@@ -1305,6 +1305,8 @@ static int pxa2xx_i2c_event(I2CSlave *i2c, enum i2c_event event)
case I2C_NACK:
s->status |= 1 << 1; /* set ACKNAK */
break;
+ default:
+ return -1;
}
pxa2xx_i2c_update(s);
@@ -76,6 +76,8 @@ static int sii9022_event(I2CSlave *i2c, enum i2c_event event)
break;
case I2C_NACK:
break;
+ default:
+ return -1;
}
return 0;
@@ -196,6 +196,8 @@ static int ssd0303_event(I2CSlave *i2c, enum i2c_event event)
case I2C_NACK:
/* Nothing to do. */
break;
+ default:
+ return -1;
}
return 0;
@@ -161,7 +161,8 @@ static int i2c_do_start_transfer(I2CBus *bus, uint8_t address,
start condition. */
if (sc->event) {
- trace_i2c_event("start", s->address);
+ trace_i2c_event(event == I2C_START_SEND ? "start" : "start_async",
+ s->address);
rv = sc->event(s, event);
if (rv && !bus->broadcast) {
if (bus_scanned) {
@@ -212,6 +213,11 @@ int i2c_start_send(I2CBus *bus, uint8_t address)
return i2c_do_start_transfer(bus, address, I2C_START_SEND);
}
+int i2c_start_send_async(I2CBus *bus, uint8_t address)
+{
+ return i2c_do_start_transfer(bus, address, I2C_START_SEND_ASYNC);
+}
+
void i2c_end_transfer(I2CBus *bus)
{
I2CSlaveClass *sc;
@@ -261,6 +267,23 @@ int i2c_send(I2CBus *bus, uint8_t data)
return ret ? -1 : 0;
}
+int i2c_send_async(I2CBus *bus, uint8_t data)
+{
+ I2CNode *node = QLIST_FIRST(&bus->current_devs);
+ I2CSlave *slave = node->elt;
+ I2CSlaveClass *sc = I2C_SLAVE_GET_CLASS(slave);
+
+ if (!sc->send_async) {
+ return -1;
+ }
+
+ trace_i2c_send_async(slave->address, data);
+
+ sc->send_async(slave, data);
+
+ return 0;
+}
+
uint8_t i2c_recv(I2CBus *bus)
{
uint8_t data = 0xff;
@@ -297,6 +320,17 @@ void i2c_nack(I2CBus *bus)
}
}
+void i2c_ack(I2CBus *bus)
+{
+ if (!bus->bh) {
+ return;
+ }
+
+ trace_i2c_ack();
+
+ qemu_bh_schedule(bus->bh);
+}
+
static int i2c_slave_post_load(void *opaque, int version_id)
{
I2CSlave *dev = opaque;
@@ -143,6 +143,10 @@ static int smbus_i2c_event(I2CSlave *s, enum i2c_event event)
dev->mode = SMBUS_CONFUSED;
break;
}
+ break;
+
+ default:
+ return -1;
}
return 0;
@@ -4,7 +4,9 @@
i2c_event(const char *event, uint8_t address) "%s(addr:0x%02x)"
i2c_send(uint8_t address, uint8_t data) "send(addr:0x%02x) data:0x%02x"
+i2c_send_async(uint8_t address, uint8_t data) "send_async(addr:0x%02x) data:0x%02x"
i2c_recv(uint8_t address, uint8_t data) "recv(addr:0x%02x) data:0x%02x"
+i2c_ack(void) ""
# aspeed_i2c.c
@@ -75,6 +75,8 @@ int at24c_eeprom_event(I2CSlave *s, enum i2c_event event)
break;
case I2C_NACK:
break;
+ default:
+ return -1;
}
return 0;
}
@@ -427,6 +427,8 @@ static int lsm303dlhc_mag_event(I2CSlave *i2c, enum i2c_event event)
break;
case I2C_NACK:
break;
+ default:
+ return -1;
}
s->len = 0;
@@ -12,6 +12,7 @@
enum i2c_event {
I2C_START_RECV,
I2C_START_SEND,
+ I2C_START_SEND_ASYNC,
I2C_FINISH,
I2C_NACK /* Masker NACKed a receive byte. */
};
@@ -28,6 +29,9 @@ struct I2CSlaveClass {
/* Master to slave. Returns non-zero for a NAK, 0 for success. */
int (*send)(I2CSlave *s, uint8_t data);
+ /* Master to slave (asynchronous). Receiving slave must call i2c_ack(). */
+ void (*send_async)(I2CSlave *s, uint8_t data);
+
/*
* Slave to master. This cannot fail, the device should always
* return something here.
@@ -127,11 +131,23 @@ int i2c_start_recv(I2CBus *bus, uint8_t address);
*/
int i2c_start_send(I2CBus *bus, uint8_t address);
+/**
+ * i2c_start_send_async: start an asynchronous 'send' transfer on an I2C bus.
+ *
+ * @bus: #I2CBus to be used
+ * @address: address of the slave
+ *
+ * Return: 0 on success, -1 on error
+ */
+int i2c_start_send_async(I2CBus *bus, uint8_t address);
+
void i2c_end_transfer(I2CBus *bus);
void i2c_nack(I2CBus *bus);
+void i2c_ack(I2CBus *bus);
void i2c_bus_master(I2CBus *bus, QEMUBH *bh);
void i2c_bus_release(I2CBus *bus);
int i2c_send(I2CBus *bus, uint8_t data);
+int i2c_send_async(I2CBus *bus, uint8_t data);
uint8_t i2c_recv(I2CBus *bus);
bool i2c_scan_bus(I2CBus *bus, uint8_t address, bool broadcast,
I2CNodeList *current_devs);