Message ID | 1aebb2401ecdeff9a85f9f19c981caacf0ed69d3.1446080991.git.jcody@redhat.com |
---|---|
State | New |
Headers | show |
On 10/28/2015 07:15 PM, Jeff Cody wrote: > Commit 934659c switched the iotests to run qemu and qemu-nbd from a bash > subshell, in order to catch segfaults. Unfortunately, this means the > process PID cannot be captured via '$!'. We stopped killing qemu and > qemu-nbd processes, leaving a lot of orphaned, running qemu processes > after executing iotests. > > Since the process is using exec in the subshell, the PID is the > same as the subshell PID. > > Track these PIDs for cleanup using pidfiles in the $TEST_DIR. Only > track the qemu PID, however, if requested - not all usage requires > killing the process. > > Reported-by: John Snow <jsnow@redhat.com> > Signed-off-by: Jeff Cody <jcody@redhat.com> > --- > tests/qemu-iotests/common.config | 14 ++++++++++++-- > tests/qemu-iotests/common.qemu | 17 +++++++++++------ > tests/qemu-iotests/common.rc | 6 +++--- > 3 files changed, 26 insertions(+), 11 deletions(-) > > diff --git a/tests/qemu-iotests/common.config b/tests/qemu-iotests/common.config > index 596bb2b..5fd4ca8 100644 > --- a/tests/qemu-iotests/common.config > +++ b/tests/qemu-iotests/common.config > @@ -44,6 +44,8 @@ export HOST_OPTIONS=${HOST_OPTIONS:=local.config} > export CHECK_OPTIONS=${CHECK_OPTIONS:="-g auto"} > export PWD=`pwd` > > +export _QEMU_HANDLE=0 > + > # $1 = prog to look for, $2* = default pathnames if not found in $PATH > set_prog_path() > { > @@ -105,7 +107,12 @@ fi > > _qemu_wrapper() > { > - (exec "$QEMU_PROG" $QEMU_OPTIONS "$@") > + ( > + if [ ! -z ${QEMU_NEED_PID} ]; then > + echo -n $BASHPID > "${TEST_DIR}/qemu-${_QEMU_HANDLE}.pid" 'echo -n' is a non-portable bashism; even in bash, it can be made to behave differently by 'set -o posix; shopt -s xpg_echo'. It's safer, and shorter, to use 'printf', if you don't need the newline. On the other hand, if you use plain 'echo', and include the newline,... > @@ -196,10 +194,17 @@ function _cleanup_qemu() > # QEMU_PID[], QEMU_IN[], QEMU_OUT[] all use same indices > for i in "${!QEMU_OUT[@]}" > do > - if [ -z "${wait}" ]; then > - kill -KILL ${QEMU_PID[$i]} 2>/dev/null > + local QEMU_PID > + if [ -f "${TEST_DIR}/qemu-${i}.pid" ]; then > + QEMU_PID=`cat "${TEST_DIR}/qemu-${i}.pid"` ...then you could avoid the subshell and useless use of cat here by doing: read QEMU_PID < "${TEST_DIR}/qemu-${i}.pid" > + rm -f "${TEST_DIR}/qemu-${i}.pid" > + fi > + if [ -z "${wait}" ] && [ ! -z ${QEMU_PID} ]; then Missing quotes around ${QEMU_PID}. But you got lucky: if it is empty, then you are evaluating [ ! -z ], which is false; where the intended [ ! -z "" ] would also be false. Still, it's bad form to abuse [] like that.
