diff mbox series

[v6] virtio-net: Fix network stall at the host side waiting for kick

Message ID 20240630063615.40467-1-east.moutain.yang@gmail.com
State New
Headers show
Series [v6] virtio-net: Fix network stall at the host side waiting for kick | expand

Commit Message

Wencheng Yang June 30, 2024, 6:36 a.m. UTC
From: thomas <east.moutain.yang@gmail.com>

Patch 06b12970174 ("virtio-net: fix network stall under load")
added double-check to test whether the available buffer size
can satisfy the request or not, in case the guest has added
some buffers to the avail ring simultaneously after the first
check. It will be lucky if the available buffer size becomes
okay after the double-check, then the host can send the packet
to the guest. If the buffer size still can't satisfy the request,
even if the guest has added some buffers, viritio-net would
stall at the host side forever.

The patch checks whether the guest has added some buffers
after last check of avail idx when the available buffers are
not sufficient, if so then recheck the available buffers
in the loop.

The patch also reverts patch "06b12970174".

The case below can reproduce the stall.

                                       Guest 0
                                     +--------+
                                     | iperf  |
                    ---------------> | server |
         Host       |                +--------+
       +--------+   |                    ...
       | iperf  |----
       | client |----                  Guest n
       +--------+   |                +--------+
                    |                | iperf  |
                    ---------------> | server |
                                     +--------+

Boot many guests from qemu with virtio network:
 qemu ... -netdev tap,id=net_x \
    -device virtio-net-pci-non-transitional,\
    iommu_platform=on,mac=xx:xx:xx:xx:xx:xx,netdev=net_x

Each guest acts as iperf server with commands below:
 iperf3 -s -D -i 10 -p 8001
 iperf3 -s -D -i 10 -p 8002

The host as iperf client:
 iperf3 -c guest_IP -p 8001 -i 30 -w 256k -P 20 -t 40000
 iperf3 -c guest_IP -p 8002 -i 30 -w 256k -P 20 -t 40000

After some time, the host loses connection to the guest,
the guest can send packet to the host, but can't receive
packet from host.

It's more likely to happen if SWIOTLB is enabled in the guest,
allocating and freeing bounce buffer takes some CPU ticks,
copying from/to bounce buffer takes more CPU ticks, compared
with that there is no bounce buffer in the guest.
Once the rate of producing packets from the host approximates
the rate of receiveing packets in the guest, the guest would
loop in NAPI.

         receive packets    ---
               |             |
               v             |
           free buf      virtnet_poll
               |             |
               v             |
     add buf to avail ring  ---
               |
               |  need kick the host?
               |  NAPI continues
               v
         receive packets    ---
               |             |
               v             |
           free buf      virtnet_poll
               |             |
               v             |
     add buf to avail ring  ---
               |
               v
              ...           ...

On the other hand, the host fetches free buf from avail
ring, if the buf in the avail ring is not enough, the
host notifies the guest the event by writing the avail
idx read from avail ring to the event idx of used ring,
then the host goes to sleep, waiting for the kick signal
from the guest.

Once the guest finds the host is waiting for kick singal
(in virtqueue_kick_prepare_split()), it kicks the host.

The host may stall forever at the sequences below:

         Host                        Guest
     ------------                 -----------
 fetch buf, send packet           receive packet ---
         ...                          ...         |
 fetch buf, send packet             add buf       |
         ...                        add buf   virtnet_poll
    buf not enough      avail idx-> add buf       |
    read avail idx                  add buf       |
                                    add buf      ---
                                  receive packet ---
    write event idx                   ...         |
    waiting for kick                 add buf   virtnet_poll
                                      ...         |
                                                 ---
                                 no more packet, exit NAPI

In the first loop of NAPI above, indicated in the range of
virtnet_poll above, the host is sending packets while the
guest is receiving packets and adding buf.
 step 1: The buf is not enough, for example, a big packet
         needs 5 buf, but the available buf count is 3.
         The host read current avail idx.
 step 2: The guest adds some buf, then checks whether the
         host is waiting for kick signal, not at this time.
         The used ring is not empty, the guest continues
         the second loop of NAPI.
 step 3: The host writes the avail idx read from avail
         ring to used ring as event idx via
         virtio_queue_set_notification(q->rx_vq, 1).
 step 4: At the end of the second loop of NAPI, recheck
         whether kick is needed, as the event idx in the
         used ring written by the host is beyound the
         range of kick condition, the guest will not
         send kick signal to the host.

