@@ -1135,6 +1135,8 @@ static void intel_hda_realize(PCIDevice *pci, Error **errp)
{
IntelHDAState *d = INTEL_HDA(pci);
uint8_t *conf = d->pci.config;
+ Error *err = NULL;
+ int ret;
d->name = object_get_typename(OBJECT(d));
@@ -1143,13 +1145,27 @@ static void intel_hda_realize(PCIDevice *pci, Error **errp)
/* HDCTL off 0x40 bit 0 selects signaling mode (1-HDA, 0 - Ac97) 18.1.19 */
conf[0x40] = 0x01;
+ if (d->msi != ON_OFF_AUTO_OFF) {
+ ret = msi_init(&d->pci, d->old_msi_addr ? 0x50 : 0x60,
+ 1, true, false, &err);
+ /* Any error other than -ENOTSUP(board's MSI support is broken)
+ * is a programming error */
+ assert(!ret || ret == -ENOTSUP);
+ if (ret && d->msi == ON_OFF_AUTO_ON) {
+ /* Can't satisfy user's explicit msi=on request, fail */
+ error_append_hint(&err, "You have to use msi=auto (default) or "
+ "msi=off with this machine type.\n");
+ error_propagate(errp, err);
+ return;
+ }
+ assert(!err || d->msi == ON_OFF_AUTO_AUTO);
+ /* With msi=auto, we fall back to MSI off silently */
+ error_free(err);
+ }
+
memory_region_init_io(&d->mmio, OBJECT(d), &intel_hda_mmio_ops, d,
"intel-hda", 0x4000);
pci_register_bar(&d->pci, 0, 0, &d->mmio);
- if (d->msi != ON_OFF_AUTO_OFF) {
- /* TODO check for errors */
- msi_init(&d->pci, d->old_msi_addr ? 0x50 : 0x60, 1, true, false);
- }
hda_codec_bus_init(DEVICE(pci), &d->codecs, sizeof(d->codecs),
intel_hda_response, intel_hda_xfer);
@@ -68,7 +68,6 @@
#include <hw/isa/isa.h>
#include "sysemu/block-backend.h"
#include "sysemu/dma.h"
-
#include <hw/ide/pci.h>
#include <hw/ide/ahci.h>
@@ -111,6 +110,7 @@ static void pci_ich9_ahci_realize(PCIDevice *dev, Error **errp)
int sata_cap_offset;
uint8_t *sata_cap;
d = ICH_AHCI(dev);
+ int ret;
ahci_realize(&d->ahci, DEVICE(dev), pci_get_address_space(dev), 6);
@@ -146,7 +146,10 @@ static void pci_ich9_ahci_realize(PCIDevice *dev, Error **errp)
/* Although the AHCI 1.3 specification states that the first capability
* should be PMCAP, the Intel ICH9 data sheet specifies that the ICH9
* AHCI device puts the MSI capability first, pointing to 0x80. */
- msi_init(dev, ICH9_MSI_CAP_OFFSET, 1, true, false);
+ ret = msi_init(dev, ICH9_MSI_CAP_OFFSET, 1, true, false, NULL);
+ /* Any error other than -ENOTSUP(board's MSI support is broken)
+ * is a programming error. Fall back to INTx silently on -ENOTSUP */
+ assert(!ret || ret == -ENOTSUP);
}
static void pci_ich9_uninit(PCIDevice *dev)
@@ -268,13 +268,9 @@ e1000e_init_msi(E1000EState *s)
{
int res;
- res = msi_init(PCI_DEVICE(s),
- 0xD0, /* MSI capability offset */
- 1, /* MAC MSI interrupts */
- true, /* 64-bit message addresses supported */
- false); /* Per vector mask supported */
+ res = msi_init(PCI_DEVICE(s), 0xD0, 1, true, false, NULL);
- if (res > 0) {
+ if (!res) {
s->intr_state |= E1000E_USE_MSI;
} else {
trace_e1000e_msi_init_fail(res);
@@ -2197,27 +2197,6 @@ vmxnet3_cleanup_msix(VMXNET3State *s)
}
}
-#define VMXNET3_USE_64BIT (true)
-#define VMXNET3_PER_VECTOR_MASK (false)
-
-static bool
-vmxnet3_init_msi(VMXNET3State *s)
-{
- PCIDevice *d = PCI_DEVICE(s);
- int res;
-
- res = msi_init(d, VMXNET3_MSI_OFFSET(s), VMXNET3_MAX_NMSIX_INTRS,
- VMXNET3_USE_64BIT, VMXNET3_PER_VECTOR_MASK);
- if (0 > res) {
- VMW_WRPRN("Failed to initialize MSI, error %d", res);
