| Message ID | 20200515222032.18838-9-walling@linux.ibm.com |
|---|---|
| State | New |
| Headers | show |
| Series | s390: Extended-Length SCCB & DIAGNOSE 0x318 | expand |
On Fri, 15 May 2020 18:20:32 -0400 Collin Walling <walling@linux.ibm.com> wrote: > DIAGNOSE 0x318 (diag 318) allows the storage of diagnostic data that > is collected by the firmware in the case of hardware/firmware service > events. > > The instruction is invoked in the Linux kernel and is handled, > migrated, and reset (modified clear and load normal) by QEMU. > KVM assists with the get/set of the relevent data via IOCTLs. > > This feature depends on the Extended-Length SCCB (els) feature. If > els is not present, then a warning will be printed and the SCLP bit > that allows the Linux kernel to execute the instruction will not be > set. > > Availability of this instruction is determined by byte 134 (aka fac134) > bit 0 of the SCLP Read Info block. This coincidentally expands into the > space used for CPU entries, which means VMs running with the diag 318 > capability may not be able to read information regarding all CPUs > unless the guest kernel supports an extended-length SCCB. > > This feature is not supported in protected virtualization mode. I think it should be easy enough to wire it up for !kvm as well (although I'm not sure how useful it would be there -- mostly for seeing what a guest does with it, I guess.) > > Signed-off-by: Collin Walling <walling@linux.ibm.com> > --- > hw/s390x/s390-virtio-ccw.c | 45 +++++++++++++++++++++++++++++ > hw/s390x/sclp.c | 5 ++++ > include/hw/s390x/s390-virtio-ccw.h | 1 + > include/hw/s390x/sclp.h | 3 ++ > target/s390x/cpu.c | 23 +++++++++++++++ > target/s390x/cpu.h | 4 +++ > target/s390x/cpu_features.h | 1 + > target/s390x/cpu_features_def.inc.h | 3 ++ > target/s390x/cpu_models.c | 1 + > target/s390x/gen-features.c | 1 + > target/s390x/kvm-stub.c | 10 +++++++ > target/s390x/kvm.c | 40 +++++++++++++++++++++++++ > target/s390x/kvm_s390x.h | 2 ++ > 13 files changed, 139 insertions(+) > (...) > diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c > index f2ccf0a06a..367a54c173 100644 > --- a/target/s390x/cpu.c > +++ b/target/s390x/cpu.c > @@ -446,6 +446,29 @@ void s390_enable_css_support(S390CPU *cpu) > kvm_s390_enable_css_support(cpu); > } > } > + > +void s390_get_diag_318_info(uint64_t *info) > +{ > + if (kvm_enabled()) { > + kvm_s390_get_diag_318_info(info); > + } > +} > + > +void s390_set_diag_318_info(uint64_t info) > +{ > + if (kvm_enabled()) { > + kvm_s390_set_diag_318_info(info); > + } > +} > + > +bool s390_diag_318_is_allowed(void) > +{ > + if (kvm_enabled()) { I would recommend not tying this explicitly to kvm -- assuming that the feature checks should be enough. > + return s390_has_feat(S390_FEAT_DIAG_318) && > + s390_has_feat(S390_FEAT_EXTENDED_LENGTH_SCCB); > + } > + return