set_user_dirs debian/build/deb/../../../glib/gutils.c:1743:9 > #6 0x7fb5bc743d78 in test_do_isolate_dirs debian/build/deb/../../../glib/gtestutils.c:1486:3 > #7 0x7fb5bc743d78 in test_case_run debian/build/deb/../../../glib/gtestutils.c:2917:16 > #8 0x7fb5bc743d78 in g_test_run_suite_internal debian/build/deb/../../../glib/gtestutils.c:3018:16 > #9 0x7fb5bc74380a in g_test_run_suite_internal debian/build/deb/../../../glib/gtestutils.c:3035:18 > #10 0x7fb5bc74380a in g_test_run_suite_internal debian/build/deb/../../../glib/gtestutils.c:3035:18 > #11 0x7fb5bc743fe9 in g_test_run_suite debian/build/deb/../../../glib/gtestutils.c:3112:13 > #12 0x7fb5bc744055 in g_test_run debian/build/deb/../../../glib/gtestutils.c:2231:7 > #13 0x7fb5bc744055 in g_test_run debian/build/deb/../../../glib/gtestutils.c:2218:1 > #14 0x5555dd9293b1 in main qga/commands-posix-ssh.c:439:12 > #15 0x7fb5bc3dfd8f in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16 > #16 0x7fb5bc3dfe3f in __libc_start_main csu/../csu/libc-start.c:392:3 > #17 0x5555dd828ed4 in _start (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qga/qga-ssh-test+0x119ed4) (BuildId: 7991a166007e8206c51bee401722a8335e7990bb) > > (Strictly speaking, this is a genuine leak, it's just a deliberate > one by glib; they document it in their valgrind-format suppression > file upstream.) > > Signed-off-by: Peter Maydell <peter.maydell@linaro.org> > --- > Does this seem like a good idea? It gives us a place to document > things like this and to suppress them so we could in theory get a > complete clean 'make check' run with the leak sanitizer on. It might > be nice if there was an easy way to enable all our "recommended > sanitizer settings" (ASAN_OPTIONS="fast_unwind_on_malloc=0 is > pretty much required to get useful backtraces, for instance), but > I'm not sure there's a neat way to do that. > > scripts/lsan-suppressions.txt | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > create mode 100644 scripts/lsan-suppressions.txt > > diff --git a/scripts/lsan-suppressions.txt b/scripts/lsan-suppressions.txt > new file mode 100644 > index 00000000000..5c3cffaa5a0 > --- /dev/null > +++ b/scripts/lsan-suppressions.txt > @@ -0,0 +1,14 @@ > +# SPDX-License-Identifier: GPL-2.0-or-later > +# Copyright (c) 2024 Linaro Limited > + > +# This is a set of suppressions for LeakSanitizer; you can use it > +# by setting > +# LSAN_OPTIONS="suppressions=/path/to/scripts/lsan-suppressions.txt" > +# when running a QEMU built with the leak-sanitizer. > + > +# g_set_user_dirs() deliberately leaks the previous cached g_get_user_* > +# values. This is documented in upstream glib's valgrind-format > +# suppression file: > +# https://github.com/GNOME/glib/blob/main/tools/glib.supp > +# This avoids false positive leak reports for the qga-ssh-test. > +leak:g_set_user_dirs
On Mon, 19 Aug 2024 at 23:23, Alex Bennée <alex.bennee@linaro.org> wrote: > > Peter Maydell <peter.maydell@linaro.org> writes: > > > Add a LeakSanitizer suppressions file that documents and suppresses > > known false-positive leaks in either QEMU or its dependencies. > > To use it you'll need to set > > LSAN_OPTIONS="suppressions=/path/to/scripts/lsan-suppressions.txt" > > when running a QEMU built with the leak-sanitizer. > > > > The first and currently only entry is for a deliberate leak in glib's > > g_set_user_dirs() that otherwise causes false positive leak reports > > in the qga-ssh-test because of its use of G_TEST_OPTION_ISOLATE_DIRS: > > Shame we can't share with scripts/oss-fuzz/lsan_supressions.tct: > > # The tcmalloc on Fedora37 confuses things > leak:/lib64/libtcmalloc_minimal.so.4 > > # libxkbcommon also leaks in qemu-keymap > leak:/lib64/libxkbcommon.so.0 > > Or does fuzzing make some things easier to hit? Ah, I hadn't realised we already had a suppression file. I think we've just encountered different things. Plus the fuzzing disables qga-ssh-test in qga/meson.build rather than suppressing the leak report. Maybe we could move that to the leak-suppression file, or maybe it causes some other problem in the fuzzing context rather than merely a false positive? (There are also a ton of reported leaks in the GUI libraries we link against if you run with the GTK GUI, but I haven't investigated those to see if they're real or something we should just suppress to reduce the noise.) thanks -- PMM