- s->msi_used = false;
- } else {
- s->msi_used = true;
- }
-
- return s->msi_used;
-}
-
static void
vmxnet3_cleanup_msi(VMXNET3State *s)
{
@@ -2279,10 +2258,15 @@ static uint64_t vmxnet3_device_serial_num(VMXNET3State *s)
return dsn_payload;
}
+
+#define VMXNET3_USE_64BIT (true)
+#define VMXNET3_PER_VECTOR_MASK (false)
+
static void vmxnet3_pci_realize(PCIDevice *pci_dev, Error **errp)
{
DeviceState *dev = DEVICE(pci_dev);
VMXNET3State *s = VMXNET3(pci_dev);
+ int ret;
VMW_CBPRN("Starting init...");
@@ -2306,14 +2290,17 @@ static void vmxnet3_pci_realize(PCIDevice *pci_dev, Error **errp)
/* Interrupt pin A */
pci_dev->config[PCI_INTERRUPT_PIN] = 0x01;
+ ret = msi_init(pci_dev, VMXNET3_MSI_OFFSET(s), VMXNET3_MAX_NMSIX_INTRS,
+ VMXNET3_USE_64BIT, VMXNET3_PER_VECTOR_MASK, NULL);
+ /* Any error other than -ENOTSUP(board's MSI support is broken)
+ * is a programming error. Fall back to INTx silently on -ENOTSUP */
+ assert(!ret || ret == -ENOTSUP);
+ s->msi_used = !ret;
+
if (!vmxnet3_init_msix(s)) {
VMW_WRPRN("Failed to initialize MSI-X, configuration is inconsistent.");
}
- if (!vmxnet3_init_msi(s)) {
- VMW_WRPRN("Failed to initialize MSI, configuration is inconsistent.");
- }
-
vmxnet3_net_init(s);
if (pci_is_express(pci_dev)) {
@@ -25,6 +25,7 @@
#include "hw/pci/msi.h"
#include "hw/pci/pcie.h"
#include "ioh3420.h"
+#include "qapi/error.h"
#define PCI_DEVICE_ID_IOH_EPORT 0x3420 /* D0:F0 express mode */
#define PCI_DEVICE_ID_IOH_REV 0x2
@@ -97,6 +98,7 @@ static int ioh3420_initfn(PCIDevice *d)
PCIEPort *p = PCIE_PORT(d);
PCIESlot *s = PCIE_SLOT(d);
int rc;
+ Error *err = NULL;
pci_bridge_initfn(d, TYPE_PCIE_BUS);
pcie_port_init_reg(d);
@@ -109,8 +111,10 @@ static int ioh3420_initfn(PCIDevice *d)
rc = msi_init(d, IOH_EP_MSI_OFFSET, IOH_EP_MSI_NR_VECTOR,
IOH_EP_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_64BIT,
- IOH_EP_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_MASKBIT);
+ IOH_EP_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_MASKBIT, &err);
if (rc < 0) {
+ assert(rc == -ENOTSUP);
+ error_report_err(err);
goto err_bridge;
}
@@ -54,6 +54,7 @@ static int pci_bridge_dev_initfn(PCIDevice *dev)
PCIBridge *br = PCI_BRIDGE(dev);
PCIBridgeDev *bridge_dev = PCI_BRIDGE_DEV(dev);
int err;
+ Error *local_err = NULL;
pci_bridge_initfn(dev, TYPE_PCI_BUS);
@@ -75,12 +76,23 @@ static int pci_bridge_dev_initfn(PCIDevice *dev)
goto slotid_error;
}
- if (bridge_dev->msi != ON_OFF_AUTO_OFF &&
- msi_nonbroken) {
- err = msi_init(dev, 0, 1, true, true);
- if (err < 0) {
+ if (bridge_dev->msi != ON_OFF_AUTO_OFF) {
+ /* it means SHPC exists, because MSI is needed by SHPC */
+
+ err = msi_init(dev, 0, 1, true, true, &local_err);
+ /* Any error other than -ENOTSUP(board's MSI support is broken)
+ * is a programming error */
+ assert(!err || err == -ENOTSUP);
+ if (err && bridge_dev->msi == ON_OFF_AUTO_ON) {
+ /* Can't satisfy user's explicit msi=on request, fail */
+ error_append_hint(&local_err, "You have to use msi=auto (default) "
+ "or msi=off with this machine type.\n");
+ error_report_err(local_err);
goto msi_error;
}
+ assert(!local_err || bridge_dev->msi == ON_OFF_AUTO_AUTO);
+ /* With msi=auto, we fall back to MSI off silently */
+ error_free(local_err);
}
if (shpc_present(dev)) {