false; > +} > #endif > > static gchar *s390_gdb_arch_name(CPUState *cs) (...) > diff --git a/target/s390x/kvm.c b/target/s390x/kvm.c > index 380fb81822..5d7dc60c85 100644 > --- a/target/s390x/kvm.c > +++ b/target/s390x/kvm.c > @@ -105,6 +105,7 @@ > > #define DIAG_TIMEREVENT 0x288 > #define DIAG_IPL 0x308 > +#define DIAG_SET_CONTROL_PROGRAM_CODES 0x318 > #define DIAG_KVM_HYPERCALL 0x500 > #define DIAG_KVM_BREAKPOINT 0x501 > > @@ -814,6 +815,28 @@ int kvm_s390_set_clock_ext(uint8_t tod_high, uint64_t tod_low) > return kvm_vm_ioctl(kvm_state, KVM_SET_DEVICE_ATTR, &attr); > } > > +int kvm_s390_get_diag_318_info(uint64_t *info) > +{ > + struct kvm_device_attr attr = { > + .group = KVM_S390_VM_MISC, > + .attr = KVM_S390_VM_MISC_DIAG_318, > + .addr = (uint64_t)info, > + }; > + > + return kvm_vm_ioctl(kvm_state, KVM_GET_DEVICE_ATTR, &attr); > +} > + > +int kvm_s390_set_diag_318_info(uint64_t info) > +{ > + struct kvm_device_attr attr = { > + .group = KVM_S390_VM_MISC, > + .attr = KVM_S390_VM_MISC_DIAG_318, > + .addr = (uint64_t)&info, > + }; > + > + return kvm_vm_ioctl(kvm_state, KVM_SET_DEVICE_ATTR, &attr); > +} > + > /** > * kvm_s390_mem_op: > * @addr: the logical start address in guest memory > @@ -1601,6 +1624,14 @@ static int handle_sw_breakpoint(S390CPU *cpu, struct kvm_run *run) > return -ENOENT; > } > > +static void kvm_handle_diag_318(struct kvm_run *run) > +{ > + uint64_t reg = (run->s390_sieic.ipa & 0x00f0) >> 4; > + uint64_t info = run->s.regs.gprs[reg]; > + > + kvm_s390_set_diag_318_info(info); Follow the other diag handlers and rather call a common handle_diag_318() function, which will in turn call s390_set_diag_318_info()? While that feels like a bit of extra churn at a glance, it allows non-kvm access to this diag more easily. > +} > + > #define DIAG_KVM_CODE_MASK 0x000000000000ffff > > static int handle_diag(S390CPU *cpu, struct kvm_run *run, uint32_t ipb) > @@ -1620,6 +1651,9 @@ static int handle_diag(S390CPU *cpu, struct kvm_run *run, uint32_t ipb) > case DIAG_IPL: > kvm_handle_diag_308(cpu, run); > break; > + case DIAG_SET_CONTROL_PROGRAM_CODES: > + kvm_handle_diag_318(run); > + break; > case DIAG_KVM_HYPERCALL: > r = handle_hypercall(cpu, run); > break; > @@ -2460,6 +2494,12 @@ void kvm_s390_get_host_cpu_model(S390CPUModel *model, Error **errp) > /* Extended-Length SCCB is handled entirely within QEMU */ > set_bit(S390_FEAT_EXTENDED_LENGTH_SCCB, model->features); > > + /* Allow diag 0x318 iff KVM supported and not in PV mode */ "iff supported by KVM" ? > + if (!s390_is_pv() && kvm_vm_check_attr(kvm_state, > + KVM_S390_VM_MISC, KVM_S390_VM_MISC_DIAG_318)) { > + set_bit(S390_FEAT_DIAG_318, model->features); > + } > + > /* strip of features that are not part of the maximum model */ > bitmap_and(model->features, model->features, model->def->full_feat, > S390_FEAT_MAX); (...)
