| Message ID | 20221221122213.1458540-1-linux@roeck-us.net |
|---|---|
| State | New |
| Headers | show |
| Series | m25p80: Add the is25wp256 SFPD table | expand |
On 12/21/22 13:22, Guenter Roeck wrote: > Generated from hardware using the following command and then padding > with 0xff to fill out a power-of-2: > xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp > > Cc: Michael Walle <michael@walle.cc> > Cc: Tudor Ambarus <tudor.ambarus@linaro.org> > Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Cédric Le Goater <clg@kaod.org> Thanks, C. > --- > hw/block/m25p80.c | 3 ++- > hw/block/m25p80_sfdp.c | 40 ++++++++++++++++++++++++++++++++++++++++ > hw/block/m25p80_sfdp.h | 2 ++ > 3 files changed, 44 insertions(+), 1 deletion(-) > > diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c > index 02adc87527..802d2eb021 100644 > --- a/hw/block/m25p80.c > +++ b/hw/block/m25p80.c > @@ -221,7 +221,8 @@ static const FlashPartInfo known_devices[] = { > { INFO("is25wp032", 0x9d7016, 0, 64 << 10, 64, ER_4K) }, > { INFO("is25wp064", 0x9d7017, 0, 64 << 10, 128, ER_4K) }, > { INFO("is25wp128", 0x9d7018, 0, 64 << 10, 256, ER_4K) }, > - { INFO("is25wp256", 0x9d7019, 0, 64 << 10, 512, ER_4K) }, > + { INFO("is25wp256", 0x9d7019, 0, 64 << 10, 512, ER_4K), > + .sfdp_read = m25p80_sfdp_is25wp256 }, > > /* Macronix */ > { INFO("mx25l2005a", 0xc22012, 0, 64 << 10, 4, ER_4K) }, > diff --git a/hw/block/m25p80_sfdp.c b/hw/block/m25p80_sfdp.c > index 77615fa29e..b33811a4f5 100644 > --- a/hw/block/m25p80_sfdp.c > +++ b/hw/block/m25p80_sfdp.c > @@ -330,3 +330,43 @@ static const uint8_t sfdp_w25q01jvq[] = { > 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, > }; > define_sfdp_read(w25q01jvq); > + > +/* > + * Integrated Silicon Solution (ISSI) > + */ > + > +static const uint8_t sfdp_is25wp256[] = { > + 0x53, 0x46, 0x44, 0x50, 0x06, 0x01, 0x01, 0xff, > + 0x00, 0x06, 0x01, 0x10, 0x30, 0x00, 0x00, 0xff, > + 0x9d, 0x05, 0x01, 0x03, 0x80, 0x00, 0x00, 0x02, > + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, > + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, > + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, > + 0xe5, 0x20, 0xf9, 0xff, 0xff, 0xff, 0xff, 0x0f, > + 0x44, 0xeb, 0x08, 0x6b, 0x08, 0x3b, 0x80, 0xbb, > + 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0xff, > + 0xff, 0xff, 0x44, 0xeb, 0x0c, 0x20, 0x0f, 0x52, > + 0x10, 0xd8, 0x00, 0xff, 0x23, 0x4a, 0xc9, 0x00, > + 0x82, 0xd8, 0x11, 0xce, 0xcc, 0xcd, 0x68, 0x46, > + 0x7a, 0x75, 0x7a, 0x75, 0xf7, 0xae, 0xd5, 0x5c, > + 0x4a, 0x42, 0x2c, 0xff, 0xf0, 0x30, 0xfa, 0xa9, > + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, > + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, > + 0x50, 0x19, 0x50, 0x16, 0x9f, 0xf9, 0xc0, 0x64, > + 0x8f, 0xef, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, > + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, > + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, > + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, > + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, > + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, > + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, > + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, > + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, > + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, > + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, > + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, > + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, > + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, > + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, > +}; > +define_sfdp_read(is25wp256); > diff --git a/hw/block/m25p80_sfdp.h b/hw/block/m25p80_sfdp.h > index df7adfb5ce..011a880f66 100644 > --- a/hw/block/m25p80_sfdp.h > +++ b/hw/block/m25p80_sfdp.h > @@ -26,4 +26,6 @@ uint8_t m25p80_sfdp_w25q512jv(uint32_t addr); > > uint8_t m25p80_sfdp_w25q01jvq(uint32_t addr); > > +uint8_t m25p80_sfdp_is25wp256(uint32_t addr); > + > #endif
On Wed, Dec 21, 2022 at 06:36:02PM +0100, Cédric Le Goater wrote: > On 12/21/22 13:22, Guenter Roeck wrote: > > Generated from hardware using the following command and then padding > > with 0xff to fill out a power-of-2: > > xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp > > > > Cc: Michael Walle <michael@walle.cc> > > Cc: Tudor Ambarus <tudor.ambarus@linaro.org> > > Signed-off-by: Guenter Roeck <linux@roeck-us.net> > > Reviewed-by: Cédric Le Goater <clg@kaod.org> If SFDP is a standard, couldn't we have an function to generate it from the flash parameters?
