@@ -648,14 +648,14 @@ static void hmp_info_pci_device(Monitor *mon, const PciDeviceInfo *dev)
dev->slot, dev->function);
monitor_printf(mon, " ");
- if (dev->class_info.has_desc) {
- monitor_printf(mon, "%s", dev->class_info.desc);
+ if (dev->class_info->has_desc) {
+ monitor_printf(mon, "%s", dev->class_info->desc);
} else {
- monitor_printf(mon, "Class %04" PRId64, dev->class_info.q_class);
+ monitor_printf(mon, "Class %04" PRId64, dev->class_info->q_class);
}
monitor_printf(mon, ": PCI device %04" PRIx64 ":%04" PRIx64 "\n",
- dev->id.vendor, dev->id.device);
+ dev->id->vendor, dev->id->device);
if (dev->has_irq) {
monitor_printf(mon, " IRQ %" PRId64 ".\n", dev->irq);
@@ -663,25 +663,25 @@ static void hmp_info_pci_device(Monitor *mon, const PciDeviceInfo *dev)
if (dev->has_pci_bridge) {
monitor_printf(mon, " BUS %" PRId64 ".\n",
- dev->pci_bridge->bus.number);
+ dev->pci_bridge->bus->number);
monitor_printf(mon, " secondary bus %" PRId64 ".\n",
- dev->pci_bridge->bus.secondary);
+ dev->pci_bridge->bus->secondary);
monitor_printf(mon, " subordinate bus %" PRId64 ".\n",
- dev->pci_bridge->bus.subordinate);
+ dev->pci_bridge->bus->subordinate);
monitor_printf(mon, " IO range [0x%04"PRIx64", 0x%04"PRIx64"]\n",
- dev->pci_bridge->bus.io_range->base,
- dev->pci_bridge->bus.io_range->limit);
+ dev->pci_bridge->bus->io_range->base,
+ dev->pci_bridge->bus->io_range->limit);
monitor_printf(mon,
" memory range [0x%08"PRIx64", 0x%08"PRIx64"]\n",
- dev->pci_bridge->bus.memory_range->base,
- dev->pci_bridge->bus.memory_range->limit);
+ dev->pci_bridge->bus->memory_range->base,
+ dev->pci_bridge->bus->memory_range->limit);
monitor_printf(mon, " prefetchable memory range "
"[0x%08"PRIx64", 0x%08"PRIx64"]\n",
- dev->pci_bridge->bus.prefetchable_range->base,
- dev->pci_bridge->bus.prefetchable_range->limit);
+ dev->pci_bridge->bus->prefetchable_range->base,
+ dev->pci_bridge->bus->prefetchable_range->limit);
}
for (region = dev->regions; region; region = region->next) {
@@ -1456,24 +1456,26 @@ static PciBridgeInfo *qmp_query_pci_bridge(PCIDevice *dev, PCIBus *bus,
int bus_num)
{
PciBridgeInfo *info;
+ PciMemoryRange *range;
- info = g_malloc0(sizeof(*info));
+ info = g_new0(PciBridgeInfo, 1);
- info->bus.number = dev->config[PCI_PRIMARY_BUS];
- info->bus.secondary = dev->config[PCI_SECONDARY_BUS];
- info->bus.subordinate = dev->config[PCI_SUBORDINATE_BUS];
+ info->bus = g_new0(PciBusInfo, 1);
+ info->bus->number = dev->config[PCI_PRIMARY_BUS];
+ info->bus->secondary = dev->config[PCI_SECONDARY_BUS];
+ info->bus->subordinate = dev->config[PCI_SUBORDINATE_BUS];
- info->bus.io_range = g_malloc0(sizeof(*info->bus.io_range));
- info->bus.io_range->base = pci_bridge_get_base(dev, PCI_BASE_ADDRESS_SPACE_IO);
- info->bus.io_range->limit = pci_bridge_get_limit(dev, PCI_BASE_ADDRESS_SPACE_IO);
