Message ID | 20120522050454.5871.67086.stgit@bling.home |
---|---|
State | New |
Headers | show |
On 05/22/2012 01:04 AM, Alex Williamson wrote: > Add back group support for AMD& Intel. amd_iommu already tracks > devices and has init and uninit routines to manage groups. > intel-iommu does this on the fly, so we make use of the notifier > support built into iommu groups to create and remove groups. > > Signed-off-by: Alex Williamson<alex.williamson@redhat.com> > --- > > drivers/iommu/amd_iommu.c | 28 +++++++++++++++++++++++++- > drivers/iommu/intel-iommu.c | 46 +++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 73 insertions(+), 1 deletions(-) > > diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c > index 32c00cd..b7e5ddf 100644 > --- a/drivers/iommu/amd_iommu.c > +++ b/drivers/iommu/amd_iommu.c > @@ -256,9 +256,11 @@ static bool check_device(struct device *dev) > > static int iommu_init_device(struct device *dev) > { > - struct pci_dev *pdev = to_pci_dev(dev); > + struct pci_dev *dma_pdev, *pdev = to_pci_dev(dev); > struct iommu_dev_data *dev_data; > + struct iommu_group *group; > u16 alias; > + int ret; > > if (dev->archdata.iommu) > return 0; > @@ -279,8 +281,30 @@ static int iommu_init_device(struct device *dev) > return -ENOTSUPP; > } > dev_data->alias_data = alias_data; > + > + dma_pdev = pci_get_bus_and_slot(alias>> 8, alias& 0xff); > + } else > + dma_pdev = pdev; > + > + if (!pdev->is_virtfn&& PCI_FUNC(pdev->devfn)&& iommu_group_mf&& > + pdev->hdr_type == PCI_HEADER_TYPE_NORMAL) > + dma_pdev = pci_get_slot(pdev->bus, > + PCI_DEVFN(PCI_SLOT(pdev->devfn), 0)); > + > + group = iommu_group_get(&dma_pdev->dev); > + if (!group) { > + group = iommu_group_alloc(); > + if (IS_ERR(group)) > + return PTR_ERR(group); > } > > + ret = iommu_group_add_device(group, dev); > + > + iommu_group_put(group); > + do you want to do a put if there is a failure in the iommu_group_add_device()? > + if (ret) > + return ret; > + > if (pci_iommuv2_capable(pdev)) { > struct amd_iommu *iommu; > > @@ -309,6 +333,8 @@ static void iommu_ignore_device(struct device *dev) > > static void iommu_uninit_device(struct device *dev) > { > + iommu_group_remove_device(dev); > + > /* > * Nothing to do here - we keep dev_data around for unplugged devices > * and reuse it when the device is re-plugged - not doing so would > diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c > index d4a0ff7..e63b33b 100644 > --- a/drivers/iommu/intel-iommu.c > +++ b/drivers/iommu/intel-iommu.c > @@ -4087,6 +4087,50 @@ static int intel_iommu_domain_has_cap(struct iommu_domain *domain, > return 0; > } > > +static int intel_iommu_add_device(struct device *dev) > +{ > + struct pci_dev *pdev = to_pci_dev(dev); > + struct pci_dev *bridge, *dma_pdev = pdev; > + struct iommu_group *group; > + int ret; > + > + if (!device_to_iommu(pci_domain_nr(pdev->bus), > + pdev->bus->number, pdev->devfn)) > + return -ENODEV; > + > + bridge = pci_find_upstream_pcie_bridge(pdev); > + if (bridge) { > + if (pci_is_pcie(bridge)) > + dma_pdev = pci_get_domain_bus_and_slot( > + pci_domain_nr(pdev->bus), > + bridge->subordinate->number, 0); > + else > + dma_pdev = bridge; > + } > + > + if (!pdev->is_virtfn&& PCI_FUNC(pdev->devfn)&& iommu_group_mf&& > + pdev->hdr_type == PCI_HEADER_TYPE_NORMAL) > + dma_pdev = pci_get_slot(pdev->bus, > + PCI_DEVFN(PCI_SLOT(pdev->devfn), 0)); > + > + group = iommu_group_get(&dma_pdev->dev); > + if (!group) { > + group = iommu_group_alloc(); > + if (IS_ERR(group)) > + return PTR_ERR(group); > + } > + > + ret = iommu_group_add_device(group, dev); > + ditto. > + iommu_group_put(group); > + return ret; > +} > + > +static void intel_iommu_remove_device(struct device *dev) > +{ > + iommu_group_remove_device(dev); > +} > + > static struct iommu_ops intel_iommu_ops = { > .domain_init = intel_iommu_domain_init, > .domain_destroy = intel_iommu_domain_destroy, > @@ -4096,6 +4140,8 @@ static struct iommu_ops intel_iommu_ops = { > .unmap = intel_iommu_unmap, > .iova_to_phys = intel_iommu_iova_to_phys, > .domain_has_cap = intel_iommu_domain_has_cap, > + .add_device = intel_iommu_add_device, > + .remove_device = intel_iommu_remove_device, > .pgsize_bitmap = INTEL_IOMMU_PGSIZES, > }; > >