@@ -24,6 +24,7 @@
#include "hw/pci/msi.h"
#include "hw/pci/pcie.h"
#include "xio3130_downstream.h"
+#include "qapi/error.h"
#define PCI_DEVICE_ID_TI_XIO3130D 0x8233 /* downstream port */
#define XIO3130_REVISION 0x1
@@ -60,14 +61,17 @@ static int xio3130_downstream_initfn(PCIDevice *d)
PCIEPort *p = PCIE_PORT(d);
PCIESlot *s = PCIE_SLOT(d);
int rc;
+ Error *err = NULL;
pci_bridge_initfn(d, TYPE_PCIE_BUS);
pcie_port_init_reg(d);
rc = msi_init(d, XIO3130_MSI_OFFSET, XIO3130_MSI_NR_VECTOR,
XIO3130_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_64BIT,
- XIO3130_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_MASKBIT);
+ XIO3130_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_MASKBIT, &err);
if (rc < 0) {
+ assert(rc == -ENOTSUP);
+ error_report_err(err);
goto err_bridge;
}
@@ -24,6 +24,7 @@
#include "hw/pci/msi.h"
#include "hw/pci/pcie.h"
#include "xio3130_upstream.h"
+#include "qapi/error.h"
#define PCI_DEVICE_ID_TI_XIO3130U 0x8232 /* upstream port */
#define XIO3130_REVISION 0x2
@@ -56,14 +57,17 @@ static int xio3130_upstream_initfn(PCIDevice *d)
{
PCIEPort *p = PCIE_PORT(d);
int rc;
+ Error *err = NULL;
pci_bridge_initfn(d, TYPE_PCIE_BUS);
pcie_port_init_reg(d);
rc = msi_init(d, XIO3130_MSI_OFFSET, XIO3130_MSI_NR_VECTOR,
XIO3130_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_64BIT,
- XIO3130_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_MASKBIT);
+ XIO3130_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_MASKBIT, &err);
if (rc < 0) {
+ assert(rc == -ENOTSUP);
+ error_report_err(err);
goto err_bridge;
}
@@ -22,6 +22,7 @@
#include "hw/pci/msi.h"
#include "hw/xen/xen.h"
#include "qemu/range.h"
+#include "qapi/error.h"
/* PCI_MSI_ADDRESS_LO */
#define PCI_MSI_ADDRESS_LO_MASK (~0x3)
@@ -173,7 +174,8 @@ bool msi_enabled(const PCIDevice *dev)
* If @msi64bit, make the device capable of sending a 64-bit message
* address.
* If @msi_per_vector_mask, make the device support per-vector masking.
- * Return 0 on success, return -errno on error.
+ * @errp is for returning errors.
+ * Return 0 on success; set @errp and return -errno on error.
*
* -ENOTSUP means lacking msi support for a msi-capable platform.
* -EINVAL means capability overlap, happens when @offset is non-zero,
@@ -181,7 +183,8 @@ bool msi_enabled(const PCIDevice *dev)
* if a real HW is broken.
*/
int msi_init(struct PCIDevice *dev, uint8_t offset,
- unsigned int nr_vectors, bool msi64bit, bool msi_per_vector_mask)
+ unsigned int nr_vectors, bool msi64bit,
+ bool msi_per_vector_mask, Error **errp)
{
unsigned int vectors_order;
uint16_t flags;
@@ -189,6 +192,7 @@ int msi_init(struct PCIDevice *dev, uint8_t offset,
int config_offset;
if (!msi_nonbroken) {
+ error_setg(errp, "MSI is not supported by interrupt controller");
return -ENOTSUP;
}
@@ -212,7 +216,8 @@ int msi_init(struct PCIDevice *dev, uint8_t offset,
}
cap_size = msi_cap_sizeof(flags);
- config_offset = pci_add_capability(dev, PCI_CAP_ID_MSI, offset, cap_size);
+ config_offset = pci_add_capability2(dev, PCI_CAP_ID_MSI, offset,
+ cap_size, errp);
if (config_offset < 0) {
return config_offset;
}
@@ -29,7 +29,7 @@
#include "hw/scsi/scsi.h"
#include "block/scsi.h"
#include "trace.h"
-
+#include "qapi/error.h"
#include "mfi.h"
