Message ID | 20210126074254.3225-6-lulu@redhat.com |
---|---|
State | New |
Headers | show |
Series | vhost-vdpa: add support for configure interrupt | expand |
On Tue, Jan 26, 2021 at 03:42:54PM +0800, Cindy Lu wrote: >Add call back function for configure interrupt. >Set the notifier's fd to the kernel driver when vdpa start. >also set -1 while vdpa stop. then the kernel will release >the related resource > >Signed-off-by: Cindy Lu <lulu@redhat.com> >--- > hw/virtio/trace-events | 2 ++ > hw/virtio/vhost-vdpa.c | 37 ++++++++++++++++++++++++++++++- > include/hw/virtio/vhost-backend.h | 4 ++++ > 3 files changed, 42 insertions(+), 1 deletion(-) > >diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events >index 2060a144a2..6710835b46 100644 >--- a/hw/virtio/trace-events >+++ b/hw/virtio/trace-events >@@ -52,6 +52,8 @@ vhost_vdpa_set_vring_call(void *dev, unsigned int index, int fd) "dev: %p index: > vhost_vdpa_get_features(void *dev, uint64_t features) "dev: %p features: 0x%"PRIx64 > vhost_vdpa_set_owner(void *dev) "dev: %p" > vhost_vdpa_vq_get_addr(void *dev, void *vq, uint64_t desc_user_addr, uint64_t avail_user_addr, uint64_t used_user_addr) "dev: %p vq: %p desc_user_addr: 0x%"PRIx64" avail_user_addr: 0x%"PRIx64" used_user_addr: 0x%"PRIx64 >+vhost_vdpa_set_config_call(void *dev, int *fd)"dev: %p fd: %p" >+ > > # virtio.c > virtqueue_alloc_element(void *elem, size_t sz, unsigned in_num, unsigned out_num) "elem %p size %zd in_num %u out_num %u" >diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c >index 01d2101d09..cc1d39d663 100644 >--- a/hw/virtio/vhost-vdpa.c >+++ b/hw/virtio/vhost-vdpa.c >@@ -467,20 +467,47 @@ static int vhost_vdpa_get_config(struct vhost_dev *dev, uint8_t *config, > } > return ret; > } >+static void vhost_vdpa_config_notify_start(struct vhost_dev *dev, >+ struct VirtIODevice *vdev, bool start) >+{ >+ int fd, r; >+ if (start) { >+ fd = event_notifier_get_fd(&vdev->config_notifier); >+ vdev->use_config_notifier = true; >+ } else { ^ >+ fd = -1; >+ vdev->use_config_notifier = false; >+ } ^ >+ /*set the fd call back to vdpa driver*/ ^ It seems to me that there is an extra space in these places. >+ r = dev->vhost_ops->vhost_set_config_call(dev, &fd); >+ if (r) { >+ vdev->use_config_notifier = false; >+ info_report("vhost_vdpa_config_notify not started!"); >+ } >+ /*active the config_notifier when vdev->use_config_notifier is true*/ >+ if ((vdev->use_config_notifier) && (start)) { >+ event_notifier_set(&vdev->config_notifier); >+ } >+ return; > >+} Here and also in other patches I would leave a new line between two functions. > static int vhost_vdpa_dev_start(struct vhost_dev *dev, bool started) > { > struct vhost_vdpa *v = dev->opaque; > trace_vhost_vdpa_dev_start(dev, started); >+ VirtIODevice *vdev = dev->vdev; >+ > if (started) { > uint8_t status = 0; > memory_listener_register(&v->listener, &address_space_memory); > vhost_vdpa_set_vring_ready(dev); > vhost_vdpa_add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK); > vhost_vdpa_call(dev, VHOST_VDPA_GET_STATUS, &status); >- >+ /*set the configure interrupt call back*/ >+ vhost_vdpa_config_notify_start(dev, vdev, true); > return !