On 5/20/20 7:30 AM, Cornelia Huck wrote: > On Fri, 15 May 2020 18:20:32 -0400 > Collin Walling <walling@linux.ibm.com> wrote: > >> DIAGNOSE 0x318 (diag 318) allows the storage of diagnostic data that >> is collected by the firmware in the case of hardware/firmware service >> events. >> >> The instruction is invoked in the Linux kernel and is handled, >> migrated, and reset (modified clear and load normal) by QEMU. >> KVM assists with the get/set of the relevent data via IOCTLs. >> >> This feature depends on the Extended-Length SCCB (els) feature. If >> els is not present, then a warning will be printed and the SCLP bit >> that allows the Linux kernel to execute the instruction will not be >> set. >> >> Availability of this instruction is determined by byte 134 (aka fac134) >> bit 0 of the SCLP Read Info block. This coincidentally expands into the >> space used for CPU entries, which means VMs running with the diag 318 >> capability may not be able to read information regarding all CPUs >> unless the guest kernel supports an extended-length SCCB. >> >> This feature is not supported in protected virtualization mode. > > I think it should be easy enough to wire it up for !kvm as well > (although I'm not sure how useful it would be there -- mostly for > seeing what a guest does with it, I guess.) > I suppose we could. I'm working with the sync_regs idea that was mentioned, and if it works the way I think it does, a lot the code on the QEMU side will be disappearing. Otherwise, I'll look into this. It should be rather harmless if QEMU holds onto the data, but doesn't do anything with it. >> >> Signed-off-by: Collin Walling <walling@linux.ibm.com> >> --- >> hw/s390x/s390-virtio-ccw.c | 45 +++++++++++++++++++++++++++++ >> hw/s390x/sclp.c | 5 ++++ >> include/hw/s390x/s390-virtio-ccw.h | 1 + >> include/hw/s390x/sclp.h | 3 ++ >> target/s390x/cpu.c | 23 +++++++++++++++ >> target/s390x/cpu.h | 4 +++ >> target/s390x/cpu_features.h | 1 + >> target/s390x/cpu_features_def.inc.h | 3 ++ >> target/s390x/cpu_models.c | 1 + >> target/s390x/gen-features.c | 1 + >> target/s390x/kvm-stub.c | 10 +++++++ >> target/s390x/kvm.c | 40 +++++++++++++++++++++++++ >> target/s390x/kvm_s390x.h | 2 ++ >> 13 files changed, 139 insertions(+) >> > > (...) > >> diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c >> index f2ccf0a06a..367a54c173 100644 >> --- a/target/s390x/cpu.c >> +++ b/target/s390x/cpu.c >> @@ -446,6 +446,29 @@ void s390_enable_css_support(S390CPU *cpu) >> kvm_s390_enable_css_support(cpu); >> } >> } >> + >> +void s390_get_diag_318_info(uint64_t *info) >> +{ >> + if (kvm_enabled()) { >> + kvm_s390_get_diag_318_info(info); >> + } >> +} >> + >> +void s390_set_diag_318_info(uint64_t info) >> +{ >> + if (kvm_enabled()) { >> + kvm_s390_set_diag_318_info(info); >> + } >> +} >> + >> +bool s390_diag_318_is_allowed(void) >> +{ >> + if (kvm_enabled()) { > > I would recommend not tying this explicitly to kvm -- assuming that the > feature checks should be enough. > True. If I understand how the sync_regs approach works, then vmstate stuff should be going away, and the reset code will also be handled in KVM. Otherwise, I'll