| Message ID | 20210414032343.1720010-2-npiggin@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | ppc: rework AIL logic, add POWER10 exception model | expand |
On 4/14/21 5:23 AM, Nicholas Piggin wrote: > The AIL logic is becoming unmanageable spread all over powerpc_excp(), > and it is slated to get even worse with POWER10 support. > > Move it all to a new helper function. Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Thanks for the effort and the documentation. One minor comment below, C. > > Signed-off-by: Nicholas Piggin <npiggin@gmail.com> > --- > hw/ppc/spapr_hcall.c | 3 +- > target/ppc/cpu.h | 8 -- > target/ppc/excp_helper.c | 161 ++++++++++++++++++++------------ > target/ppc/translate_init.c.inc | 2 +- > 4 files changed, 104 insertions(+), 70 deletions(-) > > diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c > index 7b5cd3553c..2fbe04a689 100644 > --- a/hw/ppc/spapr_hcall.c > +++ b/hw/ppc/spapr_hcall.c > @@ -1395,7 +1395,8 @@ static target_ulong h_set_mode_resource_addr_trans_mode(PowerPCCPU *cpu, > return H_P4; > } > > - if (mflags == AIL_RESERVED) { > + if (mflags == 1) { > + /* AIL=1 is reserved */ > return H_UNSUPPORTED_FLAG; > } > > diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h > index e73416da68..5200a16d23 100644 > --- a/target/ppc/cpu.h > +++ b/target/ppc/cpu.h > @@ -2375,14 +2375,6 @@ enum { > HMER_XSCOM_STATUS_MASK = PPC_BITMASK(21, 23), > }; > > -/* Alternate Interrupt Location (AIL) */ > -enum { > - AIL_NONE = 0, > - AIL_RESERVED = 1, > - AIL_0001_8000 = 2, > - AIL_C000_0000_0000_4000 = 3, > -}; I kind of like these. No big deal. > - > /*****************************************************************************/ > > #define is_isa300(ctx) (!!(ctx->insns_flags2 & PPC2_ISA300)) > diff --git a/target/ppc/excp_helper.c b/target/ppc/excp_helper.c > index b8881c0f85..9ff316767c 100644 > --- a/target/ppc/excp_helper.c > +++ b/target/ppc/excp_helper.c > @@ -136,25 +136,107 @@ static int powerpc_reset_wakeup(CPUState *cs, CPUPPCState *env, int excp, > return POWERPC_EXCP_RESET; > } > > -static uint64_t ppc_excp_vector_offset(CPUState *cs, int ail) > +/* > + * AIL - Alternate Interrupt Location, a mode that allows interrupts to be > + * taken with the MMU on, and which uses an alternate location (e.g., so the > + * kernel/hv can map the vectors there with an effective address). > + * > + * An interrupt is considered to be taken "with AIL" or "AIL applies" if they > + * are delivered in this way. AIL requires the LPCR to be set to enable this > + * mode, and a number of conditions have to be true for AIL to apply. > + * > + * First of all, SRESET, MCE, and HMI are always delivered without AIL, > + * because they are specifically want to be in real mode (e.g., MCE might > + * be signaling a SLB multi-hit which requires SLB flush before the MMU can > + * be enabled). > + * > + * After that, behaviour depends on the current MSR[IR], MSR[DR], MSR[HV], and > + * whether or not the interrupt changes MSR[HV] from 0 to 1, and the current > + * radix mode (LPCR[HR]). > + * > + * POWER8, POWER9 with LPCR[HR]=0 > + * | LPCR[AIL] | MSR[IR||DR] | MSR[HV] | new MSR[HV] | AIL | > + * +-----------+-------------+---------+-------------+-----+ > + * | a | 00/01/10 | x | x | 0 | > + * | a | 11 | 0 | 1 | 0 | > + * | a | 11 | 1 | 1 | a | > + * | a | 11 | 0 | 0 | a | > + * +-------------------------------------------------------+ > + * > + * POWER9 with LPCR[HR]=1 > + * | LPCR[AIL] | MSR[IR||DR] | MSR[HV] | new