| Message ID | 1484112575-13194-2-git-send-email-peterx@redhat.com |
|---|---|
| State | New |
| Headers | show |
On Wed, Jan 11, 2017 at 01:29:34PM +0800, Peter Xu wrote: > We were using test.log before to keep all the test logs. This patch > creates one log file per test case under logs/ directory with name > "TESTNAME.log". Meanwhile, we will keep the last time log into > logs.old/. > > Renaming scripts/functions.bash into scripts/common.bash to store some > more global variables. > > Signed-off-by: Peter Xu <peterx@redhat.com> > --- > .gitignore | 3 ++- > Makefile | 5 ++--- > run_tests.sh | 18 +++++++++++------- > scripts/{functions.bash => common.bash} | 13 +++++++++++-- > scripts/mkstandalone.sh | 2 +- > 5 files changed, 27 insertions(+), 14 deletions(-) > rename scripts/{functions.bash => common.bash} (75%) > > diff --git a/.gitignore b/.gitignore > index 3155418..2213b9b 100644 > --- a/.gitignore > +++ b/.gitignore > @@ -12,7 +12,8 @@ cscope.* > /lib/asm > /config.mak > /*-run > -/test.log > /msr.out > /tests > /build-head > +/logs/ > +/logs.old/ We should send a cleanup patch fixing the other dirs too someday, patches, /lib/asm, and /tests > diff --git a/Makefile b/Makefile > index a32333b..844bacc 100644 > --- a/Makefile > +++ b/Makefile > @@ -94,9 +94,8 @@ libfdt_clean: > $(LIBFDT_objdir)/.*.d > > distclean: clean libfdt_clean > - $(RM) lib/asm config.mak $(TEST_DIR)-run test.log msr.out cscope.* \ > - build-head > - $(RM) -r tests > + $(RM) lib/asm config.mak $(TEST_DIR)-run msr.out cscope.* build-head > + $(RM) -r tests logs logs.old > > cscope: cscope_dirs = lib lib/libfdt lib/linux $(TEST_DIR) $(ARCH_LIBDIRS) lib/asm-generic > cscope: > diff --git a/run_tests.sh b/run_tests.sh > index 254129d..b6a1059 100755 > --- a/run_tests.sh > +++ b/run_tests.sh > @@ -7,7 +7,7 @@ if [ ! -f config.mak ]; then > exit 1 > fi > source config.mak > -source scripts/functions.bash > +source scripts/common.bash > > function usage() > { > @@ -46,17 +46,21 @@ while getopts "g:hv" opt; do > esac > done > > -RUNTIME_log_stderr () { cat >> test.log; } > +# RUNTIME_log_file will be configured later > +RUNTIME_log_stderr () { cat >> $RUNTIME_log_file; } > RUNTIME_log_stdout () { > if [ "$PRETTY_PRINT_STACKS" = "yes" ]; then > - ./scripts/pretty_print_stacks.py $1 >> test.log > + ./scripts/pretty_print_stacks.py $1 >> $RUNTIME_log_file > else > - cat >> test.log > + cat >> $RUNTIME_log_file > fi > } > > - > config=$TEST_DIR/unittests.cfg > -rm -f test.log > -printf "BUILD_HEAD=$(cat build-head)\n\n" > test.log > + > +rm -rf $unittest_log_dir.old > +mv $unittest_log_dir $unittest_log_dir.old > +mkdir $unittest_log_dir > +echo "BUILD_HEAD=$(cat build-head)" > $unittest_log_dir/SUMMARY > + > for_each_unittest $config run > diff --git a/scripts/functions.bash b/scripts/common.bash > similarity index 75% > rename from scripts/functions.bash > rename to scripts/common.bash > index ee9143c..2dd7360 100644 > --- a/scripts/functions.bash > +++ b/scripts/common.bash > @@ -1,3 +1,12 @@ > +: ${unittest_log_dir:=logs} > + > +function run_task() > +{ > + local testname="$2" > + > + RUNTIME_log_file="${unittest_log_dir}/${testname}.log" > + "$@" > +} > > function for_each_unittest() > { > @@ -17,7 +26,7 @@ function for_each_unittest() > > while read -u $fd line; do > if [[ "$line" =~ ^\[(.*)\]$ ]]; then > - "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout" > + run_task "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout" > testname=${BASH_REMATCH[1]} > smp=1 > kernel="" > @@ -45,6 +54,6 @@ function for_each_unittest() > timeout=${BASH_REMATCH[1]} > fi > done > - "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout" > + run_task "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout" > exec {fd}<&- > } > diff --git a/scripts/mkstandalone.sh b/scripts/mkstandalone.sh > index d2bae19..3c1938e 100755 > --- a/scripts/mkstandalone.sh > +++ b/scripts/mkstandalone.sh > @@ -5,7 +5,7 @@ if [ ! -f config.mak ]; then > exit 1 > fi > source config.mak > -source scripts/functions.bash > +source scripts/common.bash > > escape () > { > -- > 2.7.4 > > Reviewed-by: Andrew Jones <drjones@redhat.com>