+ range = info->bus->io_range = g_new0(PciMemoryRange, 1);
+ range->base = pci_bridge_get_base(dev, PCI_BASE_ADDRESS_SPACE_IO);
+ range->limit = pci_bridge_get_limit(dev, PCI_BASE_ADDRESS_SPACE_IO);
- info->bus.memory_range = g_malloc0(sizeof(*info->bus.memory_range));
- info->bus.memory_range->base = pci_bridge_get_base(dev, PCI_BASE_ADDRESS_SPACE_MEMORY);
- info->bus.memory_range->limit = pci_bridge_get_limit(dev, PCI_BASE_ADDRESS_SPACE_MEMORY);
+ range = info->bus->memory_range = g_new0(PciMemoryRange, 1);
+ range->base = pci_bridge_get_base(dev, PCI_BASE_ADDRESS_SPACE_MEMORY);
+ range->limit = pci_bridge_get_limit(dev, PCI_BASE_ADDRESS_SPACE_MEMORY);
- info->bus.prefetchable_range = g_malloc0(sizeof(*info->bus.prefetchable_range));
- info->bus.prefetchable_range->base = pci_bridge_get_base(dev, PCI_BASE_ADDRESS_MEM_PREFETCH);
- info->bus.prefetchable_range->limit = pci_bridge_get_limit(dev, PCI_BASE_ADDRESS_MEM_PREFETCH);
+ range = info->bus->prefetchable_range = g_new0(PciMemoryRange, 1);
+ range->base = pci_bridge_get_base(dev, PCI_BASE_ADDRESS_MEM_PREFETCH);
+ range->limit = pci_bridge_get_limit(dev, PCI_BASE_ADDRESS_MEM_PREFETCH);
if (dev->config[PCI_SECONDARY_BUS] != 0) {
PCIBus *child_bus = pci_find_bus_nr(bus, dev->config[PCI_SECONDARY_BUS]);
@@ -1494,21 +1496,23 @@ static PciDeviceInfo *qmp_query_pci_device(PCIDevice *dev, PCIBus *bus,
uint8_t type;
int class;
- info = g_malloc0(sizeof(*info));
+ info = g_new0(PciDeviceInfo, 1);
info->bus = bus_num;
info->slot = PCI_SLOT(dev->devfn);
info->function = PCI_FUNC(dev->devfn);
+ info->class_info = g_new0(PciDeviceClass, 1);
class = pci_get_word(dev->config + PCI_CLASS_DEVICE);
- info->class_info.q_class = class;
+ info->class_info->q_class = class;
desc = get_class_desc(class);
if (desc->desc) {
- info->class_info.has_desc = true;
- info->class_info.desc = g_strdup(desc->desc);
+ info->class_info->has_desc = true;
+ info->class_info->desc = g_strdup(desc->desc);
}
- info->id.vendor = pci_get_word(dev->config + PCI_VENDOR_ID);
- info->id.device = pci_get_word(dev->config + PCI_DEVICE_ID);
+ info->id = g_new0(PciDeviceId, 1);
+ info->id->vendor = pci_get_word(dev->config + PCI_VENDOR_ID);
+ info->id->device = pci_get_word(dev->config + PCI_DEVICE_ID);
info->regions = qmp_query_pci_regions(dev);
info->qdev_id = g_strdup(dev->qdev.id ? dev->qdev.id : "");
@@ -1041,36 +1041,75 @@
'*prefetch': 'bool', '*mem_type_64': 'bool' } }
##
+# @PciBusInfo:
+#
+# Information about a bus of a PCI Bridge device
+#
+# @number: primary bus interface number. This should be the number of the
+# bus the device resides on.
+#
+# @secondary: secondary bus interface number. This is the number of the
+# main bus for the bridge
+#
+# @subordinate: This is the highest number bus that resides below the
+# bridge.