MSR[HV] | AIL | > + * +-----------+-------------+---------+-------------+-----+ > + * | a | 00/01/10 | x | x | 0 | > + * | a | 11 | x | x | a | > + * +-------------------------------------------------------+ > + * > + * The difference with POWER9 being that MSR[HV] 0->1 interrupts can be > + * sent to the hypervisor in AIL mode if the guest is radix (LPCR[HR]=1). > + */ > +static inline void ppc_excp_apply_ail(PowerPCCPU *cpu, int excp_model, int excp, > + target_ulong msr, > + target_ulong *new_msr, > + target_ulong *vector) > { > - uint64_t offset = 0; > +#if defined(TARGET_PPC64) > + CPUPPCState *env = &cpu->env; > + bool mmu_all_on = ((msr >> MSR_IR) & 1) && ((msr >> MSR_DR) & 1); > + bool hv_escalation = !(msr & MSR_HVB) && (*new_msr & MSR_HVB); > + int ail = 0; > + > + if (excp == POWERPC_EXCP_MCHECK || > + excp == POWERPC_EXCP_RESET || > + excp == POWERPC_EXCP_HV_MAINT) { > + /* SRESET, MCE, HMI never apply AIL */ > + return; > + } > > - switch (ail) { > - case AIL_NONE: > - break; > - case AIL_0001_8000: > - offset = 0x18000; > - break; > - case AIL_C000_0000_0000_4000: > - offset = 0xc000000000004000ull; > - break; > - default: > - cpu_abort(cs, "Invalid AIL combination %d\n", ail); Could we keep this abort ? > - break; > + if (excp_model == POWERPC_EXCP_POWER8 || > + excp_model == POWERPC_EXCP_POWER9) { > + if (!mmu_all_on) { > + /* AIL only works if MSR[IR] and MSR[DR] are both enabled. */ > + return; > + } > + if (hv_escalation && !(env->spr[SPR_LPCR] & LPCR_HR)) { > + /* > + * AIL does not work if there is a MSR[HV] 0->1 transition and the > + * partition is in HPT mode. For radix guests, such interrupts are > + * allowed to be delivered to the hypervisor in ail mode. > + */ > + return; > + } > + > + ail = (env->spr[SPR_LPCR] & LPCR_AIL) >> LPCR_AIL_SHIFT; > + if (ail != 2 && ail != 3) { > + /* AIL=1 is reserved */ > + return; > + } > + } else { > + /* Other processors do not support AIL */ > + return; > } > > - return offset; > + /* > + * AIL applies, so the new MSR gets IR and DR set, and an offset applied > + * to the new IP. > + */ > + *new_msr |= (1 << MSR_IR) | (1 << MSR_DR); > + > + if (excp != POWERPC_EXCP_SYSCALL_VECTORED) { > + if (ail == 2) { > + *vector |= 0x0000000000018000ull; > + } else if (ail == 3) { > + *vector |= 0xc000000000004000ull; > + } > + } else { > + /* scv AIL is a little different */ > + if (ail == 3) { > + /* Un-apply the base offset */ > + *vector &= ~0x0000000000017000ull; > + *vector |= 0xc000000000003000ull; > + } > + } > +#endif > } > > static inline void powerpc_set_excp_state(PowerPCCPU *cpu, > @@ -197,7 +279,7 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp) > CPUState *cs = CPU(cpu); > CPUPPCState *env = &cpu->env; > target_ulong msr, new_msr, vector; > - int srr0, srr1, asrr0, asrr1, lev = -1, ail; > + int srr0, srr1, asrr0, asrr1, lev = -1; > bool lpes0; > > qemu_log_mask(CPU_LOG_INT, "Raise exception at " TARGET_FMT_lx > @@ -238,25 +320,16 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp) > * > * On anything else, we behave as if LPES0 is 1 > * (externals don't alter MSR:HV) > - * > - * AIL is initialized here but can be cleared by > - * selected exceptions > */ > #if defined(TARGET_PPC64) > if (excp_model == POWERPC_EXCP_POWER7 || > excp_model == POWERPC_EXCP_POWER8 || > excp_model == POWERPC_EXCP_POWER9) { > lpes0 = !!