Message ID | 1446799373-6144-2-git-send-email-pl@kamp.de |
---|---|
State | New |
Headers | show |
On 11/06/2015 03:42 AM, Peter Lieven wrote: > PIO read requests on the ATAPI interface used to be sync blk requests. > This has two significant drawbacks. First the main loop hangs util an > I/O request is completed and secondly if the I/O request does not > complete (e.g. due to an unresponsive storage) Qemu hangs completely. > > Note: Due to possible race conditions requests during an ongoing > elementary transfer are still sync. > > Signed-off-by: Peter Lieven <pl@kamp.de> > --- > hw/ide/atapi.c | 97 ++++++++++++++++++++++++++++++++++++++++++++++++++-------- > 1 file changed, 85 insertions(+), 12 deletions(-) > > diff --git a/hw/ide/atapi.c b/hw/ide/atapi.c > index 747f466..29fd131 100644 > --- a/hw/ide/atapi.c > +++ b/hw/ide/atapi.c > @@ -105,33 +105,98 @@ static void cd_data_to_raw(uint8_t *buf, int lba) > memset(buf, 0, 288); > } > > -static int cd_read_sector(IDEState *s, int lba, uint8_t *buf, int sector_size) > +static int > +cd_read_sector_sync(IDEState *s, uint8_t *buf) > { > int ret; > > - switch(sector_size) { > +#ifdef DEBUG_IDE_ATAPI > + printf("cd_read_sector_sync: lba=%d\n", s->lba); > +#endif > + > + switch (s->cd_sector_size) { > case 2048: > block_acct_start(blk_get_stats(s->blk), &s->acct, > 4 * BDRV_SECTOR_SIZE, BLOCK_ACCT_READ); > - ret = blk_read(s->blk, (int64_t)lba << 2, buf, 4); > + ret = blk_read(s->blk, (int64_t)s->lba << 2, buf, 4); > block_acct_done(blk_get_stats(s->blk), &s->acct); > break; > case 2352: > block_acct_start(blk_get_stats(s->blk), &s->acct, > 4 * BDRV_SECTOR_SIZE, BLOCK_ACCT_READ); > - ret = blk_read(s->blk, (int64_t)lba << 2, buf + 16, 4); > + ret = blk_read(s->blk, (int64_t)s->lba << 2, buf + 16, 4); > block_acct_done(blk_get_stats(s->blk), &s->acct); > if (ret < 0) > return ret; > - cd_data_to_raw(buf, lba); > + cd_data_to_raw(buf, s->lba); > break; > default: > ret = -EIO; > break; > } > + > + if (!ret) { > + s->lba++; > + s->io_buffer_index = 0; > + } > + > return ret; > } > > +static void cd_read_sector_cb(void *opaque, int ret) > +{ > + IDEState *s = opaque; > + > + block_acct_done(blk_get_stats(s->blk), &s->acct); > + > +#ifdef DEBUG_IDE_ATAPI > + printf("cd_read_sector_cb: lba=%d ret=%d\n", s->lba, ret); > +#endif > + > + if (ret < 0) { > + ide_atapi_io_error(s, ret); > + return; > + } > + > + if (s->cd_sector_size == 2352) { > + cd_data_to_raw(s->io_buffer, s->lba); > + } > + > + s->lba++; > + s->io_buffer_index = 0; > + s->status &= ~BUSY_STAT; > + > + ide_atapi_cmd_reply_end(s); > +} > + > +static int cd_read_sector(IDEState *s, void *buf) > +{ > + if (s->cd_sector_size != 2048 && s->cd_sector_size != 2352) { > + return -EINVAL; > + } > + > + s->iov.iov_base = buf; > + if (s->cd_sector_size == 2352) { > + buf += 16; > + } > + > + s->iov.iov_len = 4 * BDRV_SECTOR_SIZE; > + qemu_iovec_init_external(&s->qiov, &s->iov, 1); > + > +#ifdef DEBUG_IDE_ATAPI > + printf("cd_read_sector: lba=%d\n", s->lba); > +#endif > + > + block_acct_start(blk_get_stats(s->blk), &s->acct, > + 4 * BDRV_SECTOR_SIZE, BLOCK_ACCT_READ); > + > + blk_aio_readv(s->blk, (int64_t)s->lba << 2, &s->qiov, 4, > + cd_read_sector_cb, s); > + > + s->status |= BUSY_STAT; > + return 0; > +} > + > void ide_atapi_cmd_ok(IDEState *s) > { > s->error = 0; > @@ -182,18 +247,27 @@ void ide_atapi_cmd_reply_end(IDEState *s) > ide_atapi_cmd_ok(s); > ide_set_irq(s->bus); > #ifdef DEBUG_IDE_ATAPI > - printf("status=0x%x\n", s->status); > + printf("end of transfer, status=0x%x\n", s->status); > #endif > } else { > /* see if a new sector must be read */ > if (s->lba != -1 && s->io_buffer_index >= s->cd_sector_size) { > - ret = cd_read_sector(s, s->lba, s->io_buffer, s->cd_sector_size); > - if (ret < 0) { > - ide_atapi_io_error(s, ret); > + if (!s->elementary_transfer_size) { > + ret = cd_read_sector(s, s->io_buffer); > + if (ret < 0) { > + ide_atapi_io_error(s, ret); > + } > return; > + } else { > + /* rebuffering within an elementary transfer is > + * only possible with a sync request because we > + * end up with a race condition otherwise */ > + ret = cd_read_sector_sync(s, s->io_buffer); > + if (ret < 0) { > + ide_atapi_io_error(s, ret); > + return; > + } > } > - s->lba++; > - s->io_buffer_index = 0; > } > if (s->elementary_transfer_size > 0) { > /* there are some data left to transmit in this elementary > @@ -275,7 +349,6 @@ static void ide_atapi_cmd_read_pio(IDEState *s, int lba, int nb_sectors, > s->io_buffer_index = sector_size; > s->cd_sector_size = sector_size; > > - s->status = READY_STAT | SEEK_STAT; > ide_atapi_cmd_reply_end(s); > } > > Reviewed-by: John Snow <jsnow@redhat.com> Stefan, do you have time to re-review the latter portion of this series before hard freeze? I'd like to get this series in before rc0 if at all possible, to benefit from all the RC testing. --js
diff --git a/hw/ide/atapi.c b/hw/ide/atapi.c index 747f466..29fd131 100644 --- a/hw/ide/atapi.c +++ b/hw/ide/atapi.c @@ -105,33 +105,98 @@ static void cd_data_to_raw(uint8_t *buf, int lba) memset(buf, 0, 288); } -static int cd_read_sector(IDEState *s, int lba, uint8_t *buf, int sector_size) +static int +cd_read_sector_sync(IDEState *s, uint8_t *buf) { int ret; - switch(sector_size) { +#ifdef DEBUG_IDE_ATAPI + printf("cd_read_sector_sync: lba=%d\n", s->lba); +#endif + + switch (s->cd_sector_size) { case 2048: block_acct_start(blk_get_stats(s->blk), &s->acct, 4 * BDRV_SECTOR_SIZE, BLOCK_ACCT_READ); - ret = blk_read(s->blk, (int64_t)lba << 2, buf, 4); + ret = blk_read(s->blk, (int64_t)s->lba << 2, buf, 4); block_acct_done(blk_get_stats(s->blk), &s->acct); break; case 2352: block_acct_start(blk_get_stats(s->blk), &s->acct, 4 * BDRV_SECTOR_SIZE, BLOCK_ACCT_READ); - ret = blk_read(s->blk, (int64_t)lba << 2, buf + 16, 4); + ret = blk_read(s->blk, (int64_t)s->lba << 2, buf + 16, 4); block_acct_done(blk_get_stats(s->blk), &s->acct); if (ret < 0) return ret; - cd_data_to_raw(buf, lba); + cd_data_to_raw(buf, s->lba); break; default: ret = -EIO; break; } + + if (!ret) { + s->lba++; + s->io_buffer_index = 0; + } + return ret; } +static void cd_read_sector_cb(void *opaque, int ret) +{ + IDEState *s = opaque; + + block_acct_done(blk_get_stats(s->blk), &s->acct); + +#ifdef DEBUG_IDE_ATAPI + printf("cd_read_sector_cb: lba=%d ret=%d\n", s->lba, ret); +#endif + + if (ret < 0) { + ide_atapi_io_error(s, ret); + return; + } + + if (s->cd_sector_size == 2352) { + cd_data_to_raw(s->io_buffer, s->lba); + } + + s->lba++; + s->io_buffer_index = 0; + s->status &= ~BUSY_STAT; + + ide_atapi_cmd_reply_end(s); +} + +static int cd_read_sector(IDEState *s, void *buf) +{ + if (s->cd_sector_size != 2048 && s->cd_sector_size != 2352) { + return -EINVAL; + } + + s->iov.iov_base = buf; + if (s->cd_sector_size == 2352) { + buf += 16; + } + + s->iov.iov_len = 4 * BDRV_SECTOR_SIZE; + qemu_iovec_init_external(&s->qiov, &s->iov, 1); + +#ifdef DEBUG_IDE_ATAPI + printf("cd_read_sector: lba=%d\n", s->lba); +#endif + + block_acct_start(blk_get_stats(s->blk), &s->acct, + 4 * BDRV_SECTOR_SIZE, BLOCK_ACCT_READ); + + blk_aio_readv(s->blk, (int64_t)s->lba << 2, &s->qiov, 4, + cd_read_sector_cb, s); + + s->status |= BUSY_STAT; + return 0; +} + void ide_atapi_cmd_ok(IDEState *s) { s->error = 0; @@ -182,18 +247,27 @@ void ide_atapi_cmd_reply_end(IDEState *s) ide_atapi_cmd_ok(s); ide_set_irq(s->bus); #ifdef DEBUG_IDE_ATAPI - printf("status=0x%x\n", s->status); + printf("end of transfer, status=0x%x\n", s->status); #endif } else { /* see if a new sector must be read */ if (s->lba != -1 && s->io_buffer_index >= s->cd_sector_size) { - ret = cd_read_sector(s, s->lba, s->io_buffer, s->cd_sector_size); - if (ret < 0) { - ide_atapi_io_error(s, ret); + if (!s->elementary_transfer_size) { + ret = cd_read_sector(s, s->io_buffer); + if (ret < 0) { + ide_atapi_io_error(s, ret); + } return; + } else { + /* rebuffering within an elementary transfer is + * only possible with a sync request because we + * end up with a race condition otherwise */ + ret = cd_read_sector_sync(s, s->io_buffer); + if (ret < 0) { + ide_atapi_io_error(s, ret); + return; + } } - s->lba++; - s->io_buffer_index = 0; } if (s->elementary_transfer_size > 0) { /* there are some data left to transmit in this elementary @@ -275,7 +349,6 @@ static void ide_atapi_cmd_read_pio(IDEState *s, int lba, int nb_sectors, s->io_buffer_index = sector_size; s->cd_sector_size = sector_size; - s->status = READY_STAT | SEEK_STAT; ide_atapi_cmd_reply_end(s); }
PIO read requests on the ATAPI interface used to be sync blk requests. This has two significant drawbacks. First the main loop hangs util an I/O request is completed and secondly if the I/O request does not complete (e.g. due to an unresponsive storage) Qemu hangs completely. Note: Due to possible race conditions requests during an ongoing elementary transfer are still sync. Signed-off-by: Peter Lieven <pl@kamp.de> --- hw/ide/atapi.c | 97 ++++++++++++++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 85 insertions(+), 12 deletions(-)