On Wed, Jan 11, 2017 at 10:06:07AM +0100, Andrew Jones wrote: > On Wed, Jan 11, 2017 at 01:29:34PM +0800, Peter Xu wrote: > > We were using test.log before to keep all the test logs. This patch > > creates one log file per test case under logs/ directory with name > > "TESTNAME.log". Meanwhile, we will keep the last time log into > > logs.old/. > > > > Renaming scripts/functions.bash into scripts/common.bash to store some > > more global variables. > > > > Signed-off-by: Peter Xu <peterx@redhat.com> > > --- > > .gitignore | 3 ++- > > Makefile | 5 ++--- > > run_tests.sh | 18 +++++++++++------- > > scripts/{functions.bash => common.bash} | 13 +++++++++++-- > > scripts/mkstandalone.sh | 2 +- > > 5 files changed, 27 insertions(+), 14 deletions(-) > > rename scripts/{functions.bash => common.bash} (75%) > > > > diff --git a/.gitignore b/.gitignore > > index 3155418..2213b9b 100644 > > --- a/.gitignore > > +++ b/.gitignore > > @@ -12,7 +12,8 @@ cscope.* > > /lib/asm > > /config.mak > > /*-run > > -/test.log > > /msr.out > > /tests > > /build-head > > +/logs/ > > +/logs.old/ > > We should send a cleanup patch fixing the other dirs too someday, > patches, /lib/asm, and /tests > > > diff --git a/Makefile b/Makefile > > index a32333b..844bacc 100644 > > --- a/Makefile > > +++ b/Makefile > > @@ -94,9 +94,8 @@ libfdt_clean: > > $(LIBFDT_objdir)/.*.d > > > > distclean: clean libfdt_clean > > - $(RM) lib/asm config.mak $(TEST_DIR)-run test.log msr.out cscope.* \ > > - build-head > > - $(RM) -r tests > > + $(RM) lib/asm config.mak $(TEST_DIR)-run msr.out cscope.* build-head > > + $(RM) -r tests logs logs.old > > > > cscope: cscope_dirs = lib lib/libfdt lib/linux $(TEST_DIR) $(ARCH_LIBDIRS) lib/asm-generic > > cscope: > > diff --git a/run_tests.sh b/run_tests.sh > > index 254129d..b6a1059 100755 > > --- a/run_tests.sh > > +++ b/run_tests.sh > > @@ -7,7 +7,7 @@ if [ ! -f config.mak ]; then > > exit 1 > > fi > > source config.mak > > -source scripts/functions.bash > > +source scripts/common.bash > > > > function usage() > > { > > @@ -46,17 +46,21 @@ while getopts "g:hv" opt; do > > esac > > done > > > > -RUNTIME_log_stderr () { cat >> test.log; } > > +# RUNTIME_log_file will be configured later > > +RUNTIME_log_stderr () { cat >> $RUNTIME_log_file; } > > RUNTIME_log_stdout () { > > if [ "$PRETTY_PRINT_STACKS" = "yes" ]; then > > - ./scripts/pretty_print_stacks.py $1 >> test.log > > + ./scripts/pretty_print_stacks.py $1 >> $RUNTIME_log_file > > else > > - cat >> test.log > > + cat >> $RUNTIME_log_file > > fi > > } > > > > - > > config=$TEST_DIR/unittests.cfg > > -rm -f test.log > > -printf "BUILD_HEAD=$(cat build-head)\n\n" > test.log > > + > > +rm -rf $unittest_log_dir.old > > +mv $unittest_log_dir $unittest_log_dir.old Actually this mv can fail, but we definitely wouldn't want to error-out like v4 did, we want to ignore it. The error is that /logs doesn't exist, as it won't the first time run_tests.sh is run. So, we need to redirect stderr to /dev/null on this mv to avoid the message "mv: cannot stat 'logs': No such file or directory" on that first run. Thanks, drew > > +mkdir $unittest_log_dir > > +echo "BUILD_HEAD=$(cat build-head)" > $unittest_log_dir/SUMMARY > > + > > for_each_unittest $config run > > diff --git a/scripts/functions.bash b/scripts/common.bash > > similarity index 75% > > rename from scripts/functions.bash > > rename to scripts/common.bash > > index ee9143c..2dd7360 100644 > > --- a/scripts/functions.bash > > +++ b/scripts/common.bash > > @@ -1,3 +1,12 @@ > > +: ${unittest_log_dir:=logs} > > + > > +function run_task() > > +{ > > + local testname="$2" > > + > > + RUNTIME_log_file="${unittest_log_dir}/${testname}.log" > > + "$@" > > +} > > > > function for_each_unittest() > > { > > @@ -17,7 +26,7 @@ function for_each_unittest() > > > > while read -u $fd line; do > > if [[ "$line" =~ ^\[(.