diff mbox series

[PULL,15/27] hw/i2c: pmbus: Page #255 is valid page for read requests.

Message ID 20220630112411.1474431-16-clg@kaod.org
State New
Headers show
Series [PULL,01/27] hw: m25p80: add WP# pin and SRWD bit for write protection | expand

Commit Message

Cédric Le Goater June 30, 2022, 11:23 a.m. UTC 
From: Maheswara Kurapati <quic_mkurapat@quicinc.com>

Current implementation of the pmbus core driver treats the read request
for page 255 as invalid request and sets the invalid command bit (bit 7)
in the STATUS_CML register. As per the PMBus specification it is a valid
request.

Refer to the PMBus specification, revision 1.3.1, section 11.10 PAGE,
on the page 58:
  "Setting the PAGE to FFh means that all subsequent comands are to be
   applied to all outputs.

   Some commands, such as READ_TEMPERATURE, may use a common sensor but
   be available on all pages of a device. Such implementations are the
   decision of each device manufacturer or are specified in a PMBus
   Application Profile. Consult the manufacturer's documents or the
   Application Profile Specification as needed."

For e.g.,
The VOUT_MODE is a valid command for page 255 for maxim 31785 device.
refer to Table 1. PMBus Command Codes on page 14 in the datasheet.
https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf

Fixes: 38870253f1d1 ("hw/i2c: pmbus: fix error returns and guard against out of range accesses")

Signed-off-by: Maheswara Kurapati <quic_mkurapat@quicinc.com>
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Titus Rwantare <titusr@google.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220627154703.148943-4-quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 hw/i2c/pmbus_device.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/hw/i2c/pmbus_device.c b/hw/i2c/pmbus_device.c
index 62885fa6a15e..749a33af827b 100644
--- a/hw/i2c/pmbus_device.c
+++ b/hw/i2c/pmbus_device.c
@@ -284,14 +284,10 @@  static uint8_t pmbus_receive_byte(SMBusDevice *smd)
 
     /*
      * Reading from all pages will return the value from page 0,
-     * this is unspecified behaviour in general.
+     * means that all subsequent commands are to be applied to all output.
      */
     if (pmdev->page == PB_ALL_PAGES) {
         index = 0;
-        qemu_log_mask(LOG_GUEST_ERROR,
-                      "%s: tried to read from all pages\n",
-                      __func__);
-        pmbus_cml_error(pmdev);
     } else if (pmdev->page > pmdev->num_pages - 1) {
         qemu_log_mask(LOG_GUEST_ERROR,
                       "%s: page %d is out of range\n",