Changelog:
v6:
- Take packed queue into cosideration
- Adjust function sequence to fix compilation issue

v5:
- Modify return type of virtio_queue_set_notification() to
  bool to indicate whether the guest has added some buffers
  after last check of avail idx
- Loop in virtio_net_has_buffers() if the available buffers
  are not sufficient and the guest has added some buffers.
- Revert patch "06b12970174"
- Update the subject

v4:
- Correct spelling mistake in the subject
- Describe the issue that virtio-net is blocked at host side

v3:
- Add virtio-net tag in the subject
- Refine commit log

v2:
- Add SOB tag at the end of the commit message
- Place Fixes tag at the end of the commit message

v1:
- Initial patch

Fixes: 06b12970174 ("virtio-net: fix network stall under load")
Signed-off-by: Wencheng Yang <east.moutain.yang@gmail.com>
---
 hw/net/virtio-net.c        |  19 ++---
 hw/virtio/virtio.c         | 157 ++++++++++++++++++++-----------------
 include/hw/virtio/virtio.h |   2 +-
 3 files changed, 96 insertions(+), 82 deletions(-)

Comments

Michael S. Tsirkin June 30, 2024, 4:44 p.m. UTC | #1
Thanks for the patch!
Yes something to improve:


On Sun, Jun 30, 2024 at 02:36:15PM +0800, Wencheng Yang wrote:
> From: thomas <east.moutain.yang@gmail.com>
> 
> Patch 06b12970174 ("virtio-net: fix network stall under load")
> added double-check to test whether the available buffer size
> can satisfy the request or not, in case the guest has added
> some buffers to the avail ring simultaneously after the first
> check. It will be lucky if the available buffer size becomes
> okay after the double-check, then the host can send the packet
> to the guest. If the buffer size still can't satisfy the request,
> even if the guest has added some buffers, viritio-net would
> stall at the host side forever.
> 
> The patch checks whether the guest has added some buffers
> after last check of avail idx when the available buffers are
> not sufficient, if so then recheck the available buffers
> in the loop.
> 
> The patch also reverts patch "06b12970174".
> 
> The case below can reproduce the stall.
> 
>                                        Guest 0
>                                      +--------+
>                                      | iperf  |
>                     ---------------> | server |
>          Host       |                +--------+
>        +--------+   |                    ...
>        | iperf  |----
>        | client |----                  Guest n
>        +--------+   |                +--------+
>                     |                | iperf  |
>                     ---------------> | server |
>                                      +--------+
> 
> Boot many guests from qemu with virtio network:
>  qemu ... -netdev tap,id=net_x \
>     -device virtio-net-pci-non-transitional,\
>     iommu_platform=on,mac=xx:xx:xx:xx:xx:xx,netdev=net_x
> 
> Each guest acts as iperf server with commands below:
>  iperf3 -s -D -i 10 -p 8001
>  iperf3 -s -D -i 10 -p 8002
> 
> The host as iperf client:
>  iperf3 -c guest_IP -p 8001 -i 30 -w 256k -P 20 -t 40000
>  iperf3 -c guest_IP -p 8002 -i 30 -w 256k -P 20 -t 40000
> 
> After some time, the host loses connection to the guest,
> the guest can send packet to the host, but can't receive
> packet from host.
> 