(status & VIRTIO_CONFIG_S_DRIVER_OK); > } else { >+ vhost_vdpa_config_notify_start(dev, vdev, false); > vhost_vdpa_reset_device(dev); > vhost_vdpa_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE | > VIRTIO_CONFIG_S_DRIVER); >@@ -546,6 +573,13 @@ static int vhost_vdpa_set_vring_call(struct vhost_dev *dev, > return vhost_vdpa_call(dev, VHOST_SET_VRING_CALL, file); > } > >+static int vhost_vdpa_set_config_call(struct vhost_dev *dev, >+ int *fd) >+{ >+ trace_vhost_vdpa_set_config_call(dev, fd); >+ return vhost_vdpa_call(dev, VHOST_VDPA_SET_CONFIG_CALL, fd); >+} >+ > static int vhost_vdpa_get_features(struct vhost_dev *dev, > uint64_t *features) > { >@@ -611,4 +645,5 @@ const VhostOps vdpa_ops = { > .vhost_get_device_id = vhost_vdpa_get_device_id, > .vhost_vq_get_addr = vhost_vdpa_vq_get_addr, > .vhost_force_iommu = vhost_vdpa_force_iommu, >+ .vhost_set_config_call = vhost_vdpa_set_config_call, > }; >diff --git a/include/hw/virtio/vhost-backend.h b/include/hw/virtio/vhost-backend.h >index 8a6f8e2a7a..1a2fee8994 100644 >--- a/include/hw/virtio/vhost-backend.h >+++ b/include/hw/virtio/vhost-backend.h >@@ -125,6 +125,9 @@ typedef int (*vhost_get_device_id_op)(struct vhost_dev *dev, uint32_t *dev_id); > > typedef bool (*vhost_force_iommu_op)(struct vhost_dev *dev); > >+typedef int (*vhost_set_config_call_op)(struct vhost_dev *dev, >+ int *fd); ^ One more space :-) Thanks, Stefano
On Tue, Jan 26, 2021 at 10:53 PM Stefano Garzarella <sgarzare@redhat.com> wrote: > > On Tue, Jan 26, 2021 at 03:42:54PM +0800, Cindy Lu wrote: > >Add call back function for configure interrupt. > >Set the notifier's fd to the kernel driver when vdpa start. > >also set -1 while vdpa stop. then the kernel will release > >the related resource > > > >Signed-off-by: Cindy Lu <lulu@redhat.com> > >--- > > hw/virtio/trace-events | 2 ++ > > hw/virtio/vhost-vdpa.c | 37 ++++++++++++++++++++++++++++++- > > include/hw/virtio/vhost-backend.h | 4 ++++ > > 3 files changed, 42 insertions(+), 1 deletion(-) > > > >diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events > >index 2060a144a2..6710835b46 100644 > >--- a/hw/virtio/trace-events > >+++ b/hw/virtio/trace-events > >@@ -52,6 +52,8 @@ vhost_vdpa_set_vring_call(void *dev, unsigned int index, int fd) "dev: %p index: > > vhost_vdpa_get_features(void *dev, uint64_t features) "dev: %p features: 0x%"PRIx64 > > vhost_vdpa_set_owner(void *dev) "dev: %p" > > vhost_vdpa_vq_get_addr(void *dev, void *vq, uint64_t desc_user_addr, uint64_t avail_user_addr, uint64_t used_user_addr) "dev: %p vq: %p desc_user_addr: 0x%"PRIx64" avail_user_addr: 0x%"PRIx64" used_user_addr: 0x%"PRIx64 > >+vhost_vdpa_set_config_call(void *dev, int *fd)"dev: %p fd: %p" > >+ > > > > # virtio.c > > virtqueue_alloc_element(void *elem, size_t sz, unsigned in_num, unsigned out_num) "elem %p size %zd in_num %u out_num %u" > >diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c > >index 01d2101d09..cc1d39d663 100644 > >--- a/hw/virtio/vhost-vdpa.c > >+++ b/hw/virtio/vhost-vdpa.c > >@@ -467,20 +467,47 @@ static int vhost_vdpa_get_config(struct vhost_dev *dev, uint8_t *config, > > } > > return ret; > > } > >+static void vhost_vdpa_config_notify_start(struct vhost_dev *dev, > >+ struct VirtIODevice *vdev, bool start) > >+{ > >+ int fd, r; > >+ if (start) { > >+ fd = event_notifier_get_fd(&vdev->config_notifier); > >+ vdev->use_config_notifier = true; > >+ } else { > ^ > >+ fd = -1; > >+ vdev->use_config_notifier = false; > >+ } > ^ > >+ /*set the fd call back to vdpa driver*/ > ^ > It seems to me that there is an extra space in these places. > sure, I will fix this > >+ r = dev->vhost_ops->vhost_set_config_call(dev, &fd); > >+ if (r) { > >+ vdev->use_config_notifier = false; > >+ info_report("vhost_vdpa_config_notify not started!"); > >+ } > >+ /*active the config_notifier when vdev->use_config_notifier