Message ID | 20130214171503.GA20373@redhat.com |
---|---|
State | New |
Headers | show |
Il 14/02/2013 18:15, Michael S. Tsirkin ha scritto: > QEMU 1.3 does not emulate the link auto negotiation, so if migrate to a > 1.3 machine during link auto negotiation, the guest link will be set to down. > Fix this by just disabling auto negotiation for 1.3. > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> A nicer property name perhaps would be preferrable, but it's fine if Anthony doesn't want to let the release slip. Paolo > --- > hw/e1000.c | 25 +++++++++++++++++++++++++ > hw/pc_piix.c | 4 ++++ > 2 files changed, 29 insertions(+) > > diff --git a/hw/e1000.c b/hw/e1000.c > index d6fe815..263f2f4 100644 > --- a/hw/e1000.c > +++ b/hw/e1000.c > @@ -131,6 +131,11 @@ typedef struct E1000State_st { > } eecd_state; > > QEMUTimer *autoneg_timer; > + > +/* Enabled compatibility for migration to/from rhel6.3.0 and older */ > +#define E1000_FLAG_QEMU_13_BIT 0 > +#define E1000_FLAG_QEMU_13 (1 << E1000_FLAG_QEMU_13_BIT) > + uint32_t compat_flags; > } E1000State; > > #define defreg(x) x = (E1000_##x>>2) > @@ -165,6 +170,14 @@ e1000_link_up(E1000State *s) > static void > set_phy_ctrl(E1000State *s, int index, uint16_t val) > { > + /* > + * QEMU 1.3 does not support link auto-negotiation emulation, so if we > + * migrate during auto negotiation, after migration the link will be > + * down. > + */ > + if (s->compat_flags & E1000_FLAG_QEMU_13) { > + return; > + } > if ((val & MII_CR_AUTO_NEG_EN) && (val & MII_CR_RESTART_AUTO_NEG)) { > e1000_link_down(s); > s->phy_reg[PHY_STATUS] &= ~MII_SR_AUTONEG_COMPLETE; > @@ -1120,6 +1133,11 @@ static void e1000_pre_save(void *opaque) > { > E1000State *s = opaque; > NetClientState *nc = qemu_get_queue(s->nic); > + > + if (s->compat_flags & E1000_FLAG_QEMU_13) { > + return; > + } > + > /* > * If link is down and auto-negotiation is ongoing, complete > * auto-negotiation immediately. This allows is to look at > @@ -1141,6 +1159,11 @@ static int e1000_post_load(void *opaque, int version_id) > * to link status bit in mac_reg[STATUS]. > * Alternatively, restart link negotiation if it was in progress. */ > nc->link_down = (s->mac_reg[STATUS] & E1000_STATUS_LU) == 0; > + > + if (s->compat_flags & E1000_FLAG_QEMU_13) { > + return 0; > + } > + > if (s->phy_reg[PHY_CTRL] & MII_CR_AUTO_NEG_EN && > s->phy_reg[PHY_CTRL] & MII_CR_RESTART_AUTO_NEG && > !(s->phy_reg[PHY_STATUS] & MII_SR_AUTONEG_COMPLETE)) { > @@ -1343,6 +1366,8 @@ static void qdev_e1000_reset(DeviceState *dev) > > static Property e1000_properties[] = { > DEFINE_NIC_PROPERTIES(E1000State, conf), > + DEFINE_PROP_BIT("x-qemu_13_compat", E1000State, > + compat_flags, E1000_FLAG_QEMU_13, false), > DEFINE_PROP_END_OF_LIST(), > }; > > diff --git a/hw/pc_piix.c b/hw/pc_piix.c > index ba09714..89a3f1f 100644 > --- a/hw/pc_piix.c > +++ b/hw/pc_piix.c > @@ -537,6 +537,10 @@ static QEMUMachine pc_machine_v0_13 = { > .driver = "vmware-svga", > .property = "rombar", > .value = stringify(0), > + },{ > + .driver = "e1000", > + .property = "x-qemu_13_compat", > + .value = "on", > }, > { /* end of list */ } > }, >
