Message ID | 1448259825-3382-4-git-send-email-wency@cn.fujitsu.com |
---|---|
State | New |
Headers | show |
On 11/22/2015 11:23 PM, Wen Congyang wrote: > The new QMP command name is x-blockdev-change. It justs for adding/removing s/It justs/It's just/ > quorum's child now, and don't support all kinds of children, all kinds of s/don't/doesn't/ > operations, nor all block drivers. So it is experimental now. > > Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> > Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> > Signed-off-by: Gonglei <arei.gonglei@huawei.com> > --- > +++ b/qapi/block-core.json > @@ -2400,3 +2400,28 @@ > ## > { 'command': 'block-set-write-threshold', > 'data': { 'node-name': 'str', 'write-threshold': 'uint64' } } > + > +## > +# @x-blockdev-change > +# > +# Dynamically reconfigure the block driver state graph. It can be used > +# to add, remove, insert or replace a block driver state. Currently only > +# the Quorum driver implements this feature to add or remove its child. > +# This is useful to fix a broken quorum child. > +# > +# @operation: the change operation. It can be add, delete. Documented but not present below. Are you missing a parameter, or should this line be deleted? > +# > +# @parent: the id or name of the node that will be changed. > +# > +# @child: #optional the name of the child that will be deleted. > +# > +# @node: #optional the name of the node will be added. > +# > +# Note: this command is experimental, and its API is not stable. > +# > +# Since: 2.6 > +## > +{ 'command': 'x-blockdev-change', > + 'data' : { 'parent': 'str', > + '*child': 'str', > + '*node': 'str' } } > +++ b/qmp-commands.hx > @@ -4285,6 +4285,53 @@ Example: > EQMP > > { > + .name = "x-blockdev-change", > + .args_type = "parent:B,child:B?,node:B?", > + .mhandler.cmd_new = qmp_marshal_x_blockdev_change, > + }, > + > +SQMP > +x-blockdev-change > +------------ Make the --- divider as long as the text it is underlining. > + > +Dynamic reconfigure the block driver state graph. It can be used to s/Dynamic/Dynamically/ > +add, remove, insert, replace a block driver state. Currently only s/replace/or replace/ Isn't 'add' and 'insert' the same thing? > +the Quorum driver implements this feature to add and remove its child. > +This is useful to fix a broken quorum child. > + > +Arguments: > +- "parent": the id or node name of which node will be changed > +- "child": the child name which will be delete s/delete/deleted/; mention that it is optional (if nothing is going to be delted) > +- "node": the new node-name which will be added mention that it is optional (if nothing is going to be added) > + > +Note: this command is experimental, and not a stable API. It doesn't > +support all kinds of operations, all kindes of children, nor all block s/kindes/kinds/ > +drivers. > + > +Example: > + > +Add a new quorum's node s/quorum's node/node to a quorum/ > +-> { "execute": blockdev-add", > + "arguments": { "options": { "driver": "raw", > + "node-name": "new_node", > + "id": "test_new_node", > + "file": { "driver": "file", > + "filename": "test.raw" } } } } > +<- { "return": {} } > +-> { "execute": "x-blockdev-change", > + "arguments": { "parent": "disk1", > + "node": "new_node" } } > +<- { "return": {} } > + > +Delete a quorum's node > +-> { "execute": "x-blockdev-change", > + "arguments": { "parent": "disk1", > + "child": "children.2" } } > +<- { "return": {} } > + > +EQMP > + > + { > .name = "query-named-block-nodes", > .args_type = "", > .mhandler.cmd_new = qmp_marshal_query_named_block_nodes, >