On 25.12.2022 14:18, Ben Dooks wrote: > On Wed, Dec 21, 2022 at 06:36:02PM +0100, Cédric Le Goater wrote: >> On 12/21/22 13:22, Guenter Roeck wrote: >>> Generated from hardware using the following command and then padding >>> with 0xff to fill out a power-of-2: >>> xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp >>> >>> Cc: Michael Walle <michael@walle.cc> >>> Cc: Tudor Ambarus <tudor.ambarus@linaro.org> >>> Signed-off-by: Guenter Roeck <linux@roeck-us.net> >> >> Reviewed-by: Cédric Le Goater <clg@kaod.org> > > If SFDP is a standard, couldn't we have an function to generate it from > the flash parameters? > No, it's not practical as you have to specify all the flash parameters at flash declaration.
On 12/27/22 07:31, Tudor Ambarus wrote: > > > On 25.12.2022 14:18, Ben Dooks wrote: >> On Wed, Dec 21, 2022 at 06:36:02PM +0100, Cédric Le Goater wrote: >>> On 12/21/22 13:22, Guenter Roeck wrote: >>>> Generated from hardware using the following command and then padding >>>> with 0xff to fill out a power-of-2: >>>> xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp >>>> >>>> Cc: Michael Walle <michael@walle.cc> >>>> Cc: Tudor Ambarus <tudor.ambarus@linaro.org> >>>> Signed-off-by: Guenter Roeck <linux@roeck-us.net> >>> >>> Reviewed-by: Cédric Le Goater <clg@kaod.org> >> >> If SFDP is a standard, couldn't we have an function to generate it from >> the flash parameters? >> > > No, it's not practical as you have to specify all the flash parameters > at flash declaration. Indeed and the definition of flash models in QEMU is far to cover all the SFDP features. The known_devices array of m25p80 would be huge ! However, we could generate some of the SFDP tables if no raw data is provided. It could be useful for testing drivers. Thanks, C.
Am 2023-01-02 14:53, schrieb Cédric Le Goater: > On 12/27/22 07:31, Tudor Ambarus wrote: >> >> >> On 25.12.2022 14:18, Ben Dooks wrote: >>> On Wed, Dec 21, 2022 at 06:36:02PM +0100, Cédric Le Goater wrote: >>>> On 12/21/22 13:22, Guenter Roeck wrote: >>>>> Generated from hardware using the following command and then >>>>> padding >>>>> with 0xff to fill out a power-of-2: >>>>> xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp >>>>> >>>>> Cc: Michael Walle <michael@walle.cc> >>>>> Cc: Tudor Ambarus <tudor.ambarus@linaro.org> >>>>> Signed-off-by: Guenter Roeck <linux@roeck-us.net> >>>> >>>> Reviewed-by: Cédric Le Goater <clg@kaod.org> >>> >>> If SFDP is a standard, couldn't we have an function to generate it >>> from >>> the flash parameters? >>> >> >> No, it's not practical as you have to specify all the flash parameters >> at flash declaration. > > Indeed and the definition of flash models in QEMU is far to cover all > the SFDP > features. The known_devices array of m25p80 would be huge ! However, we > could > generate some of the SFDP tables if no raw data is provided. It could > be useful > for testing drivers. I don't think adding (incomplete) SFDP tables makes sense for any real devices. E.g. sometimes our linux driver will look at specific bits in SFDP to figure out what particular flash device is attached. For example when there are different flashes with the same jedec id. But since the last released kernel, we support a generic SFDP driver, which is used when there is no matching driver for the flash's jedec id. Theoretically, you can build your own flash device (with a unique id) and generate the sfdp tables for that one. -michael
