@@ -22,6 +22,7 @@
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "hw/arm/fsl-imx6.h"
+#include "hw/usb/imx-usb-phy.h"
#include "hw/boards.h"
#include "hw/qdev-properties.h"
#include "sysemu/sysemu.h"
@@ -86,6 +87,17 @@ static void fsl_imx6_init(Object *obj)
TYPE_IMX_USDHC);
}
+ for (i = 0; i < FSL_IMX6_NUM_USB_PHYS; i++) {
+ snprintf(name, NAME_SIZE, "usbphy%d", i);
+ sysbus_init_child_obj(obj, name, &s->usbphy[i], sizeof(s->usbphy[i]),
+ TYPE_IMX_USBPHY);
+ }
+ for (i = 0; i < FSL_IMX6_NUM_USBS; i++) {
+ snprintf(name, NAME_SIZE, "usb%d", i);
+ sysbus_init_child_obj(obj, name, &s->usb[i], sizeof(s->usb[i]),
+ TYPE_CHIPIDEA);
+ }
+
for (i = 0; i < FSL_IMX6_NUM_ECSPIS; i++) {
snprintf(name, NAME_SIZE, "spi%d", i + 1);
sysbus_init_child_obj(obj, name, &s->spi[i], sizeof(s->spi[i]),
@@ -349,6 +361,30 @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp)
esdhc_table[i].irq));
}
+ /* USB */
+ for (i = 0; i < FSL_IMX6_NUM_USB_PHYS; i++) {
+ object_property_set_bool(OBJECT(&s->usbphy[i]), true, "realized",
+ &error_abort);
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->usbphy[i]), 0,
+ FSL_IMX6_USBPHY1_ADDR + i * 0x1000);
+ }
+ for (i = 0; i < FSL_IMX6_NUM_USBS; i++) {
+ static const int FSL_IMX6_USBn_IRQ[] = {
+ FSL_IMX6_USB_OTG_IRQ,
+ FSL_IMX6_USB_HOST1_IRQ,
+ FSL_IMX6_USB_HOST2_IRQ,
+ FSL_IMX6_USB_HOST3_IRQ,
+ };
+
+ object_property_set_bool(OBJECT(&s->usb[i]), true, "realized",
+ &error_abort);
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0,
+ FSL_IMX6_USBOH3_USB_ADDR + i * 0x200);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i]), 0,
+ qdev_get_gpio_in(DEVICE(&s->a9mpcore),
+ FSL_IMX6_USBn_IRQ[i]));
+ }
+
/* Initialize all ECSPI */
for (i = 0; i < FSL_IMX6_NUM_ECSPIS; i++) {
static const struct {
@@ -30,6 +30,8 @@
#include "hw/sd/sdhci.h"
#include "hw/ssi/imx_spi.h"
#include "hw/net/imx_fec.h"
+#include "hw/usb/chipidea.h"
+#include "hw/usb/imx-usb-phy.h"
#include "exec/memory.h"
#include "cpu.h"
@@ -44,6 +46,8 @@
#define FSL_IMX6_NUM_ESDHCS 4
#define FSL_IMX6_NUM_ECSPIS 5
#define FSL_IMX6_NUM_WDTS 2
+#define FSL_IMX6_NUM_USB_PHYS 2
+#define FSL_IMX6_NUM_USBS 4
typedef struct FslIMX6State {
/*< private >*/
@@ -62,6 +66,8 @@ typedef struct FslIMX6State {
SDHCIState esdhc[FSL_IMX6_NUM_ESDHCS];
IMXSPIState spi[FSL_IMX6_NUM_ECSPIS];
IMX2WdtState wdt[FSL_IMX6_NUM_WDTS];
+ IMXUSBPHYState usbphy[FSL_IMX6_NUM_USB_PHYS];
+ ChipideaState usb[FSL_IMX6_NUM_USBS];
IMXFECState eth;
MemoryRegion rom;
MemoryRegion caam;
With this patch, the USB controllers on 'sabrelite' are detected and can be used to boot the system. Signed-off-by: Guenter Roeck <linux@roeck-us.net> --- v3: Wire up USB and USB PHY controllers separately. The number of USB controllers does not match the number of USB PHYs, and they are logically different. v2: Use USB PHY emulation hw/arm/fsl-imx6.c | 36 ++++++++++++++++++++++++++++++++++++ include/hw/arm/fsl-imx6.h | 6 ++++++ 2 files changed, 42 insertions(+)