On 11/24/2015 12:30 AM, Eric Blake wrote: > On 11/22/2015 11:23 PM, Wen Congyang wrote: >> The new QMP command name is x-blockdev-change. It justs for adding/removing > > s/It justs/It's just/ > >> quorum's child now, and don't support all kinds of children, all kinds of > > s/don't/doesn't/ > >> operations, nor all block drivers. So it is experimental now. >> >> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> >> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> >> Signed-off-by: Gonglei <arei.gonglei@huawei.com> >> --- > >> +++ b/qapi/block-core.json >> @@ -2400,3 +2400,28 @@ >> ## >> { 'command': 'block-set-write-threshold', >> 'data': { 'node-name': 'str', 'write-threshold': 'uint64' } } >> + >> +## >> +# @x-blockdev-change >> +# >> +# Dynamically reconfigure the block driver state graph. It can be used >> +# to add, remove, insert or replace a block driver state. Currently only >> +# the Quorum driver implements this feature to add or remove its child. >> +# This is useful to fix a broken quorum child. >> +# >> +# @operation: the change operation. It can be add, delete. > > Documented but not present below. Are you missing a parameter, or > should this line be deleted? This line should be deleted. > >> +# >> +# @parent: the id or name of the node that will be changed. >> +# >> +# @child: #optional the name of the child that will be deleted. >> +# >> +# @node: #optional the name of the node will be added. >> +# >> +# Note: this command is experimental, and its API is not stable. >> +# >> +# Since: 2.6 >> +## >> +{ 'command': 'x-blockdev-change', >> + 'data' : { 'parent': 'str', >> + '*child': 'str', >> + '*node': 'str' } } > >> +++ b/qmp-commands.hx >> @@ -4285,6 +4285,53 @@ Example: >> EQMP >> >> { >> + .name = "x-blockdev-change", >> + .args_type = "parent:B,child:B?,node:B?", >> + .mhandler.cmd_new = qmp_marshal_x_blockdev_change, >> + }, >> + >> +SQMP >> +x-blockdev-change >> +------------ > > Make the --- divider as long as the text it is underlining. OK > >> + >> +Dynamic reconfigure the block driver state graph. It can be used to > > s/Dynamic/Dynamically/ > >> +add, remove, insert, replace a block driver state. Currently only > > s/replace/or replace/ > > Isn't 'add' and 'insert' the same thing? 'insert' means that a filter driver is inserted betweean A and B(A is B's parent). > >> +the Quorum driver implements this feature to add and remove its child. >> +This is useful to fix a broken quorum child. >> + >> +Arguments: >> +- "parent": the id or node name of which node will be changed >> +- "child": the child name which will be delete > > s/delete/deleted/; mention that it is optional (if nothing is going to > be delted) > >> +- "node": the new node-name which will be added > > mention that it is optional (if nothing is going to be added) OK > >> + >> +Note: this command is experimental, and not a stable API. It doesn't >> +support all kinds of operations, all kindes of children, nor all block > > s/kindes/kinds/ > >> +drivers. >> + >> +Example: >> + >> +Add a new quorum's node > > s/quorum's node/node to a quorum/ All comments will be addressed. Thanks Wen Congyang > >> +-> { "execute": blockdev-add", >> + "arguments": { "options": { "driver": "raw", >> + "node-name": "new_node", >> + "id": "test_new_node", >> + "file": { "driver": "file", >> + "filename": "test.raw" } } } } >> +<- { "return": {} } >> +-> { "execute": "x-blockdev-change", >> + "arguments": { "parent": "disk1", >> + "node": "new_node" } } >> +<- { "return": {} } >> + >> +Delete a quorum's node >> +-> { "execute": "x-blockdev-change", >> + "arguments": { "parent": "disk1", >> + "child": "children.2" } } >> +<- { "return": {} } >> + >> +EQMP >> + >> + { >> .name = "query-named-block-nodes", >> .args_type = "", >> .mhandler.cmd_new = qmp_marshal_query_named_block_nodes, >> >