On Mon, Jan 02, 2023 at 04:43:49PM +0100, Michael Walle wrote: > Am 2023-01-02 14:53, schrieb Cédric Le Goater: > > On 12/27/22 07:31, Tudor Ambarus wrote: > > > > > > > > > On 25.12.2022 14:18, Ben Dooks wrote: > > > > On Wed, Dec 21, 2022 at 06:36:02PM +0100, Cédric Le Goater wrote: > > > > > On 12/21/22 13:22, Guenter Roeck wrote: > > > > > > Generated from hardware using the following command and > > > > > > then padding > > > > > > with 0xff to fill out a power-of-2: > > > > > > xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp > > > > > > > > > > > > Cc: Michael Walle <michael@walle.cc> > > > > > > Cc: Tudor Ambarus <tudor.ambarus@linaro.org> > > > > > > Signed-off-by: Guenter Roeck <linux@roeck-us.net> > > > > > > > > > > Reviewed-by: Cédric Le Goater <clg@kaod.org> > > > > > > > > If SFDP is a standard, couldn't we have an function to generate > > > > it from > > > > the flash parameters? > > > > > > > > > > No, it's not practical as you have to specify all the flash parameters > > > at flash declaration. > > > > Indeed and the definition of flash models in QEMU is far to cover all > > the SFDP > > features. The known_devices array of m25p80 would be huge ! However, we > > could > > generate some of the SFDP tables if no raw data is provided. It could be > > useful > > for testing drivers. > > I don't think adding (incomplete) SFDP tables makes sense for any real > devices. E.g. sometimes our linux driver will look at specific bits in > SFDP to figure out what particular flash device is attached. For example > when there are different flashes with the same jedec id. > > But since the last released kernel, we support a generic SFDP driver, which > is used when there is no matching driver for the flash's jedec id. > Theoretically, you can build your own flash device (with a unique id) and > generate the sfdp tables for that one. > How about older kernels versions ? Would those still support such (virtual ?) flash devices ? Thanks, Guenter
Am 2023-01-02 17:23, schrieb Guenter Roeck: > On Mon, Jan 02, 2023 at 04:43:49PM +0100, Michael Walle wrote: >> Am 2023-01-02 14:53, schrieb Cédric Le Goater: >> > On 12/27/22 07:31, Tudor Ambarus wrote: >> > > >> > > >> > > On 25.12.2022 14:18, Ben Dooks wrote: >> > > > On Wed, Dec 21, 2022 at 06:36:02PM +0100, Cédric Le Goater wrote: >> > > > > On 12/21/22 13:22, Guenter Roeck wrote: >> > > > > > Generated from hardware using the following command and >> > > > > > then padding >> > > > > > with 0xff to fill out a power-of-2: >> > > > > > xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp >> > > > > > >> > > > > > Cc: Michael Walle <michael@walle.cc> >> > > > > > Cc: Tudor Ambarus <tudor.ambarus@linaro.org> >> > > > > > Signed-off-by: Guenter Roeck <linux@roeck-us.net> >> > > > > >> > > > > Reviewed-by: Cédric Le Goater <clg@kaod.org> >> > > > >> > > > If SFDP is a standard, couldn't we have an function to generate >> > > > it from >> > > > the flash parameters? >> > > > >> > > >> > > No, it's not practical as you have to specify all the flash parameters >> > > at flash declaration. >> > >> > Indeed and the definition of flash models in QEMU is far to cover all >> > the SFDP >> > features. The known_devices array of m25p80 would be huge ! However, we >> > could >> > generate some of the SFDP tables if no raw data is provided. It could be >> > useful >> > for testing drivers. >> >> I don't think adding (incomplete) SFDP tables makes sense for any real >> devices. E.g. sometimes our linux driver will look at specific bits in >> SFDP to figure out what particular flash device is attached. For >> example >> when there are different flashes with the same jedec id. >> >> But since the last released kernel, we support a generic SFDP driver, >> which >> is used when there is no matching driver for the flash's jedec id. >> Theoretically, you can build your own flash device (with a unique id) >> and >> generate the sfdp tables for that one. >> > How about older kernels versions ? Would those still support such > (virtual ?) > flash devices ? No with older kernels you'd be out of luck. They will just print "unknown flash id" and skip the device. -michael