(env->spr[SPR_LPCR] & LPCR_LPES0); > - if (excp_model != POWERPC_EXCP_POWER7) { > - ail = (env->spr[SPR_LPCR] & LPCR_AIL) >> LPCR_AIL_SHIFT; > - } else { > - ail = 0; > - } > } else > #endif /* defined(TARGET_PPC64) */ > { > lpes0 = true; > - ail = 0; > } > > /* > @@ -315,7 +388,6 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp) > */ > new_msr |= (target_ulong)MSR_HVB; > } > - ail = 0; > > /* machine check exceptions don't have ME set */ > new_msr &= ~((target_ulong)1 << MSR_ME); > @@ -519,7 +591,6 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp) > "exception %d with no HV support\n", excp); > } > } > - ail = 0; > break; > case POWERPC_EXCP_DSEG: /* Data segment exception */ > case POWERPC_EXCP_ISEG: /* Instruction segment exception */ > @@ -790,24 +861,6 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp) > } > #endif > > - /* > - * AIL only works if MSR[IR] and MSR[DR] are both enabled. > - */ > - if (!((msr >> MSR_IR) & 1) || !((msr >> MSR_DR) & 1)) { > - ail = 0; > - } > - > - /* > - * AIL does not work if there is a MSR[HV] 0->1 transition and the > - * partition is in HPT mode. For radix guests, such interrupts are > - * allowed to be delivered to the hypervisor in ail mode. > - */ > - if ((new_msr & MSR_HVB) && !(msr & MSR_HVB)) { > - if (!(env->spr[SPR_LPCR] & LPCR_HR)) { > - ail = 0; > - } > - } > - > vector = env->excp_vectors[excp]; > if (vector == (target_ulong)-1ULL) { > cpu_abort(cs, "Raised an exception without defined vector %d\n", > @@ -848,23 +901,8 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp) > /* Save MSR */ > env->spr[srr1] = msr; > > - /* Handle AIL */ > - if (ail) { > - new_msr |= (1 << MSR_IR) | (1 << MSR_DR); > - vector |= ppc_excp_vector_offset(cs, ail); > - } > - > #if defined(TARGET_PPC64) > } else { > - /* scv AIL is a little different */ > - if (ail) { > - new_msr |= (1 << MSR_IR) | (1 << MSR_DR); > - } > - if (ail == AIL_C000_0000_0000_4000) { > - vector |= 0xc000000000003000ull; > - } else { > - vector |= 0x0000000000017000ull; > - } > vector += lev * 0x20; > > env->lr = env->nip; > @@ -872,6 +910,9 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp) > #endif > } > > + /* This can update new_msr and vector if AIL applies */ > + ppc_excp_apply_ail(cpu, excp_model, excp, msr, &new_msr, &vector); > + > powerpc_set_excp_state(cpu, vector, new_msr); > } > > diff --git a/target/ppc/translate_init.c.inc b/target/ppc/translate_init.c.inc > index 70f9b9b150..a82d9ed647 100644 > --- a/target/ppc/translate_init.c.inc > +++ b/target/ppc/translate_init.c.inc > @@ -3457,7 +3457,7 @@ static void init_excp_POWER9(CPUPPCState *env) > > #if !defined(CONFIG_USER_ONLY) > env->excp_vectors[POWERPC_EXCP_HVIRT] = 0x00000EA0; > - env->excp_vectors[POWERPC_EXCP_SYSCALL_VECTORED] = 0x00000000; > + env->excp_vectors[POWERPC_EXCP_SYSCALL_VECTORED] = 0x00017000; > #endif > } >
Excerpts from Cédric Le Goater's message of April 15, 2021 1:24 am: > On 4/14/21 5:23 AM, Nicholas Piggin wrote: >> The AIL logic is becoming unmanageable spread all over powerpc_excp(), >> and it is slated to get even worse with POWER10 support. >> >> Move it all to a new helper function. > > Reviewed-by: Cédric Le Goater <clg@kaod.org> > Tested-by: Cédric Le Goater <clg@kaod.org> > > Thanks for the effort and the documentation. One minor comment below, > > C. > >> >> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> >> --- >> hw/ppc/spapr_hcall.c | 3 +- >> target/ppc/cpu.h | 8 -- >> target/ppc/excp_helper.c | 161 ++++++++++++++++++++------------ >> target/ppc/translate_init.c.inc | 2 +- >> 4 files changed, 