On Thu, 2012-05-24 at 17:01 -0400, Don Dutile wrote: > On 05/22/2012 01:04 AM, Alex Williamson wrote: > > Add back group support for AMD& Intel. amd_iommu already tracks > > devices and has init and uninit routines to manage groups. > > intel-iommu does this on the fly, so we make use of the notifier > > support built into iommu groups to create and remove groups. > > > > Signed-off-by: Alex Williamson<alex.williamson@redhat.com> > > --- > > > > drivers/iommu/amd_iommu.c | 28 +++++++++++++++++++++++++- > > drivers/iommu/intel-iommu.c | 46 +++++++++++++++++++++++++++++++++++++++++++ > > 2 files changed, 73 insertions(+), 1 deletions(-) > > > > diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c > > index 32c00cd..b7e5ddf 100644 > > --- a/drivers/iommu/amd_iommu.c > > +++ b/drivers/iommu/amd_iommu.c > > @@ -256,9 +256,11 @@ static bool check_device(struct device *dev) > > > > static int iommu_init_device(struct device *dev) > > { > > - struct pci_dev *pdev = to_pci_dev(dev); > > + struct pci_dev *dma_pdev, *pdev = to_pci_dev(dev); > > struct iommu_dev_data *dev_data; > > + struct iommu_group *group; > > u16 alias; > > + int ret; > > > > if (dev->archdata.iommu) > > return 0; > > @@ -279,8 +281,30 @@ static int iommu_init_device(struct device *dev) > > return -ENOTSUPP; > > } > > dev_data->alias_data = alias_data; > > + > > + dma_pdev = pci_get_bus_and_slot(alias>> 8, alias& 0xff); > > + } else > > + dma_pdev = pdev; > > + > > + if (!pdev->is_virtfn&& PCI_FUNC(pdev->devfn)&& iommu_group_mf&& > > + pdev->hdr_type == PCI_HEADER_TYPE_NORMAL) > > + dma_pdev = pci_get_slot(pdev->bus, > > + PCI_DEVFN(PCI_SLOT(pdev->devfn), 0)); > > + > > + group = iommu_group_get(&dma_pdev->dev); > > + if (!group) { > > + group = iommu_group_alloc(); > > + if (IS_ERR(group)) > > + return PTR_ERR(group); > > } > > > > + ret = iommu_group_add_device(group, dev); > > + > > + iommu_group_put(group); > > + > do you want to do a put if there is a failure in the iommu_group_add_device()? Yes, this was intentional. iommu_group_alloc() adds a reference to the group it returns so that it doesn't disappear while we're working on it (documented in iommu.c). iommu_group_get() also gets a reference. So this put will free the group if it was new or just drop the reference if existing. Thanks, Alex > > + if (ret) > > + return ret; > > + > > if (pci_iommuv2_capable(pdev)) { > > struct amd_iommu *iommu; > > > > @@ -309,6 +333,8 @@ static void iommu_ignore_device(struct device *dev) > > > > static void iommu_uninit_device(struct device *dev) > > { > > + iommu_group_remove_device(dev); > > + > > /* > > * Nothing to do here - we keep dev_data around for unplugged devices > > * and reuse it when the device is re-plugged - not doing so would > > diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c > > index d4a0ff7..e63b33b 100644 > > --- a/drivers/iommu/intel-iommu.c > > +++ b/drivers/iommu/intel-iommu.c > > @@ -4087,6 +4087,50 @@ static int intel_iommu_domain_has_cap(struct iommu_domain *domain, > > return 0; > > } > > > > +static int intel_iommu_add_device(struct device *dev) > > +{ > > + struct pci_dev *pdev = to_pci_dev(dev); > > + struct pci_dev *bridge, *dma_pdev = pdev; > > + struct iommu_group *group; > > + int ret; > > + > > + if (!device_to_iommu(pci_domain_nr(pdev->bus), > > + pdev->bus->number, pdev->devfn)) > > + return -ENODEV; > > + > > + bridge = pci_find_upstream_pcie_bridge(pdev); > > + if (bridge) { > > + if (pci_is_pcie(bridge)) > > + dma_pdev = pci_get_domain_bus_and_slot( > > + pci_domain_nr(pdev->bus), > > + bridge->subordinate->number, 0); > > + else > > + dma_pdev = bridge; > > + } > > + > > + if (!pdev->is_virtfn&& PCI_FUNC(pdev->devfn)&& iommu_group_mf&& > > + pdev->hdr_type == PCI_HEADER_TYPE_NORMAL) > > + dma_pdev = pci_get_slot(pdev->bus, > > + PCI_DEVFN(PCI_SLOT(pdev->devfn), 0)); > > + > > + group = iommu_group_get(&dma_pdev->dev); > > + if (!group) { > > + group = iommu_group_alloc(); > > + if (IS_ERR(group)) > > + return PTR_ERR(group); > > + } > > + > > + ret = iommu_group_add_device(group, dev); > > + > ditto. > > + iommu_group_put(group); > > + return ret; > > +} > > + > > +static void intel_iommu_remove_device(struct device *dev) > > +{ > > + iommu_group_remove_device(dev); > > +} > > + > > static struct iommu_ops intel_iommu_ops = { > > .domain_init = intel_iommu_domain_init, > > .domain_destroy = intel_iommu_domain_destroy, > > @@ -4096,6 +4140,8 @@ static struct iommu_ops intel_iommu_ops = { > > .unmap = intel_iommu_unmap, > > .iova_to_phys = intel_iommu_iova_to_phys, > > .domain_has_cap = intel_iommu_domain_has_cap, > > + .add_device = intel_iommu_add_device, > > + .remove_device = intel_iommu_remove_device, > > .pgsize_bitmap = INTEL_IOMMU_PGSIZES, > > }; > > > > >