#define MEGASAS_VERSION_GEN1 "1.70"
@@ -2333,6 +2333,8 @@ static void megasas_scsi_realize(PCIDevice *dev, Error **errp)
MegasasBaseClass *b = MEGASAS_DEVICE_GET_CLASS(s);
uint8_t *pci_conf;
int i, bar_type;
+ Error *err = NULL;
+ int ret;
pci_conf = dev->config;
@@ -2341,6 +2343,24 @@ static void megasas_scsi_realize(PCIDevice *dev, Error **errp)
/* Interrupt pin 1 */
pci_conf[PCI_INTERRUPT_PIN] = 0x01;
+ if (megasas_use_msi(s)) {
+ ret = msi_init(dev, 0x50, 1, true, false, &err);
+ /* Any error other than -ENOTSUP(board's MSI support is broken)
+ * is a programming error */
+ assert(!ret || ret == -ENOTSUP);
+ if (ret && s->msi == ON_OFF_AUTO_ON) {
+ /* Can't satisfy user's explicit msi=on request, fail */
+ error_append_hint(&err, "You have to use msi=auto (default) or "
+ "msi=off with this machine type.\n");
+ error_propagate(errp, err);
+ return;
+ } else if (ret) {
+ /* With msi=auto, we fall back to MSI off silently */
+ s->msi = ON_OFF_AUTO_OFF;
+ error_free(err);
+ }
+ }
+
memory_region_init_io(&s->mmio_io, OBJECT(s), &megasas_mmio_ops, s,
"megasas-mmio", 0x4000);
memory_region_init_io(&s->port_io, OBJECT(s), &megasas_port_ops, s,
@@ -2348,10 +2368,6 @@ static void megasas_scsi_realize(PCIDevice *dev, Error **errp)
memory_region_init_io(&s->queue_io, OBJECT(s), &megasas_queue_ops, s,
"megasas-queue", 0x40000);
- if (megasas_use_msi(s) &&
- msi_init(dev, 0x50, 1, true, false)) {
- s->msi = ON_OFF_AUTO_OFF;
- }
if (megasas_use_msix(s) &&
msix_init(dev, 15, &s->mmio_io, b->mmio_bar, 0x2000,
&s->mmio_io, b->mmio_bar, 0x3800, 0x68)) {
@@ -32,7 +32,7 @@
#include "hw/scsi/scsi.h"
#include "block/scsi.h"
#include "trace.h"
-
+#include "qapi/error.h"
#include "mptsas.h"
#include "mpi.h"
@@ -1273,10 +1273,33 @@ static void mptsas_scsi_realize(PCIDevice *dev, Error **errp)
{
DeviceState *d = DEVICE(dev);
MPTSASState *s = MPT_SAS(dev);
+ Error *err = NULL;
+ int ret;
dev->config[PCI_LATENCY_TIMER] = 0;
dev->config[PCI_INTERRUPT_PIN] = 0x01;
+ if (s->msi != ON_OFF_AUTO_OFF) {
+ ret = msi_init(dev, 0, 1, true, false, &err);
+ /* Any error other than -ENOTSUP(board's MSI support is broken)
+ * is a programming error */
+ assert(!ret || ret == -ENOTSUP);
+ if (ret && s->msi == ON_OFF_AUTO_ON) {
+ /* Can't satisfy user's explicit msi=on request, fail */
+ error_append_hint(&err, "You have to use msi=auto (default) or "
+ "msi=off with this machine type.\n");
+ error_propagate(errp, err);
+ s->msi_in_use = false;
+ return;
+ } else if (ret) {
+ /* With msi=auto, we fall back to MSI off silently */
+ error_free(err);
+ s->msi_in_use = false;
+ } else {
+ s->msi_in_use = true;
+ }
+ }
+
memory_region_init_io(&s->mmio_io, OBJECT(s), &mptsas_mmio_ops, s,
"mptsas-mmio", 0x4000);
memory_region_init_io(&s->port_io, OBJECT(s), &mptsas_port_ops, s,
@@ -1284,12 +1307,6 @@ static void mptsas_scsi_realize(PCIDevice *dev, Error **errp)
memory_region_init_io(&s->diag_io, OBJECT(s), &mptsas_diag_ops, s,
"mptsas-diag", 0x10000);
- if (s->msi != ON_OFF_AUTO_OFF &&
- msi_init(dev, 0, 1, true, false) >= 0) {
- /* TODO check for errors */
- s->msi_in_use = true;
- }
-
pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &s->port_io);
pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_MEMORY |
PCI_BASE_ADDRESS_MEM_TYPE_32, &s->mmio_io);
