| Message ID | 20240613154406.1365469-10-berrange@redhat.com |
|---|---|
| State | New |
| Headers | show |
| Series | qga: clean up command source locations and conditionals | expand |
On 13/6/24 17:43, Daniel P. Berrangé wrote: > Rather than creating stubs for every command that just return > QERR_UNSUPPORTED, use 'if' conditions in the schema to fully > exclude generation of the filesystem trimming commands on POSIX > platforms lacking required APIs. > > The command will be rejected at QMP dispatch time instead, > avoiding reimplementing rejection by blocking the stub commands. > This changes the error message for affected commands from > > {"class": "CommandNotFound", "desc": "Command FOO has been disabled"} > > to > > {"class": "CommandNotFound", "desc": "The command FOO has not been found"} > > This has the additional benefit that the QGA protocol reference > now documents what conditions enable use of the command. > > Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> > --- > qga/commands-linux.c | 8 -------- > qga/qapi-schema.json | 8 ++++---- > 2 files changed, 4 insertions(+), 12 deletions(-) Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com> On Thu, Jun 13, 2024 at 6:44 PM Daniel P. Berrangé <berrange@redhat.com> wrote: > Rather than creating stubs for every command that just return > QERR_UNSUPPORTED, use 'if' conditions in the schema to fully > exclude generation of the filesystem trimming commands on POSIX > platforms lacking required APIs. > > The command will be rejected at QMP dispatch time instead, > avoiding reimplementing rejection by blocking the stub commands. > This changes the error message for affected commands from > > {"class": "CommandNotFound", "desc": "Command FOO has been disabled"} > > to > > {"class": "CommandNotFound", "desc": "The command FOO has not been > found"} > > This has the additional benefit that the QGA protocol reference > now documents what conditions enable use of the command. > > Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> > --- > qga/commands-linux.c | 8 -------- > qga/qapi-schema.json | 8 ++++---- > 2 files changed, 4 insertions(+), 12 deletions(-) > > diff --git a/qga/commands-linux.c b/qga/commands-linux.c > index 73b13fbaf6..89bdcded01 100644 > --- a/qga/commands-linux.c > +++ b/qga/commands-linux.c > @@ -1049,14 +1049,6 @@ GuestDiskInfoList *qmp_guest_get_disks(Error **errp) > return ret; > } > > -#else > - > -GuestDiskInfoList *qmp_guest_get_disks(Error **errp) > -{ > - error_setg(errp, QERR_UNSUPPORTED); > - return NULL; > -} > - > #endif > > /* Return a list of the disk device(s)' info which @mount lies on */ > diff --git a/qga/qapi-schema.json b/qga/qapi-schema.json > index 0f27375ea0..0b7f911ca5 100644 > --- a/qga/qapi-schema.json > +++ b/qga/qapi-schema.json > @@ -985,7 +985,7 @@ > 'media-errors-hi': 'uint64', > 'number-of-error-log-entries-lo': 'uint64', > 'number-of-error-log-entries-hi': 'uint64' }, > - 'if': { 'any': [ 'CONFIG_WIN32', 'CONFIG_LINUX' ] } } > + 'if': { 'any': [ 'CONFIG_WIN32', 'CONFIG_LIBUDEV' ] } } > > ## > # @GuestDiskSmart: > @@ -1000,7 +1000,7 @@ > 'base': { 'type': 'GuestDiskBusType' }, > 'discriminator': 'type', > 'data': { 'nvme': 'GuestNVMeSmart' }, > - 'if': { 