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c index 32c00cd..b7e5ddf 100644 --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -256,9 +256,11 @@ static bool check_device(struct device *dev) static int iommu_init_device(struct device *dev) { - struct pci_dev *pdev = to_pci_dev(dev); + struct pci_dev *dma_pdev, *pdev = to_pci_dev(dev); struct iommu_dev_data *dev_data; + struct iommu_group *group; u16 alias; + int ret; if (dev->archdata.iommu) return 0; @@ -279,8 +281,30 @@ static int iommu_init_device(struct device *dev) return -ENOTSUPP; } dev_data->alias_data = alias_data; + + dma_pdev = pci_get_bus_and_slot(alias >> 8, alias & 0xff); + } else + dma_pdev = pdev; + + if (!pdev->is_virtfn && PCI_FUNC(pdev->devfn) && iommu_group_mf && + pdev->hdr_type == PCI_HEADER_TYPE_NORMAL) + dma_pdev = pci_get_slot(pdev->bus, + PCI_DEVFN(PCI_SLOT(pdev->devfn), 0)); + + group = iommu_group_get(&dma_pdev->dev); + if (!group) { + group = iommu_group_alloc(); + if (IS_ERR(group)) + return PTR_ERR(group); } + ret = iommu_group_add_device(group, dev); + + iommu_group_put(group); + + if (ret) + return ret; + if (pci_iommuv2_capable(pdev)) { struct amd_iommu *iommu; @@ -309,6 +333,8 @@ static void iommu_ignore_device(struct device *dev) static void iommu_uninit_device(struct device *dev) { + iommu_group_remove_device(dev); + /* * Nothing to do here - we keep dev_data around for unplugged devices * and reuse it when the device is re-plugged - not doing so would diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index d4a0ff7..e63b33b 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -4087,6 +4087,50 @@ static int intel_iommu_domain_has_cap(struct iommu_domain *domain, return 0; } +static int intel_iommu_add_device(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct pci_dev *bridge, *dma_pdev = pdev; + struct iommu_group *group; + int ret; + + if (!device_to_iommu(pci_domain_nr(pdev->bus), + pdev->bus->number, pdev->devfn)) + return -ENODEV; + + bridge = pci_find_upstream_pcie_bridge(pdev); + if (bridge) { + if (pci_is_pcie(bridge)) + dma_pdev = pci_get_domain_bus_and_slot( + pci_domain_nr(pdev->bus), + bridge->subordinate->number, 0); + else + dma_pdev = bridge; + } + + if (!pdev->is_virtfn && PCI_FUNC(pdev->devfn) && iommu_group_mf && + pdev->hdr_type == PCI_HEADER_TYPE_NORMAL) + dma_pdev = pci_get_slot(pdev->bus, + PCI_DEVFN(PCI_SLOT(pdev->devfn), 0)); + + group = iommu_group_get(&dma_pdev->dev); + if (!group) { + group = iommu_group_alloc(); + if (IS_ERR(group)) + return PTR_ERR(group); + } + + ret = iommu_group_add_device(group, dev); + + iommu_group_put(group); + return ret; +} + +static void intel_iommu_remove_device(struct device *dev) +{ + iommu_group_remove_device(dev); +} + static struct iommu_ops intel_iommu_ops = { .domain_init = intel_iommu_domain_init, .domain_destroy = intel_iommu_domain_destroy, @@ -4096,6 +4140,8 @@ static struct iommu_ops intel_iommu_ops = { .unmap = intel_iommu_unmap, .iova_to_phys = intel_iommu_iova_to_phys, .domain_has_cap = intel_iommu_domain_has_cap, + .add_device = intel_iommu_add_device, + .remove_device = intel_iommu_remove_device, .pgsize_bitmap = INTEL_IOMMU_PGSIZES, };
Add back group support for AMD & Intel. amd_iommu already tracks devices and has init and uninit routines to manage groups. intel-iommu does this on the fly, so we make use of the notifier support built into iommu groups to create and remove groups. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> --- drivers/iommu/amd_iommu.c | 28 +++++++++++++++++++++++++- drivers/iommu/intel-iommu.c | 46 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 73 insertions(+), 1 deletions(-)