+#
+# @io_range: The PIO range for all devices on this bridge
+#
+# @memory_range: The MMIO range for all devices on this bridge
+#
+# @prefetchable_range: The range of prefetchable MMIO for all devices on
+# this bridge
+#
+# Since: 2.4
+##
+{ 'struct': 'PciBusInfo',
+ 'data': {'number': 'int', 'secondary': 'int', 'subordinate': 'int',
+ 'io_range': 'PciMemoryRange',
+ 'memory_range': 'PciMemoryRange',
+ 'prefetchable_range': 'PciMemoryRange' } }
+
+##
# @PciBridgeInfo:
#
# Information about a PCI Bridge device
#
-# @bus.number: primary bus interface number. This should be the number of the
-# bus the device resides on.
-#
-# @bus.secondary: secondary bus interface number. This is the number of the
-# main bus for the bridge
-#
-# @bus.subordinate: This is the highest number bus that resides below the
-# bridge.
-#
-# @bus.io_range: The PIO range for all devices on this bridge
-#
-# @bus.memory_range: The MMIO range for all devices on this bridge
-#
-# @bus.prefetchable_range: The range of prefetchable MMIO for all devices on
-# this bridge
+# @bus: information about the bus the device resides on
#
# @devices: a list of @PciDeviceInfo for each device on this bridge
#
# Since: 0.14.0
##
{ 'struct': 'PciBridgeInfo',
- 'data': {'bus': { 'number': 'int', 'secondary': 'int', 'subordinate': 'int',
- 'io_range': 'PciMemoryRange',
- 'memory_range': 'PciMemoryRange',
- 'prefetchable_range': 'PciMemoryRange' },
- '*devices': ['PciDeviceInfo']} }
+ 'data': {'bus': 'PciBusInfo', '*devices': ['PciDeviceInfo']} }
+
+##
+# @PciDeviceClass:
+#
+# Information about the Class of a PCI device
+#
+# @desc: #optional a string description of the device's class
+#
+# @class: the class code of the device
+#
+# Since: 2.4
+##
+{ 'struct': 'PciDeviceClass',
+ 'data': {'*desc': 'str', 'class': 'int'} }
+
+##
+# @PciDeviceId:
+#
+# Information about the Id of a PCI device
+#
+# @device: the PCI device id
+#
+# @vendor: the PCI vendor id
+#
+# Since: 2.4
+##
+{ 'struct': 'PciDeviceId',
+ 'data': {'device': 'int', 'vendor': 'int'} }
##
# @PciDeviceInfo:
@@ -1083,13 +1122,9 @@
#
# @function: the function of the slot used by the device
#
-# @class_info.desc: #optional a string description of the device's class
+# @class_info: the class of the device
#
-# @class_info.class: the class code of the device
-#
-# @id.device: the PCI device id
-#
-# @id.vendor: the PCI vendor id
+# @id: the PCI device id
#
# @irq: #optional if an IRQ is assigned to the device, the IRQ number
#
@@ -1106,8 +1141,7 @@
##
{ 'struct': 'PciDeviceInfo',
'data': {'bus': 'int', 'slot': 'int', 'function': 'int',
- 'class_info': {'*desc': 'str', 'class': 'int'},
- 'id': {'device': 'int', 'vendor': 'int'},
+ 'class_info': 'PciDeviceClass', 'id': 'PciDeviceId',
'*irq': 'int', 'qdev_id': 'str', '*pci_bridge': 'PciBridgeInfo',
'regions': ['PciMemoryRegion']} }
A future patch will be using a 'name':{dictionary} entry in the QAPI schema to specify a default value for an optional argument (see previous commit message for more details why); but existing use of inline nested structs conflicts with that goal. This patch fixes one of only two commands relying on nested types, by breaking the nesting into an explicit type; it means that the type is now boxed instead of unboxed in C code, but the QMP wire format is unaffected by this change. Prefer the safer g_new0() while making the conversion, and reduce some long lines. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> --- hmp.c | 26 ++++++++-------- hw/pci/pci.c | 42 ++++++++++++++------------ qapi-schema.json | 90 ++++++++++++++++++++++++++++++++++++++------------------ 3 files changed, 98 insertions(+), 60 deletions(-)