Message ID | 20171019163546.2039-8-clg@kaod.org |
---|---|
State | New |
Headers | show |
Series | aspeed: add a witherspoon-bmc machine | expand |
Hi Cédric, On 10/19/2017 01:35 PM, Cédric Le Goater wrote: > Specs are available here : > > https://www.nxp.com/docs/en/application-note/AN264.pdf > > This is a simple model supporting the basic registers for led and GPIO > mode. The device also supports two blinking rates but not the model > yet. > > Signed-off-by: Cédric Le Goater <clg@kaod.org> > Reviewed-by: Peter Maydell <peter.maydell@linaro.org> > --- > > Changes since v3: > > - introduced auto-increment support > - removed the buffer collecting bytes on the bus > - improved reset > - used extract32 > - added a unit test > > Changes since v2: > > - removed comments on the I2C buffer size, but kept the array. I did > not want to rewrite the buffer handling > > default-configs/arm-softmmu.mak | 1 + > hw/misc/Makefile.objs | 1 + > hw/misc/pca9552.c | 259 ++++++++++++++++++++++++++++++++++++++++ > include/hw/misc/pca9552.h | 33 +++++ If you mind using scripts/git.orderfile the review'd get easier :) > tests/Makefile.include | 2 + > tests/pca9552-test.c | 131 ++++++++++++++++++++ > 6 files changed, 427 insertions(+) > create mode 100644 hw/misc/pca9552.c > create mode 100644 include/hw/misc/pca9552.h > create mode 100644 tests/pca9552-test.c > > diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak > index 5059d134c816..d868d1095a6c 100644 > --- a/default-configs/arm-softmmu.mak > +++ b/default-configs/arm-softmmu.mak > @@ -16,6 +16,7 @@ CONFIG_TSC2005=y > CONFIG_LM832X=y > CONFIG_TMP105=y > CONFIG_TMP421=y > +CONFIG_PCA9552=y > CONFIG_STELLARIS=y > CONFIG_STELLARIS_INPUT=y > CONFIG_STELLARIS_ENET=y > diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs > index e8f0a02f35af..e4e22880dbbc 100644 > --- a/hw/misc/Makefile.objs > +++ b/hw/misc/Makefile.objs > @@ -7,6 +7,7 @@ common-obj-$(CONFIG_SGA) += sga.o > common-obj-$(CONFIG_ISA_TESTDEV) += pc-testdev.o > common-obj-$(CONFIG_PCI_TESTDEV) += pci-testdev.o > common-obj-$(CONFIG_EDU) += edu.o > +common-obj-$(CONFIG_PCA9552) += pca9552.o > > common-obj-y += unimp.o > > diff --git a/hw/misc/pca9552.c b/hw/misc/pca9552.c > new file mode 100644 > index 000000000000..70ce6f038da2 > --- /dev/null > +++ b/hw/misc/pca9552.c > @@ -0,0 +1,259 @@ > +/* > + * PCA9552 I2C LED blinker > + * > + * https://www.nxp.com/docs/en/application-note/AN264.pdf > + * > + * Copyright (c) 2017, IBM Corporation. > + * > + * This work is licensed under the terms of the GNU GPL, version 2 or > + * later. See the COPYING file in the top-level directory. > + */ > + > +#include "qemu/osdep.h" > +#include "qemu/log.h" > +#include "hw/hw.h" > +#include "hw/misc/pca9552.h" > + > +/* > + * Bits [0:3] are used to address a specific register. > + */ > +#define PCA9552_INPUT0 0 /* read only input register 0 */ > +#define PCA9552_INPUT1 1 /* read only input register 1 */ > +#define PCA9552_PSC0 2 /* read/write frequency prescaler 0 */ > +#define PCA9552_PWM0 3 /* read/write PWM register 0 */ > +#define PCA9552_PSC1 4 /* read/write frequency prescaler 1 */ > +#define PCA9552_PWM1 5 /* read/write PWM register 1 */ > +#define PCA9552_LS0 6 /* read/write LED0 to LED3 selector */ > +#define PCA9552_LS1 7 /* read/write LED4 to LED7 selector */ > +#define PCA9552_LS2 8 /* read/write LED8 to LED11 selector */ > +#define PCA9552_LS3 9 /* read/write LED12 to LED15 selector */ Since you use those in your test, can you move them to "hw/misc/pca9552.h"? > + > +/* > + * Bit [4] is used to activate the Auto-Increment option of the > + * register address > + */ > +#define PCA9552_AUTOINC (1 << 4) ditto > + > +#define PCA9552_LED_ON 0x0 > +#define PCA9552_LED_OFF 0x1 > +#define PCA9552_LED_PWM0 0x2 > +#define PCA9552_LED_PWM1 0x3 > + > +static uint8_t pca9552_pin_get_config(PCA9552State *s, int pin) > +{ > + uint8_t reg = PCA9552_LS0 + (pin / 4); > + uint8_t shift = (pin % 4) << 1; > + > + return extract32(s->regs[reg], shift, 2); > +} > + > +static void pca9552_update_pin_input(PCA9552State *s) > +{ > + int i; > + > + for (i = 0; i < s->nr_leds; i++) { > + uint8_t input_reg = PCA9552_INPUT0 + (i / 8); > + uint8_t input_shift = (i % 8); > + uint8_t config = pca9552_pin_get_config(s, i); > + > + switch (config) { > + case PCA9552_LED_ON: > + s->regs[input_reg] |= 1 << input_shift; > + break; > + case PCA9552_LED_OFF: > + s->regs[input_reg] &= ~(1 << input_shift); > + break; > + case PCA9552_LED_PWM0: > + case PCA9552_LED_PWM1: > + /* TODO */ > + default: > + break; > + } > + } > +} > + > +static uint8_t pca9552_read(PCA9552State *s, uint8_t reg) > +{ > + switch (reg) { > + case PCA9552_INPUT0: > + case PCA9552_INPUT1: > + case PCA9552_PSC0: > + case PCA9552_PWM0: > + case PCA9552_PSC1: > + case PCA9552_PWM1: > + case PCA9552_LS0: > + case PCA9552_LS1: > + case PCA9552_LS2: > + case PCA9552_LS3: > + return s->regs[reg]; > + default: > + qemu_log_mask(LOG_GUEST_ERROR, "%s: unexpected read to register %d\n", > + __func__, reg); > + return 0xFF; > + } > +} > + > +static void pca9552_write(PCA9552State *s, uint8_t reg, uint8_t data) > +{ > + switch (reg) { > + case PCA9552_PSC0: > + case PCA9552_PWM0: > + case PCA9552_PSC1: > + case PCA9552_PWM1: > + s->regs[reg] = data; > + break; > + > + case PCA9552_LS0: > + case PCA9552_LS1: > + case PCA9552_LS2: > + case PCA9552_LS3: > + s->regs[reg] = data; > + pca9552_update_pin_input(s); > + break; > + > + case PCA9552_INPUT0: > + case PCA9552_INPUT1: > + default: > + qemu_log_mask(LOG_GUEST_ERROR, "%s: unexpected write to register %d\n", > + __func__, reg); > + } > +} > + > +/* > + * When Auto-Increment is on, the register address is incremented > + * after each byte is sent to or received by the device. The index > + * rollovers to 0 when the maximum register address is reached. > + */ > +static void pca9552_autoinc(PCA9552State *s) > +{ > + if (s->pointer != 0xFF && s->pointer & PCA9552_AUTOINC) { > + uint8_t reg = s->pointer & 0xf; > + > + reg = (reg + 1) % (s->max_reg + 1); > + s->pointer = reg | PCA9552_AUTOINC; > + } > +} > + > +static int pca9552_recv(I2CSlave *i2c) > +{ > + PCA9552State *s = PCA9552(i2c); > + uint8_t ret; > + > + ret = pca9552_read(s, s->pointer & 0xf); > + > + /* > + * From the Specs: > + * > + * Important Note: When a Read sequence is initiated and the > + * AI bit is set to Logic Level 1, the Read Sequence MUST > + * start by a register different from 0. > + * > + * I don't know what should be done in this case, so throw an > + * error. > + */ > + if (s->pointer == PCA9552_AUTOINC) { > + qemu_log_mask(LOG_GUEST_ERROR, > + "%s: Autoincrement read starting with register 0\n", > + __func__); > + } > + > + pca9552_autoinc(s); > + > + return ret; > +} > + > +static int pca9552_send(I2CSlave *i2c, uint8_t data) > +{ > + PCA9552State *s = PCA9552(i2c); > + > + /* First byte sent by is the register address */ > + if (s->len == 0) { > + s->pointer = data; > + s->len++; > + } else { > + pca9552_write(s, s->pointer & 0xf, data); > + > + pca9552_autoinc(s); > + } > + > + return 0; > +} > + > +static int pca9552_event(I2CSlave *i2c, enum i2c_event event) > +{ > + PCA9552State *s = PCA9552(i2c); > + > + s->len = 0; > + return 0; > +} > + > +static const VMStateDescription pca9552_vmstate = { > + .name = "PCA9552", > + .version_id = 0, > + .minimum_version_id = 0, > + .fields = (VMStateField[]) { > + VMSTATE_UINT8(len, PCA9552State), > + VMSTATE_UINT8(pointer, PCA9552State), > + VMSTATE_UINT8_ARRAY(regs, PCA9552State, PCA9552_NR_REGS), > + VMSTATE_I2C_SLAVE(i2c, PCA9552State), > + VMSTATE_END_OF_LIST() > + } > +}; > + > +static void pca9552_reset(DeviceState *dev) > +{ > + PCA9552State *s = PCA9552(dev); > + > + s->regs[PCA9552_PSC0] = 0xFF; > + s->regs[PCA9552_PWM0] = 0x80; > + s->regs[PCA9552_PSC1] = 0xFF; > + s->regs[PCA9552_PWM1] = 0x80; > + s->regs[PCA9552_LS0] = 0x55; /* all OFF */ > + s->regs[PCA9552_LS1] = 0x55; > + s->regs[PCA9552_LS2] = 0x55; > + s->regs[PCA9552_LS3] = 0x55; > + > + pca9552_update_pin_input(s); > + > + s->pointer = 0xFF; > + s->len = 0; > +} > + > +static void pca9552_initfn(Object *obj) > +{ > + PCA9552State *s = PCA9552(obj); > + > + /* If support for the other PCA955X devices are implemented, these > + * constant values might be part of class structure describing the > + * PCA955X device > + */ > + s->max_reg = PCA9552_LS3; Looks a bit weird, why not use PCA9552_NR_REGS here so pca9552_autoinc() becomes simply: reg += 1; reg %= s->max_reg; ? > + s->nr_leds = 16; > +} > + > +static void pca9552_class_init(ObjectClass *klass, void *data) > +{ > + DeviceClass *dc = DEVICE_CLASS(klass); > + I2CSlaveClass *k = I2C_SLAVE_CLASS(klass); > + > + k->event = pca9552_event; > + k->recv = pca9552_recv; > + k->send = pca9552_send; > + dc->reset = pca9552_reset; > + dc->vmsd = &pca9552_vmstate; > +} > + > +static const TypeInfo pca9552_info = { > + .name = TYPE_PCA9552, > + .parent = TYPE_I2C_SLAVE, > + .instance_init = pca9552_initfn, > + .instance_size = sizeof(PCA9552State), > + .class_init = pca9552_class_init, > +}; > + > +static void pca9552_register_types(void) > +{ > + type_register_static(&pca9552_info); > +} > + > +type_init(pca9552_register_types) > diff --git a/include/hw/misc/pca9552.h b/include/hw/misc/pca9552.h > new file mode 100644 > index 000000000000..5df8d6407ca7 > --- /dev/null > +++ b/include/hw/misc/pca9552.h > @@ -0,0 +1,33 @@ > +/* > + * PCA9552 I2C LED blinker > + * > + * Copyright (c) 2017, IBM Corporation. > + * > + * This work is licensed under the terms of the GNU GPL, version 2 or > + * later. See the COPYING file in the top-level directory. > + */ > +#ifndef PCA9552_H > +#define PCA9552_H > + > +#include "hw/i2c/i2c.h" > + > +#define TYPE_PCA9552 "pca9552" > +#define PCA9552(obj) OBJECT_CHECK(PCA9552State, (obj), TYPE_PCA9552) > + > + > +#define PCA9552_NR_REGS 10 This could be an enum (or not, matter of taste). > + > +typedef struct PCA9552State { > + /*< private >*/ > + I2CSlave i2c; > + /*< public >*/ > + > + uint8_t len; > + uint8_t pointer; > + > + uint8_t regs[PCA9552_NR_REGS]; > + uint8_t max_reg; > + uint8_t nr_leds; > +} PCA9552State; > + > +#endif > diff --git a/tests/Makefile.include b/tests/Makefile.include > index 4ca15e681703..8ac2595c8512 