*)\]$ ]]; then > > - "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout" > > + run_task "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout" > > testname=${BASH_REMATCH[1]} > > smp=1 > > kernel="" > > @@ -45,6 +54,6 @@ function for_each_unittest() > > timeout=${BASH_REMATCH[1]} > > fi > > done > > - "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout" > > + run_task "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout" > > exec {fd}<&- > > } > > diff --git a/scripts/mkstandalone.sh b/scripts/mkstandalone.sh > > index d2bae19..3c1938e 100755 > > --- a/scripts/mkstandalone.sh > > +++ b/scripts/mkstandalone.sh > > @@ -5,7 +5,7 @@ if [ ! -f config.mak ]; then > > exit 1 > > fi > > source config.mak > > -source scripts/functions.bash > > +source scripts/common.bash > > > > escape () > > { > > -- > > 2.7.4 > > > > > > Reviewed-by: Andrew Jones <drjones@redhat.com> > -- > To unsubscribe from this list: send the line "unsubscribe kvm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Jan 11, 2017 at 10:51:12AM +0100, Andrew Jones wrote: > On Wed, Jan 11, 2017 at 10:06:07AM +0100, Andrew Jones wrote: > > On Wed, Jan 11, 2017 at 01:29:34PM +0800, Peter Xu wrote: > > > We were using test.log before to keep all the test logs. This patch > > > creates one log file per test case under logs/ directory with name > > > "TESTNAME.log". Meanwhile, we will keep the last time log into > > > logs.old/. > > > > > > Renaming scripts/functions.bash into scripts/common.bash to store some > > > more global variables. > > > > > > Signed-off-by: Peter Xu <peterx@redhat.com> > > > --- > > > .gitignore | 3 ++- > > > Makefile | 5 ++--- > > > run_tests.sh | 18 +++++++++++------- > > > scripts/{functions.bash => common.bash} | 13 +++++++++++-- > > > scripts/mkstandalone.sh | 2 +- > > > 5 files changed, 27 insertions(+), 14 deletions(-) > > > rename scripts/{functions.bash => common.bash} (75%) > > > > > > diff --git a/.gitignore b/.gitignore > > > index 3155418..2213b9b 100644 > > > --- a/.gitignore > > > +++ b/.gitignore > > > @@ -12,7 +12,8 @@ cscope.* > > > /lib/asm > > > /config.mak > > > /*-run > > > -/test.log > > > /msr.out > > > /tests > > > /build-head > > > +/logs/ > > > +/logs.old/ > > > > We should send a cleanup patch fixing the other dirs too someday, > > patches, /lib/asm, and /tests > > > > > diff --git a/Makefile b/Makefile > > > index a32333b..844bacc 100644 > > > --- a/Makefile > > > +++ b/Makefile > > > @@ -94,9 +94,8 @@ libfdt_clean: > > > $(LIBFDT_objdir)/.*.d > > > > > > distclean: clean libfdt_clean > > > - $(RM) lib/asm config.mak $(TEST_DIR)-run test.log msr.out cscope.* \ > > > - build-head > > > - $(RM) -r tests > > > + $(RM) lib/asm config.mak $(TEST_DIR)-run msr.out cscope.