'any': [ 'CONFIG_WIN32', 'CONFIG_LINUX' ] } } > + 'if': { 'any': [ 'CONFIG_WIN32', 'CONFIG_LIBUDEV' ] } } > > ## > # @GuestDiskInfo: > @@ -1026,7 +1026,7 @@ > 'data': {'name': 'str', 'partition': 'bool', '*dependencies': ['str'], > '*address': 'GuestDiskAddress', '*alias': 'str', > '*smart': 'GuestDiskSmart'}, > - 'if': { 'any': [ 'CONFIG_WIN32', 'CONFIG_LINUX' ] } } > + 'if': { 'any': [ 'CONFIG_WIN32', 'CONFIG_LIBUDEV' ] } } > > ## > # @guest-get-disks: > @@ -1040,7 +1040,7 @@ > ## > { 'command': 'guest-get-disks', > 'returns': ['GuestDiskInfo'], > - 'if': { 'any': [ 'CONFIG_WIN32', 'CONFIG_LINUX' ] } } > + 'if': { 'any': [ 'CONFIG_WIN32', 'CONFIG_LIBUDEV' ] } } > > ## > # @GuestFilesystemInfo: > -- > 2.45.1 > >
diff --git a/qga/commands-linux.c b/qga/commands-linux.c index 73b13fbaf6..89bdcded01 100644 --- a/qga/commands-linux.c +++ b/qga/commands-linux.c @@ -1049,14 +1049,6 @@ GuestDiskInfoList *qmp_guest_get_disks(Error **errp) return ret; } -#else - -GuestDiskInfoList *qmp_guest_get_disks(Error **errp) -{ - error_setg(errp, QERR_UNSUPPORTED); - return NULL; -} - #endif /* Return a list of the disk device(s)' info which @mount lies on */ diff --git a/qga/qapi-schema.json b/qga/qapi-schema.json index 0f27375ea0..0b7f911ca5 100644 --- a/qga/qapi-schema.json +++ b/qga/qapi-schema.json @@ -985,7 +985,7 @@ 'media-errors-hi': 'uint64', 'number-of-error-log-entries-lo': 'uint64', 'number-of-error-log-entries-hi': 'uint64' }, - 'if': { 'any': [ 'CONFIG_WIN32', 'CONFIG_LINUX' ] } } + 'if': { 'any': [ 'CONFIG_WIN32', 'CONFIG_LIBUDEV' ] } } ## # @GuestDiskSmart: @@ -1000,7 +1000,7 @@ 'base': { 'type': 'GuestDiskBusType' }, 'discriminator': 'type', 'data': { 'nvme': 'GuestNVMeSmart' }, - 'if': { 'any': [ 'CONFIG_WIN32', 'CONFIG_LINUX' ] } } + 'if': { 'any': [ 'CONFIG_WIN32', 'CONFIG_LIBUDEV' ] } } ## # @GuestDiskInfo: @@ -1026,7 +1026,7 @@ 'data': {'name': 'str', 'partition': 'bool', '*dependencies': ['str'], '*address': 'GuestDiskAddress', '*alias': 'str', '*smart': 'GuestDiskSmart'}, - 'if': { 'any': [ 'CONFIG_WIN32', 'CONFIG_LINUX' ] } } + 'if': { 'any': [ 'CONFIG_WIN32', 'CONFIG_LIBUDEV' ] } } ## # @guest-get-disks: @@ -1040,7 +1040,7 @@ ## { 'command': 'guest-get-disks', 'returns': ['GuestDiskInfo'], - 'if': { 'any': [ 'CONFIG_WIN32', 'CONFIG_LINUX' ] } } + 'if': { 'any': [ 'CONFIG_WIN32', 'CONFIG_LIBUDEV' ] } } ## # @GuestFilesystemInfo:
Rather than creating stubs for every command that just return QERR_UNSUPPORTED, use 'if' conditions in the schema to fully exclude generation of the filesystem trimming commands on POSIX platforms lacking required APIs. The command will be rejected at QMP dispatch time instead, avoiding reimplementing rejection by blocking the stub commands. This changes the error message for affected commands from {"class": "CommandNotFound", "desc": "Command FOO has been disabled"} to {"class": "CommandNotFound", "desc": "The command FOO has not been found"} This has the additional benefit that the QGA protocol reference now documents what conditions enable use of the command. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> --- qga/commands-linux.c | 8 -------- qga/qapi-schema.json | 8 ++++---- 2 files changed, 4 insertions(+), 12 deletions(-)