make the change. >> + return s390_has_feat(S390_FEAT_DIAG_318) && >> + s390_has_feat(S390_FEAT_EXTENDED_LENGTH_SCCB); >> + } >> + return false; >> +} >> #endif >> >> static gchar *s390_gdb_arch_name(CPUState *cs) > > (...) > >> diff --git a/target/s390x/kvm.c b/target/s390x/kvm.c >> index 380fb81822..5d7dc60c85 100644 >> --- a/target/s390x/kvm.c >> +++ b/target/s390x/kvm.c >> @@ -105,6 +105,7 @@ >> >> #define DIAG_TIMEREVENT 0x288 >> #define DIAG_IPL 0x308 >> +#define DIAG_SET_CONTROL_PROGRAM_CODES 0x318 >> #define DIAG_KVM_HYPERCALL 0x500 >> #define DIAG_KVM_BREAKPOINT 0x501 >> >> @@ -814,6 +815,28 @@ int kvm_s390_set_clock_ext(uint8_t tod_high, uint64_t tod_low) >> return kvm_vm_ioctl(kvm_state, KVM_SET_DEVICE_ATTR, &attr); >> } >> >> +int kvm_s390_get_diag_318_info(uint64_t *info) >> +{ >> + struct kvm_device_attr attr = { >> + .group = KVM_S390_VM_MISC, >> + .attr = KVM_S390_VM_MISC_DIAG_318, >> + .addr = (uint64_t)info, >> + }; >> + >> + return kvm_vm_ioctl(kvm_state, KVM_GET_DEVICE_ATTR, &attr); >> +} >> + >> +int kvm_s390_set_diag_318_info(uint64_t info) >> +{ >> + struct kvm_device_attr attr = { >> + .group = KVM_S390_VM_MISC, >> + .attr = KVM_S390_VM_MISC_DIAG_318, >> + .addr = (uint64_t)&info, >> + }; >> + >> + return kvm_vm_ioctl(kvm_state, KVM_SET_DEVICE_ATTR, &attr); >> +} >> + >> /** >> * kvm_s390_mem_op: >> * @addr: the logical start address in guest memory >> @@ -1601,6 +1624,14 @@ static int handle_sw_breakpoint(S390CPU *cpu, struct kvm_run *run) >> return -ENOENT; >> } >> >> +static void kvm_handle_diag_318(struct kvm_run *run) >> +{ >> + uint64_t reg = (run->s390_sieic.ipa & 0x00f0) >> 4; >> + uint64_t info = run->s.regs.gprs[reg]; >> + >> + kvm_s390_set_diag_318_info(info); > > Follow the other diag handlers and rather call a common > handle_diag_318() function, which will in turn call > s390_set_diag_318_info()? While that feels like a bit of extra churn at > a glance, it allows non-kvm access to this diag more easily. > Can do. >> +} >> + >> #define DIAG_KVM_CODE_MASK 0x000000000000ffff >> >> static int handle_diag(S390CPU *cpu, struct kvm_run *run, uint32_t ipb) >> @@ -1620,6 +1651,9 @@ static int handle_diag(S390CPU *cpu, struct kvm_run *run, uint32_t ipb) >> case DIAG_IPL: >> kvm_handle_diag_308(cpu, run); >> break; >> + case DIAG_SET_CONTROL_PROGRAM_CODES: >> + kvm_handle_diag_318(run); >> + break; >> case DIAG_KVM_HYPERCALL: >> r = handle_hypercall(cpu, run); >> break; >> @@ -2460,6 +2494,12 @@ void kvm_s390_get_host_cpu_model(S390CPUModel *model, Error **errp) >> /* Extended-Length SCCB is handled entirely within QEMU */ >> set_bit(S390_FEAT_EXTENDED_LENGTH_SCCB, model->features); >> >> + /* Allow diag 0x318 iff KVM supported and not in PV mode */ > > "iff supported by KVM" ? > That sounds a bit better :) >> + if (!s390_is_pv() && kvm_vm_check_attr(kvm_state, >> + KVM_S390_VM_MISC, KVM_S390_VM_MISC_DIAG_318)) { >> + set_bit(S390_FEAT_DIAG_318, model->features); >> + } >> + >> /* strip of features that are not part of the maximum model */ >> bitmap_and(model->features, model->features, model->def->full_feat, >> S390_FEAT_MAX); > > (...) > > Thanks for the review!