is true*/ > >+ if ((vdev->use_config_notifier) && (start)) { > >+ event_notifier_set(&vdev->config_notifier); > >+ } > >+ return; > > > >+} > > Here and also in other patches I would leave a new line between two > functions. > sure. will fix this > > static int vhost_vdpa_dev_start(struct vhost_dev *dev, bool started) > > { > > struct vhost_vdpa *v = dev->opaque; > > trace_vhost_vdpa_dev_start(dev, started); > >+ VirtIODevice *vdev = dev->vdev; > >+ > > if (started) { > > uint8_t status = 0; > > memory_listener_register(&v->listener, &address_space_memory); > > vhost_vdpa_set_vring_ready(dev); > > vhost_vdpa_add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK); > > vhost_vdpa_call(dev, VHOST_VDPA_GET_STATUS, &status); > >- > >+ /*set the configure interrupt call back*/ > >+ vhost_vdpa_config_notify_start(dev, vdev, true); > > return !(status & VIRTIO_CONFIG_S_DRIVER_OK); > > } else { > >+ vhost_vdpa_config_notify_start(dev, vdev, false); > > vhost_vdpa_reset_device(dev); > > vhost_vdpa_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE | > > VIRTIO_CONFIG_S_DRIVER); > >@@ -546,6 +573,13 @@ static int vhost_vdpa_set_vring_call(struct vhost_dev *dev, > > return vhost_vdpa_call(dev, VHOST_SET_VRING_CALL, file); > > } > > > >+static int vhost_vdpa_set_config_call(struct vhost_dev *dev, > >+ int *fd) > >+{ > >+ trace_vhost_vdpa_set_config_call(dev, fd); > >+ return vhost_vdpa_call(dev, VHOST_VDPA_SET_CONFIG_CALL, fd); > >+} > >+ > > static int vhost_vdpa_get_features(struct vhost_dev *dev, > > uint64_t *features) > > { > >@@ -611,4 +645,5 @@ const VhostOps vdpa_ops = { > > .vhost_get_device_id = vhost_vdpa_get_device_id, > > .vhost_vq_get_addr = vhost_vdpa_vq_get_addr, > > .vhost_force_iommu = vhost_vdpa_force_iommu, > >+ .vhost_set_config_call = vhost_vdpa_set_config_call, > > }; > >diff --git a/include/hw/virtio/vhost-backend.h b/include/hw/virtio/vhost-backend.h > >index 8a6f8e2a7a..1a2fee8994 100644 > >--- a/include/hw/virtio/vhost-backend.h > >+++ b/include/hw/virtio/vhost-backend.h > >@@ -125,6 +125,9 @@ typedef int (*vhost_get_device_id_op)(struct vhost_dev *dev, uint32_t *dev_id); > > > > typedef bool (*vhost_force_iommu_op)(struct vhost_dev *dev); > > > >+typedef int (*vhost_set_config_call_op)(struct vhost_dev *dev, > >+ int *fd); > ^ > One more space :-) > Thanks Stefano , will fix this > Thanks, > Stefano >
On 2021/1/26 下午3:42, Cindy Lu wrote: > Add call back function for configure interrupt. > Set the notifier's fd to the kernel driver when vdpa start. > also set -1 while vdpa stop. then the kernel will release > the related resource > > Signed-off-by: Cindy Lu <lulu@redhat.com> > --- > hw/virtio/trace-events | 2 ++ > hw/virtio/vhost-vdpa.c | 37 ++++++++++++++++++++++++++++++- > include/hw/virtio/vhost-backend.h | 4 ++++ > 3 files changed, 42 insertions(+), 1 deletion(-) > > diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events > index 2060a144a2..6710835b46 100644 > --- a/hw/virtio/trace-events > +++ b/hw/virtio/trace-events > @@ -52,6 +52,8 @@ vhost_vdpa_set_vring_call(void *dev, unsigned int index, int fd) "dev: %p index: > vhost_vdpa_get_features(void *dev, uint64_t features) "dev: %p features: 0x%"PRIx64 > vhost_vdpa_set_owner(void *dev) "dev: %p" > vhost_vdpa_vq_get_addr(void *dev, void *vq, uint64_t desc_user_addr, uint64_t avail_user_addr, uint64_t used_user_addr) "dev: %p vq: %p desc_user_addr: 0x%"PRIx64" avail_user_addr: 0x%"PRIx64" used_user_addr: 0x%"PRIx64 > +vhost_vdpa_set_config_call(void *dev, int *fd)"dev: %p fd: %p" > + > > # virtio.c > virtqueue_alloc_element(void *elem, size_t sz, unsigned in_num, unsigned out_num) "elem %p size %zd in_num %u out_num %u" > diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c > index 01d2101d09..cc1d39d663 100644 > --- a/hw/virtio/vhost-vdpa.c > +++ b/hw/virtio/vhost-vdpa.c > @@ -467,20 +467,47 @@ static int vhost_vdpa_get_config(struct vhost_dev *dev, uint8_t *config, > } > return ret; > } > +static void vhost_vdpa_config_notify_start(struct vhost_dev *dev, > + struct VirtIODevice *vdev, bool start) > +{ > + int fd, r; > + if (start) { > + fd = event_notifier_get_fd(&vdev->config_notifier); > + vdev->use_config_notifier = true; > + } else { > + fd = -1; > + vdev->use_config_notifier = false; > + } > + /*set the fd call back to vdpa driver*/ I guess checkpatch.pl might warn here. Please try to silent checkpath.pl before submitting patches. > + r = dev->vhost_ops->vhost_set_config_call(dev, &fd); > + if (r) { > + vdev->use_config_notifier = false; > + info_report("vhost_vdpa_config_notify not started!"); This looks kind of fragile. Do we need some workaround here like: 1) filter out the features that depends on config interrupt or 2) A timer to watch the change of config space Thanks > + } > + /*active the config_notifier when vdev->use_config_notifier is true*/ > + if ((vdev->use_config_notifier) && (start)) { > + event_notifier_set(&vdev->config_notifier); > + } > + return; > > +} > static int vhost_vdpa_dev_start(struct vhost_dev *dev, bool started) > { > struct vhost_vdpa *v = dev->opaque; > trace_vhost_vdpa_dev_start(dev, started); > + VirtIODevice *vdev = dev->vdev; > + > if (started) { > uint8_t status = 0; > memory_listener_register(&v->listener, &address_space_memory); > vhost_vdpa_set_vring_ready(dev); > vhost_vdpa_add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK); > vhost_vdpa_call(dev, VHOST_VDPA_GET_STATUS, &status); > - > + /*set the configure interrupt call back*/ > + vhost_vdpa_config_notify_start(dev, vdev, true); > return !(status & VIRTIO_CONFIG_S_DRIVER_OK); > } else { > + vhost_vdpa_config_notify_start(dev, vdev, false); > vhost_vdpa_reset_device(dev); > vhost_vdpa_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE | > VIRTIO_CONFIG_S_DRIVER); > @@ -546,6 +573,13 @@ static int vhost_vdpa_set_vring_call(struct vhost_dev *dev, > return vhost_vdpa_call(dev, VHOST_SET_VRING_CALL, file); > } > > +static int vhost_vdpa_set_config_call(struct vhost_dev *dev, > + int *fd) > +{ > + trace_vhost_vdpa_set_config_call(dev, fd); > + return vhost_vdpa_call(dev, VHOST_VDPA_SET_CONFIG_CALL, fd); > +} > + > static int vhost_vdpa_get_features(struct vhost_dev *dev, > uint64_t *features) > { > @@ -611,4 +645,5 @@ const VhostOps vdpa_ops = { > .vhost_get_device_id = vhost_vdpa_get_device_id, > .vhost_vq_get_addr = vhost_vdpa_vq_get_addr, > .vhost_force_iommu = vhost_vdpa_force_iommu, > + .vhost_set_config_call = vhost_vdpa_set_config_call, > }; > diff --git a/include/hw/virtio/vhost-backend.h b/include/hw/virtio/vhost-backend.h > index 8a6f8e2a7a..1a2fee8994 100644 > --- a/include/hw/virtio/vhost-backend.h > +++ b/include/hw/virtio/vhost-backend.h > @@ -125,6 +125,9 @@ typedef int (*vhost_get_device_id_op)(struct vhost_dev *dev, uint32_t *dev_id); > > typedef bool (*vhost_force_iommu_op)(struct vhost_dev *dev); > > +typedef int (*vhost_set_config_call_op)(struct vhost_dev *dev, > + int *fd); > + > typedef struct VhostOps { > VhostBackendType backend_type; > vhost_backend_init vhost_backend_init; > @@ -170,6 +173,7 @@ typedef struct VhostOps { > vhost_vq_get_addr_op vhost_vq_get_addr; > vhost_get_device_id_op vhost_get_device_id; > vhost_force_iommu_op vhost_force_iommu; > + vhost_set_config_call_op vhost_set_config_call; > } VhostOps; > > extern const VhostOps user_ops;