> It's more likely to happen if SWIOTLB is enabled in the guest,
> allocating and freeing bounce buffer takes some CPU ticks,
> copying from/to bounce buffer takes more CPU ticks, compared
> with that there is no bounce buffer in the guest.
> Once the rate of producing packets from the host approximates
> the rate of receiveing packets in the guest, the guest would
> loop in NAPI.
> 
>          receive packets    ---
>                |             |
>                v             |
>            free buf      virtnet_poll
>                |             |
>                v             |
>      add buf to avail ring  ---
>                |
>                |  need kick the host?
>                |  NAPI continues
>                v
>          receive packets    ---
>                |             |
>                v             |
>            free buf      virtnet_poll
>                |             |
>                v             |
>      add buf to avail ring  ---
>                |
>                v
>               ...           ...
> 
> On the other hand, the host fetches free buf from avail
> ring, if the buf in the avail ring is not enough, the
> host notifies the guest the event by writing the avail
> idx read from avail ring to the event idx of used ring,
> then the host goes to sleep, waiting for the kick signal
> from the guest.
> 
> Once the guest finds the host is waiting for kick singal
> (in virtqueue_kick_prepare_split()), it kicks the host.
> 
> The host may stall forever at the sequences below:
> 
>          Host                        Guest
>      ------------                 -----------
>  fetch buf, send packet           receive packet ---
>          ...                          ...         |
>  fetch buf, send packet             add buf       |
>          ...                        add buf   virtnet_poll
>     buf not enough      avail idx-> add buf       |
>     read avail idx                  add buf       |
>                                     add buf      ---
>                                   receive packet ---
>     write event idx                   ...         |
>     waiting for kick                 add buf   virtnet_poll
>                                       ...         |
>                                                  ---
>                                  no more packet, exit NAPI
> 
> In the first loop of NAPI above, indicated in the range of
> virtnet_poll above, the host is sending packets while the
> guest is receiving packets and adding buf.
>  step 1: The buf is not enough, for example, a big packet
>          needs 5 buf, but the available buf count is 3.
>          The host read current avail idx.
>  step 2: The guest adds some buf, then checks whether the
>          host is waiting for kick signal, not at this time.
>          The used ring is not empty, the guest continues
>          the second loop of NAPI.
>  step 3: The host writes the avail idx read from avail
>          ring to used ring as event idx via
>          virtio_queue_set_notification(q->rx_vq, 1).
>  step 4: At the end of the second loop of NAPI, recheck
>          whether kick is needed, as the event idx in the
>          used ring written by the host is beyound the
>          range of kick condition, the guest will not
>          send kick signal to the host.