diff --git a/blockdev.c b/blockdev.c index 313841b..7736d84 100644 --- a/blockdev.c +++ b/blockdev.c @@ -3837,6 +3837,60 @@ out: aio_context_release(aio_context); } +static BlockDriverState *bdrv_find_child(BlockDriverState *parent_bs, + const char *child_name) +{ + BdrvChild *child; + + QLIST_FOREACH(child, &parent_bs->children, next) { + if (strcmp(child->name, child_name) == 0) { + return child->bs; + } + } + + return NULL; +} + +void qmp_x_blockdev_change(const char *parent, bool has_child, + const char *child, bool has_node, + const char *node, Error **errp) +{ + BlockDriverState *parent_bs, *child_bs = NULL, *new_bs = NULL; + + parent_bs = bdrv_lookup_bs(parent, parent, errp); + if (!parent_bs) { + return; + } + + if (has_child == has_node) { + if (has_child) { + error_setg(errp, "The paramter child and node is conflict"); + } else { + error_setg(errp, "Either child or node should be specified"); + } + return; + } + + if (has_child) { + child_bs = bdrv_find_child(parent_bs, child); + if (!child_bs) { + error_setg(errp, "Node '%s' doesn't have child %s", + parent, child); + return; + } + bdrv_del_child(parent_bs, child_bs, errp); + } + + if (has_node) { + new_bs = bdrv_find_node(node); + if (!new_bs) { + error_setg(errp, "Node '%s' not found", node); + return; + } + bdrv_add_child(parent_bs, new_bs, errp); + } +} + BlockJobInfoList *qmp_query_block_jobs(Error **errp) { BlockJobInfoList *head = NULL, **p_next = &head; diff --git a/qapi/block-core.json b/qapi/block-core.json index a07b13f..22fc2ee 100644 --- a/qapi/block-core.json +++ b/qapi/block-core.json @@ -2400,3 +2400,28 @@ ## { 'command': 'block-set-write-threshold', 'data': { 'node-name': 'str', 'write-threshold': 'uint64' } } + +## +# @x-blockdev-change +# +# Dynamically reconfigure the block driver state graph. It can be used +# to add, remove, insert or replace a block driver state. Currently only +# the Quorum driver implements this feature to add or remove its child. +# This is useful to fix a broken quorum child. +# +# @operation: the change operation. It can be add, delete. +# +# @parent: the id or name of the node that will be changed. +# +# @child: #optional the name of the child that will be deleted. +# +# @node: #optional the name of the node will be added. +# +# Note: this command is experimental, and its API is not stable. +# +# Since: 2.6 +## +{ 'command': 'x-blockdev-change', + 'data' : { 'parent': 'str', + '*child': 'str', + '*node': 'str' } } diff --git a/qmp-commands.hx b/qmp-commands.hx index 9d8b42f..c65d693 100644 --- a/qmp-commands.hx +++ b/qmp-commands.hx @@ -4285,6 +4285,53 @@ Example: EQMP { + .name = "x-blockdev-change", + .args_type = "parent:B,child:B?,node:B?", + .mhandler.cmd_new = qmp_marshal_x_blockdev_change, + }, + +SQMP +x-blockdev-change +------------ + +Dynamic reconfigure the block driver state graph. It can be used to +add, remove, insert, replace a block driver state. Currently only +the Quorum driver implements this feature to add and remove its child. +This is useful to fix a broken quorum child. + +Arguments: +- "parent": the id or node name of which node will be changed +- "child": the child name which will be delete +- "node": the new node-name which will be added + +Note: this command is experimental, and not a stable API. It doesn't +support all kinds of operations, all kindes of children, nor all block +drivers. + +Example: + +Add a new quorum's node +-> { "execute": blockdev-add", + "arguments": { "options": { "driver": "raw", + "node-name": "new_node", + "id": "test_new_node", + "file": { "driver": "file", + "filename": "test.raw" } } } } +<- { "return": {} } +-> { "execute": "x-blockdev-change", + "arguments": { "parent": "disk1", + "node": "new_node" } } +<- { "return": {} } + +Delete a quorum's node +-> { "execute": "x-blockdev-change", + "arguments": { "parent": "disk1", + "child": "children.2" } } +<- { "return": {} } + +EQMP + + { .name = "query-named-block-nodes", .args_type = "", .mhandler.cmd_new = qmp_marshal_query_named_block_nodes,