On Wed, Jan 27, 2021 at 1:47 PM Jason Wang <jasowang@redhat.com> wrote: > > > On 2021/1/26 下午3:42, Cindy Lu wrote: > > Add call back function for configure interrupt. > > Set the notifier's fd to the kernel driver when vdpa start. > > also set -1 while vdpa stop. then the kernel will release > > the related resource > > > > Signed-off-by: Cindy Lu <lulu@redhat.com> > > --- > > hw/virtio/trace-events | 2 ++ > > hw/virtio/vhost-vdpa.c | 37 ++++++++++++++++++++++++++++++- > > include/hw/virtio/vhost-backend.h | 4 ++++ > > 3 files changed, 42 insertions(+), 1 deletion(-) > > > > diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events > > index 2060a144a2..6710835b46 100644 > > --- a/hw/virtio/trace-events > > +++ b/hw/virtio/trace-events > > @@ -52,6 +52,8 @@ vhost_vdpa_set_vring_call(void *dev, unsigned int index, int fd) "dev: %p index: > > vhost_vdpa_get_features(void *dev, uint64_t features) "dev: %p features: 0x%"PRIx64 > > vhost_vdpa_set_owner(void *dev) "dev: %p" > > vhost_vdpa_vq_get_addr(void *dev, void *vq, uint64_t desc_user_addr, uint64_t avail_user_addr, uint64_t used_user_addr) "dev: %p vq: %p desc_user_addr: 0x%"PRIx64" avail_user_addr: 0x%"PRIx64" used_user_addr: 0x%"PRIx64 > > +vhost_vdpa_set_config_call(void *dev, int *fd)"dev: %p fd: %p" > > + > > > > # virtio.c > > virtqueue_alloc_element(void *elem, size_t sz, unsigned in_num, unsigned out_num) "elem %p size %zd in_num %u out_num %u" > > diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c > > index 01d2101d09..cc1d39d663 100644 > > --- a/hw/virtio/vhost-vdpa.c > > +++ b/hw/virtio/vhost-vdpa.c > > @@ -467,20 +467,47 @@ static int vhost_vdpa_get_config(struct vhost_dev *dev, uint8_t *config, > > } > > return ret; > > } > > +static void vhost_vdpa_config_notify_start(struct vhost_dev *dev, > > + struct VirtIODevice *vdev, bool start) > > +{ > > + int fd, r; > > + if (start) { > > + fd = event_notifier_get_fd(&vdev->config_notifier); > > + vdev->use_config_notifier = true; > > + } else { > > + fd = -1; > > + vdev->use_config_notifier = false; > > + } > > + /*set the fd call back to vdpa driver*/ > > > I guess checkpatch.pl might warn here. Please try to silent checkpath.pl > before submitting patches. > Actually I do have run this script, but seems not warned here. I will pay attention next time > > > + r = dev->vhost_ops->vhost_set_config_call(dev, &fd); > > + if (r) { > > + vdev->use_config_notifier = false; > > + info_report("vhost_vdpa_config_notify not started!"); > > > This looks kind of fragile. Do we need some workaround here like: > > 1) filter out the features that depends on config interrupt > > or > > 2) A timer to watch the change of config space > > Thanks > sure I will add this check > > > + } > > + /*active the config_notifier when vdev->use_config_notifier is true*/ > > + if ((vdev->use_config_notifier) && (start)) { > > + event_notifier_set(&vdev->config_notifier); > > + } > > + return; > > > > +} > > static int vhost_vdpa_dev_start(struct vhost_dev *dev, bool started) > > { > > struct vhost_vdpa *v = dev->opaque; > > trace_vhost_vdpa_dev_start(dev, started); > > + VirtIODevice *vdev = dev->vdev; > > + > > if (started) { > > uint8_t status = 0; > > memory_listener_register(&v->listener, &address_space_memory); > > vhost_vdpa_set_vring_ready(dev); > > vhost_vdpa_add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK); > > vhost_vdpa_call(dev, VHOST_VDPA_GET_STATUS, &status); > > - > > + /*set the configure interrupt call back*/ > > + vhost_vdpa_config_notify_start(dev, vdev, true); > > return !