Put changelog after --- please.

> Changelog:
> v6:
> - Take packed queue into cosideration
> - Adjust function sequence to fix compilation issue
> 
> v5:
> - Modify return type of virtio_queue_set_notification() to
>   bool to indicate whether the guest has added some buffers
>   after last check of avail idx
> - Loop in virtio_net_has_buffers() if the available buffers
>   are not sufficient and the guest has added some buffers.
> - Revert patch "06b12970174"
> - Update the subject
> 
> v4:
> - Correct spelling mistake in the subject
> - Describe the issue that virtio-net is blocked at host side
> 
> v3:
> - Add virtio-net tag in the subject
> - Refine commit log
> 
> v2:
> - Add SOB tag at the end of the commit message
> - Place Fixes tag at the end of the commit message
> 
> v1:
> - Initial patch
> 
> Fixes: 06b12970174 ("virtio-net: fix network stall under load")
> Signed-off-by: Wencheng Yang <east.moutain.yang@gmail.com>
> ---
>  hw/net/virtio-net.c        |  19 ++---
>  hw/virtio/virtio.c         | 157 ++++++++++++++++++++-----------------
>  include/hw/virtio/virtio.h |   2 +-
>  3 files changed, 96 insertions(+), 82 deletions(-)
> 
> diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
> index 9c7e85caea..13affc1f35 100644
> --- a/hw/net/virtio-net.c
> +++ b/hw/net/virtio-net.c
> @@ -1642,18 +1642,15 @@ static bool virtio_net_can_receive(NetClientState *nc)
>  static int virtio_net_has_buffers(VirtIONetQueue *q, int bufsize)
>  {
>      VirtIONet *n = q->n;
> -    if (virtio_queue_empty(q->rx_vq) ||
> -        (n->mergeable_rx_bufs &&
> -         !virtqueue_avail_bytes(q->rx_vq, bufsize, 0))) {
> -        virtio_queue_set_notification(q->rx_vq, 1);
> -
> -        /* To avoid a race condition where the guest has made some buffers
> -         * available after the above check but before notification was
> -         * enabled, check for available buffers again.
> -         */
> -        if (virtio_queue_empty(q->rx_vq) ||
> +
> +    while (virtio_queue_empty(q->rx_vq) ||
>              (n->mergeable_rx_bufs &&
> -             !virtqueue_avail_bytes(q->rx_vq, bufsize, 0))) {
> +            !virtqueue_avail_bytes(q->rx_vq, bufsize, 0))) {
> +        /* guest may have made some buf, try again */
> +        if (virtio_queue_set_notification(q->rx_vq, 1)) {
> +            virtio_queue_set_notification(q->rx_vq, 0);
> +            continue;
> +        } else {
>              return 0;
>          }
>      }
> diff --git a/hw/virtio/virtio.c b/hw/virtio/virtio.c
> index 893a072c9d..24eaf4d88d 100644
> --- a/hw/virtio/virtio.c
> +++ b/hw/virtio/virtio.c
> @@ -507,76 +507,6 @@ static inline void vring_set_avail_event(VirtQueue *vq, uint16_t val)
>      address_space_cache_invalidate(&caches->used, pa, sizeof(val));
>  }
>  
> -static void virtio_queue_split_set_notification(VirtQueue *vq, int enable)
> -{
> -    RCU_READ_LOCK_GUARD();
> -
> -    if (virtio_vdev_has_feature(vq->vdev, VIRTIO_RING_F_EVENT_IDX)) {
> -        vring_set_avail_event(vq, vring_avail_idx(vq));
> -    } else if (enable) {
> -        vring_used_flags_unset_bit(vq, VRING_USED_F_NO_NOTIFY);
> -    } else {
> -        vring_used_flags_set_bit(vq, VRING_USED_F_NO_NOTIFY);
> -    }
> -    if (enable) {
> -        /* Expose avail event/used flags before caller checks the avail idx. */
> -        smp_mb();
> -    }
> -}
> -
> -static void virtio_queue_packed_set_notification(VirtQueue *vq, int enable)
> -{
> -    uint16_t off_wrap;
> -    VRingPackedDescEvent e;
> -    VRingMemoryRegionCaches *caches;
> -
> -    RCU_READ_LOCK_GUARD();
> -    caches = vring_get_region_caches(vq);
> -    if (!caches) {
> -        return;
> -    }
> -
> -    vring_packed_event_read(vq->vdev, &caches->used, &e);
> -
> -    if (!enable) {
> -        e.flags = VRING_PACKED_EVENT_FLAG_DISABLE;
> -    } else if (virtio_vdev_has_feature(vq->vdev, VIRTIO_RING_F_EVENT_IDX)) {
> -        off_wrap = vq->shadow_avail_idx | vq->shadow_avail_wrap_counter << 15;
> -        vring_packed_off_wrap_write(vq->vdev, &caches->used, off_wrap);
