diff mbox series

[PULL,26/60] ppc/pnv: Return zero for core thread state xscom

Message ID 20230707113108.7145-27-danielhb413@gmail.com
State New
Headers show
Series [PULL,01/60] pnv/psi: Allow access to PSI registers through xscom | expand

Commit Message

Daniel Henrique Barboza July 7, 2023, 11:30 a.m. UTC 
From: Joel Stanley <joel@jms.id.au>

Firmware now warns if booting in LPAR per core mode (PPC bit 62). So
this warning doesn't trigger, report the core thread state is 0.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-ID: <20230704054204.168547-6-joel@jms.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
---
 hw/ppc/pnv_core.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/hw/ppc/pnv_core.c b/hw/ppc/pnv_core.c
index 1eec28c88c..b7223bb445 100644
--- a/hw/ppc/pnv_core.c
+++ b/hw/ppc/pnv_core.c
@@ -116,6 +116,8 @@  static const MemoryRegionOps pnv_core_power8_xscom_ops = {
 #define PNV9_XSCOM_EC_PPM_SPECIAL_WKUP_HYP 0xf010d
 #define PNV9_XSCOM_EC_PPM_SPECIAL_WKUP_OTR 0xf010a
 
+#define PNV9_XSCOM_EC_CORE_THREAD_STATE    0x10ab3
+
 static uint64_t pnv_core_power9_xscom_read(void *opaque, hwaddr addr,
                                            unsigned int width)
 {
@@ -134,6 +136,9 @@  static uint64_t pnv_core_power9_xscom_read(void *opaque, hwaddr addr,
     case PNV9_XSCOM_EC_PPM_SPECIAL_WKUP_OTR:
         val = 0x0;
         break;
+    case PNV9_XSCOM_EC_CORE_THREAD_STATE:
+        val = 0;
+        break;
     default:
         qemu_log_mask(LOG_UNIMP, "Warning: reading reg=0x%" HWADDR_PRIx "\n",
                   addr);
@@ -171,6 +176,8 @@  static const MemoryRegionOps pnv_core_power9_xscom_ops = {
  * POWER10 core controls
  */
 
+#define PNV10_XSCOM_EC_CORE_THREAD_STATE    0x412
+
 static uint64_t pnv_core_power10_xscom_read(void *opaque, hwaddr addr,
                                            unsigned int width)
 {
@@ -178,6 +185,9 @@  static uint64_t pnv_core_power10_xscom_read(void *opaque, hwaddr addr,
     uint64_t val = 0;
 
     switch (offset) {
+    case PNV10_XSCOM_EC_CORE_THREAD_STATE:
+        val = 0;
+        break;
     default:
         qemu_log_mask(LOG_UNIMP, "Warning: reading reg=0x%" HWADDR_PRIx "\n",
                   addr);