"Michael S. Tsirkin" <mst@redhat.com> writes: > QEMU 1.3 does not emulate the link auto negotiation, so if migrate to a > 1.3 machine during link auto negotiation, the guest link will be set to down. > Fix this by just disabling auto negotiation for 1.3. > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> > --- > hw/e1000.c | 25 +++++++++++++++++++++++++ > hw/pc_piix.c | 4 ++++ > 2 files changed, 29 insertions(+) > > diff --git a/hw/e1000.c b/hw/e1000.c > index d6fe815..263f2f4 100644 > --- a/hw/e1000.c > +++ b/hw/e1000.c > @@ -131,6 +131,11 @@ typedef struct E1000State_st { > } eecd_state; > > QEMUTimer *autoneg_timer; > + > +/* Enabled compatibility for migration to/from rhel6.3.0 and older */ I presume you mean QEMU 1.3... > +#define E1000_FLAG_QEMU_13_BIT 0 > +#define E1000_FLAG_QEMU_13 (1 << E1000_FLAG_QEMU_13_BIT) > + uint32_t compat_flags; > } E1000State; > > #define defreg(x) x = (E1000_##x>>2) > @@ -165,6 +170,14 @@ e1000_link_up(E1000State *s) > static void > set_phy_ctrl(E1000State *s, int index, uint16_t val) > { > + /* > + * QEMU 1.3 does not support link auto-negotiation emulation, so if we > + * migrate during auto negotiation, after migration the link will be > + * down. > + */ > + if (s->compat_flags & E1000_FLAG_QEMU_13) { > + return; > + } > if ((val & MII_CR_AUTO_NEG_EN) && (val & MII_CR_RESTART_AUTO_NEG)) { > e1000_link_down(s); > s->phy_reg[PHY_STATUS] &= ~MII_SR_AUTONEG_COMPLETE; > @@ -1120,6 +1133,11 @@ static void e1000_pre_save(void *opaque) > { > E1000State *s = opaque; > NetClientState *nc = qemu_get_queue(s->nic); > + > + if (s->compat_flags & E1000_FLAG_QEMU_13) { > + return; > + } > + > /* > * If link is down and auto-negotiation is ongoing, complete > * auto-negotiation immediately. This allows is to look at > @@ -1141,6 +1159,11 @@ static int e1000_post_load(void *opaque, int version_id) > * to link status bit in mac_reg[STATUS]. > * Alternatively, restart link negotiation if it was in progress. */ > nc->link_down = (s->mac_reg[STATUS] & E1000_STATUS_LU) == 0; > + > + if (s->compat_flags & E1000_FLAG_QEMU_13) { > + return 0; > + } > + > if (s->phy_reg[PHY_CTRL] & MII_CR_AUTO_NEG_EN && > s->phy_reg[PHY_CTRL] & MII_CR_RESTART_AUTO_NEG && > !(s->phy_reg[PHY_STATUS] & MII_SR_AUTONEG_COMPLETE)) { > @@ -1343,6 +1366,8 @@ static void qdev_e1000_reset(DeviceState *dev) > > static Property e1000_properties[] = { > DEFINE_NIC_PROPERTIES(E1000State, conf), > + DEFINE_PROP_BIT("x-qemu_13_compat", E1000State, > + compat_flags, E1000_FLAG_QEMU_13, false), > DEFINE_PROP_END_OF_LIST(), Would it make more sense to simply call this auto-negotiation? Regards, Anthony Liguori > }; > > diff --git a/hw/pc_piix.c b/hw/pc_piix.c > index ba09714..89a3f1f 100644 > --- a/hw/pc_piix.c > +++ b/hw/pc_piix.c > @@ -537,6 +537,10 @@ static QEMUMachine pc_machine_v0_13 = { > .driver = "vmware-svga", > .property = "rombar", > .value = stringify(0), > + },{ > + .driver = "e1000", > + .property = "x-qemu_13_compat", > + .value = "on", > }, > { /* end of list */ } > }, > -- > MST