> -        /* Make sure off_wrap is wrote before flags */
> -        smp_wmb();
> -        e.flags = VRING_PACKED_EVENT_FLAG_DESC;
> -    } else {
> -        e.flags = VRING_PACKED_EVENT_FLAG_ENABLE;
> -    }
> -
> -    vring_packed_flags_write(vq->vdev, &caches->used, e.flags);
> -    if (enable) {
> -        /* Expose avail event/used flags before caller checks the avail idx. */
> -        smp_mb();
> -    }
> -}
> -
> -bool virtio_queue_get_notification(VirtQueue *vq)
> -{
> -    return vq->notification;
> -}
> -
> -void virtio_queue_set_notification(VirtQueue *vq, int enable)
> -{
> -    vq->notification = enable;
> -
> -    if (!vq->vring.desc) {
> -        return;
> -    }
> -
> -    if (virtio_vdev_has_feature(vq->vdev, VIRTIO_F_RING_PACKED)) {
> -        virtio_queue_packed_set_notification(vq, enable);
> -    } else {
> -        virtio_queue_split_set_notification(vq, enable);
> -    }
> -}
> -
>  int virtio_queue_ready(VirtQueue *vq)
>  {
>      return vq->vring.avail != 0;
> @@ -668,6 +598,93 @@ static inline bool is_desc_avail(uint16_t flags, bool wrap_counter)
>      return (avail != used) && (avail == wrap_counter);
>  }
>  
> +static bool virtio_queue_split_set_notification(VirtQueue *vq, int enable)
> +{
> +    uint16_t shadow_idx;
> +
> +    RCU_READ_LOCK_GUARD();
> +
> +    shadow_idx = vq->shadow_avail_idx;
> +    if (virtio_vdev_has_feature(vq->vdev, VIRTIO_RING_F_EVENT_IDX)) {
> +        vring_set_avail_event(vq, vring_avail_idx(vq));
> +    } else if (enable) {
> +        vring_used_flags_unset_bit(vq, VRING_USED_F_NO_NOTIFY);
> +    } else {
> +        vring_used_flags_set_bit(vq, VRING_USED_F_NO_NOTIFY);
> +    }
> +    if (enable) {
> +        /* Expose avail event/used flags before caller checks the avail idx. */
> +        smp_mb();
> +
> +        /* If shadow_avail_idx is changed, guest has added some bufs */
> +        return shadow_idx != vring_avail_idx(vq);
> +    }
> +
> +    return false;
> +}
> +
> +static bool virtio_queue_packed_set_notification(VirtQueue *vq, int enable)
> +{
> +    uint16_t off_wrap;
> +    VRingPackedDesc desc;
> +    VRingPackedDescEvent e;
> +    VRingMemoryRegionCaches *caches;
> +
> +    RCU_READ_LOCK_GUARD();
> +    caches = vring_get_region_caches(vq);
> +    if (!caches) {
> +        return false;
> +    }
> +
> +    vring_packed_event_read(vq->vdev, &caches->used, &e);
> +
> +    if (!enable) {
> +        e.flags = VRING_PACKED_EVENT_FLAG_DISABLE;
> +    } else if (virtio_vdev_has_feature(vq->vdev, VIRTIO_RING_F_EVENT_IDX)) {
> +        off_wrap = vq->shadow_avail_idx | vq->shadow_avail_wrap_counter << 15;
> +        vring_packed_off_wrap_write(vq->vdev, &caches->used, off_wrap);
> +        /* Make sure off_wrap is wrote before flags */
> +        smp_wmb();
> +        e.flags = VRING_PACKED_EVENT_FLAG_DESC;
> +    } else {
> +        e.flags = VRING_PACKED_EVENT_FLAG_ENABLE;
> +    }
> +
> +    vring_packed_flags_write(vq->vdev, &caches->used, e.flags);
> +    if (enable) {
> +        /* Expose avail event/used flags before caller checks the avail idx. */
> +        smp_mb();
> +
> +        /* If shadow_avail_idx becomes available, guest has added some bufs */
> +        vring_packed_desc_read(vq->vdev, &desc, &caches->desc,
> +                               vq->shadow_avail_idx, true);
> +        if (is_desc_avail(desc.flags, vq->shadow_avail_wrap_counter))
> +            return true;
> +    }
> +
> +    return false;
> +}
> +
> +bool virtio_queue_get_notification(VirtQueue *vq)
> +{
> +    return vq->notification;
> +}
> +
> +bool virtio_queue_set_notification(VirtQueue *vq, int enable)
> +{
> +    vq->notification = enable;
> +
> +    if (!vq->vring.desc) {
> +        return false;
> +    }
> +
> +    if (virtio_vdev_has_feature(vq->vdev, VIRTIO_F_RING_PACKED)) {
> +        return virtio_queue_packed_set_notification(vq, enable);
> +    } else {
> +        return virtio_queue_split_set_notification(vq, enable);
> +    }
> +}
> +