diff --git a/scripts/lsan-suppressions.txt b/scripts/lsan-suppressions.txt new file mode 100644 index 00000000000..5c3cffaa5a0 --- /dev/null +++ b/scripts/lsan-suppressions.txt @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# Copyright (c) 2024 Linaro Limited + +# This is a set of suppressions for LeakSanitizer; you can use it +# by setting +# LSAN_OPTIONS="suppressions=/path/to/scripts/lsan-suppressions.txt" +# when running a QEMU built with the leak-sanitizer. + +# g_set_user_dirs() deliberately leaks the previous cached g_get_user_* +# values. This is documented in upstream glib's valgrind-format +# suppression file: +# https://github.com/GNOME/glib/blob/main/tools/glib.supp +# This avoids false positive leak reports for the qga-ssh-test. +leak:g_set_user_dirs
Add a LeakSanitizer suppressions file that documents and suppresses known false-positive leaks in either QEMU or its dependencies. To use it you'll need to set LSAN_OPTIONS="suppressions=/path/to/scripts/lsan-suppressions.txt" when running a QEMU built with the leak-sanitizer. The first and currently only entry is for a deliberate leak in glib's g_set_user_dirs() that otherwise causes false positive leak reports in the qga-ssh-test because of its use of G_TEST_OPTION_ISOLATE_DIRS: Direct leak of 321 byte(s) in 5 object(s) allocated from: #0 0x5555dd8abd1e in __interceptor_malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qga/qga-ssh-test+0x19cd1e) (BuildId: 7991a166007e8206c51bee401722a8335e7990bb) #1 0x7fb5bc724738 in g_malloc debian/build/deb/../../../glib/gmem.c:128:13 #2 0x7fb5bc739583 in g_strdup debian/build/deb/../../../glib/gstrfuncs.c:361:17 #3 0x7fb5bc757a29 in set_str_if_different debian/build/deb/../../../glib/gutils.c:1659:21 #4 0x7fb5bc757a29 in set_str_if_different debian/build/deb/../../../glib/gutils.c:1647:1 #5 0x7fb5bc757a29 in g_set_user_dirs debian/build/deb/../../../glib/gutils.c:1743:9 #6 0x7fb5bc743d78 in test_do_isolate_dirs debian/build/deb/../../../glib/gtestutils.c:1486:3 #7 0x7fb5bc743d78 in test_case_run debian/build/deb/../../../glib/gtestutils.c:2917:16 #8 0x7fb5bc743d78 in g_test_run_suite_internal debian/build/deb/../../../glib/gtestutils.c:3018:16 #9 0x7fb5bc74380a in g_test_run_suite_internal debian/build/deb/../../../glib/gtestutils.c:3035:18 #10 0x7fb5bc74380a in g_test_run_suite_internal debian/build/deb/../../../glib/gtestutils.c:3035:18 #11 0x7fb5bc743fe9 in g_test_run_suite debian/build/deb/../../../glib/gtestutils.c:3112:13 #12 0x7fb5bc744055 in g_test_run debian/build/deb/../../../glib/gtestutils.c:2231:7 #13 0x7fb5bc744055 in g_test_run debian/build/deb/../../../glib/gtestutils.c:2218:1 #14 0x5555dd9293b1 in main qga/commands-posix-ssh.c:439:12 #15 0x7fb5bc3dfd8f in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16 #16 0x7fb5bc3dfe3f in __libc_start_main csu/../csu/libc-start.c:392:3 #17 0x5555dd828ed4 in _start (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qga/qga-ssh-test+0x119ed4) (BuildId: 7991a166007e8206c51bee401722a8335e7990bb) (Strictly speaking, this is a genuine leak, it's just a deliberate one by glib; they document it in their valgrind-format suppression file upstream.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> --- Does this seem like a good idea? It gives us a place to document things like this and to suppress them so we could in theory get a complete clean 'make check' run with the leak sanitizer on. It might be nice if there was an easy way to enable all our "recommended sanitizer settings" (ASAN_OPTIONS="fast_unwind_on_malloc=0 is pretty much required to get useful backtraces, for instance), but I'm not sure there's a neat way to do that. scripts/lsan-suppressions.txt | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 scripts/lsan-suppressions.txt