new file mode 100644
@@ -0,0 +1,281 @@
+/*
+ * PCM-26D2CA PCIe CAN device (SJA1000 based) emulation
+ *
+ * Advantech iDoor Module: 2-Ports Isolated CANBus mPCIe, DB9
+ *
+ * Copyright (c) 2023 Deniz Eren (deniz.eren@icloud.com)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/units.h"
+#include "qemu/osdep.h"
+#include "qemu/event_notifier.h"
+#include "qemu/module.h"
+#include "qemu/thread.h"
+#include "qemu/sockets.h"
+#include "qapi/error.h"
+#include "chardev/char.h"
+#include "hw/irq.h"
+#include "hw/pci/pci_device.h"
+#include "hw/qdev-properties.h"
+#include "hw/pci/msi.h"
+#include "migration/vmstate.h"
+#include "net/can_emu.h"
+
+#include "can_sja1000.h"
+#include "qom/object.h"
+
+#define TYPE_CAN_PCI_DEV "pcm26d2ca_pci"
+
+typedef struct Pcm26D2CAPCIeState Pcm26D2CAPCIeState;
+DECLARE_INSTANCE_CHECKER(Pcm26D2CAPCIeState, PCM26D2CA_PCI_DEV,
+ TYPE_CAN_PCI_DEV)
+
+/* the PCI device and vendor IDs */
+#ifndef PCM26D2CA_PCI_VENDOR_ID1
+#define PCM26D2CA_PCI_VENDOR_ID1 0x13fe
+#endif
+
+#ifndef PCM26D2CA_PCI_DEVICE_ID1
+#define PCM26D2CA_PCI_DEVICE_ID1 0x00d7
+#endif
+
+#define PCM26D2CA_PCI_SJA_COUNT 2
+#define PCM26D2CA_PCI_SJA_RANGE 0x400
+
+#define PCM26D2CA_PCI_BYTES_PER_SJA 0x80
+
+#define PCM26D2CA_IO_IDX 0
+
+#define PCM26D2CA_MSI_VEC_NUM (8)
+#define PCM26D2CA_MSI_RI_ENTRY (0) /* Receive interrupt */
+#define PCM26D2CA_MSI_TI_ENTRY (1) /* Transmit interrupt */
+#define PCM26D2CA_MSI_EI_ENTRY (2) /* Error warning interrupt */
+#define PCM26D2CA_MSI_DOI_ENTRY (3) /* Data overrun interrupt */
+#define PCM26D2CA_MSI_WUI_ENTRY (4) /* Wakeup interrupt */
+#define PCM26D2CA_MSI_EPI_ENTRY (5) /* Error passive */
+#define PCM26D2CA_MSI_ALI_ENTRY (6) /* Arbitration lost */
+#define PCM26D2CA_MSI_BEI_ENTRY (7) /* Bus error interrupt */
+
+struct Pcm26D2CAPCIeState {
+ /*< private >*/
+ PCIDevice dev;
+ /*< public >*/
+ MemoryRegion io;
+
+ CanSJA1000State sja_state[PCM26D2CA_PCI_SJA_COUNT];
+ qemu_irq irq;
+
+ char *model; /* The model that support, only SJA1000 now. */
+ CanBusState *canbus[PCM26D2CA_PCI_SJA_COUNT];
+};
+
+static void pcm26d2ca_pci_reset(DeviceState *dev)
+{
+ Pcm26D2CAPCIeState *d = PCM26D2CA_PCI_DEV(dev);
+ int i;
+
+ for (i = 0 ; i < PCM26D2CA_PCI_SJA_COUNT; i++) {
+ can_sja_hardware_reset(&d->sja_state[i]);
+ }
+}
+
+static uint64_t pcm26d2ca_pci_io_read(void *opaque, hwaddr addr, unsigned size)
+{
+ Pcm26D2CAPCIeState *d = opaque;
+ CanSJA1000State *s = &d->sja_state[0];
+ hwaddr _addr = addr;
+
+ if (addr >= PCM26D2CA_PCI_SJA_RANGE) {
+ s = &d->sja_state[1];
+ _addr -= PCM26D2CA_PCI_SJA_RANGE;
+ }
+
+ if (_addr >= PCM26D2CA_PCI_BYTES_PER_SJA) {
+ return 0;
+ }
+
+ return can_sja_mem_read(s, _addr >> 2, size);
+}
+
+static void pcm26d2ca_pci_io_write(void *opaque, hwaddr addr, uint64_t data,
+ unsigned size)
+{
+ Pcm26D2CAPCIeState *d = opaque;
+ CanSJA1000State *s = &d->sja_state[0];
+ hwaddr _addr = addr;
+
+ if (addr >= PCM26D2CA_PCI_SJA_RANGE) {