I think that the patch would be much smaller if you just
added virtio_queue_set_notification_and_check.
This way you are also not slowing down existing users
of virtio_queue_set_notification.


Also, I went over users of virtio_queue_set_notification:
blk,scsi all look ok, but I found at least another buggy one:
virtio_ballloon_get_free_page_hints 



I also wonder about the users in virtio.c:

static void virtio_queue_host_notifier_aio_poll_end(EventNotifier *n)
{
    VirtQueue *vq = container_of(n, VirtQueue, host_notifier);

    /* Caller polls once more after this to catch requests that race with us */
    virtio_queue_set_notification(vq, 1);
}
    
void virtio_queue_aio_attach_host_notifier(VirtQueue *vq, AioContext *ctx)
{   
    /*  
     * virtio_queue_aio_detach_host_notifier() can leave notifications disabled.
     * Re-enable them.  (And if detach has not been used before, notifications
     * being enabled is still the default state while a notifier is attached;
     * see virtio_queue_host_notifier_aio_poll_end(), which will always leave
     * notifications enabled once the polling section is left.)
     */ 
    if (!virtio_queue_get_notification(vq)) {
        virtio_queue_set_notification(vq, 1);
    }

    aio_set_event_notifier(ctx, &vq->host_notifier,
                           virtio_queue_host_notifier_read,
                           virtio_queue_host_notifier_aio_poll,
                           virtio_queue_host_notifier_aio_poll_ready);
    aio_set_event_notifier_poll(ctx, &vq->host_notifier,
                                virtio_queue_host_notifier_aio_poll_begin,
                                virtio_queue_host_notifier_aio_poll_end);

    /*
     * We will have ignored notifications about new requests from the guest
     * while no notifiers were attached, so "kick" the virt queue to process
     * those requests now.
     */
    event_notifier_set(&vq->host_notifier);
}

void virtio_queue_aio_attach_host_notifier_no_poll(VirtQueue *vq, AioContext *ctx)
{
    /* See virtio_queue_aio_attach_host_notifier() */
    if (!virtio_queue_get_notification(vq)) {
        virtio_queue_set_notification(vq, 1);
    }

    aio_set_event_notifier(ctx, &vq->host_notifier,
                           virtio_queue_host_notifier_read,
                           NULL, NULL);

    /*
     * See virtio_queue_aio_attach_host_notifier().
     * Note that this may be unnecessary for the type of virtqueues this
     * function is used for.  Still, it will not hurt to have a quick look into
     * whether we can/should process any of the virtqueue elements.
     */
    event_notifier_set(&vq->host_notifier);
}



These three look fundamentally racy:

Cc people who touched this area.

Stefan, Kevin, what do you guys think?


>  /* Fetch avail_idx from VQ memory only when we really need to know if
>   * guest has added some buffers.
>   * Called within rcu_read_lock().  */
> diff --git a/include/hw/virtio/virtio.h b/include/hw/virtio/virtio.h
> index 7d5ffdc145..e1a1621e2d 100644
> --- a/include/hw/virtio/virtio.h
> +++ b/include/hw/virtio/virtio.h
> @@ -301,7 +301,7 @@ int virtio_load(VirtIODevice *vdev, QEMUFile *f, int version_id);
>  void virtio_notify_config(VirtIODevice *vdev);
>  
>  bool virtio_queue_get_notification(VirtQueue *vq);
> -void virtio_queue_set_notification(VirtQueue *vq, int enable);
> +bool virtio_queue_set_notification(VirtQueue *vq, int enable);
>  
>  int virtio_queue_ready(VirtQueue *vq);
>  
> -- 
> 2.39.0
diff mbox series