104 insertions(+), 70 deletions(-) >> >> diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c >> index 7b5cd3553c..2fbe04a689 100644 >> --- a/hw/ppc/spapr_hcall.c >> +++ b/hw/ppc/spapr_hcall.c >> @@ -1395,7 +1395,8 @@ static target_ulong h_set_mode_resource_addr_trans_mode(PowerPCCPU *cpu, >> return H_P4; >> } >> >> - if (mflags == AIL_RESERVED) { >> + if (mflags == 1) { >> + /* AIL=1 is reserved */ >> return H_UNSUPPORTED_FLAG; >> } >> >> diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h >> index e73416da68..5200a16d23 100644 >> --- a/target/ppc/cpu.h >> +++ b/target/ppc/cpu.h >> @@ -2375,14 +2375,6 @@ enum { >> HMER_XSCOM_STATUS_MASK = PPC_BITMASK(21, 23), >> }; >> >> -/* Alternate Interrupt Location (AIL) */ >> -enum { >> - AIL_NONE = 0, >> - AIL_RESERVED = 1, >> - AIL_0001_8000 = 2, >> - AIL_C000_0000_0000_4000 = 3, >> -}; > > I kind of like these. No big deal. My thinking was they actually are just a POWER8 model of the AIL bits (e.g., they don't represent scv properly or AIL=2 reserved in P10), and they spread the meaning over multiple files. After this patch it's all just in that single function. >> >> - switch (ail) { >> - case AIL_NONE: >> - break; >> - case AIL_0001_8000: >> - offset = 0x18000; >> - break; >> - case AIL_C000_0000_0000_4000: >> - offset = 0xc000000000004000ull; >> - break; >> - default: >> - cpu_abort(cs, "Invalid AIL combination %d\n", ail); > > Could we keep this abort ? Well the abort is no longer there because we explicitly handle all cases, the reserved ones by just ignoring them. I don't know what the hardware actually does if you tried to set it (it should ignore) but I think this is nicer to not abort. Thanks, Nick
diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c index 7b5cd3553c..2fbe04a689 100644 --- a/hw/ppc/spapr_hcall.c +++ b/hw/ppc/spapr_hcall.c @@ -1395,7 +1395,8 @@ static target_ulong h_set_mode_resource_addr_trans_mode(PowerPCCPU *cpu, return H_P4; } - if (mflags == AIL_RESERVED) { + if (mflags == 1) { + /* AIL=1 is reserved */ return H_UNSUPPORTED_FLAG; } diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h index e73416da68..5200a16d23 100644 --- a/target/ppc/cpu.h +++ b/target/ppc/cpu.h @@ -2375,14 +2375,6 @@ enum { HMER_XSCOM_STATUS_MASK = PPC_BITMASK(21, 23), }; -/* Alternate Interrupt Location (AIL) */ -enum { - AIL_NONE = 0, - AIL_RESERVED = 1, - AIL_0001_8000 = 2, - AIL_C000_0000_0000_4000 = 3, -}; - /*****************************************************************************/ #define is_isa300(ctx) (!!(ctx->insns_flags2 & PPC2_ISA300)) diff --git a/target/ppc/excp_helper.c b/target/ppc/excp_helper.c index b8881c0f85..9ff316767c 100644 --- a/target/ppc/excp_helper.c +++ b/target/ppc/excp_helper.c @@ -136,25 +136,107 @@ static int powerpc_reset_wakeup(CPUState *cs, CPUPPCState *env, int excp, return POWERPC_EXCP_RESET; } -static uint64_t ppc_excp_vector_offset(CPUState *cs, int ail) +/* + * AIL - Alternate Interrupt Location, a mode that allows interrupts to be + * taken with the MMU on, and which uses an alternate location (e.g., so the + * kernel/hv can map the vectors there with an effective address). + * + * An interrupt is considered to be taken "with AIL" or "AIL applies" if they + * are delivered in this way. AIL requires the LPCR to be set to enable this + * mode, and a number of conditions have to be true for AIL to apply. + * + * First of all, SRESET, MCE, and HMI are always delivered without AIL, + * because they are specifically