diff --git a/hw/s390x/s390-virtio-ccw.c b/hw/s390x/s390-virtio-ccw.c index 45292fb5a8..9cc5f4cede 100644 --- a/hw/s390x/s390-virtio-ccw.c +++ b/hw/s390x/s390-virtio-ccw.c @@ -242,6 +242,40 @@ static void s390_create_sclpconsole(const char *type, Chardev *chardev) qdev_init_nofail(dev); } +static int diag_318_post_load(void *opaque, int version_id) +{ + S390CcwMachineState *d = opaque; + + s390_set_diag_318_info(d->diag_318_info); + return 0; +} + +static int diag_318_pre_save(void *opaque) +{ + S390CcwMachineState *d = opaque; + + s390_get_diag_318_info(&d->diag_318_info); + return 0; +} + +static bool diag_318_needed(void *opaque) +{ + return s390_diag_318_is_allowed(); +} + +const VMStateDescription vmstate_diag_318 = { + .name = "vmstate_diag_318", + .post_load = diag_318_post_load, + .pre_save = diag_318_pre_save, + .version_id = 1, + .minimum_version_id = 1, + .needed = diag_318_needed, + .fields = (VMStateField[]) { + VMSTATE_UINT64(diag_318_info, S390CcwMachineState), + VMSTATE_END_OF_LIST() + } +}; + static void ccw_init(MachineState *machine) { int ret; @@ -299,6 +333,8 @@ static void ccw_init(MachineState *machine) /* init the TOD clock */ s390_init_tod(); + + vmstate_register(NULL, 0, &vmstate_diag_318, machine); } static void s390_cpu_plug(HotplugHandler *hotplug_dev, @@ -404,6 +440,13 @@ static void s390_pv_prepare_reset(S390CcwMachineState *ms) s390_pv_perf_clear_reset(); } +static void s390_diag_318_reset(void) +{ + if (s390_diag_318_is_allowed()) { + s390_set_diag_318_info(0); + } +} + static void s390_machine_reset(MachineState *machine) { S390CcwMachineState *ms = S390_CCW_MACHINE(machine); @@ -440,6 +483,7 @@ static void s390_machine_reset(MachineState *machine) subsystem_reset(); s390_crypto_reset(); s390_pv_prepare_reset(ms); + s390_diag_318_reset(); CPU_FOREACH(t) { run_on_cpu(t, s390_do_cpu_full_reset, RUN_ON_CPU_NULL); } @@ -452,6 +496,7 @@ static void s390_machine_reset(MachineState *machine) */ subsystem_reset(); s390_pv_prepare_reset(ms); + s390_diag_318_reset(); CPU_FOREACH(t) { if (t == cs) { continue; diff --git a/hw/s390x/sclp.c b/hw/s390x/sclp.c index bde4c5420e..b55fa955c8 100644 --- a/hw/s390x/sclp.c +++ b/hw/s390x/sclp.c @@ -152,6 +152,11 @@ static void read_SCP_info(SCLPDevice *sclp, SCCB *sccb) s390_get_feat_block(S390_FEAT_TYPE_SCLP_CONF_CHAR_EXT, read_info->conf_char_ext); + if (s390_has_feat(S390_FEAT_EXTENDED_LENGTH_SCCB)) { + s390_get_feat_block(S390_FEAT_TYPE_SCLP_FAC134, + &read_info->fac134); + } + read_info->facilities = cpu_to_be64(SCLP_HAS_CPU_INFO | SCLP_HAS_IOA_RECONFIG); diff --git a/include/hw/s390x/s390-virtio-ccw.h b/include/hw/s390x/s390-virtio-ccw.h index cd1dccc6e3..c9bf7b7096 100644 --- a/include/hw/s390x/s390-virtio-ccw.h +++ b/include/hw/s390x/s390-virtio-ccw.h @@ -30,6 +30,7 @@ typedef struct S390CcwMachineState { bool dea_key_wrap; bool pv; uint8_t loadparm[8]; + uint64_t diag_318_info; } S390CcwMachineState; typedef