(status & VIRTIO_CONFIG_S_DRIVER_OK); > > } else { > > + vhost_vdpa_config_notify_start(dev, vdev, false); > > vhost_vdpa_reset_device(dev); > > vhost_vdpa_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE | > > VIRTIO_CONFIG_S_DRIVER); > > @@ -546,6 +573,13 @@ static int vhost_vdpa_set_vring_call(struct vhost_dev *dev, > > return vhost_vdpa_call(dev, VHOST_SET_VRING_CALL, file); > > } > > > > +static int vhost_vdpa_set_config_call(struct vhost_dev *dev, > > + int *fd) > > +{ > > + trace_vhost_vdpa_set_config_call(dev, fd); > > + return vhost_vdpa_call(dev, VHOST_VDPA_SET_CONFIG_CALL, fd); > > +} > > + > > static int vhost_vdpa_get_features(struct vhost_dev *dev, > > uint64_t *features) > > { > > @@ -611,4 +645,5 @@ const VhostOps vdpa_ops = { > > .vhost_get_device_id = vhost_vdpa_get_device_id, > > .vhost_vq_get_addr = vhost_vdpa_vq_get_addr, > > .vhost_force_iommu = vhost_vdpa_force_iommu, > > + .vhost_set_config_call = vhost_vdpa_set_config_call, > > }; > > diff --git a/include/hw/virtio/vhost-backend.h b/include/hw/virtio/vhost-backend.h > > index 8a6f8e2a7a..1a2fee8994 100644 > > --- a/include/hw/virtio/vhost-backend.h > > +++ b/include/hw/virtio/vhost-backend.h > > @@ -125,6 +125,9 @@ typedef int (*vhost_get_device_id_op)(struct vhost_dev *dev, uint32_t *dev_id); > > > > typedef bool (*vhost_force_iommu_op)(struct vhost_dev *dev); > > > > +typedef int (*vhost_set_config_call_op)(struct vhost_dev *dev, > > + int *fd); > > + > > typedef struct VhostOps { > > VhostBackendType backend_type; > > vhost_backend_init vhost_backend_init; > > @@ -170,6 +173,7 @@ typedef struct VhostOps { > > vhost_vq_get_addr_op vhost_vq_get_addr; > > vhost_get_device_id_op vhost_get_device_id; > > vhost_force_iommu_op vhost_force_iommu; > > + vhost_set_config_call_op vhost_set_config_call; > > } VhostOps; > > > > extern const VhostOps user_ops; >
On 2021/1/27 下午3:51, Cindy Lu wrote: >>> + /*set the fd call back to vdpa driver*/ >> I guess checkpatch.pl might warn here. Please try to silent checkpath.pl >> before submitting patches. >> > Actually I do have run this script, but seems not warned here. I will > pay attention next time Oh right, I remember kernel checkpath did the check but I don't know if the qemu one check the comment sytle. Thanks
diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events index 2060a144a2..6710835b46 100644 --- a/hw/virtio/trace-events +++ b/hw/virtio/trace-events @@ -52,6 +52,8 @@ vhost_vdpa_set_vring_call(void *dev, unsigned int index, int fd) "dev: %p index: vhost_vdpa_get_features(void *dev, uint64_t features) "dev: %p features: 0x%"PRIx64 vhost_vdpa_set_owner(void *dev) "dev: %p" vhost_vdpa_vq_get_addr(void *dev, void *vq, uint64_t desc_user_addr, uint64_t avail_user_addr, uint64_t used_user_addr) "dev: %p vq: %p desc_user_addr: 0x%"PRIx64" avail_user_addr: 0x%"PRIx64" used_user_addr: 0x%"PRIx64 +vhost_vdpa_set_config_call(void *dev, int *fd)"dev: %p fd: %p" + # virtio.c virtqueue_alloc_element(void *elem, size_t sz, unsigned in_num, unsigned out_num) "elem %p size %zd in_num %u out_num %u" diff --git a/hw/virtio/vhost-vdpa.c b/hw/virtio/vhost-vdpa.c index 