* build-head > > > + $(RM) -r tests logs logs.old > > > > > > cscope: cscope_dirs = lib lib/libfdt lib/linux $(TEST_DIR) $(ARCH_LIBDIRS) lib/asm-generic > > > cscope: > > > diff --git a/run_tests.sh b/run_tests.sh > > > index 254129d..b6a1059 100755 > > > --- a/run_tests.sh > > > +++ b/run_tests.sh > > > @@ -7,7 +7,7 @@ if [ ! -f config.mak ]; then > > > exit 1 > > > fi > > > source config.mak > > > -source scripts/functions.bash > > > +source scripts/common.bash > > > > > > function usage() > > > { > > > @@ -46,17 +46,21 @@ while getopts "g:hv" opt; do > > > esac > > > done > > > > > > -RUNTIME_log_stderr () { cat >> test.log; } > > > +# RUNTIME_log_file will be configured later > > > +RUNTIME_log_stderr () { cat >> $RUNTIME_log_file; } > > > RUNTIME_log_stdout () { > > > if [ "$PRETTY_PRINT_STACKS" = "yes" ]; then > > > - ./scripts/pretty_print_stacks.py $1 >> test.log > > > + ./scripts/pretty_print_stacks.py $1 >> $RUNTIME_log_file > > > else > > > - cat >> test.log > > > + cat >> $RUNTIME_log_file > > > fi > > > } > > > > > > - > > > config=$TEST_DIR/unittests.cfg > > > -rm -f test.log > > > -printf "BUILD_HEAD=$(cat build-head)\n\n" > test.log > > > + > > > +rm -rf $unittest_log_dir.old > > > +mv $unittest_log_dir $unittest_log_dir.old > > Actually this mv can fail, but we definitely wouldn't want to error-out > like v4 did, we want to ignore it. The error is that /logs doesn't exist, > as it won't the first time run_tests.sh is run. So, we need to redirect > stderr to /dev/null on this mv to avoid the message > "mv: cannot stat 'logs': No such file or directory" > on that first run. Hmm, yes. After a second thought, I think the mv can still fail even if this is not the first time we run the script - e.g. if the directory belongs to user1 but user2 runs run_tests.sh under it (while user2 don't have write permission on this directory). So I think we still need some way to stop the script if we detected that we might encounter issue. We can do explicit check before the mv, making sure that the directory is there. So, how about this: rm -rf $unittest_log_dir.old || err "Failed remove old logs" if [[ -d $unittest_log_dir ]]; then mv $unittest_log_dir $unittest_log_dir.old || err "Failed backup logs" fi mkdir $unittest_log_dir || err "Failed to create log dir" And define err() in common.bash: function err() { echo "$@" exit 1 } -- peterx
On Wed, Jan 11, 2017 at 06:12:44PM +0800, Peter Xu wrote: > On Wed, Jan 11, 2017 at 10:51:12AM +0100, Andrew Jones wrote: > > On Wed, Jan 11, 2017 at 10:06:07AM +0100, Andrew Jones wrote: > > > On Wed, Jan 11, 2017 at 01:29:34PM +0800, Peter Xu wrote: > > > > We were using test.log before to keep all the test logs. This patch > > > > creates one log file per test case under logs/ directory with name > > > > "TESTNAME.log". Meanwhile, we will keep the last time log into > > > > logs.old/. > > > > > > > > Renaming scripts/functions.bash into scripts/common.bash to store some > > > > more global variables. > > > > > > > > Signed-off-by: Peter Xu <peterx@redhat.com> > > > > --- > > > > .gitignore | 3 ++- > > > > Makefile | 5 ++--- > > > > run_tests.sh | 18 +++++++++++------- > > > > scripts/{functions.bash => common.bash} | 13 +++++++++++-- > > > > scripts/mkstandalone.sh | 2 +- > > > > 5 files changed, 27 insertions(+), 14 deletions(-) > > > > rename scripts/{functions.bash => common.bash} (75%) > > > > > > > > diff --git a/.gitignore b/.gitignore > > > > index 3155418..2213b9b 100644 > > > > --- a/.gitignore > > > > +++ b/.gitignore > > > > @@ -12,7 +12,8 @@ cscope.* > > > > /lib/asm > > > > /config.mak > > > > /*-run > > > > -/test.log > > > > /msr.out > > > > /tests > > > > /build-head > > > > +/logs/ > > > > +/logs.old/ > > > > > > We should send a cleanup patch fixing the other dirs too someday, > > > patches, /lib/asm, and /tests > > > > > > > diff --git a/Makefile b/Makefile > > > > index a32333b..844bacc 100644 > > > > --- a/Makefile > > > > +++ b/Makefile > > > > @@ -94,9 +94,8 @@ libfdt_clean: > > > > $(LIBFDT_objdir)/.*.d > > > > > > > > distclean: clean libfdt_clean > > > > - $(RM) lib/asm config.mak $(TEST_DIR)-run test.log msr.out cscope.* \ > > > > - build-head > > > > - $(RM) -r tests > > > > + $(RM) lib/asm config.mak $(TEST_DIR)-run msr.out cscope.