struct S390CcwMachineClass { diff --git a/include/hw/s390x/sclp.h b/include/hw/s390x/sclp.h index ef2d63eae9..ccb9f0a676 100644 --- a/include/hw/s390x/sclp.h +++ b/include/hw/s390x/sclp.h @@ -133,6 +133,9 @@ typedef struct ReadInfo { uint16_t highest_cpu; uint8_t _reserved5[124 - 122]; /* 122-123 */ uint32_t hmfai; + uint8_t _reserved7[134 - 128]; /* 128-133 */ + uint8_t fac134; + uint8_t _reserved8[144 - 135]; /* 135-143 */ struct CPUEntry entries[]; } QEMU_PACKED ReadInfo; diff --git a/target/s390x/cpu.c b/target/s390x/cpu.c index f2ccf0a06a..367a54c173 100644 --- a/target/s390x/cpu.c +++ b/target/s390x/cpu.c @@ -446,6 +446,29 @@ void s390_enable_css_support(S390CPU *cpu) kvm_s390_enable_css_support(cpu); } } + +void s390_get_diag_318_info(uint64_t *info) +{ + if (kvm_enabled()) { + kvm_s390_get_diag_318_info(info); + } +} + +void s390_set_diag_318_info(uint64_t info) +{ + if (kvm_enabled()) { + kvm_s390_set_diag_318_info(info); + } +} + +bool s390_diag_318_is_allowed(void) +{ + if (kvm_enabled()) { + return s390_has_feat(S390_FEAT_DIAG_318) && + s390_has_feat(S390_FEAT_EXTENDED_LENGTH_SCCB); + } + return false; +} #endif static gchar *s390_gdb_arch_name(CPUState *cs) diff --git a/target/s390x/cpu.h b/target/s390x/cpu.h index 035427521c..205738999e 100644 --- a/target/s390x/cpu.h +++ b/target/s390x/cpu.h @@ -769,6 +769,10 @@ void s390_cmma_reset(void); void s390_enable_css_support(S390CPU *cpu); int s390_assign_subch_ioeventfd(EventNotifier *notifier, uint32_t sch_id, int vq, bool assign); +void s390_get_diag_318_info(uint64_t *info); +void s390_set_diag_318_info(uint64_t info); +bool s390_diag_318_is_allowed(void); + #ifndef CONFIG_USER_ONLY unsigned int s390_cpu_set_state(uint8_t cpu_state, S390CPU *cpu); #else diff --git a/target/s390x/cpu_features.h b/target/s390x/cpu_features.h index da695a8346..f74f7fc3a1 100644 --- a/target/s390x/cpu_features.h +++ b/target/s390x/cpu_features.h @@ -23,6 +23,7 @@ typedef enum { S390_FEAT_TYPE_STFL, S390_FEAT_TYPE_SCLP_CONF_CHAR, S390_FEAT_TYPE_SCLP_CONF_CHAR_EXT, + S390_FEAT_TYPE_SCLP_FAC134, S390_FEAT_TYPE_SCLP_CPU, S390_FEAT_TYPE_MISC, S390_FEAT_TYPE_PLO, diff --git a/target/s390x/cpu_features_def.inc.h b/target/s390x/cpu_features_def.inc.h index 3548d65a69..8c5bbfa0ea 100644 --- a/target/s390x/cpu_features_def.inc.h +++ b/target/s390x/cpu_features_def.inc.h @@ -122,6 +122,9 @@ DEF_FEAT(SIE_CMMA, "cmma", SCLP_CONF_CHAR_EXT, 1, "SIE: Collaborative-memory-man DEF_FEAT(SIE_PFMFI, "pfmfi", SCLP_CONF_CHAR_EXT, 9, "SIE: PFMF interpretation facility") DEF_FEAT(SIE_IBS, "ibs", SCLP_CONF_CHAR_EXT, 10, "SIE: Interlock-and-broadcast-suppression facility") +/* Features exposed via SCLP SCCB Facilities byte 134 (bit numbers relative to byte-134) */ +DEF_FEAT(DIAG_318, "diag_318", SCLP_FAC134, 0, "Control program name and version codes") + /* Features exposed via SCLP CPU info. */ DEF_FEAT(SIE_F2, "sief2", SCLP_CPU, 4, "SIE: interception format 2 (Virtual