+ s = &d->sja_state[1];
+ _addr -= PCM26D2CA_PCI_SJA_RANGE;
+ }
+
+ if (_addr >= PCM26D2CA_PCI_BYTES_PER_SJA) {
+ return;
+ }
+
+ can_sja_mem_write(s, _addr >> 2, data, size);
+}
+
+static const MemoryRegionOps pcm26d2ca_pci_io_ops = {
+ .read = pcm26d2ca_pci_io_read,
+ .write = pcm26d2ca_pci_io_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .impl = {
+ .max_access_size = 1,
+ },
+};
+
+static void pcm26d2ca_pci_realize(PCIDevice *pci_dev, Error **errp)
+{
+ static const uint16_t pcie_offset = 0x0E0;
+ Pcm26D2CAPCIeState *d = PCM26D2CA_PCI_DEV(pci_dev);
+ uint8_t *pci_conf;
+ Error *err = NULL;
+ int i;
+ int ret;
+
+ /* Map MSI and MSI-X vector entries one-to-one for each interrupt */
+ uint8_t msi_map[PCM26D2CA_MSI_VEC_NUM] = {
+ PCM26D2CA_MSI_RI_ENTRY, /* Receive interrupt */
+ PCM26D2CA_MSI_TI_ENTRY, /* Transmit interrupt */
+ PCM26D2CA_MSI_EI_ENTRY, /* Error warning interrupt */
+ PCM26D2CA_MSI_DOI_ENTRY, /* Data overrun interrupt */
+ PCM26D2CA_MSI_WUI_ENTRY, /* Wakeup interrupt */
+ PCM26D2CA_MSI_EPI_ENTRY, /* Error passive */
+ PCM26D2CA_MSI_ALI_ENTRY, /* Arbitration lost */
+ PCM26D2CA_MSI_BEI_ENTRY /* Bus error interrupt */
+ };
+
+ pci_conf = pci_dev->config;
+ pci_conf[PCI_INTERRUPT_PIN] = 0x01; /* interrupt pin A */
+
+ d->irq = pci_allocate_irq(&d->dev);
+
+ for (i = 0 ; i < PCM26D2CA_PCI_SJA_COUNT; i++) {
+ can_sja_cap_init(&d->sja_state[i], d->irq, pci_dev, msi_map, msi_map);
+ }
+
+ for (i = 0 ; i < PCM26D2CA_PCI_SJA_COUNT; i++) {
+ if (can_sja_connect_to_bus(&d->sja_state[i], d->canbus[i]) < 0) {
+ error_setg(errp, "can_sja_connect_to_bus failed");
+ return;
+ }
+ }
+
+ memory_region_init_io(&d->io, OBJECT(d), &pcm26d2ca_pci_io_ops,
+ d, "pcm26d2ca_pci-io", 2*PCM26D2CA_PCI_SJA_RANGE);
+ pci_register_bar(&d->dev, PCM26D2CA_IO_IDX,
+ PCI_BASE_ADDRESS_SPACE_MEMORY, &d->io);
+
+ if (pcie_endpoint_cap_v1_init(pci_dev, pcie_offset) < 0) {
+ error_setg(errp, "Failed to initialize PCIe capability");
+ return;
+ }
+
+ ret = msi_init( PCI_DEVICE(d), 0xD0, PCM26D2CA_MSI_VEC_NUM,
+ true, false, NULL );
+
+ if (ret) {
+ error_setg(errp, "msi_init failed (%d)", ret);
+ return;
+ }
+
+ error_free(err);
+}
+
+static void pcm26d2ca_pci_exit(PCIDevice *pci_dev)
+{
+ Pcm26D2CAPCIeState *d = PCM26D2CA_PCI_DEV(pci_dev);
+ int i;
+
+ for (i = 0 ; i < PCM26D2CA_PCI_SJA_COUNT; i++) {
+ can_sja_disconnect(&d->sja_state[i]);
+ }
+
+ qemu_free_irq(d->irq);
+ msi_uninit(pci_dev);
+}
+
+static const VMStateDescription vmstate_pcm26d2ca_pci = {
+ .name = TYPE_CAN_PCI_DEV,
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_PCI_DEVICE(dev, Pcm26D2CAPCIeState),
+ VMSTATE_STRUCT(sja_state[0], Pcm26D2CAPCIeState, 0, vmstate_can_sja,
+ CanSJA1000State),
+ VMSTATE_STRUCT(sja_state[1], Pcm26D2CAPCIeState, 0, vmstate_can_sja,
+ CanSJA1000State),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static void pcm26d2ca_pci_instance_init(Object *obj)
+{
+ Pcm26D2CAPCIeState *d = PCM26D2CA_PCI_DEV(obj);
+