* build-head > > > > + $(RM) -r tests logs logs.old > > > > > > > > cscope: cscope_dirs = lib lib/libfdt lib/linux $(TEST_DIR) $(ARCH_LIBDIRS) lib/asm-generic > > > > cscope: > > > > diff --git a/run_tests.sh b/run_tests.sh > > > > index 254129d..b6a1059 100755 > > > > --- a/run_tests.sh > > > > +++ b/run_tests.sh > > > > @@ -7,7 +7,7 @@ if [ ! -f config.mak ]; then > > > > exit 1 > > > > fi > > > > source config.mak > > > > -source scripts/functions.bash > > > > +source scripts/common.bash > > > > > > > > function usage() > > > > { > > > > @@ -46,17 +46,21 @@ while getopts "g:hv" opt; do > > > > esac > > > > done > > > > > > > > -RUNTIME_log_stderr () { cat >> test.log; } > > > > +# RUNTIME_log_file will be configured later > > > > +RUNTIME_log_stderr () { cat >> $RUNTIME_log_file; } > > > > RUNTIME_log_stdout () { > > > > if [ "$PRETTY_PRINT_STACKS" = "yes" ]; then > > > > - ./scripts/pretty_print_stacks.py $1 >> test.log > > > > + ./scripts/pretty_print_stacks.py $1 >> $RUNTIME_log_file > > > > else > > > > - cat >> test.log > > > > + cat >> $RUNTIME_log_file > > > > fi > > > > } > > > > > > > > - > > > > config=$TEST_DIR/unittests.cfg > > > > -rm -f test.log > > > > -printf "BUILD_HEAD=$(cat build-head)\n\n" > test.log > > > > + > > > > +rm -rf $unittest_log_dir.old > > > > +mv $unittest_log_dir $unittest_log_dir.old > > > > Actually this mv can fail, but we definitely wouldn't want to error-out > > like v4 did, we want to ignore it. The error is that /logs doesn't exist, > > as it won't the first time run_tests.sh is run. So, we need to redirect > > stderr to /dev/null on this mv to avoid the message > > "mv: cannot stat 'logs': No such file or directory" > > on that first run. > > Hmm, yes. > > After a second thought, I think the mv can still fail even if this is > not the first time we run the script - e.g. if the directory belongs > to user1 but user2 runs run_tests.sh under it (while user2 don't have > write permission on this directory). So I think we still need some way > to stop the script if we detected that we might encounter issue. I'm not really concerned about the user1/user2 scenario. The general use of kvm-unit-tests is to build and run, meaning the user must have write access to the dir in order to compile. But, ignoring the errors, as I suggested, probably isn't a great idea either... > > We can do explicit check before the mv, making sure that the directory > is there. > > So, how about this: > > rm -rf $unittest_log_dir.old || err "Failed remove old logs" > if [[ -d $unittest_log_dir ]]; then Only [ ... ] for tests like these > mv $unittest_log_dir $unittest_log_dir.old || > err "Failed backup logs" > fi > mkdir $unittest_log_dir || err "Failed to create log dir" > > And define err() in common.bash: > > function err() > { > echo "$@" > exit 1 > } The above is mostly just translating rm/mv/mkdir stderr messages to new messages. We can do it much more simply like rm -rf logs.old [ -d logs ] && mv logs logs.old mkdir logs || exit 2 Thanks, drew
On Wed, Jan 11, 2017 at 11:46:38AM +0100, Andrew Jones wrote: [...] > > So, how about this: > > > > rm -rf $unittest_log_dir.old || err "Failed remove old logs" > > if [[ -d $unittest_log_dir ]]; then > > Only [ ... ] for tests like these I thought [[ ... ]] would be superior to [ ... ] if we are not considering the POSIX compatibility issue? Hmm, after a quick grep, I see that kvm-unit-tests repo is using [[ ... ]] only if doing any kind of pattern/regex matching, right? If so, I'll just follow. ;-) > > > mv $unittest_log_dir $unittest_log_dir.old || > > err "Failed backup logs" > > fi > > mkdir $unittest_log_dir || err "Failed to create log dir" > > > > And define err() in common.bash: > > > > function err() > > { > > echo "$@" > > exit 1 > > } > > The above is mostly just translating rm/mv/mkdir stderr messages to > new messages. We can do it much more simply like > > rm -rf logs.old > [ -d logs ] && mv logs logs.old > mkdir logs || exit 2 Okay I'll use this. Thanks! -- peterx