want to be in real mode (e.g., MCE might + * be signaling a SLB multi-hit which requires SLB flush before the MMU can + * be enabled). + * + * After that, behaviour depends on the current MSR[IR], MSR[DR], MSR[HV], and + * whether or not the interrupt changes MSR[HV] from 0 to 1, and the current + * radix mode (LPCR[HR]). + * + * POWER8, POWER9 with LPCR[HR]=0 + * | LPCR[AIL] | MSR[IR||DR] | MSR[HV] | new MSR[HV] | AIL | + * +-----------+-------------+---------+-------------+-----+ + * | a | 00/01/10 | x | x | 0 | + * | a | 11 | 0 | 1 | 0 | + * | a | 11 | 1 | 1 | a | + * | a | 11 | 0 | 0 | a | + * +-------------------------------------------------------+ + * + * POWER9 with LPCR[HR]=1 + * | LPCR[AIL] | MSR[IR||DR] | MSR[HV] | new MSR[HV] | AIL | + * +-----------+-------------+---------+-------------+-----+ + * | a | 00/01/10 | x | x | 0 | + * | a | 11 | x | x | a | + * +-------------------------------------------------------+ + * + * The difference with POWER9 being that MSR[HV] 0->1 interrupts can be + * sent to the hypervisor in AIL mode if the guest is radix (LPCR[HR]=1). + */ +static inline void ppc_excp_apply_ail(PowerPCCPU *cpu, int excp_model, int excp, + target_ulong msr, + target_ulong *new_msr, + target_ulong *vector) { - uint64_t offset = 0; +#if defined(TARGET_PPC64) + CPUPPCState *env = &cpu->env; + bool mmu_all_on = ((msr >> MSR_IR) & 1) && ((msr >> MSR_DR) & 1); + bool hv_escalation = !(msr & MSR_HVB) && (*new_msr & MSR_HVB); + int ail = 0; + + if (excp == POWERPC_EXCP_MCHECK || + excp == POWERPC_EXCP_RESET || + excp == POWERPC_EXCP_HV_MAINT) { + /* SRESET, MCE, HMI never apply AIL */ + return; + } - switch (ail) { - case AIL_NONE: - break; - case AIL_0001_8000: - offset = 0x18000; - break; - case AIL_C000_0000_0000_4000: - offset = 0xc000000000004000ull; - break; - default: - cpu_abort(cs, "Invalid AIL combination %d\n", ail); - break; + if (excp_model == POWERPC_EXCP_POWER8 || + excp_model == POWERPC_EXCP_POWER9) { + if (!mmu_all_on) { + /* AIL only works if MSR[IR] and MSR[DR] are both enabled. */ + return; + } + if (hv_escalation && !(env->spr[SPR_LPCR] & LPCR_HR)) { + /* + * AIL does not work if there is a MSR[HV] 0->1 transition and the + * partition is in HPT mode. For radix guests, such interrupts are + * allowed to be delivered to the hypervisor in ail mode. + */ + return; + } + + ail = (env->spr[SPR_LPCR] & LPCR_AIL) >> LPCR_AIL_SHIFT; + if (ail != 2 && ail != 3) { + /* AIL=1 is reserved */ + return; + } + } else { + /* Other processors do not support AIL */ + return; } - return offset; + /* + * AIL applies, so the new MSR gets IR and DR set, and an offset applied + * to the new IP. + */ + *new_msr |= (1 << MSR_IR) | (1 << MSR_DR); + + if (excp != POWERPC_EXCP_SYSCALL_VECTORED) { + if (ail == 2) { + *vector |= 0x0000000000018000ull; + } else if (ail == 3) { + *vector |= 0xc000000000004000ull; + } + } else { + /* scv AIL is a little different */ + if (ail == 3) { + /* Un-apply the base offset */ + *vector &= ~0x0000000000017000ull; + *vector |= 0xc000000000003000ull; + } + } +#endif } static inline void powerpc_set_excp_state(PowerPCCPU *cpu, @@ -197,7 +279,7 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp) CPUState *cs = CPU(cpu); CPUPPCState *env = &cpu->env; target_ulong msr, new_msr, vector; - int srr0, srr1, asrr0, asrr1, lev = -1, ail; + int srr0, srr1, asrr0, asrr1, lev = -1; bool lpes0; qemu_log_mask(CPU_LOG_INT, "Raise exception at " TARGET_FMT_lx @@ -238,25 +320,16 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp) * * On anything else, we behave as if LPES0 is 1 * (externals don't alter MSR:HV) - * - * AIL is initialized here but can be cleared by - * selected exceptions */ #if defined(TARGET_PPC64) if (excp_model == POWERPC_EXCP_POWER7 || excp_model == POWERPC_EXCP_POWER8 || excp_model == POWERPC_EXCP_POWER9) { lpes0 = !!