diff mbox series

[v2,13/18] hw/block/nvme: make sure ncqr and nsqr is valid

Message ID 20200703063420.2241014-14-its@irrelevant.dk
State New
Headers show
Series hw/block/nvme: bump to v1.3 | expand

Commit Message

Klaus Jensen July 3, 2020, 6:34 a.m. UTC 
From: Klaus Jensen <k.jensen@samsung.com>

0xffff is not an allowed value for NCQR and NSQR in Set Features on
Number of Queues.

Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
---
 hw/block/nvme.c | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/hw/block/nvme.c b/hw/block/nvme.c
index 9cff0f45dd7e..8230e0e3826b 100644
--- a/hw/block/nvme.c
+++ b/hw/block/nvme.c
@@ -1256,6 +1256,14 @@  static uint16_t nvme_set_feature(NvmeCtrl *n, NvmeCmd *cmd, NvmeRequest *req)
         blk_set_enable_write_cache(n->conf.blk, dw11 & 1);
         break;
     case NVME_NUMBER_OF_QUEUES:
+        /*
+         * NVMe v1.3, Section 5.21.1.7: 0xffff is not an allowed value for NCQR
+         * and NSQR.
+         */
+        if ((dw11 & 0xffff) == 0xffff || ((dw11 >> 16) & 0xffff) == 0xffff) {
+            return NVME_INVALID_FIELD | NVME_DNR;
+        }
+
         trace_pci_nvme_setfeat_numq((dw11 & 0xFFFF) + 1,
                                     ((dw11 >> 16) & 0xFFFF) + 1,
                                     n->params.max_ioqpairs,