@@ -1063,7 +1063,7 @@ pvscsi_init_msi(PVSCSIState *s)
PCIDevice *d = PCI_DEVICE(s);
res = msi_init(d, PVSCSI_MSI_OFFSET(s), PVSCSI_MSIX_NUM_VECTORS,
- PVSCSI_USE_64BIT, PVSCSI_PER_VECTOR_MASK);
+ PVSCSI_USE_64BIT, PVSCSI_PER_VECTOR_MASK, NULL);
if (res < 0) {
trace_pvscsi_init_msi_fail(res);
s->msi_used = false;
@@ -26,6 +26,7 @@
#include "hw/pci/msi.h"
#include "hw/pci/msix.h"
#include "trace.h"
+#include "qapi/error.h"
//#define DEBUG_XHCI
//#define DEBUG_DATA
@@ -3581,6 +3582,7 @@ static void usb_xhci_init(XHCIState *xhci)
static void usb_xhci_realize(struct PCIDevice *dev, Error **errp)
{
int i, ret;
+ Error *err = NULL;
XHCIState *xhci = XHCI(dev);
@@ -3591,6 +3593,23 @@ static void usb_xhci_realize(struct PCIDevice *dev, Error **errp)
usb_xhci_init(xhci);
+ if (xhci->msi != ON_OFF_AUTO_OFF) {
+ ret = msi_init(dev, 0x70, xhci->numintrs, true, false, &err);
+ /* Any error other than -ENOTSUP(board's MSI support is broken)
+ * is a programming error */
+ assert(!ret || ret == -ENOTSUP);
+ if (ret && xhci->msi == ON_OFF_AUTO_ON) {
+ /* Can't satisfy user's explicit msi=on request, fail */
+ error_append_hint(&err, "You have to use msi=auto (default) or "
+ "msi=off with this machine type.\n");
+ error_propagate(errp, err);
+ return;
+ }
+ assert(!err || xhci->msi == ON_OFF_AUTO_AUTO);
+ /* With msi=auto, we fall back to MSI off silently */
+ error_free(err);
+ }
+
if (xhci->numintrs > MAXINTRS) {
xhci->numintrs = MAXINTRS;
}
@@ -3648,10 +3667,6 @@ static void usb_xhci_realize(struct PCIDevice *dev, Error **errp)
assert(ret >= 0);
}
- if (xhci->msi != ON_OFF_AUTO_OFF) {
- /* TODO check for errors */
- msi_init(dev, 0x70, xhci->numintrs, true, false);
- }
if (xhci->msix != ON_OFF_AUTO_OFF) {
/* TODO check for errors */
msix_init(dev, xhci->numintrs,
@@ -31,6 +31,7 @@
#include "sysemu/sysemu.h"
#include "pci.h"
#include "trace.h"
+#include "qapi/error.h"
#define MSIX_CAP_LENGTH 12
@@ -1170,6 +1171,7 @@ static int vfio_msi_setup(VFIOPCIDevice *vdev, int pos)
uint16_t ctrl;
bool msi_64bit, msi_maskbit;
int ret, entries;
+ Error *err = NULL;
if (pread(vdev->vbasedev.fd, &ctrl, sizeof(ctrl),
vdev->config_offset + pos + PCI_CAP_FLAGS) != sizeof(ctrl)) {
@@ -1183,12 +1185,13 @@ static int vfio_msi_setup(VFIOPCIDevice *vdev, int pos)
trace_vfio_msi_setup(vdev->vbasedev.name, pos);
- ret = msi_init(&vdev->pdev, pos, entries, msi_64bit, msi_maskbit);
+ ret = msi_init(&vdev->pdev, pos, entries, msi_64bit, msi_maskbit, &err);
if (ret < 0) {
if (ret == -ENOTSUP) {
return 0;
}
- error_report("vfio: msi_init failed");
+ error_prepend(&err, "vfio: msi_init failed: ");
+ error_report_err(err);
return ret;
}
vdev->msi_cap_size = 0xa + (msi_maskbit ? 0xa : 0) + (msi_64bit ? 0x4 : 0);
@@ -35,7 +35,8 @@ void msi_set_message(PCIDevice *dev, MSIMessage msg);
MSIMessage msi_get_message(PCIDevice *dev, unsigned int vector);
bool msi_enabled(const PCIDevice *dev);
int msi_init(struct PCIDevice *dev, uint8_t offset,
- unsigned int nr_vectors, bool msi64bit, bool msi_per_vector_mask);
+ unsigned int nr_vectors, bool msi64bit,
+ bool msi_per_vector_mask, Error **errp);
void msi_uninit(struct PCIDevice *dev);
void msi_reset(PCIDevice *dev);
void msi_notify(PCIDevice *dev, unsigned int vector);