Patch

diff --git a/hw/net/virtio-net.c b/hw/net/virtio-net.c
index 9c7e85caea..13affc1f35 100644
--- a/hw/net/virtio-net.c
+++ b/hw/net/virtio-net.c
@@ -1642,18 +1642,15 @@  static bool virtio_net_can_receive(NetClientState *nc)
 static int virtio_net_has_buffers(VirtIONetQueue *q, int bufsize)
 {
     VirtIONet *n = q->n;
-    if (virtio_queue_empty(q->rx_vq) ||
-        (n->mergeable_rx_bufs &&
-         !virtqueue_avail_bytes(q->rx_vq, bufsize, 0))) {
-        virtio_queue_set_notification(q->rx_vq, 1);
-
-        /* To avoid a race condition where the guest has made some buffers
-         * available after the above check but before notification was
-         * enabled, check for available buffers again.
-         */
-        if (virtio_queue_empty(q->rx_vq) ||
+
+    while (virtio_queue_empty(q->rx_vq) ||
             (n->mergeable_rx_bufs &&
-             !virtqueue_avail_bytes(q->rx_vq, bufsize, 0))) {
+            !virtqueue_avail_bytes(q->rx_vq, bufsize, 0))) {
+        /* guest may have made some buf, try again */
+        if (virtio_queue_set_notification(q->rx_vq, 1)) {
+            virtio_queue_set_notification(q->rx_vq, 0);
+            continue;
+        } else {
             return 0;
         }
     }
diff --git a/hw/virtio/virtio.c b/hw/virtio/virtio.c
index 893a072c9d..24eaf4d88d 100644
--- a/hw/virtio/virtio.c
+++ b/hw/virtio/virtio.c
@@ -507,76 +507,6 @@  static inline void vring_set_avail_event(VirtQueue *vq, uint16_t val)
     address_space_cache_invalidate(&caches->used, pa, sizeof(val));
 }
 
-static void virtio_queue_split_set_notification(VirtQueue *vq, int enable)
-{
-    RCU_READ_LOCK_GUARD();
-
-    if (virtio_vdev_has_feature(vq->vdev, VIRTIO_RING_F_EVENT_IDX)) {
-        vring_set_avail_event(vq, vring_avail_idx(vq));
-    } else if (enable) {
-        vring_used_flags_unset_bit(vq, VRING_USED_F_NO_NOTIFY);
-    } else {
-        vring_used_flags_set_bit(vq, VRING_USED_F_NO_NOTIFY);
-    }
-    if (enable) {
-        /* Expose avail event/used flags before caller checks the avail idx. */
-        smp_mb();
-    }
-}
-
-static void virtio_queue_packed_set_notification(VirtQueue *vq, int enable)
-{
-    uint16_t off_wrap;
-    VRingPackedDescEvent e;
-    VRingMemoryRegionCaches *caches;
-
-    RCU_READ_LOCK_GUARD();
-    caches = vring_get_region_caches(vq);
-    if (!caches) {
-        return;
-    }
-
-    vring_packed_event_read(vq->vdev, &caches->used, &e);
-
-    if (!enable) {
-        e.flags = VRING_PACKED_EVENT_FLAG_DISABLE;
-    } else if (virtio_vdev_has_feature(vq->vdev, VIRTIO_RING_F_EVENT_IDX)) {
-        off_wrap = vq->shadow_avail_idx | vq->shadow_avail_wrap_counter << 15;
-        vring_packed_off_wrap_write(vq->vdev, &caches->used, off_wrap);
-        /* Make sure off_wrap is wrote before flags */
-        smp_wmb();
-        e.flags = VRING_PACKED_EVENT_FLAG_DESC;
-    } else {
-        e.flags = VRING_PACKED_EVENT_FLAG_ENABLE;
-    }
-
-    vring_packed_flags_write(vq->vdev, &caches->used, e.flags);
-    if (enable) {
-        /* Expose avail event/used flags before caller checks the avail idx. */
-        smp_mb();
-    }
-}
-
-bool virtio_queue_get_notification(VirtQueue *vq)
-{
-    return vq->notification;
-}
-
-void virtio_queue_set_notification(VirtQueue *vq, int enable)
-{
-    vq->notification = enable;
-
-    if (!vq->vring.desc) {
-        return;
-    }
-
-    if (virtio_vdev_has_feature(vq->vdev, VIRTIO_F_RING_PACKED)) {
-        virtio_queue_packed_set_notification(vq, enable);
-    } else {
-        virtio_queue_split_set_notification(vq, enable);
-    }
-}
-
 int virtio_queue_ready(VirtQueue *vq)
 {
     return vq->vring.avail != 0;
@@ -668,6 +598,93 @@  static inline bool is_desc_avail(uint16_t flags, bool wrap_counter)
     return (avail != used) && (avail == wrap_counter);
 }
 