SIE)") DEF_FEAT(SIE_SKEY, "skey", SCLP_CPU, 5, "SIE: Storage-key facility") diff --git a/target/s390x/cpu_models.c b/target/s390x/cpu_models.c index 7c32180269..1d8fc76f7b 100644 --- a/target/s390x/cpu_models.c +++ b/target/s390x/cpu_models.c @@ -827,6 +827,7 @@ static void check_consistency(const S390CPUModel *model) { S390_FEAT_PTFF_STOE, S390_FEAT_MULTIPLE_EPOCH }, { S390_FEAT_PTFF_STOUE, S390_FEAT_MULTIPLE_EPOCH }, { S390_FEAT_AP_QUEUE_INTERRUPT_CONTROL, S390_FEAT_AP }, + { S390_FEAT_DIAG_318, S390_FEAT_EXTENDED_LENGTH_SCCB }, }; int i; diff --git a/target/s390x/gen-features.c b/target/s390x/gen-features.c index 6857f657fb..a1f0a6f3c6 100644 --- a/target/s390x/gen-features.c +++ b/target/s390x/gen-features.c @@ -523,6 +523,7 @@ static uint16_t full_GEN12_GA1[] = { S390_FEAT_AP_FACILITIES_TEST, S390_FEAT_AP, S390_FEAT_EXTENDED_LENGTH_SCCB, + S390_FEAT_DIAG_318, }; static uint16_t full_GEN12_GA2[] = { diff --git a/target/s390x/kvm-stub.c b/target/s390x/kvm-stub.c index aa185017a2..bb5c0d770a 100644 --- a/target/s390x/kvm-stub.c +++ b/target/s390x/kvm-stub.c @@ -120,3 +120,13 @@ void kvm_s390_stop_interrupt(S390CPU *cpu) void kvm_s390_restart_interrupt(S390CPU *cpu) { } + +int kvm_s390_get_diag_318_info(uint64_t *info) +{ + return 0; +} + +int kvm_s390_set_diag_318_info(uint64_t info) +{ + return 0; +} diff --git a/target/s390x/kvm.c b/target/s390x/kvm.c index 380fb81822..5d7dc60c85 100644 --- a/target/s390x/kvm.c +++ b/target/s390x/kvm.c @@ -105,6 +105,7 @@ #define DIAG_TIMEREVENT 0x288 #define DIAG_IPL 0x308 +#define DIAG_SET_CONTROL_PROGRAM_CODES 0x318 #define DIAG_KVM_HYPERCALL 0x500 #define DIAG_KVM_BREAKPOINT 0x501 @@ -814,6 +815,28 @@ int kvm_s390_set_clock_ext(uint8_t tod_high, uint64_t tod_low) return kvm_vm_ioctl(kvm_state, KVM_SET_DEVICE_ATTR, &attr); } +int kvm_s390_get_diag_318_info(uint64_t *info) +{ + struct kvm_device_attr attr = { + .group = KVM_S390_VM_MISC, + .attr = KVM_S390_VM_MISC_DIAG_318, + .addr = (uint64_t)info, + }; + + return kvm_vm_ioctl(kvm_state, KVM_GET_DEVICE_ATTR, &attr); +} + +int kvm_s390_set_diag_318_info(uint64_t info) +{ + struct kvm_device_attr attr = { + .group = KVM_S390_VM_MISC, + .attr = KVM_S390_VM_MISC_DIAG_318, + .addr = (uint64_t)&info, + }; + + return kvm_vm_ioctl(kvm_state, KVM_SET_DEVICE_ATTR, &attr); +} + /** * kvm_s390_mem_op: * @addr: the logical start address in guest memory @@ -1601,6 +1624,14 @@ static int handle_sw_breakpoint(S390CPU *cpu, struct kvm_run *run) return -ENOENT; } +static void kvm_handle_diag_318(struct kvm_run *run) +{ + uint64_t reg = (run->s390_sieic.ipa & 0x00f0) >> 4; + uint64_t info = run->s.regs.gprs[reg]; + + kvm_s390_set_diag_318_info(info); +} + #define DIAG_KVM_CODE_MASK 0x000000000000ffff static int handle_diag(S390CPU *cpu, struct kvm_run *run, uint32_t ipb) @@ -1620,6 +1651,9 @@ static int handle_diag(S390CPU *cpu, struct kvm_run *run, uint32_t ipb) case DIAG_IPL: kvm_handle_diag_308(cpu, run); break; + case