100644 > --- a/tests/Makefile.include > +++ b/tests/Makefile.include > @@ -347,6 +347,7 @@ check-qtest-sparc64-y = tests/endianness-test$(EXESUF) > check-qtest-sparc64-y += tests/prom-env-test$(EXESUF) > > check-qtest-arm-y = tests/tmp105-test$(EXESUF) > +check-qtest-arm-y += tests/pca9552-test$(EXESUF) > check-qtest-arm-y += tests/ds1338-test$(EXESUF) > check-qtest-arm-y += tests/m25p80-test$(EXESUF) > gcov-files-arm-y += hw/misc/tmp105.c > @@ -739,6 +740,7 @@ tests/bios-tables-test$(EXESUF): tests/bios-tables-test.o \ > tests/boot-sector.o tests/acpi-utils.o $(libqos-obj-y) > tests/pxe-test$(EXESUF): tests/pxe-test.o tests/boot-sector.o $(libqos-obj-y) > tests/tmp105-test$(EXESUF): tests/tmp105-test.o $(libqos-omap-obj-y) > +tests/pca9552-test$(EXESUF): tests/pca9552-test.o $(libqos-omap-obj-y) > tests/ds1338-test$(EXESUF): tests/ds1338-test.o $(libqos-imx-obj-y) > tests/m25p80-test$(EXESUF): tests/m25p80-test.o > tests/i440fx-test$(EXESUF): tests/i440fx-test.o $(libqos-pc-obj-y) > diff --git a/tests/pca9552-test.c b/tests/pca9552-test.c > new file mode 100644 > index 000000000000..53414452a12e > --- /dev/null > +++ b/tests/pca9552-test.c > @@ -0,0 +1,131 @@ > +/* > + * QTest testcase for the PCA9552 LED blinker > + * > + * Copyright (c) 2017, IBM Corporation. > + * > + * This work is licensed under the terms of the GNU GPL, version 2 or later. > + * See the COPYING file in the top-level directory. > + */ > + > +#include "qemu/osdep.h" > + #include "hw/misc/pca9552.h" > +#include "libqtest.h" > +#include "libqos/i2c.h" > + > +#define PCA9552_INPUT0 0 /* read only input register 0 */ > +#define PCA9552_INPUT1 1 /* read only input register 1 */ > +#define PCA9552_PSC0 2 /* read/write frequency prescaler 0 */ > +#define PCA9552_PWM0 3 /* read/write PWM register 0 */ > +#define PCA9552_PSC1 4 /* read/write frequency prescaler 1 */ > +#define PCA9552_PWM1 5 /* read/write PWM register 1 */ > +#define PCA9552_LS0 6 /* read/write LED0 to LED3 selector */ > +#define PCA9552_LS1 7 /* read/write LED4 to LED7 selector */ > +#define PCA9552_LS2 8 /* read/write LED8 to LED11 selector */ > +#define PCA9552_LS3 9 /* read/write LED12 to LED15 selector */ > + > +#define PCA9552_AUTOINC (1 << 4) > + > + > +#define OMAP2_I2C_1_BASE 0x48070000 Can you define that in "hw/arm/omap.h" ? > + > +#define PCA9552_TEST_ID "pca9552-test" > +#define PCA9552_TEST_ADDR 0x60 > + > +static I2CAdapter *i2c; > + > +static uint8_t pca9552_get8(I2CAdapter *i2c, uint8_t addr, uint8_t reg) > +{ > + uint8_t resp[1]; > + i2c_send(i2c, addr, ®, 1); > + i2c_recv(i2c, addr, resp, 1); > + return resp[0]; > +} > + > +static void pca9552_set8(I2CAdapter *i2c, uint8_t addr, uint8_t reg, > + uint8_t value) > +{ > + uint8_t cmd[2]; > + uint8_t resp[1]; > + > + cmd[0] = reg; > + cmd[1] = value; > + i2c_send(i2c, addr, cmd, 2); > + i2c_recv(i2c, addr, resp, 1); > + g_assert_cmphex(resp[0], ==, cmd[1]); > +} > + > +static void receive_autoinc(void) > +{ > + uint8_t resp; > + uint8_t reg = PCA9552_LS0 | PCA9552_AUTOINC; > + > + i2c_send(i2c, PCA9552_TEST_ADDR, ®, 1); > + > + /* PCA9552_LS0 */ > + i2c_recv(i2c, PCA9552_TEST_ADDR, &resp, 1); > + g_assert_cmphex(resp, ==, 0x54); > + > + /* PCA9552_LS1 */ > + i2c_recv(i2c, PCA9552_TEST_ADDR, &resp, 1); > + g_assert_cmphex(resp, ==, 0x55); > + > + /* PCA9552_LS2 */ > + i2c_recv(i2c, PCA9552_TEST_ADDR, &resp, 1); > + g_assert_cmphex(resp, ==, 0x55); > + > + /* PCA9552_LS3 */ > + i2c_recv(i2c, PCA9552_TEST_ADDR, &resp, 1); > + g_assert_cmphex(resp, ==, 0x54); > +} > + > +static void send_and_receive(void) > +{ > + uint8_t value; > + > + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_LS0); > + g_assert_cmphex(value, ==, 0x55); > + > + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_INPUT0); > + g_assert_cmphex(value, ==, 0x0); > + > + /* Switch on LED 0 */ > + pca9552_set8(i2c, PCA9552_TEST_ADDR, PCA9552_LS0, 0x54); > + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_LS0); > + g_assert_cmphex(value, ==, 0x54); > + > + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_INPUT0); > + g_assert_cmphex(value, ==, 0x01); > + > + /* Switch on LED 12 */ > + pca9552_set8(i2c, PCA9552_TEST_ADDR, PCA9552_LS3, 0x54); > + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_LS3); > + g_assert_cmphex(value, ==, 0x54); > + > + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_INPUT1); > + g_assert_cmphex(value, ==, 0x10); > +} > + > +int main(int argc, char **argv) > +{ > + QTestState *s = NULL; > + int ret; > + > + g_test_init(&argc, &argv, NULL); > + > + s = qtest_start("-machine n800 " > + "-device pca9552,bus=i2c-bus.0,id=" PCA9552_TEST_ID > + ",address=0x60"); > + i2c = omap_i2c_create(OMAP2_I2C_1_BASE); > + > + qtest_add_func("/pca9552/tx-rx", send_and_receive); > + qtest_add_func("/pca9552/rx-autoinc", receive_autoinc); > + > + ret = g_test_run(); > + > + if (s) { > + qtest_quit(s); > + } > + g_free(i2c); > + > + return ret; > +} > If Peter accept to queue 1-6, I'd appreciate if you can address my few suggestions then resend 7-8; else if you don't have time: Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Regards, Phil.
