diff mbox series

[21/21] mac_via: extend timer calibration hack to work with A/UX

Message ID 20230702154838.722809-22-mark.cave-ayland@ilande.co.uk
State New
Headers show
Series q800: add support for booting MacOS Classic - part 2 | expand

Commit Message

Mark Cave-Ayland July 2, 2023, 3:48 p.m. UTC
The A/UX timer calibration loop runs continuously until 2 consecutive iterations
differ by at least 0x492 timer ticks. Modern hosts execute the timer calibration
loop so fast that this situation never occurs causing a hang on boot.

Use a similar method to Shoebill which is to randomly add 0x500 to the T2
counter value during calibration to enable it to eventually succeed.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
 hw/misc/mac_via.c | 41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)
diff mbox series

Patch

diff --git a/hw/misc/mac_via.c b/hw/misc/mac_via.c
index 94b4f5cebc..ea9d8b3aa9 100644
--- a/hw/misc/mac_via.c
+++ b/hw/misc/mac_via.c
@@ -983,6 +983,30 @@  static void via1_timer_calibration_hack(MOS6522Q800VIA1State *v1s, int addr,
             /* Looks like there has been a reset? */
             v1s->timer_hack_state = 1;
         }
+
+        if (addr == VIA_REG_T2CL && val == 0xf03c && size == 2) {
+            /* VIA_REG_T2CH: high byte of counter (A/UX) */
+            v1s->timer_hack_state = 5;
+        }
+        break;
+    case 5:
+        if ((addr == VIA_REG_IER && val == 0x20) || addr == VIA_REG_T2CH) {
+            /* End of A/UX timer calibration routine, or another write */
+            v1s->timer_hack_state = 6;
+        } else {
+            v1s->timer_hack_state = 0;
+        }
+        break;
+    case 6:
+        /*
+         * This is the normal post-calibration timer state once both the
+         * MacOS toolbox and A/UX have been calibrated, until we see a write
+         * to VIA_REG_PCR to suggest a reset
+         */
+        if (addr == VIA_REG_PCR && val == 0x22) {
+            /* Looks like there has been a reset? */
+            v1s->timer_hack_state = 1;
+        }
         break;
     default:
         g_assert_not_reached();
@@ -1013,6 +1037,23 @@  static uint64_t mos6522_q800_via1_read(void *opaque, hwaddr addr, unsigned size)
             /* Quadra 800 Id */
             ret = (ret & ~VIA1A_CPUID_MASK) | VIA1A_CPUID_Q800;
             break;
+        case VIA_REG_T2CH:
+            if (v1s->timer_hack_state == 5) {
+                /*
+                 * The A/UX timer calibration loop runs continuously until 2
+                 * consecutive iterations differ by at least 0x492 timer ticks.
+                 * Modern hosts execute the timer calibration loop so fast that
+                 * this situation never occurs causing a hang on boot. Use a
+                 * similar method to Shoebill which is to randomly add 0x500 to
+                 * the T2 counter value during calibration to enable it to
+                 * eventually succeed.
+                 */
+                now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+                if (now & 1) {
+                    ret += 0x5;
+                }
+            }
+            break;
         }
         val |= ret << ((size - i - 1) << 3);
     }