+ object_property_add_link(obj, "canbus0", TYPE_CAN_BUS,
+ (Object **)&d->canbus[0],
+ qdev_prop_allow_set_link_before_realize,
+ 0);
+ object_property_add_link(obj, "canbus1", TYPE_CAN_BUS,
+ (Object **)&d->canbus[1],
+ qdev_prop_allow_set_link_before_realize,
+ 0);
+}
+
+static void pcm26d2ca_pci_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+ k->realize = pcm26d2ca_pci_realize;
+ k->exit = pcm26d2ca_pci_exit;
+ k->vendor_id = PCM26D2CA_PCI_VENDOR_ID1;
+ k->device_id = PCM26D2CA_PCI_DEVICE_ID1;
+ k->revision = 0x00;
+ k->class_id = 0x000c09;
+ k->subsystem_vendor_id = PCM26D2CA_PCI_VENDOR_ID1;
+ k->subsystem_id = PCM26D2CA_PCI_DEVICE_ID1;
+ dc->desc = "PCM-26 series Advantech iDoor";
+ dc->vmsd = &vmstate_pcm26d2ca_pci;
+ set_bit(DEVICE_CATEGORY_MISC, dc->categories);
+ dc->reset = pcm26d2ca_pci_reset;
+}
+
+static const TypeInfo pcm26d2ca_pci_info = {
+ .name = TYPE_CAN_PCI_DEV,
+ .parent = TYPE_PCI_DEVICE,
+ .instance_size = sizeof(Pcm26D2CAPCIeState),
+ .class_init = pcm26d2ca_pci_class_init,
+ .instance_init = pcm26d2ca_pci_instance_init,
+ .interfaces = (InterfaceInfo[]) {
+ { INTERFACE_PCIE_DEVICE },
+ { }
+ },
+};
+
+static void pcm26d2ca_pci_register_types(void)
+{
+ type_register_static(&pcm26d2ca_pci_info);
+}
+
+type_init(pcm26d2ca_pci_register_types)
@@ -29,6 +29,8 @@
#include "qemu/log.h"
#include "chardev/char.h"
#include "hw/irq.h"
+#include "hw/pci/msi.h"
+#include "hw/pci/msix.h"
#include "migration/vmstate.h"
#include "net/can_emu.h"
@@ -401,10 +403,58 @@ static int frame2buff_bas(const qemu_can_frame *frame, uint8_t *buff)
return dlen + 2;
}
+static void can_sja_update_pcie_msi(CanSJA1000State *s, uint8_t interrupt_reg)
+{
+ int i;
+
+ if (s->pci_dev == NULL) {
+ return;
+ }
+
+ if (!msi_enabled(s->pci_dev)) {
+ return;
+ }
+
+ /* Trigger MSI vectors associated to interrupts */
+ for (i = 0; i < NUM_MSI_IRQ; ++i) {
+ if (interrupt_reg & (1 << i)) {
+ msi_notify(s->pci_dev, s->msi_map[i]);
+ }
+ }
+}
+
+static void can_sja_update_pcie_msix(CanSJA1000State *s, uint8_t interrupt_reg)
+{
+ int i;
+
+ if (s->pci_dev == NULL) {
+ return;
+ }
+
+ if (!msix_enabled(s->pci_dev)) {
+ return;
+ }
+
+ /* Trigger MSI-X vectors associated to interrupts */
+ for (i = 0; i < NUM_MSIX_IRQ; ++i) {
+ if (interrupt_reg & (1 << i)) {
+ msix_notify(s->pci_dev, s->msix_map[i]);
+ }
+ }
+}
+
static void can_sja_update_pel_irq(CanSJA1000State *s)
{
if (s->interrupt_en & s->interrupt_pel) {
qemu_irq_raise(s->irq);
+
+ if (s->pci_dev && msi_enabled(s->pci_dev)) {
+ can_sja_update_pcie_msi(s, s->interrupt_pel);
+ }
+
+ if (s->pci_dev && msix_enabled(s->pci_dev)) {
+ can_sja_update_pcie_msix(s, s->interrupt_pel);
+ }
} else {
qemu_irq_lower(s->irq);
}
@@ -414,6 +464,14 @@ static void can_sja_update_bas_irq(CanSJA1000State *s)
{
if ((s->control >> 1) & s->interrupt_bas) {
qemu_irq_raise(s->irq);
+
+ if (msi_enabled(s->pci_dev)) {
+ can_sja_update_pcie_msi(s, s->interrupt_pel);
+ }
+
+ if (msix_enabled(s->pci_dev)) {