On Wed, Oct 28, 2015 at 10:08:42PM -0600, Eric Blake wrote: > On 10/28/2015 07:15 PM, Jeff Cody wrote: > > Commit 934659c switched the iotests to run qemu and qemu-nbd from a bash > > subshell, in order to catch segfaults. Unfortunately, this means the > > process PID cannot be captured via '$!'. We stopped killing qemu and > > qemu-nbd processes, leaving a lot of orphaned, running qemu processes > > after executing iotests. > > > > Since the process is using exec in the subshell, the PID is the > > same as the subshell PID. > > > > Track these PIDs for cleanup using pidfiles in the $TEST_DIR. Only > > track the qemu PID, however, if requested - not all usage requires > > killing the process. > > > > Reported-by: John Snow <jsnow@redhat.com> > > Signed-off-by: Jeff Cody <jcody@redhat.com> > > --- > > tests/qemu-iotests/common.config | 14 ++++++++++++-- > > tests/qemu-iotests/common.qemu | 17 +++++++++++------ > > tests/qemu-iotests/common.rc | 6 +++--- > > 3 files changed, 26 insertions(+), 11 deletions(-) > > > > diff --git a/tests/qemu-iotests/common.config b/tests/qemu-iotests/common.config > > index 596bb2b..5fd4ca8 100644 > > --- a/tests/qemu-iotests/common.config > > +++ b/tests/qemu-iotests/common.config > > @@ -44,6 +44,8 @@ export HOST_OPTIONS=${HOST_OPTIONS:=local.config} > > export CHECK_OPTIONS=${CHECK_OPTIONS:="-g auto"} > > export PWD=`pwd` > > > > +export _QEMU_HANDLE=0 > > + > > # $1 = prog to look for, $2* = default pathnames if not found in $PATH > > set_prog_path() > > { > > @@ -105,7 +107,12 @@ fi > > > > _qemu_wrapper() > > { > > - (exec "$QEMU_PROG" $QEMU_OPTIONS "$@") > > + ( > > + if [ ! -z ${QEMU_NEED_PID} ]; then > > + echo -n $BASHPID > "${TEST_DIR}/qemu-${_QEMU_HANDLE}.pid" > > 'echo -n' is a non-portable bashism; even in bash, it can be made to > behave differently by 'set -o posix; shopt -s xpg_echo'. It's safer, > and shorter, to use 'printf', if you don't need the newline. > > On the other hand, if you use plain 'echo', and include the newline,... > > > @@ -196,10 +194,17 @@ function _cleanup_qemu() > > # QEMU_PID[], QEMU_IN[], QEMU_OUT[] all use same indices > > for i in "${!QEMU_OUT[@]}" > > do > > - if [ -z "${wait}" ]; then > > - kill -KILL ${QEMU_PID[$i]} 2>/dev/null > > + local QEMU_PID > > + if [ -f "${TEST_DIR}/qemu-${i}.pid" ]; then > > + QEMU_PID=`cat "${TEST_DIR}/qemu-${i}.pid"` > > ...then you could avoid the subshell and useless use of cat here by doing: > > read QEMU_PID < "${TEST_DIR}/qemu-${i}.pid" > Yes, that would be better. > > + rm -f "${TEST_DIR}/qemu-${i}.pid" > > + fi > > + if [ -z "${wait}" ] && [ ! -z ${QEMU_PID} ]; then > > Missing quotes around ${QEMU_PID}. But you got lucky: if it is empty, > then you are evaluating [ ! -z ], which is false; where the intended [ ! > -z "" ] would also be false. Still, it's bad form to abuse [] like that. > Good catch, thanks.
diff --git a/tests/qemu-iotests/common.config b/tests/qemu-iotests/common.config index 596bb2b..5fd4ca8 100644 --- a/tests/qemu-iotests/common.config +++ b/tests/qemu-iotests/common.config @@ -44,6 +44,8 @@ export HOST_OPTIONS=${HOST_OPTIONS:=local.config} export CHECK_OPTIONS=${CHECK_OPTIONS:="-g auto"} export PWD=`pwd` +export _QEMU_HANDLE=0 + # $1 = prog to look for, $2* = default pathnames if not found in $PATH set_prog_path() { @@ -105,7 +107,12 @@ fi _qemu_wrapper() { - (exec "$QEMU_PROG" $QEMU_OPTIONS "$@") + ( + if [ ! -z ${QEMU_NEED_PID} ]; then + echo -n $BASHPID > "${TEST_DIR}/qemu-${_QEMU_HANDLE}.pid" + fi + exec "$QEMU_PROG" $QEMU_OPTIONS "$@" + ) } _qemu_img_wrapper() @@ -120,7 +127,10 @@ _qemu_io_wrapper() _qemu_nbd_wrapper() { - (exec "$QEMU_NBD_PROG" $QEMU_NBD_OPTIONS "$@") + ( + echo -n $BASHPID > "${TEST_DIR}/qemu-nbd.pid" + exec "$QEMU_NBD_PROG" $QEMU_NBD_OPTIONS "$@" + ) } export QEMU=_qemu_wrapper diff --git a/tests/qemu-iotests/common.qemu b/tests/qemu-iotests/common.qemu index e3faa53..bb108bd 100644 --- a/tests/qemu-iotests/common.qemu +++ b/tests/qemu-iotests/common.qemu @@ -30,8 +30,6 @@ QEMU_COMM_TIMEOUT=10 QEMU_FIFO_IN="${TEST_DIR}/qmp-in-$$" QEMU_FIFO_OUT="${TEST_DIR}/qmp-out-$$" -QEMU_PID= -_QEMU_HANDLE=0 QEMU_HANDLE=0 # If bash version is >= 4.1, these will be overwritten and dynamic @@ -153,11 +151,11 @@ function _launch_qemu() mkfifo "${fifo_out}" mkfifo "${fifo_in}" + QEMU_NEED_PID='y'\ ${QEMU} -nographic -serial none ${comm} -machine accel=qtest "${@}" \ >"${fifo_out}" \ 2>&1 \ <"${fifo_in}" & - QEMU_PID[${_QEMU_HANDLE}]=$! if [[ "${BASH_VERSINFO[0]}" -ge "5" || ("${BASH_VERSINFO[0]}" -ge "4" && "${BASH_VERSINFO[1]}" -ge "1") ]] @@ -196,10 +194,17 @@ function _cleanup_qemu() # QEMU_PID[], QEMU_IN[], QEMU_OUT[] all use same indices for i in "${!QEMU_OUT[@]}" do - if [ -z "${wait}" ]; then - kill -KILL ${QEMU_PID[$i]} 2>/dev/null + local QEMU_PID + if [ -f "${TEST_DIR}/qemu-${i}.pid" ]; then + QEMU_PID=`cat "${TEST_DIR}/qemu-${i}.pid"` + rm -f "${TEST_DIR}/qemu-${i}.pid" + fi + if [ -z "${wait}" ] && [ ! -z ${QEMU_PID} ]; then + kill -KILL ${QEMU_PID} 2>/dev/null + fi + if [ ! -z ${QEMU_PID} ]; then + wait ${QEMU_PID} 2>/dev/null # silent kill fi - wait ${QEMU_PID[$i]} 2>/dev/null # silent kill if [ -n "${wait}" ]; then cat <&${QEMU_OUT[$i]} | _filter_testdir | _filter_qemu \ | _filter_qemu_io | _filter_qmp diff --git a/tests/qemu-iotests/common.rc b/tests/qemu-iotests/common.rc index 28e4bea..84d2e98 100644 --- a/tests/qemu-iotests/common.rc +++ b/tests/qemu-iotests/common.rc @@ -154,7 +154,6 @@ _make_test_img() # Start an NBD server on the image file, which is what we'll be talking to if [ $IMGPROTO = "nbd" ]; then eval "$QEMU_NBD -v -t -b 127.0.0.1 -p 10810 -f $IMGFMT $TEST_IMG_FILE &" - QEMU_NBD_PID=$! sleep 1 # FIXME: qemu-nbd needs to be listening before we continue fi } @@ -175,8 +174,9 @@ _cleanup_test_img() case "$IMGPROTO" in nbd) - if [ -n "$QEMU_NBD_PID" ]; then - kill $QEMU_NBD_PID + if [ -f "${TEST_DIR}/qemu-nbd.pid" ]; then + kill `cat "${TEST_DIR}/qemu-nbd.pid"` + rm -f "${TEST_DIR}/qemu-nbd.pid" fi rm -f "$TEST_IMG_FILE" ;;
Commit 934659c switched the iotests to run qemu and qemu-nbd from a bash subshell, in order to catch segfaults. Unfortunately, this means the process PID cannot be captured via '$!'. We stopped killing qemu and qemu-nbd processes, leaving a lot of orphaned, running qemu processes after executing iotests. Since the process is using exec in the subshell, the PID is the same as the subshell PID. Track these PIDs for cleanup using pidfiles in the $TEST_DIR. Only track the qemu PID, however, if requested - not all usage requires killing the process. Reported-by: John Snow <jsnow@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> --- tests/qemu-iotests/common.config | 14 ++++++++++++-- tests/qemu-iotests/common.qemu | 17 +++++++++++------ tests/qemu-iotests/common.rc | 6 +++--- 3 files changed, 26 insertions(+), 11 deletions(-)