01d2101d09..cc1d39d663 100644 --- a/hw/virtio/vhost-vdpa.c +++ b/hw/virtio/vhost-vdpa.c @@ -467,20 +467,47 @@ static int vhost_vdpa_get_config(struct vhost_dev *dev, uint8_t *config, } return ret; } +static void vhost_vdpa_config_notify_start(struct vhost_dev *dev, + struct VirtIODevice *vdev, bool start) +{ + int fd, r; + if (start) { + fd = event_notifier_get_fd(&vdev->config_notifier); + vdev->use_config_notifier = true; + } else { + fd = -1; + vdev->use_config_notifier = false; + } + /*set the fd call back to vdpa driver*/ + r = dev->vhost_ops->vhost_set_config_call(dev, &fd); + if (r) { + vdev->use_config_notifier = false; + info_report("vhost_vdpa_config_notify not started!"); + } + /*active the config_notifier when vdev->use_config_notifier is true*/ + if ((vdev->use_config_notifier) && (start)) { + event_notifier_set(&vdev->config_notifier); + } + return; +} static int vhost_vdpa_dev_start(struct vhost_dev *dev, bool started) { struct vhost_vdpa *v = dev->opaque; trace_vhost_vdpa_dev_start(dev, started); + VirtIODevice *vdev = dev->vdev; + if (started) { uint8_t status = 0; memory_listener_register(&v->listener, &address_space_memory); vhost_vdpa_set_vring_ready(dev); vhost_vdpa_add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK); vhost_vdpa_call(dev, VHOST_VDPA_GET_STATUS, &status); - + /*set the configure interrupt call back*/ + vhost_vdpa_config_notify_start(dev, vdev, true); return !(status & VIRTIO_CONFIG_S_DRIVER_OK); } else { + vhost_vdpa_config_notify_start(dev, vdev, false); vhost_vdpa_reset_device(dev); vhost_vdpa_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE | VIRTIO_CONFIG_S_DRIVER); @@ -546,6 +573,13 @@ static int vhost_vdpa_set_vring_call(struct vhost_dev *dev, return vhost_vdpa_call(dev, VHOST_SET_VRING_CALL, file); } +static int vhost_vdpa_set_config_call(struct vhost_dev *dev, + int *fd) +{ + trace_vhost_vdpa_set_config_call(dev, fd); + return vhost_vdpa_call(dev, VHOST_VDPA_SET_CONFIG_CALL, fd); +} + static int vhost_vdpa_get_features(struct vhost_dev *dev, uint64_t *features) { @@ -611,4 +645,5 @@ const VhostOps vdpa_ops = { .vhost_get_device_id = vhost_vdpa_get_device_id, .vhost_vq_get_addr = vhost_vdpa_vq_get_addr, .vhost_force_iommu = vhost_vdpa_force_iommu, + .vhost_set_config_call = vhost_vdpa_set_config_call, }; diff --git a/include/hw/virtio/vhost-backend.h b/include/hw/virtio/vhost-backend.h index 8a6f8e2a7a..1a2fee8994 100644 --- a/include/hw/virtio/vhost-backend.h +++ b/include/hw/virtio/vhost-backend.h @@ -125,6 +125,9 @@ typedef int (*vhost_get_device_id_op)(struct vhost_dev *dev, uint32_t *dev_id); typedef bool (*vhost_force_iommu_op)(struct vhost_dev *dev); +typedef int (*vhost_set_config_call_op)(struct vhost_dev *dev, + int *fd); + typedef struct VhostOps { VhostBackendType backend_type; vhost_backend_init vhost_backend_init; @@ -170,6 +173,7 @@ typedef struct VhostOps { vhost_vq_get_addr_op vhost_vq_get_addr; vhost_get_device_id_op vhost_get_device_id; vhost_force_iommu_op vhost_force_iommu; + vhost_set_config_call_op vhost_set_config_call; } VhostOps; extern const VhostOps user_ops;
Add call back function for configure interrupt. Set the notifier's fd to the kernel driver when vdpa start. also set -1 while vdpa stop. then the kernel will release the related resource Signed-off-by: Cindy Lu <lulu@redhat.com> --- hw/virtio/trace-events | 2 ++ hw/virtio/vhost-vdpa.c | 37 ++++++++++++++++++++++++++++++- include/hw/virtio/vhost-backend.h | 4 ++++ 3 files changed, 42 insertions(+), 1 deletion(-)