+static bool virtio_queue_split_set_notification(VirtQueue *vq, int enable)
+{
+    uint16_t shadow_idx;
+
+    RCU_READ_LOCK_GUARD();
+
+    shadow_idx = vq->shadow_avail_idx;
+    if (virtio_vdev_has_feature(vq->vdev, VIRTIO_RING_F_EVENT_IDX)) {
+        vring_set_avail_event(vq, vring_avail_idx(vq));
+    } else if (enable) {
+        vring_used_flags_unset_bit(vq, VRING_USED_F_NO_NOTIFY);
+    } else {
+        vring_used_flags_set_bit(vq, VRING_USED_F_NO_NOTIFY);
+    }
+    if (enable) {
+        /* Expose avail event/used flags before caller checks the avail idx. */
+        smp_mb();
+
+        /* If shadow_avail_idx is changed, guest has added some bufs */
+        return shadow_idx != vring_avail_idx(vq);
+    }
+
+    return false;
+}
+
+static bool virtio_queue_packed_set_notification(VirtQueue *vq, int enable)
+{
+    uint16_t off_wrap;
+    VRingPackedDesc desc;
+    VRingPackedDescEvent e;
+    VRingMemoryRegionCaches *caches;
+
+    RCU_READ_LOCK_GUARD();
+    caches = vring_get_region_caches(vq);
+    if (!caches) {
+        return false;
+    }
+
+    vring_packed_event_read(vq->vdev, &caches->used, &e);
+
+    if (!enable) {
+        e.flags = VRING_PACKED_EVENT_FLAG_DISABLE;
+    } else if (virtio_vdev_has_feature(vq->vdev, VIRTIO_RING_F_EVENT_IDX)) {
+        off_wrap = vq->shadow_avail_idx | vq->shadow_avail_wrap_counter << 15;
+        vring_packed_off_wrap_write(vq->vdev, &caches->used, off_wrap);
+        /* Make sure off_wrap is wrote before flags */
+        smp_wmb();
+        e.flags = VRING_PACKED_EVENT_FLAG_DESC;
+    } else {
+        e.flags = VRING_PACKED_EVENT_FLAG_ENABLE;
+    }
+
+    vring_packed_flags_write(vq->vdev, &caches->used, e.flags);
+    if (enable) {
+        /* Expose avail event/used flags before caller checks the avail idx. */
+        smp_mb();
+
+        /* If shadow_avail_idx becomes available, guest has added some bufs */
+        vring_packed_desc_read(vq->vdev, &desc, &caches->desc,
+                               vq->shadow_avail_idx, true);
+        if (is_desc_avail(desc.flags, vq->shadow_avail_wrap_counter))
+            return true;
+    }
+
+    return false;
+}
+
+bool virtio_queue_get_notification(VirtQueue *vq)
+{
+    return vq->notification;
+}
+
+bool virtio_queue_set_notification(VirtQueue *vq, int enable)
+{
+    vq->notification = enable;
+
+    if (!vq->vring.desc) {
+        return false;
+    }
+
+    if (virtio_vdev_has_feature(vq->vdev, VIRTIO_F_RING_PACKED)) {
+        return virtio_queue_packed_set_notification(vq, enable);
+    } else {
+        return virtio_queue_split_set_notification(vq, enable);
+    }
+}
+
 /* Fetch avail_idx from VQ memory only when we really need to know if
  * guest has added some buffers.
  * Called within rcu_read_lock().  */
diff --git a/include/hw/virtio/virtio.h b/include/hw/virtio/virtio.h
index 7d5ffdc145..e1a1621e2d 100644
--- a/include/hw/virtio/virtio.h
+++ b/include/hw/virtio/virtio.h
@@ -301,7 +301,7 @@  int virtio_load(VirtIODevice *vdev, QEMUFile *f, int version_id);
 void virtio_notify_config(VirtIODevice *vdev);
 
 bool virtio_queue_get_notification(VirtQueue *vq);
-void virtio_queue_set_notification(VirtQueue *vq, int enable);
+bool virtio_queue_set_notification(VirtQueue *vq, int enable);
 
 int virtio_queue_ready(VirtQueue *vq);