| Message ID | 20231115071519.2864957-6-xiaoyao.li@intel.com |
|---|---|
| State | New |
| Headers | show |
| Series | QEMU Guest memfd + QEMU TDX support | expand |
On Wed, Nov 15, 2023 at 02:14:14AM -0500, Xiaoyao Li <xiaoyao.li@intel.com> wrote: > From: Chao Peng <chao.p.peng@linux.intel.com> > > Switch to KVM_SET_USER_MEMORY_REGION2 when supported by KVM. > > With KVM_SET_USER_MEMORY_REGION2, QEMU can set up memory region that > backend'ed both by hva-based shared memory and guest memfd based private > memory. > > Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> > Co-developed-by: Xiaoyao Li <xiaoyao.li@intel.com> > Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> > --- > accel/kvm/kvm-all.c | 56 ++++++++++++++++++++++++++++++++++------ > accel/kvm/trace-events | 2 +- > include/sysemu/kvm_int.h | 2 ++ > 3 files changed, 51 insertions(+), 9 deletions(-) > > diff --git a/accel/kvm/kvm-all.c b/accel/kvm/kvm-all.c > index 9f751d4971f8..69afeb47c9c0 100644 > --- a/accel/kvm/kvm-all.c > +++ b/accel/kvm/kvm-all.c > @@ -293,35 +293,69 @@ int kvm_physical_memory_addr_from_host(KVMState *s, void *ram, > static int kvm_set_user_memory_region(KVMMemoryListener *kml, KVMSlot *slot, bool new) > { > KVMState *s = kvm_state; > - struct kvm_userspace_memory_region mem; > + struct kvm_userspace_memory_region2 mem; > + static int cap_user_memory2 = -1; > int ret; > > + if (cap_user_memory2 == -1) { > + cap_user_memory2 = kvm_check_extension(s, KVM_CAP_USER_MEMORY2); > + } > + > + if (!cap_user_memory2 && slot->guest_memfd >= 0) { > + error_report("%s, KVM doesn't support KVM_CAP_USER_MEMORY2," > + " which is required by guest memfd!", __func__); > + exit(1); > + } > + > mem.slot = slot->slot | (kml->as_id << 16); > mem.guest_phys_addr = slot->start_addr; > mem.userspace_addr = (unsigned long)slot->ram; > mem.flags = slot->flags; > + mem.guest_memfd = slot->guest_memfd; > + mem.guest_memfd_offset = slot->guest_memfd_offset; > > if (slot->memory_size && !new && (mem.flags ^ slot->old_flags) & KVM_MEM_READONLY) { > /* Set the slot size to 0 before setting the slot to the desired > * value. This is needed based on KVM commit 75d61fbc. */ > mem.memory_size = 0; > - ret = kvm_vm_ioctl(s, KVM_SET_USER_MEMORY_REGION, &mem); > + > + if (cap_user_memory2) { > + ret = kvm_vm_ioctl(s, KVM_SET_USER_MEMORY_REGION2, &mem); > + } else { > + ret = kvm_vm_ioctl(s, KVM_SET_USER_MEMORY_REGION, &mem); > + } > if (ret < 0) { > goto err; > } > } > mem.memory_size = slot->memory_size; > - ret = kvm_vm_ioctl(s, KVM_SET_USER_MEMORY_REGION, &mem); > + if (cap_user_memory2) { > + ret = kvm_vm_ioctl(s, KVM_SET_USER_MEMORY_REGION2, &mem); > + } else { > + ret = kvm_vm_ioctl(s, KVM_SET_USER_MEMORY_REGION, &mem); > + } > slot->old_flags = mem.flags; > err: > trace_kvm_set_user_memory(mem.slot >> 16, (uint16_t)mem.slot, mem.flags, > mem.guest_phys_addr, mem.memory_size, > - mem.userspace_addr, ret); > + mem.userspace_addr, mem.guest_memfd, > + mem.guest_memfd_offset, ret); > if (ret < 0) { > - error_report("%s: KVM_SET_USER_MEMORY_REGION failed, slot=%d," > - " start=0x%" PRIx64 ", size=0x%" PRIx64 ": %s", > - __func__, mem.slot, slot->start_addr, > - (uint64_t)mem.memory_size, strerror(errno)); > + if (cap_user_memory2) { > + error_report("%s: KVM_SET_USER_MEMORY_REGION2 failed, slot=%d," > + " start=0x%" PRIx64 ", size=0x%" PRIx64 "," > + " flags=0x%" PRIx32 ", guest_memfd=%" PRId32 "," > + " guest_memfd_offset=0x%" PRIx64 ": %s", > + __func__, mem.slot, slot->start_addr, > + (uint64_t)mem.memory_size, mem.flags, > + mem.guest_memfd, (uint64_t)mem.guest_memfd_offset, > + strerror(errno)); > + } else { > + error_report("%s: KVM_SET_USER_MEMORY_REGION failed, slot=%d," > + " start=0x%" PRIx64 ", size=0x%" PRIx64 ": %s", > + __func__, mem.slot, slot->start_addr, > + (uint64_t)mem.memory_size, strerror(errno)); > + } > } > return ret; > } > @@ -477,6 +511,9 @@ static int kvm_mem_flags(MemoryRegion *mr) > if (readonly && kvm_readonly_mem_allowed) { > flags |= KVM_MEM_READONLY; > } > + if (memory_region_has_guest_memfd(mr)) { > + flags |= KVM_MEM_PRIVATE; > + } Nitpick: it was renamed to KVM_MEM_GUEST_MEMFD As long as the value is defined to same value, it doesn't matter, though.