+ can_sja_update_pcie_msix(s, s->interrupt_pel);
+ }
} else {
qemu_irq_lower(s->irq);
}
@@ -916,8 +974,18 @@ void can_sja_disconnect(CanSJA1000State *s)
int can_sja_init(CanSJA1000State *s, qemu_irq irq)
{
+ int i;
s->irq = irq;
+ s->pci_dev = NULL;
+ for (i = 0; i < NUM_MSI_IRQ; i++) {
+ s->msi_map[i] = 0;
+ }
+
+ for (i = 0; i < NUM_MSIX_IRQ; i++) {
+ s->msix_map[i] = 0;
+ }
+
qemu_irq_lower(s->irq);
can_sja_hardware_reset(s);
@@ -925,6 +993,29 @@ int can_sja_init(CanSJA1000State *s, qemu_irq irq)
return 0;
}
+int can_sja_cap_init(CanSJA1000State *s, qemu_irq irq, PCIDevice *pci_dev,
+ uint8_t *msi_map, uint8_t *msix_map)
+{
+ int i;
+ can_sja_init(s, irq); /* Perform base init */
+
+ s->pci_dev = pci_dev;
+
+ if (msi_map) {
+ for (i = 0; i < NUM_MSI_IRQ; i++) {
+ s->msi_map[i] = msi_map[i];
+ }
+ }
+
+ if (msix_map) {
+ for (i = 0; i < NUM_MSIX_IRQ; i++) {
+ s->msix_map[i] = msix_map[i];
+ }
+ }
+
+ return 0;
+}
+
const VMStateDescription vmstate_qemu_can_filter = {
.name = "qemu_can_filter",
.version_id = 1,
@@ -37,6 +37,10 @@
/* The receive buffer size. */
#define SJA_RCV_BUF_LEN 64
+/* Number of MSI/MSI-X interrupt vectors */
+#define NUM_MSI_IRQ 8
+#define NUM_MSIX_IRQ NUM_MSI_IRQ
+
typedef struct CanSJA1000State {
/* PeliCAN state and registers sorted by address */
uint8_t mode; /* 0 .. Mode register, DS-p26 */
@@ -68,6 +72,11 @@ typedef struct CanSJA1000State {
qemu_irq irq;
CanBusClientState bus_client;
+
+ /* PCIe MSI */
+ PCIDevice *pci_dev;
+ uint8_t msi_map[NUM_MSI_IRQ]; /* MSI map entry to interrupt */
+ uint8_t msix_map[NUM_MSIX_IRQ]; /* MSI-X map entry to interrupt */
} CanSJA1000State;
/* PeliCAN mode */
@@ -137,6 +146,9 @@ void can_sja_disconnect(CanSJA1000State *s);
int can_sja_init(CanSJA1000State *s, qemu_irq irq);
+int can_sja_cap_init(CanSJA1000State *s, qemu_irq irq, PCIDevice *pci_dev,
+ uint8_t *msi_map, uint8_t *msix_map);
+
bool can_sja_can_receive(CanBusClientState *client);
ssize_t can_sja_receive(CanBusClientState *client,
@@ -2,6 +2,7 @@ system_ss.add(when: 'CONFIG_CAN_SJA1000', if_true: files('can_sja1000.c'))
system_ss.add(when: 'CONFIG_CAN_PCI', if_true: files('can_kvaser_pci.c'))
system_ss.add(when: 'CONFIG_CAN_PCI', if_true: files('can_pcm3680_pci.c'))
system_ss.add(when: 'CONFIG_CAN_PCI', if_true: files('can_mioe3680_pci.c'))
+system_ss.add(when: 'CONFIG_CAN_PCI', if_true: files('can_pcm26d2ca_pci.c'))
system_ss.add(when: 'CONFIG_CAN_CTUCANFD', if_true: files('ctucan_core.c'))
system_ss.add(when: 'CONFIG_CAN_CTUCANFD_PCI', if_true: files('ctucan_pci.c'))
system_ss.add(when: 'CONFIG_XLNX_ZYNQMP', if_true: files('xlnx-zynqmp-can.c'))
Signed-off-by: Deniz Eren <deniz.eren@outlook.com> --- hw/net/can/can_pcm26d2ca_pci.c | 281 +++++++++++++++++++++++++++++++++ hw/net/can/can_sja1000.c | 91 +++++++++++ hw/net/can/can_sja1000.h | 12 ++ hw/net/can/meson.build | 1 + 4 files changed, 385 insertions(+) create mode 100644 hw/net/can/can_pcm26d2ca_pci.c