On Mon, Jan 02, 2023 at 06:42:03PM +0100, Michael Walle wrote: > Am 2023-01-02 17:23, schrieb Guenter Roeck: > > On Mon, Jan 02, 2023 at 04:43:49PM +0100, Michael Walle wrote: > > > Am 2023-01-02 14:53, schrieb Cédric Le Goater: > > > > On 12/27/22 07:31, Tudor Ambarus wrote: > > > > > > > > > > > > > > > On 25.12.2022 14:18, Ben Dooks wrote: > > > > > > On Wed, Dec 21, 2022 at 06:36:02PM +0100, Cédric Le Goater wrote: > > > > > > > On 12/21/22 13:22, Guenter Roeck wrote: > > > > > > > > Generated from hardware using the following command and > > > > > > > > then padding > > > > > > > > with 0xff to fill out a power-of-2: > > > > > > > > xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp > > > > > > > > > > > > > > > > Cc: Michael Walle <michael@walle.cc> > > > > > > > > Cc: Tudor Ambarus <tudor.ambarus@linaro.org> > > > > > > > > Signed-off-by: Guenter Roeck <linux@roeck-us.net> > > > > > > > > > > > > > > Reviewed-by: Cédric Le Goater <clg@kaod.org> > > > > > > > > > > > > If SFDP is a standard, couldn't we have an function to generate > > > > > > it from > > > > > > the flash parameters? > > > > > > > > > > > > > > > > No, it's not practical as you have to specify all the flash parameters > > > > > at flash declaration. > > > > > > > > Indeed and the definition of flash models in QEMU is far to cover all > > > > the SFDP > > > > features. The known_devices array of m25p80 would be huge ! However, we > > > > could > > > > generate some of the SFDP tables if no raw data is provided. It could be > > > > useful > > > > for testing drivers. > > > > > > I don't think adding (incomplete) SFDP tables makes sense for any real > > > devices. E.g. sometimes our linux driver will look at specific bits in > > > SFDP to figure out what particular flash device is attached. For > > > example > > > when there are different flashes with the same jedec id. > > > > > > But since the last released kernel, we support a generic SFDP > > > driver, which > > > is used when there is no matching driver for the flash's jedec id. > > > Theoretically, you can build your own flash device (with a unique > > > id) and > > > generate the sfdp tables for that one. > > > > > How about older kernels versions ? Would those still support such > > (virtual ?) > > flash devices ? > > No with older kernels you'd be out of luck. They will just print "unknown > flash > id" and skip the device. That would mean that qemu versions including this change could no longer be used to test flash support on older kernel versions. That would be extremely undesirable. I'd rather live with the current code and still be able to test older kernels. Thanks, Guenter
Am 2023-01-02 19:49, schrieb Guenter Roeck: > On Mon, Jan 02, 2023 at 06:42:03PM +0100, Michael Walle wrote: >> Am 2023-01-02 17:23, schrieb Guenter Roeck: >> > On Mon, Jan 02, 2023 at 04:43:49PM +0100, Michael Walle wrote: >> > > Am 2023-01-02 14:53, schrieb Cédric Le Goater: >> > > > On 12/27/22 07:31, Tudor Ambarus wrote: >> > > > > >> > > > > >> > > > > On 25.12.2022 14:18, Ben Dooks wrote: >> > > > > > On Wed, Dec 21, 2022 at 06:36:02PM +0100, Cédric Le Goater wrote: >> > > > > > > On 12/21/22 13:22, Guenter Roeck wrote: >> > > > > > > > Generated from hardware using the following command and >> > > > > > > > then padding >> > > > > > > > with 0xff to fill out a power-of-2: >> > > > > > > > xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp >> > > > > > > > >> > > > > > > > Cc: Michael Walle <michael@walle.cc> >> > > > > > > > Cc: Tudor Ambarus <tudor.ambarus@linaro.org> >> > > > > > > > Signed-off-by: Guenter Roeck <linux@roeck-us.net> >> > > > > > > >> > > > > > > Reviewed-by: Cédric Le Goater <clg@kaod.org> >> > > > > > >> > > > > > If SFDP is a standard, couldn't we have an function to generate >> > > > > > it from >> > > > > > the flash parameters? >> > > > > > >> > > > > >> > > > > No, it's not practical as you have to specify all the flash parameters >> > > > > at flash declaration. >> > > > >> > > > Indeed and the definition of flash models in QEMU is far to cover all >> > > > the SFDP >> > > > features. The known_devices array of m25p80 would be huge ! However, we >> > > > could >> > > > generate some of the SFDP tables if no raw data is provided. It could be >> > > > useful >> > > > for testing drivers. >> > > >> > > I don't think adding (incomplete) SFDP tables makes sense for any real >> > > devices. E.g. sometimes our linux driver will look at specific bits in >> > > SFDP to figure out what particular flash device is attached. For >> > > example >> > > when there are different flashes with the same jedec id. >> > > >> > > But since the last released kernel, we support a generic SFDP >> > > driver, which >> > > is used when there is no matching driver for the flash's jedec id. >> > > Theoretically, you can build your own flash device (with a unique >> > > id) and >> > > generate the sfdp tables for that one. >> > > >> > How about older kernels versions ? Would those still support such >> > (virtual ?) >> > flash devices ? >> >> No with older kernels you'd be out of luck. They will just print >> "unknown >> flash >> id" and skip the device. > > That would mean that qemu versions including this change could no > longer > be used to test flash support on older kernel versions. That would be > extremely undesirable. I'd rather live with the current code and still > be > able to test older kernels. Your board wouldn't need to use it. I don't think that emulating a real spi flash device would go away. But it might still make sense to have such a flash device, one example already mentioned is for testing drivers. -michael
diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c index 02adc87527..802d2eb021 100644 --- a/hw/block/m25p80.c +++ b/hw/block/m25p80.c @@ -221,7 +221,8 @@ static const FlashPartInfo known_devices[] = { { INFO("is25wp032", 0x9d7016, 0, 64 << 10, 64, ER_4K) }, { INFO("is25wp064", 0x9d7017, 0, 64 << 10, 128, ER_4K) }, { INFO("is25wp128", 0x9d7018, 0, 64 << 10, 256, ER_4K) }, - { INFO("is25wp256", 0x9d7019, 0, 64 << 10, 512, ER_4K) }, + { INFO("is25wp256", 0x9d7019, 0, 64 << 10, 512, ER_4K), + .sfdp_read = m25p80_sfdp_is25wp256 }, /* Macronix */ { INFO("mx25l2005a", 0xc22012, 0, 64 << 10, 4, ER_4K) }, diff --git a/hw/block/m25p80_sfdp.c b/hw/block/m25p80_sfdp.c index 77615fa29e..b33811a4f5 100644 --- a/hw/block/m25p80_sfdp.c +++ b/hw/block/m25p80_sfdp.c @@ -330,3 +330,43 @@ static const uint8_t sfdp_w25q01jvq[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, }; define_sfdp_read(w25q01jvq); + +/* + * Integrated Silicon Solution (ISSI) + */ + +static const uint8_t sfdp_is25wp256[] = { + 0x53, 0x46, 0x44, 0x50, 0x06, 0x01, 0x01, 0xff, + 0x00, 0x06, 0x01, 0x10, 0x30, 0x00, 0x00, 0xff, + 0x9d, 0x05, 0x01, 0x03, 0x80, 0x00, 0x00, 0x02, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xe5, 0x20, 0xf9, 0xff, 0xff, 0xff, 0xff, 0x0f, + 0x44, 0xeb, 0x08, 0x6b, 0x08, 0x3b, 0x80, 0xbb, + 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0xff, + 0xff, 0xff, 0x44, 0xeb, 0x0c, 0x20, 0x0f, 0x52, + 0x10, 0xd8, 0x00, 0xff, 0x23, 0x4a, 0xc9, 0x00, + 0x82, 0xd8, 0x11, 0xce, 0xcc, 0xcd, 0x68, 0x46, + 0x7a, 0x75, 0x7a, 0x75, 0xf7, 0xae, 0xd5, 0x5c, + 0x4a, 0x42, 0x2c, 0xff, 0xf0, 0x30, 0xfa, 0xa9, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0x50, 0x19, 0x50, 0x16, 0x9f, 0xf9, 0xc0, 0x64, + 0x8f, 0xef, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, +}; +define_sfdp_read(is25wp256); diff --git a/hw/block/m25p80_sfdp.h b/hw/block/m25p80_sfdp.h index df7adfb5ce..011a880f66 100644 --- a/hw/block/m25p80_sfdp.h +++ b/hw/block/m25p80_sfdp.h @@ -26,4 +26,6 @@ uint8_t m25p80_sfdp_w25q512jv(uint32_t addr); uint8_t m25p80_sfdp_w25q01jvq(uint32_t addr); +uint8_t m25p80_sfdp_is25wp256(uint32_t addr); + #endif
Generated from hardware using the following command and then padding with 0xff to fill out a power-of-2: xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp Cc: Michael Walle <michael@walle.cc> Cc: Tudor Ambarus <tudor.ambarus@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> --- hw/block/m25p80.c | 3 ++- hw/block/m25p80_sfdp.c | 40 ++++++++++++++++++++++++++++++++++++++++ hw/block/m25p80_sfdp.h | 2 ++ 3 files changed, 44 insertions(+), 1 deletion(-)