On 11/18/2023 4:50 AM, Isaku Yamahata wrote: > On Wed, Nov 15, 2023 at 02:14:14AM -0500, > Xiaoyao Li <xiaoyao.li@intel.com> wrote: > >> From: Chao Peng <chao.p.peng@linux.intel.com> >> >> Switch to KVM_SET_USER_MEMORY_REGION2 when supported by KVM. >> >> With KVM_SET_USER_MEMORY_REGION2, QEMU can set up memory region that >> backend'ed both by hva-based shared memory and guest memfd based private >> memory. >> >> Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> >> Co-developed-by: Xiaoyao Li <xiaoyao.li@intel.com> >> Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> >> --- >> accel/kvm/kvm-all.c | 56 ++++++++++++++++++++++++++++++++++------ >> accel/kvm/trace-events | 2 +- >> include/sysemu/kvm_int.h | 2 ++ >> 3 files changed, 51 insertions(+), 9 deletions(-) >> >> diff --git a/accel/kvm/kvm-all.c b/accel/kvm/kvm-all.c >> index 9f751d4971f8..69afeb47c9c0 100644 >> --- a/accel/kvm/kvm-all.c >> +++ b/accel/kvm/kvm-all.c >> @@ -293,35 +293,69 @@ int kvm_physical_memory_addr_from_host(KVMState *s, void *ram, >> static int kvm_set_user_memory_region(KVMMemoryListener *kml, KVMSlot *slot, bool new) >> { >> KVMState *s = kvm_state; >> - struct kvm_userspace_memory_region mem; >> + struct kvm_userspace_memory_region2 mem; >> + static int cap_user_memory2 = -1; >> int ret; >> >> + if (cap_user_memory2 == -1) { >> + cap_user_memory2 = kvm_check_extension(s, KVM_CAP_USER_MEMORY2); >> + } >> + >> + if (!cap_user_memory2 && slot->guest_memfd >= 0) { >> + error_report("%s, KVM doesn't support KVM_CAP_USER_MEMORY2," >> + " which is required by guest memfd!", __func__); >> + exit(1); >> + } >> + >> mem.slot = slot->slot | (kml->as_id << 16); >> mem.guest_phys_addr = slot->start_addr; >> mem.userspace_addr = (unsigned long)slot->ram; >> mem.flags = slot->flags; >> + mem.guest_memfd = slot->guest_memfd; >> + mem.guest_memfd_offset = slot->guest_memfd_offset; >> >> if (slot->memory_size && !new && (mem.flags ^ slot->old_flags) & KVM_MEM_READONLY) { >> /* Set the slot size to 0 before setting the slot to the desired >> * value. This is needed based on KVM commit 75d61fbc. */ >> mem.memory_size = 0; >> - ret = kvm_vm_ioctl(s, KVM_SET_USER_MEMORY_REGION, &mem); >> + >> + if (cap_user_memory2) { >> + ret = kvm_vm_ioctl(s, KVM_SET_USER_MEMORY_REGION2, &mem); >> + } else { >> + ret = kvm_vm_ioctl(s, KVM_SET_USER_MEMORY_REGION, &mem); >> + } >> if (ret < 0) { >> goto err; >> } >> } >> mem.memory_size = slot->memory_size; >> - ret = kvm_vm_ioctl(s, KVM_SET_USER_MEMORY_REGION, &mem); >> + if (cap_user_memory2) { >> + ret = kvm_vm_ioctl(s, KVM_SET_USER_MEMORY_REGION2, &mem); >> + } else { >> + ret = kvm_vm_ioctl(s, KVM_SET_USER_MEMORY_REGION, &mem); >> + } >> slot->old_flags = mem.flags; >> err: >> trace_kvm_set_user_memory(mem.slot >> 16, (uint16_t)mem.slot, mem.flags, >> mem.guest_phys_addr, mem.memory_size, >> - mem.userspace_addr, ret); >> + mem.userspace_addr, mem.guest_memfd, >> + mem.guest_memfd_offset, ret); >> if (ret < 0) { >> - error_report("%s: KVM_SET_USER_MEMORY_REGION failed, slot=%d," >> - " start=0x%" PRIx64 ", size=0x%" PRIx64 ": %s", >> - __func__, mem.slot, slot->start_addr, >> - (uint64_t)mem.memory_size, strerror(errno)); >> + if (cap_user_memory2) { >> + error_report("%s: KVM_SET_USER_MEMORY_REGION2 failed, slot=%d," >> + " start=0x%" PRIx64 ", size=0x%" PRIx64 "," >> + " flags=0x%" PRIx32 ", guest_memfd=%" PRId32 "," >> + " guest_memfd_offset=0x%" PRIx64 ": %s", >> + __func__, mem.slot, slot->start_addr, >> + (uint64_t)mem.memory_size, mem.flags, >> + mem.guest_memfd, (uint64_t)mem.guest_memfd_offset, >> + strerror(errno)); >> + } else { >> + error_report("%s: KVM_SET_USER_MEMORY_REGION failed, slot=%d," >> + " start=0x%" PRIx64 ", size=0x%" PRIx64 ": %s", >> + __func__, mem.slot, slot->start_addr, >> + (uint64_t)mem.memory_size, strerror(errno)); >> + } >> } >> return ret; >> } >> @@ -477,6 +511,9 @@ static int kvm_mem_flags(MemoryRegion *mr) >> if (readonly && kvm_readonly_mem_allowed) { >> flags |= KVM_MEM_READONLY; >> } >> + if (memory_region_has_guest_memfd(mr)) { >> + flags |= KVM_MEM_PRIVATE; >> + } > > Nitpick: it was renamed to KVM_MEM_GUEST_MEMFD > As long as the value is defined to same value, it doesn't matter, though. thanks for the reminder! Will update the headers and switch to KVM_MEM_GUEST_MEMFD.
diff --git a/accel/kvm/kvm-all.c b/accel/kvm/kvm-all.c index 9f751d4971f8..69afeb47c9c0 100644 --- a/accel/kvm/kvm-all.c +++ b/accel/kvm/kvm-all.c @@ -293,35 +293,69 @@ int kvm_physical_memory_addr_from_host(KVMState *s, void *ram, static int kvm_set_user_memory_region(KVMMemoryListener *kml, KVMSlot *slot, bool new) { KVMState *s = kvm_state; - struct kvm_userspace_memory_region mem; + struct kvm_userspace_memory_region2 mem; + static int cap_user_memory2 = -1; int ret; + if (cap_user_memory2 == -1) { + cap_user_memory2 = kvm_check_extension(s, KVM_CAP_USER_MEMORY2); + } + + if (!cap_user_memory2 && slot->guest_memfd >= 0) { + error_report("%s, KVM doesn't support KVM_CAP_USER_MEMORY2," + " which is required by guest memfd!", __func__); + exit(1); + } + mem.slot = slot->slot | (kml->as_id << 16); mem.guest_phys_addr = slot->start_addr; mem.userspace_addr = (unsigned long)slot->ram; mem.flags = slot->flags; + mem.guest_memfd = slot->guest_memfd; + mem.guest_memfd_offset = slot->guest_memfd_offset; if (slot->memory_size && !new && (mem.flags ^ slot->old_flags) & KVM_MEM_READONLY) { /* Set the slot size to 0 before setting the slot to the desired * value. This is needed based on KVM commit 75d61fbc. */ mem.memory_size = 0; - ret = kvm_vm_ioctl(s, KVM_SET_USER_MEMORY_REGION, &mem); + + if (cap_user_memory2) { + ret = kvm_vm_ioctl(s, KVM_SET_USER_MEMORY_REGION2, &mem); + } else { + ret = kvm_vm_ioctl(s, KVM_SET_USER_MEMORY_REGION, &mem); + } if (ret < 0) { goto err; } } mem.memory_size = slot->memory_size; - ret = kvm_vm_ioctl(s, KVM_SET_USER_MEMORY_REGION, &mem); + if (cap_user_memory2) { + ret = kvm_vm_ioctl(s, KVM_SET_USER_MEMORY_REGION2, &mem); + } else { + ret = kvm_vm_ioctl(s, KVM_SET_USER_MEMORY_REGION, &mem); + } slot->old_flags = mem.flags; err: trace_kvm_set_user_memory(mem.slot >> 16, (uint16_t)mem.slot, mem.flags, mem.guest_phys_addr, mem.memory_size, - mem.userspace_addr, ret); + mem.userspace_addr, mem.guest_memfd, + mem.guest_memfd_offset, ret); if (ret < 0) { - error_report("%s: KVM_SET_USER_MEMORY_REGION failed, slot=%d," - " start=0x%" PRIx64 ", size=0x%" PRIx64 ": %s", - __func__, mem.slot, slot->start_addr, - (uint64_t)mem.memory_size, strerror(errno)); + if (cap_user_memory2) { + error_report("%s: KVM_SET_USER_MEMORY_REGION2 failed, slot=%d," + " start=0x%" PRIx64 ", size=0x%" PRIx64 "," + " flags=0x%" PRIx32 ", guest_memfd=%" PRId32 "," + " guest_memfd_offset=0x%" PRIx64 ": %s", + __func__, mem.slot, slot->start_addr, + (uint64_t)mem.memory_size, mem.flags, + mem.guest_memfd, (uint64_t)mem.guest_memfd_offset, + strerror(errno)); + } else { + error_report("%s: KVM_SET_USER_MEMORY_REGION failed, slot=%d," + " start=0x%" PRIx64 ", size=0x%" PRIx64 ": %s", + __func__, mem.slot, slot->start_addr, + (uint64_t)mem.memory_size, strerror(errno)); + } } return ret; } @@ -477,6 +511,9 @@ static int kvm_mem_flags(MemoryRegion *mr) if (readonly && kvm_readonly_mem_allowed) { flags |= KVM_MEM_READONLY; } + if (memory_region_has_guest_memfd(mr)) { + flags |= KVM_MEM_PRIVATE; + } return flags; } @@ -1364,6 +1401,9 @@ static void kvm_set_phys_mem(KVMMemoryListener *kml, mem->ram_start_offset = ram_start_offset; mem->ram = ram; mem->flags = kvm_mem_flags(mr); + mem->guest_memfd = mr->ram_block->guest_memfd; + mem->guest_memfd_offset = (uint8_t*)ram - mr->ram_block->host; + kvm_slot_init_dirty_bitmap(mem); err = kvm_set_user_memory_region(kml, mem, true); if (err) { diff --git a/accel/kvm/trace-events b/accel/kvm/trace-events index 14ebfa1b991c..e6ec2cda6efa 100644 --- a/accel/kvm/trace-events +++ b/accel/kvm/trace-events @@ -15,7 +15,7 @@ kvm_irqchip_update_msi_route(int virq) "Updating MSI route virq=%d" kvm_irqchip_release_virq(int virq) "virq %d" kvm_set_ioeventfd_mmio(int fd, uint64_t addr, uint32_t val, bool assign, uint32_t size, bool datamatch) "fd: %d @0x%" PRIx64 " val=0x%x assign: %d size: %d match: %d" kvm_set_ioeventfd_pio(int fd, uint16_t addr, uint32_t val, bool assign, uint32_t size, bool datamatch) "fd: %d @0x%x val=0x%x assign: %d size: %d match: %d" -kvm_set_user_memory(uint16_t as, uint16_t slot, uint32_t flags, uint64_t guest_phys_addr, uint64_t memory_size, uint64_t userspace_addr, int ret) "AddrSpace#%d Slot#%d flags=0x%x gpa=0x%"PRIx64 " size=0x%"PRIx64 " ua=0x%"PRIx64 " ret=%d" +kvm_set_user_memory(uint16_t as, uint16_t slot, uint32_t flags, uint64_t guest_phys_addr, uint64_t memory_size, uint64_t userspace_addr, uint32_t fd, uint64_t fd_offset, int ret) "AddrSpace#%d Slot#%d flags=0x%x gpa=0x%"PRIx64 " size=0x%"PRIx64 " ua=0x%"PRIx64 " guest_memfd=%d" " guest_memfd_offset=0x%" PRIx64 " ret=%d" kvm_clear_dirty_log(uint32_t slot, uint64_t start, uint32_t size) "slot#%"PRId32" start 0x%"PRIx64" size 0x%"PRIx32 kvm_resample_fd_notify(int gsi) "gsi %d" kvm_dirty_ring_full(int id) "vcpu %d" diff --git a/include/sysemu/kvm_int.h b/include/sysemu/kvm_int.h index fd846394be10..58b7aa3fc786 100644 --- a/include/sysemu/kvm_int.h +++ b/include/sysemu/kvm_int.h @@ -30,6 +30,8 @@ typedef struct KVMSlot int as_id; /* Cache of the offset in ram address space */ ram_addr_t ram_start_offset; + int guest_memfd; + hwaddr guest_memfd_offset; } KVMSlot; typedef struct KVMMemoryUpdate {