On Thu, Feb 14, 2013 at 01:50:04PM -0600, Anthony Liguori wrote: > "Michael S. Tsirkin" <mst@redhat.com> writes: > > > QEMU 1.3 does not emulate the link auto negotiation, so if migrate to a > > 1.3 machine during link auto negotiation, the guest link will be set to down. > > Fix this by just disabling auto negotiation for 1.3. > > > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> > > --- > > hw/e1000.c | 25 +++++++++++++++++++++++++ > > hw/pc_piix.c | 4 ++++ > > 2 files changed, 29 insertions(+) > > > > diff --git a/hw/e1000.c b/hw/e1000.c > > index d6fe815..263f2f4 100644 > > --- a/hw/e1000.c > > +++ b/hw/e1000.c > > @@ -131,6 +131,11 @@ typedef struct E1000State_st { > > } eecd_state; > > > > QEMUTimer *autoneg_timer; > > + > > +/* Enabled compatibility for migration to/from rhel6.3.0 and older */ > > I presume you mean QEMU 1.3... Yack. > > +#define E1000_FLAG_QEMU_13_BIT 0 > > +#define E1000_FLAG_QEMU_13 (1 << E1000_FLAG_QEMU_13_BIT) > > + uint32_t compat_flags; > > } E1000State; > > > > #define defreg(x) x = (E1000_##x>>2) > > @@ -165,6 +170,14 @@ e1000_link_up(E1000State *s) > > static void > > set_phy_ctrl(E1000State *s, int index, uint16_t val) > > { > > + /* > > + * QEMU 1.3 does not support link auto-negotiation emulation, so if we > > + * migrate during auto negotiation, after migration the link will be > > + * down. > > + */ > > + if (s->compat_flags & E1000_FLAG_QEMU_13) { > > + return; > > + } > > if ((val & MII_CR_AUTO_NEG_EN) && (val & MII_CR_RESTART_AUTO_NEG)) { > > e1000_link_down(s); > > s->phy_reg[PHY_STATUS] &= ~MII_SR_AUTONEG_COMPLETE; > > @@ -1120,6 +1133,11 @@ static void e1000_pre_save(void *opaque) > > { > > E1000State *s = opaque; > > NetClientState *nc = qemu_get_queue(s->nic); > > + > > + if (s->compat_flags & E1000_FLAG_QEMU_13) { > > + return; > > + } > > + > > /* > > * If link is down and auto-negotiation is ongoing, complete > > * auto-negotiation immediately. This allows is to look at > > @@ -1141,6 +1159,11 @@ static int e1000_post_load(void *opaque, int version_id) > > * to link status bit in mac_reg[STATUS]. > > * Alternatively, restart link negotiation if it was in progress. */ > > nc->link_down = (s->mac_reg[STATUS] & E1000_STATUS_LU) == 0; > > + > > + if (s->compat_flags & E1000_FLAG_QEMU_13) { > > + return 0; > > + } > > + > > if (s->phy_reg[PHY_CTRL] & MII_CR_AUTO_NEG_EN && > > s->phy_reg[PHY_CTRL] & MII_CR_RESTART_AUTO_NEG && > > !(s->phy_reg[PHY_STATUS] & MII_SR_AUTONEG_COMPLETE)) { > > @@ -1343,6 +1366,8 @@ static void qdev_e1000_reset(DeviceState *dev) > > > > static Property e1000_properties[] = { > > DEFINE_NIC_PROPERTIES(E1000State, conf), > > + DEFINE_PROP_BIT("x-qemu_13_compat", E1000State, > > + compat_flags, E1000_FLAG_QEMU_13, false), > > DEFINE_PROP_END_OF_LIST(), > > Would it make more sense to simply call this auto-negotiation? Okay. > Regards, > > Anthony Liguori > > > }; > > > > diff --git a/hw/pc_piix.c b/hw/pc_piix.c > > index ba09714..89a3f1f 100644 > > --- a/hw/pc_piix.c > > +++ b/hw/pc_piix.c > > @@ -537,6 +537,10 @@ static QEMUMachine pc_machine_v0_13 = { > > .driver = "vmware-svga", > > .property = "rombar", > > .value = stringify(0), > > + },{ > > + .driver = "e1000", > > + .property = "x-qemu_13_compat", > > + .value = "on", > > }, > > { /* end of list */ } > > }, > > -- > > MST