DIAG_SET_CONTROL_PROGRAM_CODES: + kvm_handle_diag_318(run); + break; case DIAG_KVM_HYPERCALL: r = handle_hypercall(cpu, run); break; @@ -2460,6 +2494,12 @@ void kvm_s390_get_host_cpu_model(S390CPUModel *model, Error **errp) /* Extended-Length SCCB is handled entirely within QEMU */ set_bit(S390_FEAT_EXTENDED_LENGTH_SCCB, model->features); + /* Allow diag 0x318 iff KVM supported and not in PV mode */ + if (!s390_is_pv() && kvm_vm_check_attr(kvm_state, + KVM_S390_VM_MISC, KVM_S390_VM_MISC_DIAG_318)) { + set_bit(S390_FEAT_DIAG_318, model->features); + } + /* strip of features that are not part of the maximum model */ bitmap_and(model->features, model->features, model->def->full_feat, S390_FEAT_MAX); diff --git a/target/s390x/kvm_s390x.h b/target/s390x/kvm_s390x.h index 6ab17c81b7..a9123b3821 100644 --- a/target/s390x/kvm_s390x.h +++ b/target/s390x/kvm_s390x.h @@ -32,6 +32,8 @@ int kvm_s390_get_clock(uint8_t *tod_high, uint64_t *tod_clock); int kvm_s390_get_clock_ext(uint8_t *tod_high, uint64_t *tod_clock); int kvm_s390_set_clock(uint8_t tod_high, uint64_t tod_clock); int kvm_s390_set_clock_ext(uint8_t tod_high, uint64_t tod_clock); +int kvm_s390_get_diag_318_info(uint64_t *info); +int kvm_s390_set_diag_318_info(uint64_t info); void kvm_s390_enable_css_support(S390CPU *cpu); int kvm_s390_assign_subch_ioeventfd(EventNotifier *notifier, uint32_t sch, int vq, bool assign);
DIAGNOSE 0x318 (diag 318) allows the storage of diagnostic data that is collected by the firmware in the case of hardware/firmware service events. The instruction is invoked in the Linux kernel and is handled, migrated, and reset (modified clear and load normal) by QEMU. KVM assists with the get/set of the relevent data via IOCTLs. This feature depends on the Extended-Length SCCB (els) feature. If els is not present, then a warning will be printed and the SCLP bit that allows the Linux kernel to execute the instruction will not be set. Availability of this instruction is determined by byte 134 (aka fac134) bit 0 of the SCLP Read Info block. This coincidentally expands into the space used for CPU entries, which means VMs running with the diag 318 capability may not be able to read information regarding all CPUs unless the guest kernel supports an extended-length SCCB. This feature is not supported in protected virtualization mode. Signed-off-by: Collin Walling <walling@linux.ibm.com> --- hw/s390x/s390-virtio-ccw.c | 45 +++++++++++++++++++++++++++++ hw/s390x/sclp.c | 5 ++++ include/hw/s390x/s390-virtio-ccw.h | 1 + include/hw/s390x/sclp.h | 3 ++ target/s390x/cpu.c | 23 +++++++++++++++ target/s390x/cpu.h | 4 +++ target/s390x/cpu_features.h | 1 + target/s390x/cpu_features_def.inc.h | 3 ++ target/s390x/cpu_models.c | 1 + target/s390x/gen-features.c | 1 + target/s390x/kvm-stub.c | 10 +++++++ target/s390x/kvm.c | 40 +++++++++++++++++++++++++ target/s390x/kvm_s390x.h | 2 ++ 13 files changed, 139 insertions(+)