On 10/20/2017 04:58 AM, Philippe Mathieu-Daudé wrote: > Hi Cédric, > > On 10/19/2017 01:35 PM, Cédric Le Goater wrote: >> Specs are available here : >> >> https://www.nxp.com/docs/en/application-note/AN264.pdf >> >> This is a simple model supporting the basic registers for led and GPIO >> mode. The device also supports two blinking rates but not the model >> yet. >> >> Signed-off-by: Cédric Le Goater <clg@kaod.org> >> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> >> --- >> >> Changes since v3: >> >> - introduced auto-increment support >> - removed the buffer collecting bytes on the bus >> - improved reset >> - used extract32 >> - added a unit test >> >> Changes since v2: >> >> - removed comments on the I2C buffer size, but kept the array. I did >> not want to rewrite the buffer handling >> >> default-configs/arm-softmmu.mak | 1 + >> hw/misc/Makefile.objs | 1 + >> hw/misc/pca9552.c | 259 ++++++++++++++++++++++++++++++++++++++++ >> include/hw/misc/pca9552.h | 33 +++++ > > If you mind using scripts/git.orderfile the review'd get easier :) I didn't know about it. I will take a look. >> tests/Makefile.include | 2 + >> tests/pca9552-test.c | 131 ++++++++++++++++++++ >> 6 files changed, 427 insertions(+) >> create mode 100644 hw/misc/pca9552.c >> create mode 100644 include/hw/misc/pca9552.h >> create mode 100644 tests/pca9552-test.c >> >> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak >> index 5059d134c816..d868d1095a6c 100644 >> --- a/default-configs/arm-softmmu.mak >> +++ b/default-configs/arm-softmmu.mak >> @@ -16,6 +16,7 @@ CONFIG_TSC2005=y >> CONFIG_LM832X=y >> CONFIG_TMP105=y >> CONFIG_TMP421=y >> +CONFIG_PCA9552=y >> CONFIG_STELLARIS=y >> CONFIG_STELLARIS_INPUT=y >> CONFIG_STELLARIS_ENET=y >> diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs >> index e8f0a02f35af..e4e22880dbbc 100644 >> --- a/hw/misc/Makefile.objs >> +++ b/hw/misc/Makefile.objs >> @@ -7,6 +7,7 @@ common-obj-$(CONFIG_SGA) += sga.o >> common-obj-$(CONFIG_ISA_TESTDEV) += pc-testdev.o >> common-obj-$(CONFIG_PCI_TESTDEV) += pci-testdev.o >> common-obj-$(CONFIG_EDU) += edu.o >> +common-obj-$(CONFIG_PCA9552) += pca9552.o >> >> common-obj-y += unimp.o >> >> diff --git a/hw/misc/pca9552.c b/hw/misc/pca9552.c >> new file mode 100644 >> index 000000000000..70ce6f038da2 >> --- /dev/null >> +++ b/hw/misc/pca9552.c >> @@ -0,0 +1,259 @@ >> +/* >> + * PCA9552 I2C LED blinker >> + * >> + * https://www.nxp.com/docs/en/application-note/AN264.pdf >> + * >> + * Copyright (c) 2017, IBM Corporation. >> + * >> + * This work is licensed under the terms of the GNU GPL, version 2 or >> + * later. See the COPYING file in the top-level directory. >> + */ >> + >> +#include "qemu/osdep.h" >> +#include "qemu/log.h" >> +#include "hw/hw.h" >> +#include "hw/misc/pca9552.h" >> + >> +/* >> + * Bits [0:3] are used to address a specific register. >> + */ >> +#define PCA9552_INPUT0 0 /* read only input register 0 */ >> +#define PCA9552_INPUT1 1 /* read only input register 1 */ >> +#define PCA9552_PSC0 2 /* read/write frequency prescaler 0 */ >> +#define PCA9552_PWM0 3 /* read/write PWM register 0 */ >> +#define PCA9552_PSC1 4 /* read/write frequency prescaler 1 */ >> +#define PCA9552_PWM1 5 /* read/write PWM register 1 */ >> +#define PCA9552_LS0 6 /* read/write LED0 to LED3 selector */ >> +#define PCA9552_LS1 7 /* read/write LED4 to LED7 selector */ >> +#define PCA9552_LS2 8 /* read/write LED8 to LED11 selector */ >> +#define PCA9552_LS3 9 /* read/write LED12 to LED15 selector */ > > Since you use those in your test, can you move them to "hw/misc/pca9552.h"? yes I could stuff them under "hw/misc/pca9552_reg.h" probably. > >> + >> +/* >> + * Bit [4] is used to activate the Auto-Increment option of the >> + * register address >> + */ >> +#define PCA9552_AUTOINC (1 << 4) > > ditto > >> + >> +#define PCA9552_LED_ON 0x0 >> +#define PCA9552_LED_OFF 0x1 >> +#define PCA9552_LED_PWM0 0x2 >> +#define PCA9552_LED_PWM1 0x3 >> + >> +static uint8_t pca9552_pin_get_config(PCA9552State *s, int pin) >> +{ >> + uint8_t reg = PCA9552_LS0 + (pin / 4); >> + uint8_t shift = (pin % 4) << 1; >> + >> + return extract32(s->regs[reg], shift, 2); >> +} >> + >> +static void pca9552_update_pin_input(PCA9552State *s) >> +{ >> + int i; >> + >> + for (i = 0; i < s->nr_leds; i++) { >> + uint8_t input_reg = PCA9552_INPUT0 + (i / 8); >> + uint8_t input_shift = (i % 8); >> + uint8_t config = pca9552_pin_get_config(s, i); >> + >> + switch (config) { >> + case PCA9552_LED_ON: >> + s->regs[input_reg] |= 1 << input_shift; >> + break; >> + case PCA9552_LED_OFF: >> + s->regs[input_reg] &= ~(1 << input_shift); >> + break; >> + case PCA9552_LED_PWM0: >> + case PCA9552_LED_PWM1: >> + /* TODO */ >> + default: >> + break; >> + } >> + } >> +} >> + >> +static uint8_t pca9552_read(PCA9552State *s, uint8_t reg) >> +{ >> + switch (reg) { >> + case PCA9552_INPUT0: >> + case PCA9552_INPUT1: >> + case PCA9552_PSC0: >> + case PCA9552_PWM0: >> + case PCA9552_PSC1: >> + case PCA9552_PWM1: >> + case PCA9552_LS0: >> + case PCA9552_LS1: >> + case PCA9552_LS2: >> + case PCA9552_LS3: >> + return s->regs[reg]; >> + default: >> + qemu_log_mask(LOG_GUEST_ERROR, "%s: unexpected read to register %d\n", >> + __func__, reg); >> + return 0xFF; >> + } >> +} >> + >> +static void pca9552_write(PCA9552State *s, uint8_t reg, uint8_t data) >> +{ >> + switch (reg) { >> + case PCA9552_PSC0: >> + case PCA9552_PWM0: >> + case PCA9552_PSC1: >> + case PCA9552_PWM1: >> + s->regs[reg] = data; >> + break; >> + >> + case PCA9552_LS0: >> + case PCA9552_LS1: >> + case PCA9552_LS2: >> + case PCA9552_LS3: >> + s->regs[reg] = data; >> + pca9552_update_pin_input(s); >> + break; >> + >> + case PCA9552_INPUT0: >> + case PCA9552_INPUT1: >> + default: >> + qemu_log_mask(LOG_GUEST_ERROR, "%s: unexpected write to register %d\n", >> + __func__, reg); >> + } >> +} >> + >> +/* >> + * When Auto-Increment is on, the register address is incremented >> + * after each byte is sent to or received by the device. The index >> + * rollovers to 0 when the maximum register address is reached. >> + */ >> +static void pca9552_autoinc(PCA9552State *s) >> +{ >> + if (s->pointer != 0xFF && s->pointer & PCA9552_AUTOINC) { >> + uint8_t reg = s->pointer & 0xf; >> + >> + reg = (reg + 1) % (s->max_reg + 1); >> + s->pointer = reg | PCA9552_AUTOINC; >> + } >> +} >> + >> +static int pca9552_recv(I2CSlave *i2c) >> +{ >> + PCA9552State *s = PCA9552(i2c); >> + uint8_t ret; >> + >> + ret = pca9552_read(s, s->pointer & 0xf); >> + >> + /* >> + * From the Specs: >> + * >> + * Important Note: When a Read sequence is initiated and the >> + * AI bit is set to Logic Level 1, the Read Sequence MUST >> + * start by a register different from 0. >> + * >> + * I don't know what should be done in this case, so throw an >> + * error. >> + */ >> + if (s->pointer == PCA9552_AUTOINC) { >> + qemu_log_mask(LOG_GUEST_ERROR, >> + "%s: Autoincrement read starting with register 0\n", >> + __func__); >> + } >> + >> + pca9552_autoinc(s); >> + >> + return ret; >> +} >> + >> +static int pca9552_send(I2CSlave *i2c, uint8_t data) >> +{ >> + PCA9552State *s = PCA9552(i2c); >> + >> + /* First byte sent by is the register address */ >> + if (s->len == 0) { >> + s->pointer = data; >> + s->len++; >> + } else { >> + pca9552_write(s, s->pointer & 0xf, data); >> + >> + pca9552_autoinc(s); >> + } >> + >> + return 0; >> +} >> + >> +static int pca9552_event(I2CSlave *i2c, enum i2c_event event) >> +{ >> + PCA9552State *s = PCA9552(i2c); >> + >> + s->len = 0; >> + return 0; >> +} >> + >> +static const VMStateDescription pca9552_vmstate = { >> + .name = "PCA9552", >> + .version_id = 0, >> + .minimum_version_id = 0, >> + .fields = (VMStateField[]) { >> + VMSTATE_UINT8(len, PCA9552State), >> + VMSTATE_UINT8(pointer, PCA9552State), >> + VMSTATE_UINT8_ARRAY(regs, PCA9552State, PCA9552_NR_REGS), >> + VMSTATE_I2C_SLAVE(i2c, PCA9552State), >> + VMSTATE_END_OF_LIST() >> + } >> +}; >> + >> +static void pca9552_reset(DeviceState *dev) >> +{ >> + PCA9552State *s = PCA9552(dev); >> + >> + s->regs[PCA9552_PSC0] = 0xFF; >> + s->regs[PCA9552_PWM0] = 0x80; >> + s->regs[PCA9552_PSC1] = 0xFF; >> + s->regs[PCA9552_PWM1] = 0x80; >> + s->regs[PCA9552_LS0] = 0x55; /* all OFF */ >> + s->regs[PCA9552_LS1] = 0x55; >> + s->regs[PCA9552_LS2] = 0x55; >> + s->regs[PCA9552_LS3] = 0x55; >> + >> + pca9552_update_pin_input(s); >> + >> + s->pointer = 0xFF; >> + s->len = 0; >> +} >> + >> +static void pca9552_initfn(Object *obj) >> +{ >> + PCA9552State *s = PCA9552(obj); >> + >> + /* If support for the other PCA955X devices are implemented, these >> + * constant values might be part of class structure describing the >> + * PCA955X device >> + */ >> + s->max_reg = PCA9552_LS3; > > Looks a bit weird, why not use PCA9552_NR_REGS here so pca9552_autoinc() > becomes simply: > > reg += 1; > reg %= s->max_reg; > > ? because I expect someone (me, maybe) to add support for the PCA9550,1,3 devices and, in that case, regs[] could be shared and PCA9552_NR_REGS would represent the maximum of the maximum number of registers for all devices. >> + s->nr_leds = 16; this value would change also for each device. >> +} >> + >> +static void pca9552_class_init(ObjectClass *klass, void *data) >> +{ >> + DeviceClass *dc = DEVICE_CLASS(klass); >> + I2CSlaveClass *k = I2C_SLAVE_CLASS(klass); >> + >> + k->event = pca9552_event; >> + k->recv = pca9552_recv; >> + k->send = pca9552_send; >> + dc->reset = pca9552_reset; >> + dc->vmsd = &pca9552_vmstate; >> +} >> + >> +static const TypeInfo pca9552_info = { >> + .name = TYPE_PCA9552, >> + .parent = TYPE_I2C_SLAVE, >> + .instance_init = pca9552_initfn, >> + .instance_size = sizeof(PCA9552State), >> + .class_init = pca9552_class_init, >> +}; >> + >> +static void pca9552_register_types(void) >> +{ >> + type_register_static(&pca9552_info); >> +} >> + >> +type_init(pca9552_register_types) >> diff --git a/include/hw/misc/pca9552.h b/include/hw/misc/pca9552.h >> new file mode 100644 >> index 000000000000..5df8d6407ca7 >> --- /dev/null >> +++ b/include/hw/misc/pca9552.h >> @@ -0,0 +1,33 @@ >> +/* >> + * PCA9552 I2C LED blinker >> + * >> + * Copyright (c) 2017, IBM Corporation. >> + * >> + * This work is licensed under the terms of the GNU GPL, version 2 or >> + * later. See the COPYING file in the top-level directory. >> + */ >> +#ifndef PCA9552_H >> +#define PCA9552_H >> + >> +#include "hw/i2c/i2c.h" >> + >> +#define TYPE_PCA9552 "pca9552" >> +#define PCA9552(obj) OBJECT_CHECK(PCA9552State, (obj), TYPE_PCA9552) >> + >> + >> +#define PCA9552_NR_REGS 10 > > This could be an enum (or not, matter of taste). a define is fine IMO. >> + >> +typedef struct PCA9552State { >> + /*< private >*/ >> + I2CSlave i2c; >> + /*< public >*/ >> + >> + uint8_t len; >> + uint8_t pointer; >> + >> + uint8_t regs[PCA9552_NR_REGS]; >> + uint8_t max_reg; >> + uint8_t nr_leds; >> +} PCA9552State; >> + >> +#endif >> diff --git a/tests/Makefile.include b/tests/Makefile.include >> index 4ca15e681703..8ac2595c8512 100644 >> --- a/tests/Makefile.include >> +++ b/tests/Makefile.include >> @@ -347,6 +347,7 @@ check-qtest-sparc64-y = tests/endianness-test$(EXESUF) >> check-qtest-sparc64-y += tests/prom-env-test$(EXESUF) >> >> check-qtest-arm-y = tests/tmp105-test$(EXESUF) >> +check-qtest-arm-y += tests/pca9552-test$(EXESUF) >> check-qtest-arm-y += tests/ds1338-test$(EXESUF) >> check-qtest-arm-y += tests/m25p80-test$(EXESUF) >> gcov-files-arm-y += hw/misc/tmp105.c >> @@ -739,6 +740,7 @@ tests/bios-tables-test$(EXESUF): tests/bios-tables-test.o \ >> tests/boot-sector.o tests/acpi-utils.o $(libqos-obj-y) >> tests/pxe-test$(EXESUF): tests/pxe-test.o tests/boot-sector.o $(libqos-obj-y) >> tests/tmp105-test$(EXESUF): tests/tmp105-test.o $(libqos-omap-obj-y) >> +tests/pca9552-test$(EXESUF): tests/pca9552-test.o $(libqos-omap-obj-y) >> tests/ds1338-test$(EXESUF): tests/ds1338-test.o $(libqos-imx-obj-y) >> tests/m25p80-test$(EXESUF): tests/m25p80-test.o >> tests/i440fx-test$(EXESUF): tests/i440fx-test.o $(libqos-pc-obj-y) >> diff --git a/tests/pca9552-test.c b/tests/pca9552-test.c >> new file mode 100644 >> index 000000000000..53414452a12e >> --- /dev/null >> +++ b/tests/pca9552-test.c >> @@ -0,0 +1,131 @@ >> +/* >> + * QTest testcase for the PCA9552 LED blinker >> + * >> + * Copyright (c) 2017, IBM Corporation. >> + * >> + * This work is licensed under the terms of the GNU GPL, version 2 or later. >> + * See the COPYING file in the top-level directory. >> + */ >> + >> +#include "qemu/osdep.h" >> + > > #include "hw/misc/pca9552.h" > >> +#include "libqtest.h" >> +#include "libqos/i2c.h" >> + >> +#define PCA9552_INPUT0 0 /* read only input register 0 */ >> +#define PCA9552_INPUT1 1 /* read only input register 1 */ >> +#define PCA9552_PSC0 2 /* read/write frequency prescaler 0 */ >> +#define PCA9552_PWM0 3 /* read/write PWM register 0 */ >> +#define PCA9552_PSC1 4 /* read/write frequency prescaler 1 */ >> +#define PCA9552_PWM1 5 /* read/write PWM register 1 */ >> +#define PCA9552_LS0 6 /* read/write LED0 to LED3 selector */ >> +#define PCA9552_LS1 7 /* read/write LED4 to LED7 selector */ >> +#define PCA9552_LS2 8 /* read/write LED8 to LED11 selector */ >> +#define PCA9552_LS3 9 /* read/write LED12 to LED15 selector */ >> + >> +#define PCA9552_AUTOINC (1 << 4) >> + >> + >> +#define OMAP2_I2C_1_BASE 0x48070000 > > Can you define that in "hw/arm/omap.h" ? I suppose I can to share it with tmp105-test.c >> + >> +#define PCA9552_TEST_ID "pca9552-test" >> +#define PCA9552_TEST_ADDR 0x60 >> + >> +static I2CAdapter *i2c; >> + >> +static uint8_t pca9552_get8(I2CAdapter *i2c, uint8_t addr, uint8_t reg) >> +{ >> + uint8_t resp[1]; >> + i2c_send(i2c, addr, ®, 1); >> + i2c_recv(i2c, addr, resp, 1); >> + return resp[0]; >> +} >> + >> +static void pca9552_set8(I2CAdapter *i2c, uint8_t addr, uint8_t reg, >> + uint8_t value) >> +{ >> + uint8_t cmd[2]; >> + uint8_t resp[1]; >> + >> + cmd[0] = reg; >> + cmd[1] = value; >> + i2c_send(i2c, addr, cmd, 2); >> + i2c_recv(i2c, addr, resp, 1); >> + g_assert_cmphex(resp[0], ==, cmd[1]); >> +} >> + >> +static void receive_autoinc(void) >> +{ >> + uint8_t resp; >> + uint8_t reg = PCA9552_LS0 | PCA9552_AUTOINC; >> + >> + i2c_send(i2c, PCA9552_TEST_ADDR, ®, 1); >> + >> + /* PCA9552_LS0 */ >> + i2c_recv(i2c, PCA9552_TEST_ADDR, &resp, 1); >> + g_assert_cmphex(resp, ==, 0x54); >> + >> + /* PCA9552_LS1 */ >> + i2c_recv(i2c, PCA9552_TEST_ADDR, &resp, 1); >> + g_assert_cmphex(resp, ==, 0x55); >> + >> + /* PCA9552_LS2 */ >> + i2c_recv(i2c, PCA9552_TEST_ADDR, &resp, 1); >> + g_assert_cmphex(resp, ==, 0x55); >> + >> + /* PCA9552_LS3 */ >> + i2c_recv(i2c, PCA9552_TEST_ADDR, &resp, 1); >> + g_assert_cmphex(resp, ==, 0x54); >> +} >> + >> +static void send_and_receive(void) >> +{ >> + uint8_t value; >> + >> + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_LS0); >> + g_assert_cmphex(value, ==, 0x55); >> + >> + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_INPUT0); >> + g_assert_cmphex(value, ==, 0x0); >> + >> + /* Switch on LED 0 */ >> + pca9552_set8(i2c, PCA9552_TEST_ADDR, PCA9552_LS0, 0x54); >> + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_LS0); >> + g_assert_cmphex(value, ==, 0x54); >> + >> + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_INPUT0); >> + g_assert_cmphex(value, ==, 0x01); >> + >> + /* Switch on LED 12 */ >> + pca9552_set8(i2c, PCA9552_TEST_ADDR, PCA9552_LS3, 0x54); >> + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_LS3); >> + g_assert_cmphex(value, ==, 0x54); >> + >> + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_INPUT1); >> + g_assert_cmphex(value, ==, 0x10); >> +} >> + >> +int main(int argc, char **argv) >> +{ >> + QTestState *s = NULL; >> + int ret; >> + >> + g_test_init(&argc, &argv, NULL); >> + >> + s = qtest_start("-machine n800 " >> + "-device pca9552,bus=i2c-bus.0,id=" PCA9552_TEST_ID >> + ",address=0x60"); >> + i2c = omap_i2c_create(OMAP2_I2C_1_BASE); >> + >> + qtest_add_func("/pca9552/tx-rx", send_and_receive); >> + qtest_add_func("/pca9552/rx-autoinc", receive_autoinc); >> + >> + ret = g_test_run(); >> + >> + if (s) { >> + qtest_quit(s); >> + } >> + g_free(i2c); >> + >> + return ret; >> +} >> > > If Peter accept to queue 1-6, I'd appreciate if you can address my few > suggestions then resend 7-8; else if you don't have time: > Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> I rather address your suggestions in follow ups if you don't mind. Thanks for the review, C. > Regards, > > Phil. >
diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index 5059d134c816..d868d1095a6c 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -16,6 +16,7 @@ CONFIG_TSC2005=y CONFIG_LM832X=y CONFIG_TMP105=y CONFIG_TMP421=y +CONFIG_PCA9552=y CONFIG_STELLARIS=y CONFIG_STELLARIS_INPUT=y CONFIG_STELLARIS_ENET=y diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs index e8f0a02f35af..e4e22880dbbc 100644 --- a/hw/misc/Makefile.objs +++ b/hw/misc/Makefile.objs @@ -7,6 +7,7 @@ common-obj-$(CONFIG_SGA) += sga.o common-obj-$(CONFIG_ISA_TESTDEV) += pc-testdev.o common-obj-$(CONFIG_PCI_TESTDEV) += pci-testdev.o common-obj-$(CONFIG_EDU) += edu.o +common-obj-$(CONFIG_PCA9552) += pca9552.o common-obj-y += unimp.o diff --git a/hw/misc/pca9552.c b/hw/misc/pca9552.c new file mode 100644 index 000000000000..70ce6f038da2 --- /dev/null +++ b/hw/misc/pca9552.c @@ -0,0 +1,259 @@ +/* + * PCA9552 I2C LED blinker + * + * https://www.nxp.com/docs/en/application-note/AN264.pdf + * + * Copyright (c) 2017, IBM Corporation. + * + * This work is licensed under the terms of the GNU GPL, version 2 or + * later. See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "hw/hw.h" +#include "hw/misc/pca9552.h" + +/* + * Bits [0:3] are used to address a specific register. + */ +#define PCA9552_INPUT0 0 /* read only input register 0 */ +#define PCA9552_INPUT1 1 /* read only input register 1 */ +#define PCA9552_PSC0 2 /* read/write frequency prescaler 0 */ +#define PCA9552_PWM0 3 /* read/write PWM register 0 */ +#define PCA9552_PSC1 4 /* read/write frequency prescaler 1 */ +#define PCA9552_PWM1 5 /* read/write PWM register 1 */ +#define PCA9552_LS0 6 /* read/write LED0 to LED3 selector */ +#define PCA9552_LS1 7 /* read/write LED4 to LED7 selector */ +#define PCA9552_LS2 8 /* read/write LED8 to LED11 selector */ +#define PCA9552_LS3 9 /* read/write LED12 to LED15 selector */ + +/* + * Bit [4] is used to activate the Auto-Increment option of the + * register address + */ +#define PCA9552_AUTOINC (1 << 4) + +#define PCA9552_LED_ON 0x0 +#define PCA9552_LED_OFF 0x1 +#define PCA9552_LED_PWM0 0x2 +#define PCA9552_LED_PWM1 0x3 + +static uint8_t pca9552_pin_get_config(PCA9552State *s, int pin) +{ + uint8_t reg = PCA9552_LS0 + (pin / 4); + uint8_t shift = (pin % 4) << 1; + + return extract32(s->regs[reg], shift, 2); +} + +static void pca9552_update_pin_input(PCA9552State *s) +{ + int i; + + for (i = 0; i < s->nr_leds; i++) { + uint8_t input_reg = PCA9552_INPUT0 + (i / 8); + uint8_t input_shift = (i % 8); + uint8_t config = pca9552_pin_get_config(s, i); + + switch (config) { + case PCA9552_LED_ON: + s->regs[input_reg] |= 1 << input_shift; + break; + case PCA9552_LED_OFF: + s->regs[input_reg] &= ~(1 << input_shift); + break; + case PCA9552_LED_PWM0: + case PCA9552_LED_PWM1: + /* TODO */ + default: + break; + } + } +} + +static uint8_t pca9552_read(PCA9552State *s, uint8_t reg) +{ + switch (reg) { + case PCA9552_INPUT0: + case PCA9552_INPUT1: + case PCA9552_PSC0: + case PCA9552_PWM0: + case PCA9552_PSC1: + case PCA9552_PWM1: + case PCA9552_LS0: + case PCA9552_LS1: + case PCA9552_LS2: + case PCA9552_LS3: + return s->regs[reg]; + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: unexpected read to register %d\n", + __func__, reg); + return 0xFF; + } +} + +static void pca9552_write(PCA9552State *s, uint8_t reg, uint8_t data) +{ + switch (reg) { + case PCA9552_PSC0: + case PCA9552_PWM0: + case PCA9552_PSC1: + case PCA9552_PWM1: + s->regs[reg] = data; + break; + + case PCA9552_LS0: + case PCA9552_LS1: + case PCA9552_LS2: + case PCA9552_LS3: + s->regs[reg] = data; + pca9552_update_pin_input(s); + break; + + case PCA9552_INPUT0: + case PCA9552_INPUT1: + default: + qemu_log_mask(LOG_GUEST_ERROR, "%s: unexpected write to register %d\n", + __func__, reg); + } +} + +/* + * When Auto-Increment is on, the register address is incremented + * after each byte is sent to or received by the device. The index + * rollovers to 0 when the maximum register address is reached. + */ +static void pca9552_autoinc(PCA9552State *s) +{ + if (s->pointer != 0xFF && s->pointer & PCA9552_AUTOINC) { + uint8_t reg = s->pointer & 0xf; + + reg = (reg + 1) % (s->max_reg + 1); + s->pointer = reg | PCA9552_AUTOINC; + } +} + +static int pca9552_recv(I2CSlave *i2c) +{ + PCA9552State *s = PCA9552(i2c); + uint8_t ret; + + ret = pca9552_read(s, s->pointer & 0xf); + + /* + * From the Specs: + * + * Important Note: When a Read sequence is initiated and the + * AI bit is set to Logic Level 1, the Read Sequence MUST + * start by a register different from 0. + * + * I don't know what should be done in this case, so throw an + * error. + */ + if (s->pointer == PCA9552_AUTOINC) { + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Autoincrement read starting with register 0\n", + __func__); + } + + pca9552_autoinc(s); + + return ret; +} + +static int pca9552_send(I2CSlave *i2c, uint8_t data) +{ + PCA9552State *s = PCA9552(i2c); + + /* First byte sent by is the register address */ + if (s->len == 0) { + s->pointer = data; + s->len++; + } else { + pca9552_write(s, s->pointer & 0xf, data); + + pca9552_autoinc(s); + } + + return 0; +} + +static int pca9552_event(I2CSlave *i2c, enum i2c_event event) +{ + PCA9552State *s = PCA9552(i2c); + + s->len = 0; + return 0; +} + +static const VMStateDescription pca9552_vmstate = { + .name = "PCA9552", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT8(len, PCA9552State), + VMSTATE_UINT8(pointer, PCA9552State), + VMSTATE_UINT8_ARRAY(regs, PCA9552State, PCA9552_NR_REGS), + VMSTATE_I2C_SLAVE(i2c, PCA9552State), + VMSTATE_END_OF_LIST() + } +}; + +static void pca9552_reset(DeviceState *dev) +{ + PCA9552State *s = PCA9552(dev); + + s->regs[PCA9552_PSC0] = 0xFF; + s->regs[PCA9552_PWM0] = 0x80; + s->regs[PCA9552_PSC1] = 0xFF; + s->regs[PCA9552_PWM1] = 0x80; + s->regs[PCA9552_LS0] = 0x55; /* all OFF */ + s->regs[PCA9552_LS1] = 0x55; + s->regs[PCA9552_LS2] = 0x55; + s->regs[PCA9552_LS3] = 0x55; + + pca9552_update_pin_input(s); + + s->pointer = 0xFF; + s->len = 0; +} + +static void pca9552_initfn(Object *obj) +{ + PCA9552State *s = PCA9552(obj); + + /* If support for the other PCA955X devices are implemented, these + * constant values might be part of class structure describing the + * PCA955X device + */ + s->max_reg = PCA9552_LS3; + s->nr_leds = 16; +} + +static void pca9552_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + I2CSlaveClass *k = I2C_SLAVE_CLASS(klass); + + k->event = pca9552_event; + k->recv = pca9552_recv; + k->send = pca9552_send; + dc->reset = pca9552_reset; + dc->vmsd = &pca9552_vmstate; +} + +static const TypeInfo pca9552_info = { + .name = TYPE_PCA9552, + .parent = TYPE_I2C_SLAVE, + .instance_init = pca9552_initfn, + .instance_size = sizeof(PCA9552State), + .class_init = pca9552_class_init, +}; + +static void pca9552_register_types(void) +{ + type_register_static(&pca9552_info); +} + +type_init(pca9552_register_types) diff --git a/include/hw/misc/pca9552.h b/include/hw/misc/pca9552.h new file mode 100644 index 000000000000..5df8d6407ca7 --- /dev/null +++ b/include/hw/misc/pca9552.h @@ -0,0 +1,33 @@ +/* + * PCA9552 I2C LED blinker + * + * Copyright (c) 2017, IBM Corporation. + * + * This work is licensed under the terms of the GNU GPL, version 2 or + * later. See the COPYING file in the top-level directory. + */ +#ifndef PCA9552_H +#define PCA9552_H + +#include "hw/i2c/i2c.h" + +#define TYPE_PCA9552 "pca9552" +#define PCA9552(obj) OBJECT_CHECK(PCA9552State, (obj), TYPE_PCA9552) + + +#define PCA9552_NR_REGS 10 + +typedef struct PCA9552State { + /*< private >*/ + I2CSlave i2c; + /*< public >*/ + + uint8_t len; + uint8_t pointer; + + uint8_t regs[PCA9552_NR_REGS]; + uint8_t max_reg; + uint8_t nr_leds; +} PCA9552State; + +#endif diff --git a/tests/Makefile.include b/tests/Makefile.include index 4ca15e681703..8ac2595c8512 100644 --- a/tests/Makefile.include +++ b/tests/Makefile.include @@ -347,6 +347,7 @@ check-qtest-sparc64-y = tests/endianness-test$(EXESUF) check-qtest-sparc64-y += tests/prom-env-test$(EXESUF) check-qtest-arm-y = tests/tmp105-test$(EXESUF) +check-qtest-arm-y += tests/pca9552-test$(EXESUF) check-qtest-arm-y += tests/ds1338-test$(EXESUF) check-qtest-arm-y += tests/m25p80-test$(EXESUF) gcov-files-arm-y += hw/misc/tmp105.c @@ -739,6 +740,7 @@ tests/bios-tables-test$(EXESUF): tests/bios-tables-test.o \ tests/boot-sector.o tests/acpi-utils.o $(libqos-obj-y) tests/pxe-test$(EXESUF): tests/pxe-test.o tests/boot-sector.o $(libqos-obj-y) tests/tmp105-test$(EXESUF): tests/tmp105-test.o $(libqos-omap-obj-y) +tests/pca9552-test$(EXESUF): tests/pca9552-test.o $(libqos-omap-obj-y) tests/ds1338-test$(EXESUF): tests/ds1338-test.o $(libqos-imx-obj-y) tests/m25p80-test$(EXESUF): tests/m25p80-test.o tests/i440fx-test$(EXESUF): tests/i440fx-test.o $(libqos-pc-obj-y) diff --git a/tests/pca9552-test.c b/tests/pca9552-test.c new file mode 100644 index 000000000000..53414452a12e --- /dev/null +++ b/tests/pca9552-test.c @@ -0,0 +1,131 @@ +/* + * QTest testcase for the PCA9552 LED blinker + * + * Copyright (c) 2017, IBM Corporation. + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" + +#include "libqtest.h" +#include "libqos/i2c.h" + +#define PCA9552_INPUT0 0 /* read only input register 0 */ +#define PCA9552_INPUT1 1 /* read only input register 1 */ +#define PCA9552_PSC0 2 /* read/write frequency prescaler 0 */ +#define PCA9552_PWM0 3 /* read/write PWM register 0 */ +#define PCA9552_PSC1 4 /* read/write frequency prescaler 1 */ +#define PCA9552_PWM1 5 /* read/write PWM register 1 */ +#define PCA9552_LS0 6 /* read/write LED0 to LED3 selector */ +#define PCA9552_LS1 7 /* read/write LED4 to LED7 selector */ +#define PCA9552_LS2 8 /* read/write LED8 to LED11 selector */ +#define PCA9552_LS3 9 /* read/write LED12 to LED15 selector */ + +#define PCA9552_AUTOINC (1 << 4) + + +#define OMAP2_I2C_1_BASE 0x48070000 + +#define PCA9552_TEST_ID "pca9552-test" +#define PCA9552_TEST_ADDR 0x60 + +static I2CAdapter *i2c; + +static uint8_t pca9552_get8(I2CAdapter *i2c, uint8_t addr, uint8_t reg) +{ + uint8_t resp[1]; + i2c_send(i2c, addr, ®, 1); + i2c_recv(i2c, addr, resp, 1); + return resp[0]; +} + +static void pca9552_set8(I2CAdapter *i2c, uint8_t addr, uint8_t reg, + uint8_t value) +{ + uint8_t cmd[2]; + uint8_t resp[1]; + + cmd[0] = reg; + cmd[1] = value; + i2c_send(i2c, addr, cmd, 2); + i2c_recv(i2c, addr, resp, 1); + g_assert_cmphex(resp[0], ==, cmd[1]); +} + +static void receive_autoinc(void) +{ + uint8_t resp; + uint8_t reg = PCA9552_LS0 | PCA9552_AUTOINC; + + i2c_send(i2c, PCA9552_TEST_ADDR, ®, 1); + + /* PCA9552_LS0 */ + i2c_recv(i2c, PCA9552_TEST_ADDR, &resp, 1); + g_assert_cmphex(resp, ==, 0x54); + + /* PCA9552_LS1 */ + i2c_recv(i2c, PCA9552_TEST_ADDR, &resp, 1); + g_assert_cmphex(resp, ==, 0x55); + + /* PCA9552_LS2 */ + i2c_recv(i2c, PCA9552_TEST_ADDR, &resp, 1); + g_assert_cmphex(resp, ==, 0x55); + + /* PCA9552_LS3 */ + i2c_recv(i2c, PCA9552_TEST_ADDR, &resp, 1); + g_assert_cmphex(resp, ==, 0x54); +} + +static void send_and_receive(void) +{ + uint8_t value; + + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_LS0); + g_assert_cmphex(value, ==, 0x55); + + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_INPUT0); + g_assert_cmphex(value, ==, 0x0); + + /* Switch on LED 0 */ + pca9552_set8(i2c, PCA9552_TEST_ADDR, PCA9552_LS0, 0x54); + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_LS0); + g_assert_cmphex(value, ==, 0x54); + + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_INPUT0); + g_assert_cmphex(value, ==, 0x01); + + /* Switch on LED 12 */ + pca9552_set8(i2c, PCA9552_TEST_ADDR, PCA9552_LS3, 0x54); + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_LS3); + g_assert_cmphex(value, ==, 0x54); + + value = pca9552_get8(i2c, PCA9552_TEST_ADDR, PCA9552_INPUT1); + g_assert_cmphex(value, ==, 0x10); +} + +int main(int argc, char **argv) +{ + QTestState *s = NULL; + int ret; + + g_test_init(&argc, &argv, NULL); + + s = qtest_start("-machine n800 " + "-device pca9552,bus=i2c-bus.0,id=" PCA9552_TEST_ID + ",address=0x60"); + i2c = omap_i2c_create(OMAP2_I2C_1_BASE); + + qtest_add_func("/pca9552/tx-rx", send_and_receive); + qtest_add_func("/pca9552/rx-autoinc", receive_autoinc); + + ret = g_test_run(); + + if (s) { + qtest_quit(s); + } + g_free(i2c); + + return ret; +}