On Thu, Feb 14, 2013 at 07:15:03PM +0200, Michael S. Tsirkin wrote: > QEMU 1.3 does not emulate the link auto negotiation, so if migrate to a > 1.3 machine during link auto negotiation, the guest link will be set to down. > Fix this by just disabling auto negotiation for 1.3. > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com> > --- > hw/e1000.c | 25 +++++++++++++++++++++++++ > hw/pc_piix.c | 4 ++++ > 2 files changed, 29 insertions(+) Besides the naming issues that have been pointed out: Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
diff --git a/hw/e1000.c b/hw/e1000.c index d6fe815..263f2f4 100644 --- a/hw/e1000.c +++ b/hw/e1000.c @@ -131,6 +131,11 @@ typedef struct E1000State_st { } eecd_state; QEMUTimer *autoneg_timer; + +/* Enabled compatibility for migration to/from rhel6.3.0 and older */ +#define E1000_FLAG_QEMU_13_BIT 0 +#define E1000_FLAG_QEMU_13 (1 << E1000_FLAG_QEMU_13_BIT) + uint32_t compat_flags; } E1000State; #define defreg(x) x = (E1000_##x>>2) @@ -165,6 +170,14 @@ e1000_link_up(E1000State *s) static void set_phy_ctrl(E1000State *s, int index, uint16_t val) { + /* + * QEMU 1.3 does not support link auto-negotiation emulation, so if we + * migrate during auto negotiation, after migration the link will be + * down. + */ + if (s->compat_flags & E1000_FLAG_QEMU_13) { + return; + } if ((val & MII_CR_AUTO_NEG_EN) && (val & MII_CR_RESTART_AUTO_NEG)) { e1000_link_down(s); s->phy_reg[PHY_STATUS] &= ~MII_SR_AUTONEG_COMPLETE; @@ -1120,6 +1133,11 @@ static void e1000_pre_save(void *opaque) { E1000State *s = opaque; NetClientState *nc = qemu_get_queue(s->nic); + + if (s->compat_flags & E1000_FLAG_QEMU_13) { + return; + } + /* * If link is down and auto-negotiation is ongoing, complete * auto-negotiation immediately. This allows is to look at @@ -1141,6 +1159,11 @@ static int e1000_post_load(void *opaque, int version_id) * to link status bit in mac_reg[STATUS]. * Alternatively, restart link negotiation if it was in progress. */ nc->link_down = (s->mac_reg[STATUS] & E1000_STATUS_LU) == 0; + + if (s->compat_flags & E1000_FLAG_QEMU_13) { + return 0; + } + if (s->phy_reg[PHY_CTRL] & MII_CR_AUTO_NEG_EN && s->phy_reg[PHY_CTRL] & MII_CR_RESTART_AUTO_NEG && !(s->phy_reg[PHY_STATUS] & MII_SR_AUTONEG_COMPLETE)) { @@ -1343,6 +1366,8 @@ static void qdev_e1000_reset(DeviceState *dev) static Property e1000_properties[] = { DEFINE_NIC_PROPERTIES(E1000State, conf), + DEFINE_PROP_BIT("x-qemu_13_compat", E1000State, + compat_flags, E1000_FLAG_QEMU_13, false), DEFINE_PROP_END_OF_LIST(), }; diff --git a/hw/pc_piix.c b/hw/pc_piix.c index ba09714..89a3f1f 100644 --- a/hw/pc_piix.c +++ b/hw/pc_piix.c @@ -537,6 +537,10 @@ static QEMUMachine pc_machine_v0_13 = { .driver = "vmware-svga", .property = "rombar", .value = stringify(0), + },{ + .driver = "e1000", + .property = "x-qemu_13_compat", + .value = "on", }, { /* end of list */ } },
QEMU 1.3 does not emulate the link auto negotiation, so if migrate to a 1.3 machine during link auto negotiation, the guest link will be set to down. Fix this by just disabling auto negotiation for 1.3. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> --- hw/e1000.c | 25 +++++++++++++++++++++++++ hw/pc_piix.c | 4 ++++ 2 files changed, 29 insertions(+)