(env->spr[SPR_LPCR] & LPCR_LPES0); - if (excp_model != POWERPC_EXCP_POWER7) { - ail = (env->spr[SPR_LPCR] & LPCR_AIL) >> LPCR_AIL_SHIFT; - } else { - ail = 0; - } } else #endif /* defined(TARGET_PPC64) */ { lpes0 = true; - ail = 0; } /* @@ -315,7 +388,6 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp) */ new_msr |= (target_ulong)MSR_HVB; } - ail = 0; /* machine check exceptions don't have ME set */ new_msr &= ~((target_ulong)1 << MSR_ME); @@ -519,7 +591,6 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp) "exception %d with no HV support\n", excp); } } - ail = 0; break; case POWERPC_EXCP_DSEG: /* Data segment exception */ case POWERPC_EXCP_ISEG: /* Instruction segment exception */ @@ -790,24 +861,6 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp) } #endif - /* - * AIL only works if MSR[IR] and MSR[DR] are both enabled. - */ - if (!((msr >> MSR_IR) & 1) || !((msr >> MSR_DR) & 1)) { - ail = 0; - } - - /* - * AIL does not work if there is a MSR[HV] 0->1 transition and the - * partition is in HPT mode. For radix guests, such interrupts are - * allowed to be delivered to the hypervisor in ail mode. - */ - if ((new_msr & MSR_HVB) && !(msr & MSR_HVB)) { - if (!(env->spr[SPR_LPCR] & LPCR_HR)) { - ail = 0; - } - } - vector = env->excp_vectors[excp]; if (vector == (target_ulong)-1ULL) { cpu_abort(cs, "Raised an exception without defined vector %d\n", @@ -848,23 +901,8 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp) /* Save MSR */ env->spr[srr1] = msr; - /* Handle AIL */ - if (ail) { - new_msr |= (1 << MSR_IR) | (1 << MSR_DR); - vector |= ppc_excp_vector_offset(cs, ail); - } - #if defined(TARGET_PPC64) } else { - /* scv AIL is a little different */ - if (ail) { - new_msr |= (1 << MSR_IR) | (1 << MSR_DR); - } - if (ail == AIL_C000_0000_0000_4000) { - vector |= 0xc000000000003000ull; - } else { - vector |= 0x0000000000017000ull; - } vector += lev * 0x20; env->lr = env->nip; @@ -872,6 +910,9 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int excp_model, int excp) #endif } + /* This can update new_msr and vector if AIL applies */ + ppc_excp_apply_ail(cpu, excp_model, excp, msr, &new_msr, &vector); + powerpc_set_excp_state(cpu, vector, new_msr); } diff --git a/target/ppc/translate_init.c.inc b/target/ppc/translate_init.c.inc index 70f9b9b150..a82d9ed647 100644 --- a/target/ppc/translate_init.c.inc +++ b/target/ppc/translate_init.c.inc @@ -3457,7 +3457,7 @@ static void init_excp_POWER9(CPUPPCState *env) #if !defined(CONFIG_USER_ONLY) env->excp_vectors[POWERPC_EXCP_HVIRT] = 0x00000EA0; - env->excp_vectors[POWERPC_EXCP_SYSCALL_VECTORED] = 0x00000000; + env->excp_vectors[POWERPC_EXCP_SYSCALL_VECTORED] = 0x00017000; #endif }
The AIL logic is becoming unmanageable spread all over powerpc_excp(), and it is slated to get even worse with POWER10 support. Move it all to a new helper function. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> --- hw/ppc/spapr_hcall.c | 3 +- target/ppc/cpu.h | 8 -- target/ppc/excp_helper.c | 161 ++++++++++++++++++++------------ target/ppc/translate_init.c.inc | 2 +- 4 files changed, 104 insertions(+), 70 deletions(-)