diff --git a/.gitignore b/.gitignore index 3155418..2213b9b 100644 --- a/.gitignore +++ b/.gitignore @@ -12,7 +12,8 @@ cscope.* /lib/asm /config.mak /*-run -/test.log /msr.out /tests /build-head +/logs/ +/logs.old/ diff --git a/Makefile b/Makefile index a32333b..844bacc 100644 --- a/Makefile +++ b/Makefile @@ -94,9 +94,8 @@ libfdt_clean: $(LIBFDT_objdir)/.*.d distclean: clean libfdt_clean - $(RM) lib/asm config.mak $(TEST_DIR)-run test.log msr.out cscope.* \ - build-head - $(RM) -r tests + $(RM) lib/asm config.mak $(TEST_DIR)-run msr.out cscope.* build-head + $(RM) -r tests logs logs.old cscope: cscope_dirs = lib lib/libfdt lib/linux $(TEST_DIR) $(ARCH_LIBDIRS) lib/asm-generic cscope: diff --git a/run_tests.sh b/run_tests.sh index 254129d..b6a1059 100755 --- a/run_tests.sh +++ b/run_tests.sh @@ -7,7 +7,7 @@ if [ ! -f config.mak ]; then exit 1 fi source config.mak -source scripts/functions.bash +source scripts/common.bash function usage() { @@ -46,17 +46,21 @@ while getopts "g:hv" opt; do esac done -RUNTIME_log_stderr () { cat >> test.log; } +# RUNTIME_log_file will be configured later +RUNTIME_log_stderr () { cat >> $RUNTIME_log_file; } RUNTIME_log_stdout () { if [ "$PRETTY_PRINT_STACKS" = "yes" ]; then - ./scripts/pretty_print_stacks.py $1 >> test.log + ./scripts/pretty_print_stacks.py $1 >> $RUNTIME_log_file else - cat >> test.log + cat >> $RUNTIME_log_file fi } - config=$TEST_DIR/unittests.cfg -rm -f test.log -printf "BUILD_HEAD=$(cat build-head)\n\n" > test.log + +rm -rf $unittest_log_dir.old +mv $unittest_log_dir $unittest_log_dir.old +mkdir $unittest_log_dir +echo "BUILD_HEAD=$(cat build-head)" > $unittest_log_dir/SUMMARY + for_each_unittest $config run diff --git a/scripts/functions.bash b/scripts/common.bash similarity index 75% rename from scripts/functions.bash rename to scripts/common.bash index ee9143c..2dd7360 100644 --- a/scripts/functions.bash +++ b/scripts/common.bash @@ -1,3 +1,12 @@ +: ${unittest_log_dir:=logs} + +function run_task() +{ + local testname="$2" + + RUNTIME_log_file="${unittest_log_dir}/${testname}.log" + "$@" +} function for_each_unittest() { @@ -17,7 +26,7 @@ function for_each_unittest() while read -u $fd line; do if [[ "$line" =~ ^\[(.*)\]$ ]]; then - "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout" + run_task "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout" testname=${BASH_REMATCH[1]} smp=1 kernel="" @@ -45,6 +54,6 @@ function for_each_unittest() timeout=${BASH_REMATCH[1]} fi done - "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout" + run_task "$cmd" "$testname" "$groups" "$smp" "$kernel" "$opts" "$arch" "$check" "$accel" "$timeout" exec {fd}<&- } diff --git a/scripts/mkstandalone.sh b/scripts/mkstandalone.sh index d2bae19..3c1938e 100755 --- a/scripts/mkstandalone.sh +++ b/scripts/mkstandalone.sh @@ -5,7 +5,7 @@ if [ ! -f config.mak ]; then exit 1 fi source config.mak -source scripts/functions.bash +source scripts/common.bash escape () {
We were using test.log before to keep all the test logs. This patch creates one log file per test case under logs/ directory with name "TESTNAME.log". Meanwhile, we will keep the last time log into logs.old/. Renaming scripts/functions.bash into scripts/common.bash to store some more global variables. Signed-off-by: Peter Xu <peterx@redhat.com> --- .gitignore | 3 ++- Makefile | 5 ++--- run_tests.sh | 18 +++++++++++------- scripts/{functions.bash => common.bash} | 13 +++++++++++-- scripts/mkstandalone.sh | 2 +- 5 files changed, 27 insertions(+), 14 deletions(-) rename scripts/{functions.bash => common.bash} (75%)